jumbo 2 used for sale

max. plate width: 52 cm stamp width: 220 mm serial no.: 16548 plate punch for GTO or QM 46 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Power supply unit, converter, power supply, switching power supply -Phoenix Contact: TRIO-PS/1AC/24DC/10 -Input: 100-240 V -Output: 24 V -Price: per piece -Number: 2 pieces -Dimensions: 160/60/H130 mm -Weight: 1.4 kg

Workbench, work table, assembly bench -with: bench vice and 2 side tables -Workbench: 2045/720 mm, total height: 1100 mm -Vice: 380/150/H140 mm -Jaws: 115 x 20 mm, clamping width: 185 mm -Side tables: 500/500/H860 mm -Weight: 164 kg

number of heads: 2 0 drilling capacity diameter min.: 2 mm drilling capacity diameter max.: 14 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cooking and smoking system Kerres JET SMOKE RET-2250 Electrically heated Microprocessor control Integrated wood chip smoke generator in the door Dimensions approx. 168 x 107 x 250 cm Power 29 kW Operating voltage 400 V / 50 Hz

Ventilation duct, ventilation flap, ventilation system, filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings -Outer frame made of: galvanized sheet steel -Dimensions: 2510/1910/H205 mm -Weight: 120 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 100 mm -Piston diameter: 50 mm -Piston rod: 20 mm -Dimensions: 280/65/H65 mm -Weight: 2.2 kg

Product number: 2847 Type: TSRR-200SLD Serial number: 303 NL 2017 Year of construction: 2017 Content: 200 litres Heating: steam, 111 kg/h Mixing: 10 - 60 RPM Power: 3 x 400V, 50Hz, 2.2kW Dimensions: 1550 x 1250 x 1700 mm Weight: 440 kg With mixer / agitator

SPECIFICATIONS: Load capacity kg: 250 Chain length mm: 3500 Complete with remote control

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Stroke: 250 mm -Piston diameter: 40 mm -Piston rod: 16 mm -Price: per piece -Number: 2 pieces -Dimensions: 410/55/H55 mm -Weight: 1.5 kg/piece

Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 200 mm -Piston diameter: 32 mm -Piston rod: 12 mm -Max. Pressure: 10 bar -Price: per piece -Number: 2 pieces -Dimension: Ø 38 x 368 mm -Weight: 0.8 kg/piece

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Stroke: 80 mm -Piston diameter: 40 mm -Piston rod: 14 mm -Dimension: Ø 45 x 240 mm -Weight: 0.9 kg

2 x MTU 20V4000L63 complete power plant for sale 2 x 20V4000L63 generating sets total Each genset is 220 Kw at 1500 RPM total about 4.4 Mw with Stamford alternators system is 50 Hz and 2800 Kva Running hours are 20.000 and 30.000. respectively Gen sets year of manufacture is 2010

sheet width: 0400 mm coil outside dia.: 460 - 530 mm weight max. in kg: 2 x 2000 kg plate thickness: 0,40 - 3,00 mm coil outside - diam. ca.: 1500 mm nomb. of straightening rolls: 9 diam. of the rolls ca.: 30 mm speed: 0-40 m/min total power requirement: 15 kW weight of the machine ca.: 5,20 t dimensions of the machine ca.: m - straightening machine type KRE 30.400/9 with infinitely variable drive, motoric adjustment of the roller cassette, rapid clamping device - double decoiler type 2000.2 H with pneumatic lag brake, hydraulic expansion, hydraulic snubber roll - coil loop control via ultrasound The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 200 mm -Piston diameter: 25 mm -Piston rod: 10 mm -Price: per piece -Number: 6 pieces -Dimensions: 343/28/H28 mm -Weight: 0.85 kg/piece

Starter Bosch -Voltage: 24 V -Type plate: 113445 24V E5200 -Tooth: 12 -Price: per piece -Number: 2 pieces -Dimensions: 440/220/H155 mm -Weight: 28 kg/piece

Gear motor, offset gear motor, electric motor, three-phase motor, electric gear motor -Speed: 104 rpm -Power: 4 kW -Motor type: SK 112M/4 -Construction: B3/B5 -Shaft: Ø 30 x 70 mm -Protection class: IP 55 -Dimensions: 550/285/H260 mm -Weight: 49 kg

Specifications: -working width 230 mm -feeding speed 5-25 m/min. -working height 130 mm -number of spindles 9 -configuration down-right-left-right-up-down-left-up-down -total power about 45 kW -

Model: 25tm Power supply: 380 V / 50 Hz Speeds: 2 Country of origin: Italy

Banding machine for folding boxes incl. inline feeding system, stacking device, PLC ELAU, type PacDrive Max-4 etc.

clamping force: 600 kN injection volume: 144 cm³ screw diameter: 35 mm platen size: 570 x 570 mm closing stroke: 500 mm Condition: used Specification: Horizontal injection moulding machine clamping unit: - Clamping force max.: 600 kN - clamping platens: 570 x 570 mm - clear column distance: 370 x 370 mm - Distance between the mould mounting platens: 750 mm - Mould installation height: 250 mm - Opening stroke max.: 500 mm - Ejector travel hyd. Ejector stroke: 175 mm - Ejector force max.: 40 kN Injection unit: - Screw diameter: 35 mm - Screw length: 20D - Screw stroke max.: 150 mm - Max. dosing volume: 144 cm³ - Moulded part weight: 121 g - Injection pressure: 1,820 bar - Injection flow max.: 154 cm³/s - Screw peripheral speed: 57 m/min - Screw torque max.: 440 Nm - Barrel and nozzle heating: 1600 +  ...

Three-jaw chuck, three-jaw lathe chuck -Chuck size: 240 mm -Mounting flange: M80 x 6 mm -without: interchangeable jaws -Weight: 26 kg

Key data: 10000 , 12000 , 11000

Wartsila 1 x 20V34SG complete power plant 9.7 Mw at 750 RPM 50 Hz 11 kV and 12000 KVA total 1 unit 20V34SG generating set with ABB AMG 1120LT08DSE alternator Year of make is 2011 39.000 Running hours. In good, running condition

DIXIE UNION, DIXIEVAC2000 Thermoformer, 400 Volt, 50 HZ, in working condition

Heating fan, mobile heater, gas heater, gas blower -Power output: adjustable from 50 to 100 kW -Length: 560 -Width: 350 mm -Height: 500 mm -Gas type: Propane -Quantity: 1 available Price: per piece -Weight: 16 kg

Frequency converter, frequency converter, drive converter, controller, variable speed drive, power supply -AC power source: ZAF 0.5/270/2 -Line In: 90-264 VAC 47-63 Hz -Output: 500 VA Max -Dimensions: 560/430/H95 mm -Weight: 18.6 kg

Clamping plate, welding table, welding table, straightening plate -Steel table -Length: 2200 mm -Width: 1255 mm -Height: 705 mm -Panel thickness: 69 mm -Weight: 1396 kg

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Stroke: 200 mm -Piston diameter: 20 mm -Piston rod: 8 mm -Price: per piece -Number: 2 pieces -Dimension: Ø 27 x 330 mm -Weight: 0.3 kg/piece

Key data: 20 t, 600 mm, 600 mm

We offer our reliable Amada Aries-222 punching machine for sale here. The machine is fully functional. The associated tool kit is complete and the machine is fully equipped.

Transnorm conveyor belt GF 2250-600-500 RA2056 Technical data: Conveyor length (NL): 2250 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,67 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 2250 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 Conveyor speed m / s: 0,67 scope of d ...

Transnorm conveyor belt GF 2350-600-500 RA2191 Technical data: Conveyor length (NL): 2350 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,67 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 2350 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 Conveyor speed m / s: 0.67 scope of d ...

Notching width: max. 200 mm Notching depth: 40 mm Profile height: max. 100 mm Vise span: 100 mm Feed length: max. 500 mm Speed: 2,800 rpm Electric milling feed by actuating the foot switch Profile tension by means of infinitely swivelling vice.

-Pastry cutting table Manufacturer: A. Fritsch GmbH & Co KG -Type: FT250/700 -400 volts -with 2 cutting rollers -mobile on castors -400 volts -External dimensions approx.: 260x88cm and 110cm high

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer diameter: 250 mm -Hole circle: Ø 170 mm -Dimensions: Ø 250/38 mm -Weight: 9 kg

Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Roll diameter: 248 mm -Transport roller width: 610 mm -Hole: Ø 30 x 60 mm, Ø 25 x 75 mm -Dimensions: Ø 248 x 840 mm -Weight: 27 kg

- Bread Slicer Slicer & Bread Packing Machine -Manufacturer: P+S Mako Verpackungsmaschinen GmbH Pfitzenmaier & Söhne - Type packaging: Rianta 84-CSS/2000

The system was built for a very special drugstore product, for which the customer became insolvent after a short time. It consists of: - HASSIA-PILTZ FlexiBag BC 260 Double-lane, fully automatic, vertical flow-wrapping machine, for flat and tetrahedral bags, for heat-sealable films Bag width from 2x50mm to 2x80mm Trigger length 50 - 250mm Seam width cross: 2mm Seam width lengthwise: 5mm Packaging material roll: max. outer diameter 600mm, core diameter 76mm min. 80 cycles/min single or 2x80 cycles/min - Dosing scale - Rovema EE 54 folding carton erector for fully automatic erecting and gluing of boxes and trays from flat blanks made of solid or corrugated cardboard currently. Box dimensions L84 x W84 x H85mm Output power 25 boxes/min - Head flap capping station Takeover of the folding cartons and transport to the filling station, fixation under the filling station a ...

Z-roll forming machine for sheet metal of ventilation duct production max. 1.0 mm sheet thickness 2500 mm sheet width

Transnorm Rising falling Incline belt conveyor with leading belt GF 3200+6000+2500-700-600 RA2156 Technical data: Conveyor length (NL): 11700 mm ( 3200 mm arch + 6000 mm riser segment + 2500 mm leading ) frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0,42 Drive: SEW gear motor, R27 DT90S4/BMG/TH Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 11700 ( 3 ...

Transnorm Rising falling Incline belt conveyor with leading belt GF 800+2800+650-700-600 RA2205 Technical data: Conveyor length (NL): 4250 mm ( 800 mm arch + 2800 mm riser segment + 650 mm leading ) frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, R17DT71D4/BMG/TH Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2008 condition: good (used) Conveying length in mm: 4250 ( 8 ...

UPS Effekta Pegasus 200 kVA Uninterruptible power supply 3 phases Batteries were renewed 06/2019 and are tested all still have between 12.9 and 13.0 V and that after 3 months, are stored on a separate pallet the power supply is in 1A condition and does not come from the manufacturing industry 2 months return policy

Gebrauchte Maschine, in gutem Zustand.

Clamping bracket, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Version: heavy -Groove: 24 mm -Slot spacing: 80 mm Quantity: 1 piece -Dimensions: 360/285/H245 mm -Weight: 70 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 200 mm -Weight: 18 kg

Flange mounting, driving flange -Chuck flange with: driving pin -Outer: Ø 250 mm -Cone diameter: 140 mm -Weight: 13 kg

Flange mounting, driving flange -Chuck flange with: driving pin -Outer: Ø 260 mm -Cone diameter: 106 mm -Weight: 11 kg

Parallel Lathe MULLER & PESANT Between points: 2500 mm Maxi Ø on bench: 520 mm Maxi Ø over saddle: 280 mm Maxi diameter in brocken bed: 700 mm Spindle diameter: Ø 56 mm Spindle speed: from 12,5 to 1000 RPM TRIPAN Turret 3-jaws chuck Ø 250 mm Tailstock CM4 Auto feeds longitudinal + transversal Lubricant pump Voltage: 380 V Dimensions (L x W x H): 4000 x 1500 x 1600 mm Weight: approx 3,5 T

Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 225 mm -Feed flange: M55x4 -Tip: 57 mm -Passage: Ø 50 mm -one sentence: hard-hitting jaws -Weight: 20 kg

Four-jaw chuck, four-jaw lathe chuck -Chuck size: Ø 250 mm -Bolt circle: Ø 230 mm -Recess:Ø 210 mm -Passage: Ø 80 mm -Scope of delivery: as per pictures, without additional jaws -Weight: 19 kg

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 200 mm -Recess: Ø 160 mm -Bolt circle: Ø 180 mm -Passage: Ø 55 mm -Weight: 14 kg