jumbo 2 used for sale

Rotary vane vacuum pump Oelumlaufgeschmiert warranty: 12 months Manufacturer: Becker type: U 4,250 SA/K Engine: DS 400V Suction power: 250 m ³/h Discharge pressure: 3 mbar (ABS.) Status: very good condition. Reconditioned Accessories: oil (petroleum) Delivery time: Please enquire Further details or technical assistance like via request; ready for operation

Rotary vane vacuum pump Status: Generalueberholt; As capacity: 12 months Yield time: from stock Manufacturer: Busch Type: R5 RA 255D Engine: 400V Equipment: Mineraloile Nominal suction digesters: 250m3/h Final pressure: 0.5 mbar (abs.) Zubehoer: User Manual; Oil filling (mineral oil); Vacuum suction filters delivery time: from stock (intermediate sale reserved) If you have any questions about vacuum technology, we are happy to provide you.

new ! all stainless steel speed : 27 rpm 2 mixing directions safety lid CE-approved power : 2,2 kW overall dimensions (l x w x h) : ± 1.400 x 1.000 x 1.600 mm

Diosna SP 240 A DL with 3 bowls -Machine after overhaul -New bearings, new wedge belts, new switches, new buttons, -2 Speed -2am for 30 minutes -3 bowls -For 240 kg dough

MWM TCG 2020 V12-Nr. MWM TCG 2020 V16

Was installed in a Husky injection moulding machine

The machine has been dismantled and has been in our warehouse since 2015, it is used and was in use in a turkey slaughterhouse with underbeam, conveyor belt and articulated rupee.

Double motor module SINAMICS, 2x3A, 6SLE120-2TE13-0AD0, Siemens, mint condition -40% Special price Attention: Original Siemens product, no replica from.. If you have a VAT number, we will gladly issue you an invoice without VAT. Top condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 250 hours of operation. Technical data: - Douple motor module, SINAMICS, 2x3A, 6SL3120-2TE13-0AD0, Siemens, - Input: DC 510-720V 7.2A - Output: 3AC 0-480V 3A/3A 0-550Hz - Control: DC 24V, Brake Output: DC 24V 2A/2A 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the seller, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liabil ...

Steel tank with inner coating, e.g. can be used as a fire-fighting water tank or rainwater tank with 2 x concrete consoles per tank Can be used above ground with consoles or (half) underground with anti-corrosion coating Volume: 290 m3 Dimensions: 4.50 m x 22.50 m On request: Fire brigade connections (according to German DIN standards)- ventilation, suction line, A-coupling, anti-vortex plate, etc. Inflow and overflow

An original control cabinet that was dismantled by PAAL Konti 425 B, built in 1991. It is based on SIEMENS S5 controller. It is also suitable for other models such as: Konti 200, 275, 325, 425, 500, 600, 700, depending on model and drive power. A complete control cabinet, functional We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

An original control cabinet that was dismantled by PAAL Konti 425 B, built in 1991. It is based on SIEMENS S5 controller. It is also suitable for other models such as: Konti 200, 275, 325, 425, 500, 600, 700, depending on model and drive power. A complete control cabinet, functional We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Control cabinet for PAAL accounts 200, 275, 325, 425, 500, 600, 700 after renovation An original control cabinet, the one from the PAAL Konti 425 B/K, built in 1992, with the cross binding. It is based on SIEMENS S5 controller. It is also suitable for the other models such as: Konti 200, 275, 325, 425, 500, 600, 700, depending on model and drive power, also for the variant with the cross binding. A complete control cabinet, functional, after renovation We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Dear Sir or Madam, we have now available used transformer stations Year of construction : 2001-2002 Power : 1600KVA Primary voltage : 20kV Secondary voltage: 690V, Switching group: DYN5 Switchgear: SF6 total weight per station is 12.5 tons Dimensions: Length = Width = Height = Immediately ready for use and available, nationwide cheap delivery. If you have any further questions, Mr. Schmidt Techn. Purchasing is there for you, available Monday to Saturday from 8 a.m. to 10 p.m. and in case of emergency 24 hours

Used lifting kneader DIOSNA, Type: D 200 / 2G -In bakery condition- - 2 speed levels - for 200kg dough or 125kg flour - Engine re-mounted - New V-belts - New timer - Stainless steel boiler - Plasticized kneading spiral nickel-plated and food-grade - Condition: Good, technically tested, cleaned, immediately ready for use Boiler volume: for 200 kg dough El. Connection: 380 V, 50 Hz, 7.1 A Inspection and test run are of course possible by arrangement.

Transformer station with prefabricated concrete building L = 3,20m W = 1,50m H = 1m + 1,45m 200 kVA Doors are available.

Level limiters for water-polluting liquids for sale. Afriso / Fafnir NB 220 QS for 220V AC 10 pieces available, all in original packaging.

Description: Type : Oil transformer Finish : Hermetic Make : SGB Year of manufacture : 2016 Condition : New Rated Power : 4200 KVA Medium voltage : 22KV +- 2X 2.5% Low voltage : 400 V Shifting group : Dyn 5 Frequency : 50 Hz Type of cooling : ONAN Gross vehicle weight : 9030 kg Weight of oil : 1940 kg DIALA S4 ZX-I Other sizes and voltages also available from 100 KVA to 3500 kva. All transformers are tested and in ready-to-use condition and immediately available from our warehouse in 59557 LIPPSTADT. Nationwide delivery. Available for further questions Mon to Sat. 8 a.m. to 10 p.m.

Offer up to 2 UTX Techlon 200 round slings (polyester) here. WLL: 20000kg EWL: 5m Unfortunately, they have been dragged over the hall floor a few times and are now quite dark, but they are technically very well preserved, have no cracks or cuts and the blue shield is completely present. Last test 01/2021, no more use after 07/2021

Machine crossing with platform (bridge) 4570-880-2600 RA1996 Technical data: Manufacturer: In-house production Type: machine crossing with pedestal Condition: very good (used) Total size: 4570-880-2600 mm (WxDxH incl. handrail) step dimensions: 240 x 800 x 35 mm step/tread height: 200 mm platform dimensions: 850 x 800 mm Platform height: 1400 mm bottom edge 1600 top edge Steps: 8 (7 steps + platform on each side) Weight: 390 kg Next TÜV: 02.2023 Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Dear Ladies and Gentlemen, We now have used transformer stations available Year of construction : 2004 Power : 1000KVA Primary voltage : 20kV Secondary voltage: 400V, Groupset: DYN5 Switchgear: SF6 Station Dimension : Length: 250 cm Width: 240 cm Height: 245 cm Weight: 11 ton At call Nationwide cheap delivery. If you have any further questions, please do not hesitate to contact Mr. Schmidt. Available Monday to Saturday from 8 a.m. to 8 p.m. CLOCK and in case of emergencies 24 hours

Base for press brake tool, bending tool, die, bottom knife, lower tool, prism tool, reversible prism, 1-piece die block for die bending machine, die tool, folding tool -Tool: for press brake, base for press brake tool -Dimensions: see drawing in the photos -Dimensions: 2500/70/H22 mm -Weight: 26.1 kg

Gear motor, electric motor, three-phase motor -Speed: 114/228 rpm -Power: 0.8/1 kW -Construction: B3 -Diameter shaft: Ø 24 mm -Protection class: -Number: 1x motors available -Price: per piece -Dimensions: 405/225/H210 mm -Weight: 22.3 kg

Interroll roller conveyor falling conveyor 1470-2155-490-420 RA1981 Brand: Interroll Roller width (RB): 420 mm Nominal/outer width (NB): 490 mm length: selectable between 1470 mm and 2155 mm Diameter rollers: 50 mm roller distance: 90 mm Roller conveyor drive: no drive Frame height: 115 mm Optionally available: Supports Side guide on one side and on both sides Not the right one for you? On our website industriebedarf-sonntag.de/en you will find more articles or simply contact us. Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 2015 condition: very good (used) Conveying length in mm: Bitte wählen Nominal / outside width in mm: 490 Roll width in mm: 420 Roll division in mm: 90 Driven: NO For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implem ...

Bending tool, die, lower knife, lower tool, prism tool -Tool for: press brake -Groove: W/D 9 x 12, 5 x 8, 17 x 20 mm -Length: 3 x 835 mm, 1 x 272 mm -Width/height: 60 mm -Drawing: with the pictures -Weight: 67.5 kg

Hydraulic power pack, hydraulic pump, hydraulic pump, universal power pack -Hydraulic unit: from Heycop 3UN/2000 automatic lathe -Motor: Siemens 1.5 kW/2855 rpm -Hydraulic tank: with level indicator -Pressure display: up to 60 bar -Dimensions: 300/500/H650 mm -Weight: 130 kg

Three-phase motor, electric motor -Power: 7.5 kW -Speed: 2910 rpm -Shaft: Ø 38 x 80 mm -Design: B3 -Protection rating: IP44 -Price: per piece -Quantity: 1 piece -Dimensions: 470/345/H260 mm -Weight: 75 kg

Bending tool, die, lower knife, lower tool, prism tool, reversible prism, 1-part die block for die bending machine -Tool: for press brake, 12 pieces -Prisms: 25 ° x 10 mm -Drawing: in the photos -Lengths: see parts list in the photos -Dimensions total: 30/79/2917 mm -Weight: 47 kg

Bending tool, die, upper blade, upper tool, straightening tool -Tool for: Press brake -Prisms: 90° x 75 mm -Dimensions: see drawing in the photos -Dimensions: 2500/270/H175 mm -Weight: 188 kg

MACC Metal Circular Saw NEW 250 Saw blade Ø 250 mm Max. vise opening 100 mm Engine power (2-stage) 0.95 / 1.32 kW Speed 40 / 80 rpm Connection voltage 400 V Fuse 16 A Weight 91 kg Without a base, can be purchased separately.

electric motor, three-phase motor -Power: 1.1 kW -Voltage: 220/380 V -Speed: 2845 rpm -Shaft: Ø 19 x 40 mm -Design: B3 -Protection class: IP 54 -Dimensions: 270/155/H235 mm -Weight: 10.3 kg

with Robot WITTMANN W713-0114 - Screw diameter: 55 mm - Clamping force: 200 kN - Injection volume: 427 cm? - Mould opening stroke max: 650 mm - Platen size (h x v): 715 x 715 mm - Distance between tie-bars (h x v): 520 x 520 mm - Operating hours: 24.453 - Power: installed max: 15 + 30 kW - Dimensions (long x wide x high): 6.000 x 1.500 x 2.400 mm - Weight: 6.500 kg - Weight: 6.630 kg

electric motor, three-phase motor -Power: 1.1 kW -Speed: 2845 rpm -Shaft: Ø 19 x 40 mm -Design: B3 -Protection class: IP 55 -Quantity: 1x available -Price: per piece -Dimensions: 275/156/H195 mm -Weight: 9.6 kg

TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -without hose package -Max. Welding power: 250 A. -Air cooled -Incl. Ground cable -Gas valve -Dimensions: 370/720/H870 mm -Weight: 52 kg

Electric motor, three-phase motor -Power: 0.55 kW -Speed: 2840 rpm -Shaft: Ø 14 x 40 mm -Construction: B5 -Protection class: IP 44 -Dimensions: 225/193/H180 mm -Weight: 6.3 kg

Electric motor, three-phase motor -Volt: 415 V. -Power: 0.063/0.4 kW -Speed: 460/2840 rpm -Shaft: Ø 17 x 35 mm -Construction: B14 -Protection class: IP 65 -Dimensions: 330/220/H170 mm -Weight: 9 kg

Electric motor, three-phase motor -Manufacturer: MEZ, electric motor type 2AP71-2s -Power: 0.37 kW -Speed: 2780 rpm -Shaft: Ø 14 x 30 mm -Construction: B3 / B14 -Protection class: IP 44 -Number: 3 motors available -Price per piece -Dimensions: 205/152 / H180 mm -Weight: 6.2 kg/pc.

Three-phase motor, electric motor -Power: 9.2 kW -Speed: 2900 rpm -Shaft: Ø 38 x 60 mm -Construction: B5 -Protection class: IP 54 -Number: 3x available -Price: per piece -Dimensions: 450/310/H257 mm -Weight: 55 kg

Servo motor, electric motor, DC motor, stepper motor, stepper motor -Motor comes from a Weisser Heilbronn Type 29 CNC lathe -Speed: 2000 rpm -Power: kW -Design: B5 -Shaft diameter: Ø 30 mm -Quantity: 1 piece available -Dimensions: -Weight: 20 kg

Three-phase motor, electric motor -Power: 30 kW -Speed: 2945 rpm -Protection class: IP 55 -Construction: B5 -Shaft: Ø 55 mm -Number: 1x available (1x without fan cover and fan disc) -Price: per piece -Dimensions: 760/400/H500 mm -Weight: 237 kg

Electric motor, light current motor -Power: 0.37 kW -Speed: 2850 rpm -Shaft: Ø 16 mm -Design: B5 -Protection class -Dimensions: 265/143/H143mm -Weight: 9.4 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Transfer in current condition as seen -Speed: 112/224 rpm -Power: 0.5/0.7 kW -Construction: B3 -Diameter shaft: Ø 24 mm -Protection class: IP 54 -Dimensions: 400/220/H205 mm -Weight: 23 kg

Three-phase motor, electric motor -Power: 4 kW -Speed: 2895 rpm -Shaft: Ø 35 x 90 mm -Construction: B5 -Protection class: IP 44 -Dimensions: 450/300/H250 mm -Weight: 42 kg

brake motor, electric motor, three-phase motor -Power: 0.25 kW -Speed: 2800 rpm -Shaft: Ø 11 mm -Design: B14 -Protection class: IP 54 -Quantity: 2 available -Price: per piece -Dimensions: 275/122/H185 mm -Weight: 6.6 kg

Electric motor, three-phase motor -Volt: 415 V. -Power: 0.063/0.4 kW -Speed: 460/2840 rpm -Shaft: Ø 17 x 35 mm -Construction: B14 -Protection class: IP 65 -Price: per piece -Number: 3x available -Dimensions: 395/210/H190 mm -Weight: 7 kg

electric motor -Power: 0.25 kW -Speed: 2800 rpm -Brake: 220 V -Shaft diameter: 14 mm -Design: B14 -Protection class: IP 44 -Dimensions: 275/140/H176 mm -Weight: 9 kg

Three-phase motor, electric motor -Power: 0.25 kW -Speed: 2765 rpm -Shaft: Ø 11 mm -Design: B3 -Protection class: IP 54 -Dimensions: 210/124/H170 mm -Weight: 5 kg