jumbo 2 used for sale

CATALOG NO. 6904 TECHNICAL DATA - max width of the workpiece 230mm - max height of the workpiece 130mm 6 spindles: 1) horizontal bottom 230mm 5.5kW 2) vertical right 130mm 3) vertical left 130mm (2nd and 3rd spindle) 7.5kW 4) horizontal top 230mm 5.5kW 5) horizontal bottom 230mm 5.5kW 6) universal 230mm, 360° adjustable 5.5kW - all spindles adjustable up / down, right / left - spindle 1,2,3,4,5 equipped with an electric brake - spindle diameter 40mm - 5 introductory, toothed, pulling rollers from above - from above, 4 rollers, pulling, rubber, smooth, including 2 double - from the bottom, a rubber roller, pulling - feed on cardan shafts - rollers pressed pneumatically - smooth adjustment of the feed speed - feed motor 4kW - working pressure 6-10 bar - electric setting of planing thickness - motor lifting the body of about 0.55 kW - central lubrication of the co ...

Baler Paal Konti 200 D, built in 2000, optionally with matching conveyor belt Paal KEM-1400 Technical data: Manufacturer: Paal Type Paal Konti 200 D Year of construction 2000 Hours: 28155 Pressing force 60 t Drive power 45 kW Total connection 60 kW Filling opening 1020 x 1400 mm Bale dimensions 750 x 1100 mm, length variable 4-fold automatic tying throughput at 35 kg/m³ approx. 9.5 t/h 60 kg/m³ approx. 16.5 t/h 100 kg/m³ approx. 26 t/h Bale weight 450 to 650 kg Transport dimensions approx. 10123 x 2152 x 2720 mm (LxWxH) Machine weight approx. 15,000 kg Materials: paper, cardboard, foil The press is in good condition and has been inspected and tested. You can find a video on our website or YouTube channel. The complete documentation is available. Please note: All technical data refer to the manufacturer's specifications. We a ...

For sale is a ZF 220 transmission with ratio 1:1.500. The transmission is currently still installed on a Volvo Penta D5A-B TA, but can be disconnected at any time. This display expressly refers only to the gearbox shown.

coolant capacity: 10 m3l/h Headroom: 18 m operating pressure: 2 bar voltage: 230/400 V - 50 Hz motor type: 80 L motor speed: 2900 U/min engine output: 1,1 kW weight: 33 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 25516 Technical data: - Load capacity 3000 kg - Projection 1800 mm - Heel height approx. 3200 mm - Swivel radius approx. 360 ° - Column diameter approx. 380 mm - Column height / lower edge of the boom approx. 3700 mm - Height of the boom approx. 400 mm - Total height approx. 4250 mm Hoist - Load capacity 3000 kg - Drive 400 V / 1.0 / 1.8 kW. - Lifting speed approx. 0.75 / / 3.0 m/min - Operation of the chain hoist via handheld remote control - Movement of the electric chain hoist motorized via hand-held remote switch - Swivelling of the boom by hand - Total weight column-boom chain hoist approx. 800 kg

Technical data approx.: - Total load capacity driven + rotating unit 25000 kg - Payload per container device 12500 kg - Workpiece diameter approx. 500 - 4000 mm - Axle distance of the support rollers adjustable - Roll diameter 400 mm - Roll width 120 mm - infinitely adjustable rotational speed - Handheld remote control for re- and li. run - Drive 400 V - Space requirements Unit approx. W 3500 x H 850 x D 1000 mm - Platzb. with running unit approx. W 2700 x H 850 x D 800 mm - Weight applied Unit approx. 1300 kg - Weight with running unit approx. 900 kg

Technical data for the pallet rack traverse: Shelving system: Feralco Year of construction: 2021 The scope of delivery includes: 01x pallet rack traverse, used Material colour: RAL 2004 orange Box profile: 80 x 50 mm Truss type: 80 E15 Agraffe: 3 HK (hook) clear width: 2,700 mm load per pair of trusses 1,500 kg, at the same time. distributed load 02x locking pins, used Execution: compl. galvanized For securing the longitudinal members against unintentional lifting

central lubrication unit, MKU1-BW3-20015+428, SKF, new Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, Technical data: - Central lubrication unit, MKU1-BW3-20015+428, SKF, new - Container capacity 2.7 L - Pump 230V 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian la ...

The scope of delivery includes: 01x Shelf connector, used Material color: blue Manufacturer: Feralco for shelf spacing: approx. 200 mm Total length: approx. 200 mm Profile abm.: approx. 20 x 20 mm Headstock: approx. 100 x 40 x 4 mm Borehole Ø: approx. 9 mm (2 pcs per side) Weight: approx. 0.41 kg | Pcs.

sheet width: 2020 mm plate thickness: 2 mm control: Beijer daylight upper clamping: 100 mm Bending angle: 0 - 135 ° upper clamping drive: 0,375 kW bend clamping drive: 1,125 kW weight of the machine ca.: 2,6 t dimensions of the machine ca.: 3 x 1,1 x 1,75 m Foot switch with emergency stop: Segmented upper tool: Oil filling: exklusive Light barrier control: Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

central lubrication unit, MFE5-KW3-S22+299, Vogel, used Top Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - comes from a spare parts warehouse of a certified production facility, - is in very good condition and fully functional, Technical data: - Central lubrication unit, MFE5-KW3-S22+299, Vogel, used-Top - Gear pump MFE5-2000+299, - incl. switch box with motor protection and contactor, - incl. oil pressure hose - incl. 400V connection cable with CE plug - Test: Smooth pump operation and immediate delivery - Can be plugged in and used immediately Ensuring the function: In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is n ...

central lubrication unit, MFE5-KW3-S22+299, Vogel, used Top Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - comes from a spare parts warehouse of a certified production facility, - is in very good condition and fully functional, Technical data: - Central lubrication unit, MFE5-KW3-S22+299, Vogel, used-Top - Gear pump MFE5-2000+299, - Including conversion for connection of an oil supply line, - Test: Smooth pump operation and immediate delivery Ensuring the function: In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods can be returned within 2 weeks. We will refund the buyer maximum the pr ...

Specifications: Shelving system: Feralco suitable for clear width: approx. 2,710 mm Projection: approx. 100 mm The scope of delivery includes: 01x push-through protection, used Material colour: RAL 2004 orange Total length: approx. 2,787 mm Profile dimensions: approx. 35 x 35 mm including 2 agraffes Weight: 7,16 kg | Pcs. Left|right L flat iron welded on, which are screwed to the shelf stand.

Used paddle mixer made by Steiner, model: MB 2000 with heating jacket. Usable capacity 2000 L. The Steiner MB 2000 with a usable capacity of 2000 litres is a professional device that can be useful for various applications in the food, chemical, cosmetic and pharmaceutical industries. It is equipped with a weighing system, a heating jacket and a paddle mixer with built-in Teflon scrapers, which enable accurate collection of the product from the bottom of the tank and prevent burning. The device can be helpful in a wide range of production processes, such as mixing, heating, defrosting or melting ingredients. By using cold water in the jacket instead of hot water or steam, it can also be used to cool products. Both the tank and the shaft with agitators are made of 304 acid-resistant steel. Teflon scrapers at the ends of the very sturdy agitators effectively collect the product f ...

; Gross weight [kg]: 1250; Engine: JCB 448 TWGA; Accessories: Control Panel, Control cabinet including DSE panel and start-stop (shipped loose), Remote start ready, 12V starting motor and alternator, Double and switchable fuel filter, Pre-filter (shipped loose), Double walled fuel lines with leakage detection, Oil d

current capacity: max. 13 KW throat: 120 mm contact pressure capacity: max. 120 kp voltage: 400 V open-circuit voltage: 2,5 V welding power: max. 2 x 2mm Blech fuse protection -thermal: 16 A total power requirement: 13 kW weight of the machine ca.: 12 kg dimensions of the machine ca.: 0,5 x 0,1 x 0,2. m Manual spot welding machine with 2 sets of welding nozzles The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

New cabinet with DSE6120 panel and CHINT NM1LE-125S breaker 40A., Completely wired, 2 units available; Gross weight [kg]: 35

25m Stow Pal Rack Pallet Rack Manufacturer: Stow Type: Pal Rack System Shelf length approx. 25200 mm Column height: approx. 6000 mm Stand depth: approx. 1100 mm Stand Type: PLFB 16P Clear field width: 3600 mm Number of fields: 7 Number of levels: 6 Truss type: PNB 0436 Max. pallet weight: 1000 kg Permissible shelf load: 4000 kg Permissible field load: 20000 kg Stand surface: blue lacquered (RAL 5015) Year of manufacture: 2014/2020 Scope of delivery: 8 x stand 6000 x 1100 mm bay load 20000 kg blue 84 x crossbeam 3600 mm incl. locking pins shelf load 4000 kg orange More items - new and used - can be found in our shop! International shipping costs on request!

Offer 22523 Specifications: - Pressure capacity at 10 bar 35 KN - Plunger stroke 12 mm - Projection 95 mm - Installation height approx. 134 mm - Table size approx. 230 x 190 mm - Air consumption per stroke 8.0 l - Air inlet 6 - 10 bar - Space requirement approx. W 520 x H 1450 x D 600 mm - Weight approx. 100 kg - with: - Foot switch - Pressure gauge + pressure regulator - 4 x punching tool

25m Stow Pal Rack Pallet Rack Manufacturer: Stow Type: Pal Rack System Shelf length approx. 25200 mm Column height: approx. 6000 mm Stand depth: approx. 1100 mm Stand Type: PLFB 16P Clear field width: 3600 mm Number of fields: 7 Number of levels: 5 Truss type: PNB 0436 Max. pallet weight: 1000 kg Permissible shelf load: 4000 kg Permissible field load: 20000 kg Stand surface: blue lacquered (RAL 5015) Year of manufacture: 2014/2020 Scope of delivery: 8 x stand 6000 x 1100 mm bay load 20000 kg blue 70 x crossbeam 3600 mm incl. locking pins shelf load 4000 kg orange More items - new and used - can be found in our shop! International shipping costs on request!

Arburg 520C-2000-800 (193) Description with conveyor belt, bimetallic screw General Information SKU: 193 Availability: In stock Year of construction: 2005 Brand: Arburg Specifications Injection weight: 434 g Clamping force: 2,000 kN Screw diameter: 55 mm Spray pressure: 1650 bar Tie bar spacing: 520x520 mm Clamping plate size: 728x728 mm Tool installation height min.: 250 mm Control: Selogica Language: German Power: 44.9 kW Operating hours: 80000 h Weight: 7300 kg Dimensions: 6x2 m Funnel: No Core train: Yes Euromap: Yes

25m Stow Pal Rack Pallet Rack Manufacturer: Stow Type: Pal Rack System Shelf length approx. 25200 mm Column height: approx. 6000 mm Stand depth: approx. 1100 mm Stand Type: PLFB 16P Clear field width: 3600 mm Number of fields: 7 Number of levels: 4 Truss type: PNB 0436 Max. pallet weight: 1000 kg Permissible shelf load: 4000 kg Permissible field load: 20000 kg Stand surface: blue lacquered (RAL 5015) Year of manufacture: 2014/2020 Scope of delivery: 8 x stand 6000 x 1100 mm bay load 20000 kg blue 56 x crossbeam 3600 mm incl. locking pins shelf load 4000 kg orange More items - new and used - can be found in our shop! International shipping costs on request!

Lifting tipper König HK1100/2400 for Diosna boiler - Lifting tipper king - Type: HK 1100 / 2400 - for Diosna boiler - with boiler drive - with boiler cutter - Year of construction: 2009

Ref. 444_2 BASF nyloprint Dryer for Nyloprint plates Serial: 263 35 + 80° Functioning

Ref. 444_2 BASF nyloprint Dryer for Nyloprint plates Serial: 263 35 + 80° Functioning

Submersible pump, STA303/220+001, Brinkmann Pumps, mint condition Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Mint condition! - never been used and is in mint condition, - comes from a spare parts warehouse of a certified production facility, - has some storage marks due to the long storage period, Technical data: - 160L/min, 18m, - 240/400V 1,5KW, - Immersion depth 220mm, - Flange outer diameter 180mm, - Pitch circle diameter 160mm z=4, - 58x37x18cm, ca30kg 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential da ...

turning diameter: 235 mm turning length: 200 mm turning speeds: 6500 U/min control: Siemens 840D swing diameter: mm turning height: mm workpiece height max.: 100 mm spindle bearing diameter: 90 mm spindle head: A5 total power requirement: 41 kW weight of the machine ca.: 6500 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Meat mixer Laska Z 250 liters Mixing hopper: 250 liters Filling quantity max: 200kg Electrical power: 5.5kW Weight: 1380kg Delivery time: 30 days after advanced payment

Boiler Lifting Tipper Kemper HK 200 R - Boiler tipper Kemper - Model: HK 200 R - for Kemper 150 AL boiler - with boiler drive and boiler shearer - Built in 2005 - Total height 312cm

Ex-proof submersible pump, Rexa PRO V05DA-224/EAD3X2-T0039-540-0, Wilo, mint condition Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Mint condition! - never been used and is in mint condition, - comes from a spare parts warehouse of a certified production facility, - Due to unpackaged storage, there are storage marks (only on the paint surface – see photos). - Includes 10 m connection cable - Includes documentation Technical data: - Qmax 50m³/h, Hmax. 18.6m, - 400V 4.6 KW - approx. 55kg - We are not a specialist company for explosion-proof products and cannot take on the choice and testing process. 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the p ...

Haemonetics ACP 215 Automated Cell Processor. The ACP 215 Automated Cell Processor is the world's first and only automated, closed-loop red blood cell processing system. It minimizes the risk of bacterial contamination and provides donor centers and hospitals with the security and flexibility they need. Whether your facility is washing red blood cells, stockpiling rare blood supplies, or building a complete strategic blood bank program, Haemonetics is here to help you every step of the way to execute your entire plan.

TECHNICAL SPECIFICATIONS Manufacturer: KAUTZ Description: Elliptical shaker screen for light material separation Type: Wet screening Type: OSK 2071/2-W Number of screen decks: 2 Year of Make: 2005 Feed capacity: approx. 150 t/h Dimensions screen deck (length/width): 7,100 x 2,000 mm Screening area: 2 x 14.2 sqm Number of steps: 2 Screen covering deck 1: Synthetic Screen Covering Deck 2: Synthetic Strainer pan: available Chute car: available SPECIFIC COMMENT - Stepped screen deck with shower for separating light materials (wood, coal) - Many adjustment options due to water supply - Optimal machine for simultaneous screening and cleaning of the feed material - Only machine included in the scope of offer

Key data: 16 , 20 , 400

Hood unit 20 kVA PRP Power: 20 kVA / 16 kW PRP Operating mode: 1500 rpm Voltage: 400/230 V Power factor: 0.8 Stage 3A Engine: Deutz | F3M2011 Generator: Leroy Somer | TAL040 F Aggregate control: Automatic control panel WITHOUT Switching and WITHOUT mains control with Comap IL-NT AMF8 1 x 4-pole circuit breaker Leak detector Battery disconnect switch Battery charger Cooling water heating Voltage regulator Tank: 100 L / 21.3 hours at 75% load

DMG MORI NTX 2000/1500 SZM CNC turn-mill center was built in 2018 in Japan by DMG MORI CO., LTD. The machine on offer is an excellent choice for the mass production of precision parts, which are used in such industries as automotive or aerospace. This is because the NTX 2000/1500 SZM enables simultaneous turning and milling of workpieces with even the most complex geometries, in a single working cycle. The combination of these two processes significantly reduces production costs, as well as overall working time. The machining process is performed by using the state-of-the-art technology available on the market. It includes, among others, two spindles with a labyrinth cooling system. This system was designed for frequent use of high-pressure coolant. It ensures a constant zero-point height throughout the working cycle, regardless of the amount of generated heat. To limit the effect of  ...

Qty.1 Second-hand deep drawing press Mfc.: LVD Co. Type: EMF-TWI- 200SP Built: 1982 Stopped production in 2002 Tested in 2012 In operation condition! Max. pressure: 200 T (2000 kN) Max. oil pressure: 300 bar Max. hydr. stroke: 2300 mm Max. distance table – ram: 4500 mm Motor power: 250 HP (187 kW) Table & ram dim.: dia. 300 mm Closing speed: 160/80 mm/sec. Working speed: 3507175 mm/sec. Cushion Max. capacity: 2 x 1000 kN Max. oil pressure: 300 bar Max. hydr. stroke: 2000 mm Table dim.: 1800 x 1800 mm Motor power: 75 HP (56 kW) Plate holder Plate holder dim.: 250 mm Plate holder stroke: 1000 mm Motor power: 25 HP (19 kW), 3 x220 V Weight: 75 Ton Pumps Main pump: 3 x A7V355LV 1RPFHO Pilot pump: Vickers V210-5-1A-10-5214 Tank Volume: 3350 L

Tehabo Model ERU 2500

MEMBRANE SKINNER, MAJA, MODEL: EVM 2000 Technical description: Serial number: 38280 Power supply: 380 V, 3 Ph, 50 Hz, 2.2 A, 0.75 kW Working widht: 420 mm Dimensions: 700 X 700 X 1000 mm

Offer 26038 The slab can be viewed at the 02943 Boxberg location by appointment. Technical data approx.: - Plate length approx. 3000 mm - Plate width approx. 2500 mm - Top height without base approx. 350 mm - Top height with base approx. 870 mm - Thickness of the top plate approx. 75 mm - 9 T-slots in table surface length 6000 mm - Center distance of the T-slots in the table surface 250 mm each - Center distance of the T-slots from outer edge 125 mm - T - groove width approx. mm - T - groove depth approx. mm - Space required: L 3000 x D 2500 x H 870 mm - Weight approx. 8000 kg

Stock# UG6359 Little used automatic tube filling machine by Pablo (PL) model TB-250. Machine can work on filling plastic tubes (PE/PP). Dose range from 5 - 250 ml. Machine can run on tubes with diameters: 19, 25, 30, 35, 40, 50 mm. Height of tubes in range from 10 up to 210 mm. Working output depends on product and size of tube. For tubes with diameter 25-30 mm - in range from 3000 - 5000 pcs/h. Power consumption 7 kW, 3/400 V, 50/60 hz. Compressed air 6 bar. Cooling water connection dia 10 mm, outlet diameter 8 mm. Machine new 2020. Shipping dims: 1991 mm x 1441 mm x h 2300 mm/2600 mm (with pole) x weight 800 kg.

The refrigeration system was used by us for 1 year in the rental. The chiller has 2 refrigeration circuits and fan control. the cooling capacity is 240kW at 7/12°C and 35°C ambient temperature. the refrigerant used is R140a

VACUUM MASSAGER, INJECT STAR TYPE: MAGNUM 2600 Technical description: Serial number: 559 Capacity: 2600 l Power supply: 380-440V/50-60 Hz, 3ph Power: 7 Kw Drum size: 1300 x 2450 mm Dimensions: 3200 x 1500 x 1950 mm

The machine is in good technical condition, after prior agreement it is possible to test it. Max. turning diameter over the bed 450 mm Max. machining diameter 320 mm Max. machining length 500 mm Distance between centers approx. 640 mm X-axis travel 160 mm Z-axis travel 540 mm Spindle bore diameter 65 mm Spindle taper CM4 Max. spindle speed 4,000 rpm Main motor power approx. 15 kW Turret head 8–12 tools Tool clamping type VDI Control system FANUC 18T (most common) Tailstock Usually no Bar feeder No Machine dimensions (L × W × H) approx. 3,650 × 1,200 × 1,980 mm Weight approx. 4,800 kg Power supply 400 V / 50 Hz

AUTOMATIC PROCESS MACHINE FOR LIQUIDS FOODS, KARL SCHNELL TIPO: 250 Technical description: Machine number: 25162 Year: 2001 Two knives Nominal volume: 300L Dimensions: 1500 x 1150 x 2350 mm QUALITY HAS A NAME Customers demand equipment that meets their individual requirements and they demand machines that produce a high quality end-product at lowest possible costs. Combining these fundamental considerations with technical know-how, KS builds machines that are simple to use and extremely durable. Main application field of the B 22 is the production of low to middle viscous emulsions and suspensions. Typical applications are the production of: Soup, sauce and gravy Ketchup aund mayonnaise Fish farce Injection brine Pate and tureen As well as The reconditioning of rework The preparation of process materials, such as additives and spices for the sausage-, petfood- and processed cheese p ...

The machine is in good technical condition, after prior agreement it is possible to test it. Maximum turning diameter: 400 mm Maximum revolving diameter: 760 mm Maximum machining length: 680 mm Maximum spindle passage: 75 mm Travels in the X/Z/Y axes: 250/750/+-50 mm Rapid traverses X/Z/Y: 30/30/12 m/min Machine weight: 6000 kg Machine dimensions: 3230 × 2100 × 2252 mm Fanuc drive performance parameters: Spindle motor power: 15 / 18.5 kW Maximum spindle speed (2 speeds): 0–875 / 0–3500 rpm⁻ Turret power for driven holders: 3.7 / 5.5 kW (30 min) Maximum speed of driven holders: 6000 rpm Servo motor power for X/Z/Y axes: 2.7 / 2.7 / 2.7 kW Cooling pump motor power: 0.5 kW Maximum torque on the MK spindle: 527 / 757 (30 min) N m Maximum torque of driven holders: 35 N m (15 min, 1500 rpm) Recommended clamping pressure range for clamping: 0.35 MPa – 3 MPa

MOOG E122-205-006

VACUUM MASSAGER, INJECT STAR TYPE: MAGNUM 2600 Technical description: Serial number: 3730 Capacity: 2600 l Power supply: 380-440V/50-60 Hz, 3ph Power: 7 Kw Tumbler dimensions: 1300 x 2450 mm Dimensions: 3270 x 1850 x 1900 mm With this machine you are in a position to massage meat at any time, fully automatically and at maximum, so that the general appearance and flavour is improved, as well as the structural loosening up of the meat and the essential assimilation of both the natural juices and injected brine, by binding in, is achieved. HOMOGENEOUS BRINE DISTRIBUTION Sealing-in of Protein: The binding of the surface cells, seals off the inner moisture and prevents drying out. Optimum Protein-Water-Ratio: Whether you massage ham, shoulder, loin, tongue, belly, brisket or rough and fine fillings for cooked, boiled, raw and preserved sausage, whole chickens or chicken parts, fish or othe ...

pressure control valve, R6V10 595 W0 B1 220, Denison, mint condition Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Mint condition! - never been used and is in mint condition, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law applies without exception and court location St. Pölten.

Machine Details Stock-No. 1105-03852 Type of machine milling machining centers - vertical Make DAH LIH SONGS Type LIEDER MCV 2600 Year of manufacture 2015 Type of control CNC Storage location FRANCE Country of origin taiwan Delivery time immediately Freight basis free loaded on truck, ex works Price Technical details X-Travel 2600 mm Y-Travel 870 mm Z-Travel 760 mm table surface area 2800 x 970 mm control HEIDENHAIN TNC 530 spindle turning speed range 12000 rpm spindle drive 15 kW tool adaptor BT 40 Internal Coolant System Feed 20 bar Feed 10 m/min Rapid Traverse 20/20/30 m/min total power requirement 25 kW Additional information used vertical machinig centre witH dual arm toolchanger BT 40 HEIDENHAIN TNC 530 - Dual toolchanger - synchronised tapping - internal coolant with filter - Spindle Oil Cooling 32 TOOLS MAGASIN COOLING TROUGHT THE SPINDLE 20 BAR ...