127,275 used machines on RESALE, but how to find them? Machine Search
Spiral kneader, Fabr. Boku, Type MK 240 Ak-CSDT
Spiral mixer, Fabr.Diosna, SP 240 AD
x-travel: 2050 mm y-travel: 1100 mm z-travel: 800 mm Control: FANUC 18iM Super CAP II total power requirement: 22/26 kW weight of the machine ca.: 25 t dimensions of the machine ca.: 6,25 x3,3 x 3,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Punch for clipping machine Poly-Clip 274305 A 15-30 br for FCA 100, 140 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60 fax. 0048/33 812 58 36
turning diameter: 330 mm turning length: 510 mm control: FANUC 18i - T turning diameter over bed: 600 mm turning diameter over slide: 550 mm x-travel: 250 mm z - travel: 580 mm y-travel: 100 (±50) mm b-axis: 0.001 mm rapid travel x/y/z: 20/7,5/24/ m/min rapid taverse: B- Achse 20 m/min c-axis: 4.500/ 6.000 ° spindle passage: 76/ 45 mm spindle nose: A2#6 spindle turning speed range: 4.500/ 6.00 U/min spindle drive: 15/ 7,5 kW Turret: 12- fach Stationen Chip coveyor: Inkl. chuck: Hauptspindel 210 mm chuck: Subspindel 160 mm total power requirement: 50,7 kVA weight of the machine ca.: 4,9 t dimensions of the machine ca.: 3.118 x 1.705 x 2.076 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Hello here we offer you a used semi-automatic metal band saw / band saw from MEBA Type : 230 GA-H Year of manufacture : ca 2007 Good condition, The machine was in a training workshop. The sale of this machine is only made to tradesmen or entrepreneurs. A visit is possible. Technical data are copied from the manufacturer, so without guarantee of 100% accuracy Automatic band saw Metal band saw Meba 230 GA-H with mitre cut. Automatic band saw Meba 230GA-NC Technical data: Manufacturer: Meba -Type:230GA-H -BJ. Approx. 2006-2007 (estimated) -with control (automatic) -with coolant pump -mitre cut possible -weight approx. 400kg -2 speed levels -high current -cutting range 230mm (see photo)
Used RO station by EPURO type RO 2000 PL. New 2017. Technical data: Medium - water, Nominal capacity Q [m3/h] - 2.0, SDI -
Cutting machine HSM type ABW-ROTA-2200 Specifications: • for foils, cork, veneer, etc. • Rotational cross-section • Cutting width max. (mm): 2100 • Heating: included • Cooling: included
; Gross weight [kg]: 2760; Engine: Rehlko KD83L06T-AA56B; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: coolant heater and battery charger; Water Tank Volume [l]: 344
Manufacturer Erfurt Pressen Machine type Leinhaas Technology Country of origin Germany (BRD) Machine data Parameter Value Unit / Notes Max. press force 4500 kN Stroke rate (continuous) min. 15 strokes/min Max. stroke rate (tool designed for) 75 strokes/min Ram stroke 3 – 200 mm Ram adjustment 120 mm Installation height (min.) 600 mm Max. installation height 670 mm Dimensions of press table Press table length 2000 mm Press table width 1250 mm T-slots (press table) DIN 650 – 28 H12 Number of T-slots (table) 11 pcs Distance between T-slots 150 mm Dimensions of press ram Slide length 2000 mm Slide width 1200 mm T-slots (slide) DIN 650 – 22 H12 Number of T-slots (slide) 13 pcs Distance between T-slots 150 mm Press frame opening Side opening 900 mm Front opening 2200 mm Tool clamping Tool clamping height (upper tool) 80 mm Tool clamping h ...
die for clipping machines Poly-Clip FCA Poly Clip Art.Nr. : 273113 - Clipper M 07 / 30 mm , not coded for FCA 80 , 90, 100, 120, 140, 160 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60
MAJA ARTICLE NUMBER : 716-2690 PULL ROLLER FOR MAJA EVM3006 EF ,EVM 4006 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60
Incl. Coolant Heater and Battery Charger; Gross weight [kg]: 3177; Engine: Cummins QSL9-G7; Accessories: Tanker, Battery, Control Panel, Stahldach, Requesting a EUR.1 Certificate is possible for this Generator set., , Warranty:, 1 year for continuous use, 2 years for standby use; Water Tank Volume [l]: 995
ARISA S-2-400-260-FD mechanical press was built in 2000 in Spain by Arisa S.A. (now Nidec Press & Automation Co. (NP&A)). The machine on offer is an excellent choice for series production of components used in the broadly defined automotive or machinery industry. It enables precise punching and stamping of metal parts. All these machining processes are performed with a high press force of up to 400 tonnes, which, combined with a highly dynamic slider, guarantees the best machining results. The ARISA S-2-400-260-FD features a robust, stress-relieved gantry design with an open side wall. This design maintains high rigidity, stable parameters and repeatability during even the most intensive operations with high press force. It is distinguished by the use of two connecting rods, a flywheel drive and an eccentric pinion gear. This solution ensures even torque transmission and smooth and pr ...
die for clipping machines Poly-Clip FCA Poly Clip Art.Nr. : 273115 - Klipper M 07 / 30 mm c2, koddiert, für FCA 80 , 90, 100, 120, 140, 160 Request a Quote Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60
Matrices for single and double clippers 12974 21691 48158 73526 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60
Over 80 years experience in maintenance., Expert that jointly reflects on the ideal solution for your situation., 1,000 hours or one-year guarantee: optimal reliability., Available 24/7., Quickservice., We can always supply a replacement generator., Wide range of stock that can be supplied immediately.; Engine: 4006-23TAG3A; Accessories: Product features:
280T Servo Double Column Heating Press with Heating Plates We can offer you this press at a particularly low price, as the machine is already under construction and the original customer has withdrawn from the order for two identical machines. This makes it possible to purchase a high-quality servo-hydraulic double-column press with heating plates at attractive conditions and at comparatively short notice. The photos shown show similar, already built machines from the factory and serve as example pictures. Technical data + information: General information Press force: 280 t Type: Servo Double Column Heating Press Cylinder: 1 cylinder Guided tour: 4 column guides Clear width between the uprights: 1,250 mm Cylinder stroke: 600 mm Max. distance between heating plates: 800 mm Table height from the floor incl. damper plates and heating plate: 900 mm Total height approx.: 3, ...
Clip guide plate 36br and deflector for clipping machine FCA 160 Poly Clip Item Number : Clip guide plate - 200623 Deflector - 162262 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60
Multi-blade saw Paul type K 34 G 2200 Specifications: • Working width (mm): 2200 • Engine power (kW): 22 • Top rollers: with PU rings • Bottom rollers: corded • Saw shaft: included
The machine is in good technical condition, after prior agreement it is possible to test it. Max swing diameter 660 mm Max turned diameter 660 mm Main spindle: Speed range 35-5000 Main drive power 22/15 kW Max torque 349Nm Spindle bore 76 mm Chuck diameter 210 mm Indexing (C axis) 0.0001 Second spindle: Speed range 35-5000 rpm Power (10 min/constant) 18.5/15 kW Max torque 326 Nm Chuck diameter 210 mm Indexing (C axis) 0.0001 Coolant tank capacity 300 l Machine power 66 kVA Operating voltage 400 V / 50Hz Air pressure 5 bar, 500 l/min Control system MAZATROL Fusion 640 MT Flush cooling: Pump capacity 20 l / min Pump pressure 5 bar Accessories Technical documentation, chip conveyor with cooling, magazine for 20 tools B axis (positioned in 0.001, C axis, Y axis Indexing of the rotation position of the second spindle, Synchronization of the main and second spindles Tool pre-settin ...
Repair and Exchange service Repair and replacement service SERVICE Part: Spindle Controller Repair Type MDS-A-SP-220 For MAZAK Mitsubishi We repair your Mazak Mitsubishi component at the stated all-inclusive price or, depending on the effort, also cheaper. The amount of work is about 1-3 days. Urgent repairs are also possible. If you are interested in our articles or have any questions, please contact us beforehand by phone or email.
Electromechanical actuator for valves, valve drive, actuator, servomotor, air damper actuator -Manufacturer: Siemens/weishaupt, actuator for air dampers and gas dampers -Type: SQM45.291A9WH -Dimensions: 135/130/85 mm -Weight: 1.0 kg
Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Manufacturer: Festo, Standard cylinder type DSBC-40-250-PPSA-N3 -Stroke travel: 250 mm -Piston: Ø 40 mm -Piston rod: Ø 16 mm -Dimensions: 610/55/H55 mm -Weight: 2.2 kg
Repair and Exchange service Repair and replacement service SERVICE Part: Spindle Controller Repair Type MDS-A-SP-260 For MAZAK Mitsubishi We repair your Mazak Mitsubishi component at the stated all-inclusive price or, depending on the effort, also cheaper. The amount of work is about 1-3 days. Urgent repairs are also possible. If you are interested in our articles or have any questions, please contact us beforehand by phone or email.
Machine vise, sturdy vise, drill vise -Jaw width: 260 mm -Back height: 50 mm -Clamping depth: 265 mm -Dimensions: 580/260/H135 mm -Weight: 56 kg
Machine vise, sturdy vise, drill vise -Jaw width: 250 mm -Back height: 50 mm -Clamping depth: 270 mm -Dimensions: 640/440/H220 mm -Weight: 79 kg
Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Passage: Ø 76 mm -Hole circle: Ø 230 mm -Weight: 23 kg
Repair and Exchange service Repair and replacement service SERVICE Part: Spindle Controller Repair Type MDS-A-SPH-220 For MAZAK Mitsubishi We repair your Mazak Mitsubishi component at the stated all-inclusive price or, depending on the effort, also cheaper. The amount of work is about 1-3 days. Urgent repairs are also possible. If you are interested in our articles or have any questions, please contact us beforehand by phone or email.
Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Passage: Ø 91 mm -Hole circle: Ø 170 mm -Shot: short taper 8 -Weight: 47 kg
Hydraulic vice, machine vice, hydraulic vice, high pressure vice, hydraulic vice, NC power clamp, NC power vice -Handover: in the current state as viewed -Spindle bent: vice does not open -Machine vice: with turntable -Jaw width: 200 mm -Back height: 60 mm -Span width: max. 205 mm -Dimensions: 700/395/H205 mm -Weight: 117 kg
Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Manufacturer: Orsta, pneumatic cylinder A125-32x320 TGL 20744 -Stroke: 230 mm -Piston rod: Ø 32 mm, M20 x 1.5 -Dimensions: 610/155/H155 mm -Weight: 15.7 kg
Repair and Exchange service Repair and replacement service SERVICE Part: Spindle Controller Repair Type MDS-A-SPH-260 For MAZAK Mitsubishi We repair your Mazak Mitsubishi component at the stated all-inclusive price or, depending on the effort, also cheaper. The amount of work is about 1-3 days. Urgent repairs are also possible. If you are interested in our articles or have any questions, please contact us beforehand by phone or email.
Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 250 mm -Piston rod: Ø 38 mm -Dimensions: 168/168/575 mm -Weight: 18.4 kg
Pneumatic cylinders, air cylinders, pneumatic rams, air rams, compact cylinders -Pneumatic cylinder: ZIDP 200/100 -Stroke: 100 mm -Piston diameter: 200 mm -Piston rod: Ø 40 mm -Dimensions: 220/220/H450 mm -Weight: 23.5 kg
Repair and Exchange service Repair and replacement service SERVICE Part: Spindle Controller Repair Type MDS-B-SP-220 For MAZAK Mitsubishi We repair your Mazak Mitsubishi component at the stated all-inclusive price or, depending on the effort, also cheaper. The amount of work is about 1-3 days. Urgent repairs are also possible. If you are interested in our articles or have any questions, please contact us beforehand by phone or email.
4-application chucks, wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -Condition: hydraulic power chuck unused -Tensioning force: max 20 KN -Equipment: with soft interchangeable jaws -Chuck size: Ø 210 mm -Weight: 30.9 kg
maximum number of results exceeded
please refine your search
