juice press used for sale

Novacor Diasys Integra II – ABPM Blood Pressure Holter (ECG / NIBP) Manufacturer: Novacor Model: Diasys Integra II Contents: Housing only, as shown in the photos Functions: Ambulatory measurement of systolic, diastolic, average pressure and heart rate; auscultatory, oscillometric and automatic modes Weight: Approx. 195 g Condition: Good, functionally tested Auction-ID: A1-51275-35

With buffer tank; with water meter; engine brand Elmot Schäfer 2.2kW; on pallet Auction-ID: A1-50864-55

Robust metal structure with several adjustable clamping stations. Parallel groove work table, equipped with 3 set screws with operating handles. Set on metal frame with mobile supports on wheels, ideal for pressing and assembly operations. Size: 2500 x 1250 Functional Auction-ID: A1-51273-24

Has N2 Nitrogen been in; Test pressure 16.5 bar; blue lacquered metal; equipped with lifting eyes Auction-ID: A1-50864-196

Auction-ID: A1-51211-62

Galvanized metal; equipped with lifting eyes Auction-ID: A1-50864-92

On adjustable tripodLot is equipped with flange valves and wall-mounted pressure gauge Auction-ID: A1-50864-80

Test pressure 16 bar; blue lacquered metal; equipped with lifting eyes Auction-ID: A1-50864-91

Tank capacity is 2000 liters; Lot is sold up to 1st flange coupling; equipped with lifting eyes Auction-ID: A1-50864-79

Colin BP-508 – Blood Pressure Monitor Manufacturer: Colin Model: BP-508 Type: Vital Signs/Blood Pressure Monitor Condition: Used, Functional Tested Suitable for Recovery Room, Outpatient Surgery, Endoscopy and Emergency Department. Auction-ID: A1-51275-10

Metal construction with cylindrical hopper, filling valve, . Equipped with a set of taps, All connection fittings and lever valve control included. Functional Auction-ID: A1-51273-36

proof pressure 16.2 bar; equipped with lifting eyes Auction-ID: A1-50864-67

Tank capacity 5000 liters; proof pressure 15.73 bar; equipped with lifting eyes Auction-ID: A1-50864-82

pressure: 60 t throat: - mm stroke: - mm total power requirement: - kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Eccentric press, single-column press, stamping press, single-column eccentric press, eccentric press, single-column press -Handover: in its current state as seen -Control: not working -Manufacturer: GEV GEBR. EDELHOFF, Single-column eccentric press type EPR 35 -Pressure capacity: 35 tons -Coupling: pneumatic -Drive: 3 kW -Stroke: adjustable 5 - 75 mm - Stroke rate: 120 rpm -Table size: 500 x 380 mm -Table cutout: 220 x 175 mm -Protrusion: 195 mm -Punch holder: Ø 40 mm -Insertion height 310 mm -Dimensions: Press 1520/920/H1960 mm / Control 800/400/H1100 mm -Weight: 1729 kg / 132 kg

: neu : ca. 12 Wochen ab Auftrags : Türkei : 62500 € : 1181.25 € : 40 to : 1250 mm : Y1 / Y2 / X und R Achse : 200 mm : 1050 mm : 250 mm : 440 mm : servomotorischer Spindela : 115 mm/s : 10 mm/s : 115 mm/s : 650 mm : 250 mm : 1000 mm : 7.2 kW : 1950 mm : 1450 mm : 2650 mm : 3600 kg servomotorized spindle drive 4 axes (Y1, Y2, X and R) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet interfaces for import, backup and programm tran ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 65200 € : 1232.28 € : 40 to : 2050 mm : Y1 / Y2 / X und R Achse : 200 mm : 1700 mm : 350 mm : 440 mm : servomotorischer Spindela : 180 mm/s : 10 mm/s : 115 mm/s : 650 mm : 250 mm : 1000 mm : 7.2 kW : 2600 mm : 1450 mm : 2650 mm : 4400 kg servomotorized spindle drive 4 axes (Y1, Y2, X and R) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet interfaces for import, backup and programm tran ...

CONTINUOUS STEAMING AND SHRINKING OF YARNS THROUGH WATER VAPOR AT 100°

Key data: 40 t, 1500 mm

1500 x 40 ton Cybelec Cybtouch 12" X & Z Axis

Rated force: 125t, stroke adjustment: 20-140mm, ram adjustment: 80mm, stroke rate: 50/min, motor power: 10HP, drive: mechanical eccentric drive, machine is fully functional, maintenance, repairs and safety inspections have been carried out regularly, inspection logbooks and inspection reports are available for the period 2010-2025, extensive maintenance and repair work has been carried out in recent years, including work on the connecting rod and connecting rod bearing, eccentric bushing, bearing points, gear coupling, brake and clutch shoes, bearings, bushings, lubrication system, lubrication pump, parallel keys and other components. On-site inspection is possible.

Pressing force: 100t, distance between uprights: 1030mm, stroke: 600mm, max. installation height: 900mm, table dimensions X/Y: 1000mm/1000mm, table height above floor level: 850mm, lateral opening between uprights: 540mm, ram dimensions X/Y: 900mm/1000mm, oil capacity: 500l, drive power: 30kW. Machine dimensions X/Y/Z: approx. 2000mm/1700mm/4200mm, weight: approx. 10t. The press was mainly used for die tryout and pressing small batches. Documentation available. An on-site inspection with the machine powered on is possible.

Offered is a sheet-fed offset printing press with automatic perfecting device. Min. sheet size: 100 × 148mm. Max. printing area X/Y: 650mm/460mm. Printing speed: 4000-15000 sheets/h. Impression count: 21 million. Substrate thickness: 0.04-0.4mm. Printing plate size X/Y: 650mm/550mm. Printing plate thickness: 0.20-0.30mm. Rubber blanket size X/Y: 579mm/648mm. Rubber blanket thickness: 1.95mm. Gripper margin: approx. 10mm. Control system: Sakurai Interactive System. Inspection possible by arrangement.

Working width: 3000 mm working depth: 1200 mm Number of pressing surfaces: 3 Stk. range L-W-H: 4500 x 2200 x 2100 mm Weight: 1500 kg TRIMWEX hydraulische 3 - Etagenpresse Typ SLV - HPR3 - 100 Technische Daten - Arbeitslänge 3000 mm - Arbeitsbreite 1200 mm - Verleimdicke 20 - 100 mm - Anzahl der Ebene: 3 - Verpressung erfolgt mit einseitigem hydraulischen Zylinder - Anzahl der Zylinder pro Ebene 6 - die Druckzylinder sind fest - Zylindertyp Ø 50 x 150 mm - Spezifische Druck 4,5 kg/cm2 - Anzahl der Niederhaltern pro Ebene 4 - jeder Niederhalter hat einen pneumatischen Zylinder - Typ der pneumatische Zylinder Ø 50 x 75 mm - jeder Niederhalter hat eigenes Ventil für Ein/Aus der Luft - Druckregulation mit Regulator - Hydraulisches Aggregat - Pumpendurchfluss 5,5 l - Leistung der Hydromotor 2,20 kW - max. Druck für der Hydromotor 30 - 130 bar - Parkplatz für die Niederhal ...

Channel baler Paal Konti 275 D, built in 2001 with vorbulator and chain belt conveyor Paal KEM-1500, built in 2005 Technical data: Manufacturer: Paal Type Paal Konti 275 D Year of manufacture 2001 Operating hours 20900 as of 10/2026 Pressing force 75 t Total connection 106 kW Filling opening 1020 x 1550 mm Bale dimensions 750 x 1100 mm, length variable 4-fold automatic tying Throughput at 35 kg/m³ approx. 12 t/h 60 kg/m³ approx. 21 t/h 100 kg/m³ approx. 33 t/h Bale weight 500 to 750 kg Transport dimensions approx. 11152 x 2152 x 2800 mm (LxWxH) Machine weight approx. 25,000 kg Type Paal KEM-1500 Year of manufacture 2005 Drive power: 5.5 kW Conveying speed: 0.29 m/s Nominal width 1500 mm Wheelbase 17500 mm Length of feed belt: approx. 10000 mm Length of climbing section: approx. 9000 mm Gooseneck: approx. 1000 mm Slope angle: 28° Materials: pa ...

Pneumatic press-fit machine CIP-8P Technical data: Press force 80 kN, approx. 8 tons Force adjustment via display, accuracy 1 kg Compressed air 8 bar, min. 150 l/min Tool and shank diameter Total length 37 or 76 mm, of which 15 mm in the holder, Ø 12.7 mm Compatibility: Tools from other manufacturers can also be used External dimensions (L × W × H) and weight: 650 × 2,300 × 1,100 mm, 400 kg Warranty: 36 months after delivery

Key data: 44 t, 1600 mm, 1530 mm

Electric Press Brake C15 - IRIS+ Angle Measuring System CoastOne - Made in Finland Year of manufacture: 2025 - Project machine Pressing force: 44T Bending Length: 1600mm Spindles: 2x22T Control: TC15-2D Graphics Light barrier: Lazersafe IRIS+ angle measuring system Back gauge: 5 axis controlled X-R-Z1-Z2-Dx axles Bending tool holder: Type manual WILA / TRUMPF / Type B Light working area front and rear Front support table - height adjustable Double foot pedal for opening and closing the Y-axis 1x set of bending tools incl. 36 months warranty after installation Delivery excl.; available immediately Viewing under power possible at any time by appointment!

Offer 26180 Technical data: - Max. pressing force 100 t - Max. ram stroke approx. 500 mm - Installation height approx. 1000 mm - Projection to the middle of the ram 520 mm - Pusher clamping surface 350 x 350 mm - Plunger clamping pin 40 mm - Table size 1000 x 1150 mm - Table opening 150 x 780 mm - Table height above floor 720 mm - Drive 400 V / 8 kW - Space requirement approx. W 1150 x H 2900 x D 2150 mm - Weight approx. 4800 kg

Equipped with foot control. Auction-ID: A1-41281-322

equipped with extraction Auction-ID: A1-50707-126

motor power 3.0 kW, speed 1,450 rpm, maximum pressure 4 bar, including intake filter and silencer, completely mounted on frame, suitable for air transport and aeration applications, used, operation not tested. Auction-ID: A1-41281-274

Consisting of five 16mm cable press boxes, each box 500 pieces (tot 2500 pieces) And three metal boxes with cable presses of various sizes Auction-ID: A7-51362-48

Dimensions: 687 x 80 x 97 cm (L/W/H) Spare parts for paper production/spiral conveyors Auction-ID: A1-51285-436

Dimensions: 687 x 80 x 97 cm (L/W/H) Spare parts for paper production/spiral conveyors Auction-ID: A1-51285-435

Equipped with: hydraulic unit, control, foot control and several sets of press jaws. Auction-ID: A1-41281-257

equipped with filter; 12 Volts; mounted on wall board; Auction-ID: A1-50707-31

pressure: 220 t chamfer lenght: 4175 mm distance between columns: 3760 mm column arm: 410 mm dayligth: 450 mm stroke: 180 mm ajustment speed: 100 mm/sec working feed: 8.0 mm/sec return speed: 75.0 mm/sec table width: 180 mm table height: 960 mm oil volume: 190 l 0: 295 bar controlled axis: 5 Anzahl Number of working hours: ca. 9.400 h total power requirement: 15.0 KW weight of the machine ca.: 16000 kg. range L-W-H: 4810 x 2200 x 2990 mm Very good / well-maintained condition () Only approx. 9.400 operating hours - Verified condition - Machine video - https://www.youtube.com/watch?v=nDcOAjUtNi0 Equipment: - CNC electro-hydraulic press brake - Equipped with AMADA OPERATEUR CNC control - 5 controlled axes (Y1+Y2/X1+X2/R) - Swiveling control panel (on the left) - CNC-controlled depth adjustment (Y-axis) - CNC-controlled backgauge adjustment (X-axis) - CNC-controlled vertical adjustment of  ...

pressure: 220 t chamfer lenght: 4100 mm distance between columns: 3600 mm column arm: 410 mm ram stroke speed: 150 mm/sec work speed: 10.0 mm/sec return speed: 140 mm/sec work stroke: 265 mm dayligth: 480 mm table height: 900 mm table width: 110 mm oil volume: 300 ltr. voltage: 400 Volt total power requirement: 18.5 kW weight: 15000 kg range L-W-H: 5000 x 2400 x 2850 mm ALPMAC Manufacturer Video: https://www.youtube.com/watch?v=_FxXyPAcxlE https://www.youtube.com/watch?v=YfkX9RwWv_0 ALPMAC Product Video Model B: https://www.youtube.com/watch?v=lmT1tfy43WE --------------------------------------------------------- MODEL SERIES B175-3100 - CNC electro-hydraulic press brake with: increased installation height increased cylinder stroke increased throat depth -------------------------------------------------------- ! MADE FROM CERTIFIED QUALITY STEEL (ST 37-42-52) ! HIGH-PERFORMANCE HYDRAUL ...

For Sale: ORMA NPL-8-160 Hydraulic Hot Press – 160 Tons The machine is used, has undergone a technical inspection, is fully operational, and is ready for use. Before purchase, the machine can be started and thoroughly inspected at our company's premises. The main advantages of this machine include a maximum pressing force of 160 tons, the ability to operate using only the central hydraulic cylinders when gluing shorter workpieces, and an automatic pressure compensation system. The press is equipped with heating platens suitable for water, glycol, or oil heating, as well as a pressing time controller with automatic platen lowering at the end of the cycle. Technical Specifications: • Manufacturer: ORMA • Model: NPL-8-160 • Year of manufacture: 1991 • Platen dimensions: 3500 × 1300 mm • Maximum opening between platens: 480 mm • Flat, clean platens, free from  ...

Baler Bramidan Model HDX50 Type PEV Year of manufacture 2005 Electric drive 5.5 kW Pressing force 50 t Filling opening 1,090 x 610 mm Bale size 1,200 x 800 x 1,100 mm Stroke 1,210 mm Cycle duration avg. 22 s 4 lacing + lacing ribbon or steel wire Automatic bale ejection Dimensions: Length 1,965 mm x Width 1,365 mm x Height 2,540 mm Weight 2.5 t Sale against bid from location D - BL Thuringia Code No. Q53

hydraulic 4-fold book press, format per station 440 x 280 mm,

Brand: Kremer Type: KR-4510HW Working pressure: 110 bar Temperature: 30°C to 110°C High-pressure hose: 10 meters of high-pressure hose Equipped with: tank for detergent Boiler: diesel-fired Heat Recovery: 42 kW Capacity: 600 liters per hour Connection: 230 volts Electric power: 3 kW Speed: 2800 rpm Weight: 100 kg Includes: high-pressure gun, high-pressure hose, brass coupling, 4 different spray nozzles and manual Condition: unused, in the original packaging Auction-ID: A3-46110-1318

garage press Type: Pneumatic-hydraulic workshop press Press force: 20 tons Cylinder stroke: 175 mm Working range: 0 – 910 mm Working width: 535 mm Operation: Pneumatically assisted hydraulic pump (air + hand pump) Frame: Heavy-duty steel H-frame construction with reinforcement plates Cylinder: Large diameter hydraulic cylinder, low working pressure Press stamp: hardened and chrome-plated Work table: height adjustable with support pins Pressure gauge: Integrated pressure gauge for precise force control Safety: pressure relief valve against overload Connection: 1/4\" compressed air connection (4–8 bar) Weight: approx. 100 kg Condition: Unused Auction-ID: A3-46110-1324

UMT AC770-19 | 19 Liter High Pressure Compressor is a professional, robust high pressure compressor with a capacity of 19 liters, designed for demanding applications in industry, workshop or garage. This compressor offers an excellent balance of power, capacity, and ease of use, making it ideal for applying pressure for paintwork, pneumatic tools, and cleaning operations. Capacity: 19 liter reservoir for continuous and stable pressure delivery. Construction: Strong, durable housing with high-quality materials for long-lasting use. Motor: Powerful motor that comes up to pressure quickly and is suitable for intensive use. Pressure level: Suitable for high-pressure applications, with a maximum working pressure that meets industry standards. Ease of use: Easy operation, with pressure control and safe pressure release valve. Mobility: Compact and portable design, ideal for use in a variety o ...

DiBO JMB-S+ 250/15 T AK (GN) – Professional hot water pressure washer on trailer DiBO mobile professional pressure washer in near-new condition, with very few signs of use. Clean and particularly well-preserved machine. Designed for heavy-duty cleaning work, it has a maximum pressure of 250 bar with a flow rate of 15 l/min and a water temperature of up to 110 °C. Diesel heater with an output of 70 kW and a diesel engine of 12.5 kW. Equipment including: GreenBoiler System Reel with high-pressure hose Cleaning gun Electronic control panel with display Emergency stop Protective cover Maximum pressure: 250 bar Flow rate: 15 l/min Maximum temperature: 110 °C Heating: diesel, 70 kW Engine: diesel, 12.5 kW Power supply: 12 V The set is mounted on a 750 kg single-axle DiBO trailer from MMA, equipped with a jockey wheel and a coupling device. Professional machine close t ...

Brand: Kremer Type: KR-7300WH Working pressure: 200 bar Temperature: 30°C to 110°C High-pressure hose: 10 meters of high-pressure hose Equipped with: suction hose for cleaning agent Boiler: diesel-fired Heat Recovery: 58 kW Capacity: 900 liters per hour Connection: 400 volts Electrical power: 7.3 kW Speed: 1450 rpm Weight: 128 kg Includes: high-pressure gun, high-pressure hose, water filter, brass coupling and manual Condition: unused, in the original packaging Auction-ID: A3-46110-1317

Working pressure 150bar – 15Mpa. Work extremely powerful and absolutely environmentally friendly! Maximum temperature 90°C - 284°F Maximum pressure 150bar – 15Mpa Capacity 900 l/h – 15 l/min burner power 3600W motor power 3.0 kW power supply 230V/50Hz detergent tank diesel Auction-ID: A1-40333-149

12 pieces ring dies Paladin 2400 CAV for pelletizing mill Andritz type Paladin 2400-250/ 2R BM Perforation 16/22 mm Pockets milled out for special rolls Material X46Cr13 unused = new Price per unit net ex location 6,250,-- € + VAT Sale from BL Brandenburg Code Q17

Code: 0511 Brand: POR Model: JUNIOR - CE Standard Briquetting machine for compacting various materials: wood sawdust, cork, polystyrene, polypropylene, polyurethane, rubber, plastic, yarn powders, leather powders, paper, coffee husks, etc. - CE Standard Technical data Briquette diameter mm 50 Max briquette length mm 60 Output kg/h 30/50 Motor Hp 7,5 Drum diameter mm 1000 Pump lt 40 Inspection door Overall dimensions mm 1680 x 1100 x 1500 h Weight kg 680

Solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, directional control valve, valve, 4/3-way valve, control valve, check valve, pressure relief valve -Manufacturer: ARGO HYTOS, pressure relief valve unused -Type: MB06-VP 556-0331 -Pmax: 320 bar -Quantity: 10x valve available -Price: per piece -Dimensions: 100/45/H45 mm -Weight: 1.0 kg/pc.

Type: Hot water high-pressure cleaner Working data Water heating: Diesel-fired boiler Pressure adjustment: Yes Water temperature adjustment: Yes Chemical dosing: Adjustable Pressure gauge: Integrated Power supply: Electric Equipment Integrated detergent tank Integrated fuel tank for burner Transport wheels Push handle Control panel with temperature and detergent adjustment Remarks Used hot water high-pressure cleaner in non-tested condition. Machine shows normal signs of use, scratches and paint wear consistent with age. High-pressure hose, spray gun and lance are not included unless shown separately. Sold as shown in the photos. Approx. own mass: 130 kg Auction-ID: A1-50932-100