138,283 used machines on RESALE, but how to find them? Machine Search
Unclinking machine, little used Notching machine , lessly used Type: VA 200/ 4 Built / yom: 1995 Manufacturer / make: KEMPFLE Table size: 1000 x 800 mm Power:/ capacity: 4 mm / for steel / steel 400 Nm/mm 3 mm for stainless steel 600Nm/mm Length of cutter blades: 205 mm Number of Strokes/ strokes: 60 per minute Cutting head/ cutter head: 30...135° (stepless) Weight / weight: 1.15 tons Connection value/ connected power: 4 kW
- Valve bridge MWM 12129392 - Suitable for several motors - Please note! Price per piece! - References -> 12136467 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and int ...
- Oil level control MWM 12480505 - Suitable for several motors - Please note! Price per piece! The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new technolo ...
Ultra-Turrax Manufacturer: IKA N°: 0185 Power: max. 15 kW 380 volts max. 1476 rpm good condition LWH: 2750 x 500 x 550 mm
Excenter screw pump Manufacturer: Resch Type: 2RBL 150 Built: 1998 Speed: 309 rpm Power: 0.37 kW at 1360 rpm very good condition LWH: 850 x200 x 170 mm Product inlet DM 25 (milk tube fitting) Weight: approx. 15 kg 3 in stock
- Charge air cooler MWM - Suitable for several motors - Please note! Price per piece! It is a scrap part. - References -> 12301219 - 12141936 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By ...
- Hatch cover MWM 12302310 - Suitable for several motors - Please note! Price per piece! - References -> 12302310 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and inte ...
Extruding system with cross-spray head for sheathing of small profiles/filaments consisting of: 30 mm extruder with tool, water bath, extractor and winder Optional with memory for role change
Machine type MIG/MAG inverter welding system without BiPower Make Merkle Type MobiMIG 280 K Plant No. 123.035 Connection voltage 3 x 400 volts Adjustment range 25 - 280 amperes Switch-on time 35% ED at 280 amperes 60% ED at 240 amperes Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Version of portable assembly line Wire feed gearbox 4-wheel transmission DV 26 Fuse 16 Ampere Dimensions L x W x H 470 x 255 x 545 mm Special accessories ColdMIG welding process, e-welding MIG soldering, filler wire welding Weight 27 kg Age 2 years Condition workshop-tested, very good, incl. UVV workshop test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SBT 307 G, 3 mtr. Long 1 piece ground cable 4 mtr. long, 35 sqmm 1 piece pressure reducer Argon w ...
Diosna SPV 240 AF/T - Spiralkneter mit 2 kessel auf frage moglich mehr kessel - Bottichwandabstreifer mit Temperaturfühler - sterung mit program speichren - sehr leiser Betrieb - Maschine wie neu
Machine type Pulse-Arc-Inverter-Welding system Make MERKLE Type HighPULSE 284 K Connection voltage 3 x 400 volts Adjustment range 25 - 280 amperes Switch-on time 35% ED at 280 amperes 100% ED at 200 amperes Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Version of portable assembly line Wire feed 4-wheel drive DV 26 Fuse 16 Ampere Dimensions L x W x H 600 x 300 x 565 mm Special accessories Connection for water cooling Weight 33 kg Age 6 months Condition workshop-tested, very good, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SBT 307, 3 mtr. Long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll of welding wire 0.8 mm, D-300, 5 kg 1 pair of welder gloves with cuff 1 piece spare p ...
6-wheel mower with four-wheel drive, Farymann 2 cylinder diesel engine, hydrostatic drive, power steering. Hydraulic inclination adjustment, track width adjustment, spread arm with 180 cm double knife mower beam. Tyres 6x 4.50-14 AS.
Perfect, used short time. Lead Screw and Feed Shaft Lathe 3-axis position indicator Workpiece length (max.) 1.928 mm Turning diameter over bed 560 mm Turning-Ø over support 355 mm Turning diameter over gap bridge 785 mm Gap bridge length 170 mm Bed width 350 mm Travel X-axis 316 mm Travel Z1-axis 130 mm Swing range of top slide ± 52° Spindle speeds L 25-200 / H 200-1600 1/min Spindle bore 80 mm Spindle mount Camlock D1-8 Spindle taper MT 7 Feed X-axis 0,02 - 0,573 mm/R Feed Z-axis 0,059 - 1,646 mm/R Tapping, metric (47) 0,2 - 14 mm Tapping, diametric (50) 4-112 DP Tapping, module (39) 0,1 - 7 mm Tapping, whithworth (60) 2-112 TPI Tailstock quill diameter 75 mm Tailstock taper MT 5 Tailstock quill stroke 180 mm Tailstock traverse adjustment ± 12 mm Motor rating main drive 7,5 kW Overall dimensions 3,34x1,15x1,46 m Weight 2.720 kg 3-jaw chuck Ø 315 mm 4- ...
Qty. 1 Second-hand aluminium strip production plant Entry Material: Aluminium Scrap – HD666, AA5050, 2.5-3.0% Mg Final product: Aluminium strip (can stock) Width: 220 mm Thickness: 0.15 – 1.0 mm Mfc.: De Winter, Thermcon, Fata Hunter, Fröhling, Nederman, Burghardt & Schmidt, Siemens Built: 1984, 1999, 2000, 2002, 2014, 2015 Scope of supply: Melting Furnace Tilting Casting Furnace Block Caster 5 Stand Hot Rolling Mill 6 Stand Cold Rolling Mill Hot Gas Filter Slitter Welding Machine Treatment Furnace Quenching Unit Shear
- Cover MWM 12302480 - Suitable for several motors - Please note! Price per piece! - References -> 12302480 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrati ...
Storage number: 3552 CNC ROTARY TABLE Manufacturer: HOFMANN, Type: RW-NC 220 Machines NR.: 02368 30JO2, built: 2009 Specifications: Table size 220 mm Center Height 220 Partial 0.001 Degree Control SIemens 840D Hori/Vertical Accessories: Riding stock - manual Length: 600 mm, Height: 800 mm, Width: 400 mm, Weight: 200 kg
Complete precision ball screw drive with bearings, stroke 308mm, 25x5/25, Rexroth, new Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Complete precision ball screw with pillow block and floating bearing, thread diameter 25mm x 5mm ball screw Plummer block Rexroth: R159161720 Plummer block Rexroth: R159111720 Ball screw nut with part holder: R150321085 Total 496 x 110 x 72mm Maximum stroke: 308mm Function guarantee! For second hand parts, we can not accept any conventional guarantee and warranty. But we give you a functional guarantee. If the device does not work within 3 months after purchase you can return the goods and we wi ...
DATA ON THE MACHINE Machine type: Roller conveyor / roller conveyor Manufacturer: Transnorm Model: 2900 Built: 2007 Condition: very good (used) Price 950 Euro net plus VAT Location Warstein , Germany Reference M-TRA-0221-1 Description We offer you a used roller conveyor from the manufacturer Transnorm, excluding feet. For more data, see typeplate. Our offer is aimed at professionals who are covered in accordance with the Trade Code in accordance with Section 14 GewO. The offer is subject to change, intermediate sale reserved. Please provide your full contact details to receive a quote with our terms and conditions and payment terms. Errors in the descriptions and offers are reserved!
20167 ZF BW 251 - 4.792:1 A 0.346 KW/RPM Brand Gearbox ZF Model Gearbox BW 251A Ratio 4.792:1 A Power 0.346 KW/RPM RPM 1800 RPM Serial Number 3815 General condition Taken out running condition With Flexible Coupling With SAE Housing With Controls Mechanical With Mounting Brackets SAE 0 Weight (kg) 880 Dimensions (cm) 100 x 105 x110
Machine type MIG/MAG inverter welding system with bi-power setup Make Merkle Type MobiMIG 280 K - BiPower Connection voltage 230/400 volts Adjustment range 25 - 280 amperes Switch-on time 35% ED at 280 amperes 60% ED at 240 amperes Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Version of portable assembly line Wire feed gearbox 4-wheel transmission DV 26 Fuse 16 Ampere Dimensions L x W x H 470 x 255 x 545 mm Special accessories ColdMIG welding process, e-welding MIG soldering, filler wire welding Bi-Power Setup Weight 27 kg Age 12 months Condition workshop-tested, as new, incl. UVV workshop test protocol Scope of delivery Welding system with the following accessories 1 piece welding torch SBT 307 G, 3 mtr. Long 1 piece ground cable 4 mtr. long, 35 sqmm 1 piece pressure reduc ...
Slideways for die-casting machine, 2580 x 125 x 25mm, Idra, Oleopress, new The new slideways from Olepress / OP die casting come from a spare parts stock of an aluminium die casting company. They fit die casting machines like Olepress, Idra and others. See dimensions Slideways, slide rails for aluminium die casting machines, case hardened steel. The bronze bars of the die casting tables slide on these slide rails. 2580 x 125 x 25mm, bores 4 x D20/14 x 2540 x 90 If you have a UID number, we will gladly issue an invoice without VAT. You are welcome to inspect and check the goods at our premises in Austria, 3130 Herzogenburg.
Machine type MIG/MAG inverter welding system without BiPower Make Merkle Type MobiMIG 280 K Connection voltage 3 x 400 volts Adjustment range 25 - 280 amperes Switch-on time 35% ED at 280 amperes 60% ED at 240 amperes Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Version of portable assembly line Wire feed gearbox 4-wheel transmission DV 26 Fuse 16 Ampere Dimensions L x W x H 470 x 255 x 545 mm Special accessories ColdMIG welding process, e-welding MIG soldering, filler wire welding Weight 27 kg Age 12 months Condition workshop-tested, very good, incl. UVV workshop test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SBT 307 G, 3 mtr. Long 1 piece ground cable 4 mtr. long, 35 sqmm 1 piece pressure reducer Argon with 2 pressure gau ...
Kersten K 2000, 6.6 kw/9 hp Honda four-stroke gasoline engine, electric and manual start device, stepless hydrostatic drive forward/backward 0-4 km/h, differential, wheels 4.00-8", hydraulic plug-in couplings for device drive. Front sweeper F 1000, working width approx. 1000 mm, manually swivelled left and right.
Powder incineration furnace 2,000 x 1,900 x 2,000 mm 1 inner dimension length 2,000 mm 2 Inner dimension width 1,900 mm 3 Inner dimension height 2,000 mm 4 Substructure 1 set steel profile 5 walls 1 set on both sides galvanized sheets 1mm, outside RAL 6 insulation walls, ceiling 1 set of rock wool 150mm 75Kg/m2 7 ground furnace gets 2 entry rails for horde wagons 8 Temperature 220°C 9 fans 1 pc. 5,700 m3/hr 10 Electric motors 1 pc. 2.2 kW , 1450 R/m, 3 F, 50 Hz 11 Thermal power 33 kW = 28,380 kcal/hr 12 sash doors on one side 2 pcs insulated with rock wool 100mm 75Kg/m2 Heating Indirectly via Thermoblock 13 Thermoblock 1 set stainless steel INOX with heat-resistant fans and heat-resistant bearings, Thermoblock has overheat protection 14 Burner 1 pc. furnace is operated with gas burner 15 Exhaust air 1 pc. device for exhaust air pipe, manual flap guide
The press brake HAMMERLE BM 200-3100 press brake was built in 1996. The folding machine was serviced regularly. Technical parameters of the press: - control: INFINITRON - number of NC axes: 11 - pressure: 200 tons - bending length: 3100 mm - working stroke: 400 mm - distance between the body walls: 3240 mm - maximum distance between the table and the bumper: 965 mm - voltage: 3 x 400 Volt - control voltage: 24 V = - total power: 28 kW - deflection arrow compensation - total machine width: 4400 mm - total height of the press: 3400 mm - weight of the press: 16 600 kg
- Air cleaner fastening MWM 12300402 - Suitable for several motors - Please note! Price per piece! The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new tech ...
Technical data: - Cutting range at 90° around 260 mm - flat 450 x 240 mm - Cutting range at 45° around 230 mm - flat 240 x 200 mm - Machine is mounted on original turnstile - Saw band dimension 3660 x 25 x 0.9 mm - Cutting speeds 20 / 35 / 50 / 70 m/min - Hydr. lifting + lowering the saw frame - Cutting pressure infinitely adjustable 0 - 10 m/min - Total drive power 400 V / 0.8 kW - Coolant device - Space requirement approx. W 2100 x H 1200 x D 1000 mm - Weight approx. 500 kg
- Raw water line MWM 12141963 - Suitable for several motors - Please note! Price per piece! The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new technologie ...
Replacement columns for die-casting machine OL1500, D250x12, Oleopress, refurbished Special price! In addition, we also have a new spar nut and 2 adjusting nuts in separate adverts. If you have a VAT number, we will be happy to issue you with an invoice without VAT. Second hand! The part was bought from a spare parts store of a company, it was overhouled by a specialist company, is in a very good condition and fully functional. Attention: We have not cleaned the column yet, as the fat layer is optimal for storage. Material: Chrome-plated alloy steel Manufacturer Olepress / O.P. DIE Casting Thread 250 x 12mm Thread fixed end 300mm lg Thread adjustable end 1160mm lg Weight approx. 2300 kg Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D ...
- Overflow MWM 12325735 - Suitable for several motors - Please note! Price per piece! The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new technologies and ...
Replacement columns for die-casting machine OL1600, D250x14, Idra, new -50% Special price! As good as new in original packaging! The part was bought from a spare parts store of a company and has never been in use, is completely as new and in the original packaging. Material: Chrome-plated alloy steel Manufacturer Olepress / O.P. DIE Casting Thread 250 x 14 mm, L 5908 mm, Thread fixed end 290mm lg Thread adjustable end ca. 1160mm lg Weight approx. 2300 kg Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300
- Guide tube MWM 12135199 - Suitable for several motors - Please note! Price per piece! The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new technologies an ...
- Cooling water line MWM 12300542 - Suitable for several motors - Please note! Price per piece! The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new technol ...
Replacement columns for aluminium die-casting machine OL2000, D285x10, Oleopress, new -50% Special price! In addition, we also have a spar nut and 2 adjusting nuts in separate adverts. As good as new in original packaging! The part was bought from a spare parts store of a company and has never been in use, is completely new and in ist original packaging. Material: Chrome-plated alloy steel Manufacturer Olepress / O.P. DIE Casting Thread 285 x 10mm, L 6830mm Weight approx. 3400 kg Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300
Stock# U2428-1 Used stainless steel twin screw cooling conveyer by AMF (Apener Maschinenbau und Forderanlagen Gustav Bruns GmbH & Co KG) model HDS 250 x 3500. Machine has two stainless steel screws with total length 3500 mm and working length about 3000 mm. Screws are driven by el motor 1.1 kW and reducer. Working rotation of screws up to 2.7 rpm. Each screw has a internal channel and is connected to cooling medium. Working pressure inside the shafts - up to 1.5 bar, temperature range from -10C up to +30C, volume - 2 x 18 l. Screws are working in jacketed tank. Width of tank 570 mm x length 3500 mm. Tank has volume about 430 l and is working on atmospheric pressure. Temperature range from -10 up to 0C. Tank has stainless steel jacket at bottom and side walls. Volume of jacket 40 l, working pressure up to 1.5 bar, working temperature range - from -10C up to +30C. Top of the tank is eq ...
Qty. 1 Second-hand crank hot forging press – dismantled & in storage Mfc.: Hyunjin Industry, Korea Built: 2008 Status: dismantled and in storage Force: 2500 T Total weight of the machinery: approx. 250 T
Machine type Electrode inverter welding rectiveror with bi-power setup Make Merkle Type MobiARC 284 cel Plant No. 106.539 Connection voltage 230/400 volts Adjustment range 20 - 280 amperes Switch-on time 35% ED at 280 amperes 60% ED at 240 amperes 100% ED at 210 amperes Current adjustment infinitely variable max. weldable material thickness 7 mm Cooling inverter by built-in fan Version of portable assembly line Special accessories Bi-Power-Device Fuse 16 Ampere Dimensions L x W x H 485 x 200 x 435 mm Weight 17 kg Age 5 years Condition workshop-tested, good, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece electrode cable 1 piece ground cable 1 piece hand shield 1 piece of lens 90 x 110 mm white 1 piece of protective glass 90 x 110 mm 10 DIN 1 pair of welder gloves with ...
Rated power at 50%ED: 20kVA Short-circuit current: 15kA Electrode force: 420daN Extension: 130-500mm --- Controls: RS 17 (5-times, 2-program) --- incl. additional options: - Foot switch "powerless set-up" - Tube arm Mk2, straight - Main switch - 3m connection cable with plug --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock
The laser WUXI CHEERON QY-LC1500-2540 FIBER was produced in 2020 by the brand Wuxi Cheeron Qingyuan Laser Technology Co. The machine is new, it was only included for a test run after the purchase. The machine uses an IPG Photonics (Germany) laser source. The 3-axis fiber optic laser cutter has a power of 1500 W and a large working area of 4000 x 2500 mm. The modern design of the laser guarantees many processing possibilities, thanks to the fact that it is equipped with two automatic sheet metal loading tables, a cutting chamber, a large LCD screen, and extensive equipment. Laser technical parameters: - two automatic feeding tables: 4000 x 2500 mm - cutting working surface: 4000 x 2500 mm - closed, illuminated cutting chamber, with strong gas extraction - HD cameras for viewing in the cutting chamber and external viewing of loading tables - a closed container with a control ...
Coarse grinder Palmia 255 Category Used meat processing machines Subcategory Mechanical Tratment of Meat Type Grinders / Mincers Height 1700 Width 860 mm Length 1500 mm Voltage Electrical: 400V 50Hz 3N Installed Power 12 kw Main material Stainlees Steel Time of realisation in stock Loader No Loader, possibility to buy a separate loader Throat Diameter 280 mm Grinder Type Feeding System Hooper Throat Material Stainless Steel Auger Material Cast Iron
-Prefab. wiring system MWM 12323818 & 12323819 - Suitable for several motors - Please note! Price per piece! -12323818 ; 1232-3818 ; 1232 3818 - Predecessors: 12479560 ; 1247-9560 ; 1247 9560 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of s ...
used
Technical data: - Load capacity E. chain hoist 250 kg - Lifting speed approx. m/min - Operation of the chain hoist via hand remote scanner - Man. Process hoist / transverse path + longitudinal path - Track gauge variable to approx. 3500 mm - Hook height approx. 2800 mm - Crane track length approx. 5000 mm - Height approx. 3900 mm - UK crane carrier approx. 3000 mm - 4 pieces of steel supports made of recheck tube 150 x 100 mm H 3900 mm - 2 longitudinal suspension carriers approx. 5000 mm - Cross suspension carriers approx. 3500 mm - Weight of the plant approx. 1000 kg
The scope of delivery includes: 01x Depth bar frame, used Material colour: sendzimir galvanized Total length: approx. 1,250 mm for shelf depth: 1,200 mm Clear span: approx. 1,100 mm Truss support: approx. 50 mm Support angle: L: approx. 80 x 80 mm Total width: approx. 860 mm Inner width: approx. 855 mm Material thickness: approx. 3 mm Side frame: Length: approx. 1.2450 - 1.070 mm Front Tapered Width: approx. 200 mm Height: approx. 195 mm End stop: Width: approx. 200 mm Height approx. 195 mm Your contact persons in our company: Mr. Andre Evering Mr: Mario Klöver Mr: Falk German General information about the product: It is a used item, there may be scratches, dents and traces of use. This item is available for pickup only. A further desired transport or a dispatch of this article is associated with additional costs, which are separately depending o ...
Technical data: - Load capacity E. chain hoist 250 kg - Lifting speed approx. m/min - Operation of the chain hoist via hand remote scanner - Man. Process hoist / transverse path + longitudinal path - Track gauge variable to approx. 3000 mm - Hook height approx. 2200 mm - Crane track length approx. 4000 mm - Height approx. 3500 mm - UK crane carrier approx. 2700 mm - UK - longitudinal rail approx. 3000 mm - 4 pieces of steel supports made of recheck tube 150 x 100 mm H 3500 mm - 2 longitudinal suspension carriers approx. 4250 mm - Cross suspension carriers approx. 3000 mm - Weight of the plant approx. 1000 kg
250 ton x 3000mm 3100mm ben length 3200mm between frames MASSIVE tooling package Bend aid and voice control!
maximum number of results exceeded
please refine your search
