135,049 used machines on RESALE, but how to find them? Machine Search
three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -DH250x3-III -TGL 30-2332 -Chuck size: Ø 250 mm -Cone: Short cone 8 Ø 140 mm -Bolt circle: Ø 172 mm -Through hole: Ø 80 mm -Weight: 28 kg
Bosch Injection Pump for MWM 232 for sale Bosch Number: 62801845
MWM 232 / 234 Water Pump MWM Part Numbers: 6.232.0.731.0010 ; 623207310010
Motor 1.3 kW/400 V/50 Hz/3 A, swivel -20° to +70°, pneumatic clamping, suction nozzle 80 mm
Safety switch, safety switch, TZ -AC-15 4 A 230 V -DC-13 4 A 24 V -Protection class: IP 67 -Number: 8x available -Price: per piece -Dimensions: 125/38/H42 mm -Weight: 0.1 kg
Safety control, safety door switch, safety switch, safety sensor, magnetic switch -Type: 161 271 AC -Protection class: IP 67 -Number: 18 available -Price: per piece -Dimensions: 75/40/H55 mm -Weight: 0.2 kg
diameter: 250 mm total power requirement: kW weight of the machine ca.: 0,05 t dimensions of the machine ca.: m 1 pc. three jaws chuck - diameter 250 mm bore 80 mm fastening: 4 pcs screws 135 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Anlaser for MWM 234 Motor: - 24V - 5.4kW - 9 teeth Bosch Number: 0001416024 / 0 001 416 024
MACC Metal Circular Saw K 225 Cutting capacity round up to 65 mm Saw blade 225 mm Vise opening 75 mm Speed 52 rpm Motor 0.75 kW, 230 V Weight approx. 32 kg
Wedge bar chucks, power chucks, three-jaw chucks, three-jaw lathe chucks -Chuck size: Ø 220 mm -Taper cone: Ø mm -Mounting hole circle: mm -Through hole: 50 mm -Exchangeable jaws: -Weight: 25 kg
diameter: 250 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 1 pc. three-jaws chuck - diameter 250 mm bore 75 mm with flange plate for mounting on milling table 0320 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 220 mm
MACC Metal Band Saw Special 280 CSO Section cap. up to 220 mm round Speeds 32/66 m/min. Coolant pump Attack Motor 2-stage 400 V incl. machine base Weight approx. 230 kg
Clamping table, clamping angle, T-slot table, rotary table, circular grinding unit, milling machine table -Attachment for a: TOS universal grinding machine -Table surface: 490 x 190 mm -T slots: 2 -Clamping table: rotatable, swiveling, movable -Dimensions: 490/190/H290 mm -Weight: 31 kg
Bezel, stick, lynette -Transfer in current condition as seen -Max. Passage: Ø 260 mm -Tip height: 370 mm -without: quills -Technical drawing: in the photos -Dimensions: 680/135/H830 mm -Weight: 92 kg
diameter: 250 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 1 pc. four jaw chuck - diameter 250 mm bore 75 mm KK 140 fastening: 4 pcs. screws M 16 / 170 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Stock number: 3898 CIRCULAR SAW Manufacturer: KALTENBACH, Type: TL 255 Specifications: Size sawing capacity 80 mm Ø Miter 45 - 90 + 30 degrees Size blade diameter 250 mm Weight: 60 kg
Bezel, stick, lynette -Max. Passage: Ø 212 mm -Tip height: 319 mm -Edition: gray cast iron -Technical drawing: in the photos -Dimensions: 610/120/H650 mm -Weight: 59 kg
Clamping angles, clamping angles, tombstones, clamping devices, mechanical clamping elements -Clamping angle: for workpiece clamping -Dimensions: 165/250/H127 mm -Wall thickness: 20 mm -Number: 1x angle available -Price: per piece -Weight: 12.4 kg/piece
Conveyor belt / belt flap / accumulation conveyor Working height approx. 850 mm, can be adjusted. Length approx. 800 mm Width approx. 450 mm Equipped with photocell to stop product when downstream machine occupies. Equipped with function pass-through flap -> straps stop as soon as the flap is lifted. Equipped with its own drive and controls. Fixed transport speed, no frequency converter installed. Machine runs flawlessly. New conveyor belts were installed.
Hacker feed roller, conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Feed roller: serrated -Roll diameter: 270 mm -Transport roller width: 626 mm -Total length: 626 mm -Shaft mount: 80 mm -Quantity: 1x piece available -Weight: 137 kg
Description Cycle lathe Chevalier FCL-2660 Details Year of construction 2008 Machine no. A40307 C52 Height 2,150 mm Width 2,100 mm Length 3,900 mm Bed width 450 mm Bed height 1,000 mm Bed length 3,600 mm Face plate Ø 620 mm Forkardt Chuck Ø 315 mm Max. workpiece lengths 1,800 - 2,000 mm Turning diameter over bed 660 mm Turning diameter over support 400 mm Center height 330 mm CNC Fagor Cycle Control Lynette Ø 400 mm Outer and inner bolsters
Clamping angle, clamping tower, clamping device, mechanical clamping elements -Clamping angle: for workpiece clamping -Dimensions: 450/245/H365 mm -Wall thickness: 26 mm -Surface: milled -Holes for workpiece clamping: 18/22/25 mm -Quantity: 1x angle available -Weight: 56 kg
MACC Metal Band Saw TRS 275 Saw blade Ø 275 mm Max. vise opening 100 mm Engine power (2-stage) 0.95 / 1.32 kW Speed 40 / 80 rpm Connection voltage 400 V Fuse 16 A Weight 91 kg Without a base, but can be purchased separately.
Belt / roll width: 30 mm Mains voltage: 230V, 50Hz Paper from 70 g/m², film from 80μ (duplex film)
Electric motor, three-phase motor -Power: 0.37 kW -Speed: 1380 rpm -Shaft: Ø 14 x 30 mm -Construction: B14 -Protection class: IP 44 -Dimensions: 225/196/H160 mm -Weight: 7.7 kg
Inv. Num. : 7827 Type: LKT 250D Producer: PRESSMONT Created: GO 2019 Parameters: Compressive force: 2500 kN Ram stroke: 250 mm Machine weight: 21000 kg
Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Piston: Ø 50 mm stroke: 200 mm -Piston rod: Ø 20 mm -Quantity: 1x available --Dimensions: 65/65/H580 mm -Weight: 4.2 kg
Mikron Universal Milling Machine Type 21D Heidenhain Control TNC 355 Tool holder ISO 40 21 spindle speeds from 40 - 4000 rpm Clamping table 350 x 700 mm Displacement distances: X=450 mm / Y=400 mm / Z=400 mm 400 V Control voltage 24 V Total weight approx. 2410 kg
Key data: 6 KW, 7 kVA, 400 V
Emergency power generator, power generator, Bauer GFS-6 ATS, unused, orig. packaging, never been in use! Continuous power of 6 kW / 7.4 kVA. LxWxH 1,070 mm x 745 mm x 815 mm Weight 180 kg Net weight. Easy operation and maintenance. Specifications: Max. power [kW/kVA/HP] 6.5 / 8 / 8.87 Continuous power [kW/kVA/HP] 6.0 / 7.4 / 8.15 Nominal voltage [V] 230 / 400V Frequency [Hz] 50 Speed [rpm] 3000 Power factor [cos f] 0.8 Tank capacity [L] 20 Housing colour RAL 3000 Running time approx. 8-10 hours per tank Operating noise: Sound pressure level LPA [7m] [db(A)] 75 Engine: Power 8 kW / 9.0 kVA / 10.8 hp 1 cyl. Diesel Fuel Type: Diesel Emission standard: none Number of cylinders 1 Starter Electric with Battery On-board voltage [V] 12V Battery voltage [Ah] 230 / 400V Cooling System Air Cooling Generator: Model 6.5 kW 3000 rpm Generator system Brushless, self- ...
ALDURO Professional Knife WASU 50-230V for perfect results when sharpening your knives ! Backward Sanding Belt 50 x 1000 mm Peel-off felt disc Motor 0.6 kW, 230 V Speed 2850 rpm Belt speed 15 m/sec. Weight approx. 20.5 kg
Product size max. L x330 x 160 mm, min. 75 x 40 x 5 mm
Pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 200 mm -Piston diameter: 80 mm -Piston rod: 22 mm -Total length: 445 mm -Total length extended: 645 mm -Price: per piece -Number: 2x available -Dimensions: 96/96/H445 mm -Weight: 6.6 kg
Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 600 mm -Piston diameter: 50 mm -Piston rod: 20 mm -Total length: 775 mm -Total length extended: 1375 mm -Dimensions: 65/65/H775 mm -Weight: 6 kg
Pneumatic cylinders, air cylinders, pneumatic stamps, air stamps, standard cylinders -Stroke: 250 mm -Piston diameter: 80 mm -Piston rod: 25 mm -Total length: 570 mm -Total length extended: 820 mm -Number: 4x available -Price: per piece -Dimensions: 96/96/H570 mm -Weight: 6.4 kg
Winding motor, drum winder for crane, trailing cable motor, gear motor, electric motor -Speed: 22.5 rpm -Performance: TA = 120 Ncm -Shaft: Ø 30 x 105 mm -Protection class: IP 54 -Number: 1x available -Price: per piece -Dimensions: 350/290/H195 mm -Weight: 22 kg
Siemens Control 828 D Circulation over bed 560mm Circulation via cross slide 390 Circulation via recess 810 mm Center width 3000 mm Headstock Borungh D1-8 Spindle Nose Bushing MK7xMK5 Spindle speed 3 steps, max 2500 Travel Quill 200 mm Diameter quill 75 mm Bed width 345 mm Overall length 5170 mm, width 2100 mm, height 2230 mm Net weight 4000 kg Accessories 2 x chip conveyor, glue bar lathe chuck, turret, quick-change holder, El. Handwheels. 3 x steady rests, coolant system, manuals
Standard coolers, car coolers, oil coolers, heat exchangers -Oil cooler -Cooler area: 300 x 300 mm -with: fan -Dimensions: 300/160/H360 mm -Weight: 9 kg
Description Cycle lathe Chevalier FCL-2460 Details Height 1,950 mm Width 1,600 mm Length 4,100 mm Bed width 410 mm Bed height 850 mm Bed length 2,300 mm Face plate and chuck possible by arrangement max. workpiece lengths 1,500 mm Turning diameter over bed 600 mm Turning diameter over support 360 mm Center height 300 mm CNC Fagor cycle control function untested Lynette possible by arrangement 4-speed revolver
Pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 250 mm -Piston: Ø 50 mm -Piston rod: Ø 20 mm -Dimensions: 63/63/H435 mm -Weight: 3.15 kg
Pneumatic cylinder, standard cylinder, air cylinder, pneumatic piston, air piston -Stroke travel: 200 mm -Piston: Ø 40 mm -Piston rod: Ø 16 mm -End position damping: adjustable on both sides -Dimensions: 54/54/H400 mm -Weight: 2.2 kg
Manufacturer: Alfa Laval Model: MRPX214 TGV-74 Function:Whey separator/ Cream separator Capacity: 10,000- 12.500 Litres/ Hou rMotor power:15 kW Electrics: 380V/ 50 Hz/ 3 Phase Bowl speed: 1450 rpm Tools Base PlateNew Control Panel New Water system ( Valves, pressure vessel, connections, etc.) Service Spare Parts : Dairy Machinery UK
Pneumatic cylinder, air cylinder, standard cylinder -Stroke: 200 mm -Piston: Ø 50 mm -Piston rod: Ø 20 mm -Dimensions: 65/65/H450 mm -Weight: 3 kg
Pneumatic cylinders, air cylinders, standard cylinders -Manufacturer: Westinghouse -Type: 521 295 180 0 -Piston rod: Ø 22 mm -Piston: Ø 80 mm -Stroke: 100 mm -Pressure: max. 10 bar -Quantity: 1 available -Weight: 7.2 kg
Tailstock, counter bearing for dividing head, dividing attachment -Tailstock comes: from a Gildemeister lathe -Tip height: 270 mm -Quill: electrically driven -Foot switch -Recording: MK5 -Number: 1x tailstocks available -Price: per piece -Dimensions: 820/250/H400 mm -Weight: 136 kg
Inv. Num. : 7796 Type: HSA 200 T Producer: Hidroliksan Created: 2022 Parameters: Operating hours: 1600 h Compressive force: 200 t Maximum stroke: 450 mm Top table length: 1600 mm Top table width: 1400 mm Speed (high): 250 mm/s Speed (down): 160 mm/s Working speed: 5-18 mm/s Machine height: 5000 mm Machine length: 3650 mm Machine width: 3400 mm Machine weight: 18,000 kg
Pneumatic cylinders, air cylinders, pneumatic stamps, air stamps, standard cylinders -Stroke: 220 mm (limited) -Piston diameter: 80 mm -Piston rod: 25 mm -Total length: 555 mm -Total length extended: 775 mm -Number: 2x available -Price: per piece -Dimensions: 95/95/H555 mm -Weight: 6.45 kg/piece
PLC control, line filter, line filter -Manufacturer: Siemens -Type: Simodrive 6SN 1111-0AA01-2EA0 -Line filter: for regulated feed -Power: 80 kW -Sine wave operation block current operation -Dimensions: 275/200/H480 mm -Weight: 23.1 kg
Flange bearing -Bore: Ø 20 mm -Mounting hole: Ø 12 mm -Bore distance: 64 mm -Dimensions: 130/130/H50 mm -Number: 16x available -Price: per piece -Weight each: 1.7 kg
maximum number of results exceeded
please refine your search
