126,612 used machines on RESALE, but how to find them? Machine Search
USED SIHI ZSKQ 2501 DN90L-2 REFRIGERATED CENTRIFUGAL PUMP
Didar Part Number 0697210002 NSN 12-334-9607 Original Part Number 0020984020 In-Pipe Water Pressure 4 – 6 bar Out of Pipe Air Pressure 4 – 7 bar In-Pipe Water Temperature 90 °C Outside Pipe Air Temperature 200 °C Amount of Water in the Pipe 17 Lt. Amount of Air Outside the Pipe 63 Lt.
; Gross weight [kg]: 2068; Engine: 1506A-E88TAG3; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 528
; Gross weight [kg]: 2058; Engine: Perkins 1106A-70TAG3; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 394
; Power [PS]: 239; Gross weight [kg]: 2043; Engine: Perkins 1106A-70TAG4; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 394
; Power [PS]: 272; Gross weight [kg]: 2782; Engine: Perkins 1506A-E88TAG2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: battery charger and coolant heater; Water Tank Volume [l]: 528
TECHNICAL DATA: Manufacturer: ROHR Bagger GmbH Type: HDH 236 Year of construction: 2001 Drive power: 187.5 kW Weight: 2,500 kg SPECIFIC COMMENT - Spur gear adjustable on both sides (left/right) - General overhaul 2012, since the reserve gearbox - Incl. new on-board disc and multi-wedge shaft (overhaul 2011) TECHNICAL SPECIFICATIONS Manufacturer: ROHR Bagger GmbH Type: HDH 236 Year of manufacturing: 2001 Drive Power: 187.5 kW Weight: 2,500 kg SPECIFIC COMMENT: - Spur gear adjustable on both sides (left/right). - General overhaul 2012, sinve then reserve - Incl. new flanged pulley and splined shaft (overhaul 2011)
Didar Part Number 0697210001 NSN 12-334-8788 Original Part Number 0020984220 In-Pipe Water Pressure 3 – 4.5 bar Out of Pipe Air Pressure 4.5 – 7 bar In-Pipe Water Temperature 90 °C Outside Pipe Air Temperature 200 °C Amount of Water in the Pipe 10 Lt. Amount of Air Outside the Pipe 44 Lt.
Pressure transmitter for measuring gases, vapors and liquids ROSEMOUNT 2088
; Power [PS]: 299; Gross weight [kg]: 2782; Engine: 1506A-E88TAG3; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 528
Offer 22187 Roller conveyor height-adjustable Specifications: - Height-adjustable roller conveyor with spring support and locking mechanism - With clamping lever - Roller conveyor length approx. 3000 mm -Min. Roller conveyor height approx. 600 mm - Max. roller conveyor height approx. 1100 mm - Roll width outside approx. 280 mm - Roll length 2 x 125 mm each - Roll diameter approx. to max. 100 mm - max. possible number of rolls 10 pcs - 7 pairs of rollers are built-in - Total width of the roller conveyor approx. 500 mm - Total length approx. 3200 mm - Weight approx. 250 kg
Didar Part Number 0688910002 NSN 12-F12-5835 Original Part Number 0010981320 In-Pipe Water Pressure 4 – 6 bar Out of Pipe Air Pressure 4 – 7 bar In-Pipe Water Temperature 90 °C Outside Pipe Air Temperature1 80 °C Amount of Water in the Pipe 8 Lt. Amount of Air Outside the Pipe 28 Lt.
Paper drilling machine Nagel Citoborma 280 AB
GALLUS EM 280 – 8-color Year of Manufacture: 2003 ________________________________________ Product Description: Webwidth: 280mm 8 flexo printing units, set for quick unit change 8 UV curing Ist with water cooled chill roller 8 Pneumatic Doctor Blades Unwinding, splice table, webguide, Rewinder Infeed unit Spindle 3" Diecut station for 2 diecuts with 1 diecut unit, 2nd position empty Drive Unit Standard Label Counter Mech Matrix Removal Unit Spindle 3" Output section ( pull station ) Rewinding unit Pneum Winding Spindle 3" tension roller Web break and 1 matrix break detector Razor knifes Automatic register control ( incl diecut )
Didar Part Number 0688910002 NSN 12-F12-5835 Original Part Number 0010981320 In-Pipe Water Pressure 4 – 6 bar Out of Pipe Air Pressure 4 – 7 bar In-Pipe Water Temperature 90 °C Outside Pipe Air Temperature1 80 °C Amount of D153928 Water in the Pipe 8 Lt. Amount of Air Outside the Pipe 28 Lt.
Overview of the assembly: - Release agent spray unit top & bottom - Joining milling unit 2 x 4 kW - Glued part with workpiece preheating, 2 rolls, pressure zone C and QA34 application unit for PU with quick clamping system - autom. Adjustment pressure zone - Preparation for Lasertec activation unit - Hl84 cross-cut unit 0.8 KW - pneum. Adjustment pre-milling unit - Pre-milling unit Bf10 1.5 kW - Mould milling unit Fk11 Manual - Autom. Adjustment of chamfer to radius milling machines - Rolling side probe FK - Pneumatic adjustment FA11 for lateral displacement from the working area - Multi-drawing blade MN 21 autom. for a maximum of 5 different profiles. - Finishing unit (glue joint drawing blade and swabbing ridge) - Detergent spray unit top & bottom - powerControl PC22 Workpiece and edge parameters: - Workpiece width without edge min: - For workpiece thickness ...
RAANTEC DELTA 250 UV – Converting Year of Manufacture: 2003 ________________________________________ Product Description: Web width: max. 10 inch – 254mm 1x die-cutting unit 1 x inking unit UV Flexo 1-colour with corona and dust removal 1 set of impression cylinders Unwinding 850mm Winding on large roll and small roll possible Ran all the time only in single-shift operation. Machine Specifications and Equipment: ________________________________________ Accessories Included: Manuals Keys etc. ________________________________________ Technical and Optical Condition: • Technical: 8/10 (checked and in excellent running condition) • Optical: 8/10 (cleaned and ready for immediate end-user deployment) ________________________________________
Flail mulcher for three-point attachment (rear or front) Cat. II, PTO drive 540 rpm, gearbox with freewheel, hydraulic side displacement approx. 350 mm, working width 240 cm, 34 hammer mallets. Further flail mulchers, also laying mowers and other mowing technology in stock - see example photos! Info and offers on request. No sending of package deals or lists. Please name and phone no. for queries. Please let us advise you in advance by phone. Appointment required for viewing!
Key data: 370 mm, 650 mm, 3500 1/min
Machine Details Stock-No. 1105-04067 Type of machine CNC Lathe Make DAEWOO Type PUMA 250 B Year of manufacture 1998 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Corea Delivery time to be agreed Freight basis ex Site Technical details turning diameter 370 mm turning length 648 mm control Fanuc 18 t bar diameter 77 mm swing dia. 570 mm swing diameter over cross slide guide 255 mm max. turning diameter 255 mm drive capacity - spindle motor 18.5/22 kW turning speeds 3500 rpm Turret (X-Stations) 10 pos. JAPAN rapid traverse X-axis 24 m/min total power requirement 32 kW weight of the machine approx. 6 t dimensions of the machine approx. 3.43 X 1.85 X 2 m Additional information GOOD MACHINE WITH CNC FANUC 21 IT 3 JAW CHUCK DIA 250 MM SCHIP CONVoYEUR TOOL SETTER COOLANT INTERLOKED GUARDS
The electricity and gas-powered plant enables surface treatment of plastic films by flames. Field of application: Z.B. reverse films in the solar industry COMPONENTS • PSA Reversible Unwinding and Reversible Winder 2200/12 PSA W/ARW 2200/12 – Fyling Splice • Hill/ Jungwirth burner unit for gas/air mixture • Suction • Erhardt+ Leimer web edge control • OCS camera system for error detection • Semket labelling system for marking defects • GWK temperature control units for roller cooling SKL SP HC300 330KW
We offer a refurbished Peri Trio 270 formwork 198.28m² complete with accessories as follows. Frame cleaned, corrosion sealed with zinc phosphate coating. New original Peri Finply formlining. Accessories new, or Peri rental storage quality. New value approx. 145766,50€ Special net price 64706,00€ approx. 56% discount Pcs. Description 16 Element TR 270 x 240 new frames, new formlining 8 Element TR 270 x 120 new formlining 8 Element TR 270 x 90 new formlining 4 Element TR 270 x 72 top used formlining 4 multi-purpose elements TRM 270 x 72 new formlining 10 Element TR 270 x 60 new formlining 8 Element TR 270 x 30 new formlining 2 stripping elements TR 270x 24 new formwork lining 6 Corner TE 270-2 new formlining Accessories TRIO 130 Richtschloss BFD, verz. 30 TAR 85 compensating bolts 16 Scaffolding bracket TRG 80 2 Moving hooks MAXIMO 1.5 t new 1 new MX trans ...
Belt round knitter Kemper SBR-2500 Kemper belt round knitter with 2500mm long belts, with flour spreader.Speed adjustable via pot, machine can be moved on rollers, height adjustable. The machine is visually and technically in good condition, can be visited and tested in the warehouse in Bielefeld. We will be happy to send you further pictures and information on request.
XG-25B industrial furnace is designed to heat a charge placed in an induction coil by means of high-frequency current. In this process, the AC current flowing through the primary coil generates an alternating magnetic field around the charge. This field in turn induces electromagnetic forces in the secondary circuit, resulting in the heating of the charge. This solution makes the XG-25B2 induction furnace much more efficient and economical than other furnaces available on the market. The main power and control components are IGBT and MOSFET components, which enable the unit to operate strictly within the required technical parameters. The offer also includes a water tank, water pump, table and foot switch controller. The electric induction furnace weighs just 26 kg. Technical specifications of the XG-25B furnace - input voltage: 380 V ± 10%; 50/60 Hz - input power: 5-25 kVA - outp ...
used
Grain cleaning Schmidt Seeger TAS 206 Capacity 200 t/h Wheat, spare sieves etc.
Semitrailer tractor, manufacturer Renault Trucks, YOC 2005, Hbz. Premium, zul. total mass 18000 kg, Displacement in cm³ 10837, Diesel, 522'tkm, IR 2006
; Power [PS]: 239; Gross weight [kg]: 2191; Engine: Cummins QSB7-G5; Accessories: Tanker, Battery, Control Panel, Stahldach, Incl. Coolant Heater and Battery Charger; Water Tank Volume [l]: 400
The vertical shelving system is a well-thought-out storage solution for the upright storage of long goods such as roof battens, strips, installation pipes or beams. It was specially developed for commercial as well as private use and offers a particularly space-saving alternative to classic horizontal storage. Thanks to the vertical storage, only a minimal footprint is required – ideal for confined storage areas or the self-service area in retail. The scope of delivery includes: 01x Vertical racking, new Shelf height: approx. 3,050 mm Shelf depth: approx. 1,000 mm Shelf length: approx. 2,360 mm Projection: approx. 500 mm Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with a ...
Jensen A 3.3-245 Z, three-point attachment for PTO drive 540 rpm, 2-knife chopping disc, 2-roller feeder for wood up to 16 cm (feed opening max. approx. 160 x 245 mm) with adjustable feed speed, control pre-stop reverse, own closed hydraulic system, rear lights according to StVZO, toolbox below the feeder funnel. Weight approx. 700 kg. Well-preserved machine with age-related wear and signs of use, paint defects, rust, operational. Markenfabrikat made in Germany" (Jensen - since 1884). More wood chippers - also motor machines in stock!
Jib Crane, Column-Mounted Crane, Column Jib Crane, Crane 250 kg, Used Machine Manufacturer: Abus Load Capacity: 250 kg Column Height: 2900 mm Reach: 2600 mm Hoist: Demag, Chain Hoist Type: DKUN 2-250 K V2 Load Capacity: 250 kg Lifting Height: 2600 mm IP Rating: IP 55
Industrial cutter Seydelmann K 206 Ultra, 200 litre bowl made of stainless steel, largely solid stainless steel, operation via cross lever switch, separate digital display, main cover and product ejector hydraulic, transparent noise protection cover made of special plastic, separate stainless control cabinet with built-in main switch, central lubrication point for knife shaft, balanced, exchangeable knife head, 2 knife speeds, 2 mixing gears forward, 2 separately switchable Bowl speeds, DGA control, temperature sensor, 6-knife head, 400 volts, 50 Hz, 200 amps
Cutter Kilia 200 liter Express, surface, bowl lid and bowl stainless steel, noise protection lid, loading, ejector, knife shaft brake, knife shaft speed 2-touring
Laska Mixer Type ME 250 Vacuum Z Arm Mixer Kneader Filling quantity approx. 180 KG
Laska Mixer ME 250 VAC Capacity 180 Kg Mixing System Z Arm Kneader Mixer
Key data: 160 KW, 200 kVA, 400 V
MODEL: EQ-VP200160 GENERATOR ENGINE: Volvo Penta TAD732GE FREQUENCY (HZ): 50 VOLTAGE(V): 400V/230V GENERATOR POWER: 200(kVA) / 160(kW) CYLINDERS: 6 STARTING: ELECTRIC CONTROL SYSTEM: SELF-CONTROL FUEL TYPE: DIESEL COOLING: WATER-COOLED WEIGHT: 1700kg DIMENSIONS L/W/HEIGHT (MM): 252010601530 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) / ComAp Alternator: Leroy-Somer / Stamford Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight pr ...
Key data: 220 KW, 275 kVA, 400 V
MODEL: EQ-VP275220 GENERATOR ENGINE: Volvo Penta TAD734GE FREQUENCY (HZ): 50 VOLTAGE(V): 400V/230V GENERATOR POWER: 275(kVA) / 220(kW) CYLINDERS: 6 FUEL TYPE: DIESEL COOLING: WATER-COOLED WEIGHT: 1950kg DIMENSIONS L/W/HEIGHT (MM): 260011001530 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) Alternator: Leroy-Somer Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inquiry with your details and full address ...
Cutter K+G Wetter CutMix 200 STL with load for 200 liter standard car and ejector, 200 liter cutter, surface, bowl lid with storage wall and bowl stainless steel, noise protection cover, knife shaft brake, main switch, membrane keyboard, infinitely adjustable knife shaft speed (40-4,400 rpm), infinitely adjustable bowl speeds (5-18 rpm), infinitely adjustable mixing gear backwards (40-500 rpm), digital display knife shaft temperature bowl, K+G weather CM 200 STL
Key data: 280 KW, 350 kVA, 400 V
MODEL: EQ-VP350290 GENERATOR ENGINE: Volvo Penta TAD1341GE FREQUENCY (HZ): 50 VOLTAGE(V): 400V/230V GENERATOR POWER: 350(kVA) / 280(kW) CYLINDERS: 6 FUEL TYPE: DIESEL COOLING: WATER-COOLED WEIGHT: 2550kg DIMENSIONS L/W/HEIGHT (MM): 260011001530 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) Alternator: Leroy-Somer Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inquiry with your details and full address ...
CNC lathe WIA L 200 SY Manufacturer: Hyundai YEAR: 2014 Control Fanuc ... Fanuc 31i Turning diameter ... 550mm Rotation length... 530mm Axis Y ... +-40mm Counter spindle Spindle bore... 70mm Tool turret... 12 L x W x H ... 3045 x 1707 x 2021mm Machine weight ... 4600kg The machine is in good condition, possible to test under power.
Manufacturer/ Make: SKODA Typ/ Type: W200 Year of construction/ year: 1987 X-way: 11500 mm Y-way/ Y-way: 4500 mm Spindle diameter: 200 mm
Operating Weight: 23,000 kg Engine: Cummins QSB7 (EURO V compliant) Power Output: 124 kW (166 HP) at 2050 rpm Hydraulic Pump: PNM high-performance pump Control Valves: Parker hydraulic control valves Swing Engine: Sunjin (Korea) Traveling Motor: Doosan Hydraulic System Pressure: 34 MPa Bucket Capacity: 1.1 m³ Swing Speed: 0–13 rpm Traveling Speed: 3.8–4.2 km/h Gradeability: 30° Maximum Digging Radius: 9.936 mm Maximum Digging Depth: 6,550 mm Maximum Digging Height: 9,680 mm Maximum Dumping Height: 6,730 mm Overall Length: 9,565 mm Overall Width: 2,990 mm Overall Height: 3,000 mm Track Width: 600 mm Track Height: 950 mm
- 2 saeulen-execution - Working area Durchm. u. Square 420 mm - Material feed length 3 - 600 mm single feed , - Cutting speed infinitely variable 12-100 m/min. - Heegeband dimensions 6050 X 40 X 1.3 mm - Drive 9.5 kW - Dimensions L/BH 2050 x 2725 x 2080/ 2530 mm - Weight: 4000 kg - Machine dimensions: L x W 1500 x1900 mm - Weight: approx. 1700 kg
Takeuchi TB 230 Year of construction 2017 Operating hours 980 Powertilt with load hook and hydraulic Lehnhoff HS03 quick coupler 1 digging bucket 300 mm
Here we offer for sale a brand new Reinhardt electrically heated chamber dryer in its original packaging. Reinhardt Chamber Dryer Vortex 2600 Technical description Vortex 2600 Temperature range: 50 - 250°C Temperature deviation: approx. ± 5K in the inertia state, idle and recirculation mode at 250°C Furnace control: PLC control, type "RCC", with touch panel 5.7" Volume approx.: 2,600 litres Interior dimensions: Width: 1,250 mm Height: 1,850 mm Depth: 1,150 mm External dimensions approx.: Case width: 2,000 mm Total width: 2,350 mm Case height: 2,170 mm Total height: 2,700 mm Total depth: 1,570 mm Track dimensions: Track width 990 mm Track width 60 mm Insulation thickness: Side walls, ceiling and doors are insulated with 150 mm insulation material, the floor with 50 mm insulation material. Total connected load: 23 kW of which for: Heating: 22 ...
An original control cabinet that was dismantled by PAAL Konti 275 C, built in 1994. It is based on SIEMENS S5 controller. It is also suitable for other models such as: Konti 200, 275, 325,425, depending on model and drive power. A complete control cabinet, functional We have several channel balers and balers in our warehouse and we cordially invite you to contact us!
; Gross weight [kg]: 14470; Engine: Caterpillar 3516B; Accessories: Control Panel, Caterpillar 3516B Genset from the official CAT Rebuild Program., Engine is completely rebuild by CAT or even unused/surplus., All other components are usually new., Comes with the standard CAT factory warranty.
IRON SA 25000 ENC sheet metal decoiler was built in 2025 in Italy by Iron Srl. The machine, designed to automate production, has been equipped with state-of-the-art technology, which ensures the highest precision in decoiling coil strip. These include a worm gear reducer with overload clutch, an epicyclical reducer and four self-centring clamps with hydraulic expansion. The machine is controlled by a inverter and feedback encoder, which in turn enables controlled electrical braking. All this is complemented by a sturdy construction made of top-quality steel. The offered IRON 25 t sheet metal uncoiler is brand new and unused. The price also includes a CST coil lift table for easy loading of the coil directly onto the machine arm. The IRON SA 25000 ENC self-centring decoiler is part of the RNM coil strip handling line. The system is customisable and can be equipped with devices such ...
An original control cabinet dismantled by PAAL Konti 200B, built in 1987. It is based on analog relays. It is also suitable for the other models such as: Konti 125, 200, 275 , depending on model and drive power. A complete control cabinet, functional
Bread packaging machine Hartmann Automat GBK 220 -Sliced bread packaging machine Hartmann -Model Automat GBK 220 -Weight 1600 kg -Year of construction 1999
COLOMBO AGOSTINO 225.400 coil stamping and punching line was built in 2006 in Italy by Colombo Agostino S.p.A. Its extensive machining capabilities and high reliability make it an excellent choice for series production of components, such as washing machine parts or automotive parts. The production process is fully automatic, thanks to a high-speed feeding system. It unwinds the sheet metal from the coil towards the work station, which features precision tools operating at a maximum force of 400 tonnes. The monolithic design of the machine further ensures high durability and stress-free operation. The COLOMBO AGOSTINO coil-fed punching machine weighs 75000 kg. The coil punching line is complete and consists of the following machines: – 400 t eccentric press: COLOMBO AGOSTINO – sheet metal decoiler: DEF CT 3/128 – coil lift table – sheet metal straightener RA 3000/4-8/120 A ...
maximum number of results exceeded
please refine your search
