juice press used for sale

Hammelmann HDP 164 Pompe Pression : 2 400 bars Débit : 35 l/min Moteur : Volvo Penta Différents accessoires disponibles : pièces détachées, tuyaux, câbles, arme, etc. Machine toujours entretenue et surveillée Factures d’entretien disponibles Équipement prêt à travailler

General Description High-speed mechanical stamping press manufactured by JELŠINGRAD under licence from Hermann Raster KG, Germany, model BPA-75 . Heavy-duty press designed for high-volume progressive-die stamping, punching and blanking from coil. Technical Details Manufacturer: JELŠINGRAD Model: BPA-75 Year: 1985 Serial number: 8510917 Nominal pressing force: 750 kN / 75 t Stroke rate: Infinitely variable 120–600 strokes/min Ram stroke: 10 / 50 mm Working hrs: aprox. 13000 Ram adjustment: 80 mm Maximum daylight: 400 mm Table: 1,250 × 750 mm Distance between uprights: 730 × 620 mm Maximum strip width: 300 mm Strip feed height: 100–130 mm Feed length per stroke: 5–15 mm Motor power: 15 kW Power supply: 3 × 380 V, 50 Hz Air clutch and brake Compatible with pneumatic strip feeding equipment, which is installed on machine Electrical cabinet and controls inc ...

Dowel and slotted hole drilling machine GANNER JUNIOR 320 LBM very good condition, as good as new, the machine comes from a small carpenter's shop and was used there very little This allows slotted holes to be milled and dowel holes to be drilled in 2 planes without reclamping 380V, 1500W Speed: 2800 rpm Year of Make: 1990 with the machine you can mill slotted holes for e.g. lock cases and similar things or make all kinds of frame and dowel connections, at right angles, blunt and mitred ideal for the production of dowel joints in timber frame construction, furniture, doors, windows and stairs construction and for similar things by drilling on 2 levels, by the grids and stops and by the construction of the machine, dowel connections are made in the shortest possible time, which makes the machine very economical the machine requires a compressed air connection of 6bar (the air  ...

Technical data Maximum pressure: 16 tons Power connection: 400V / 4kW Press force: 2.08 kg/cm² Year of Make: 2006 Bale size: 1100x700x800 mm Productivity: approx. 3 bales/hour Bale weight: approx. 150-250 kg Machine is fully functional after technical supervision.

Offered are two Weingarten single-column eccentric presses. 1) Weingarten AR 125 single-column eccentric press, delivered: 1970, pressing force: 125t, max. sheet thickness: 13mm, stroke rate: 44/66strokes/min, ram stroke: 20-120mm, ram adjustment: 100mm. 2) Weingarten AR 125 single-column eccentric press, delivered: 1974, pressing force: 125t, stroke rate: 42/62strokes/min, ram stroke: 20-120mm, ram adjustment: 100mm. Inspection possible by arrangement.

The system is designed for the semi-automatic gluing and pressing of finger-jointed box bodies made of solid wood and plywood, the system is floor-mounted and can be manually adjusted to accommodate different box sizes, up to two pneumatic cylinders can be installed on each of the four sides of the boxes for pressing, for smaller boxes the number is reduced to one cylinder per side, a dispensing system is provided for glue application, which applies the glue to the finger joints of the boxes using assembly aids, equipment: table made of aluminum profiles, two aluminum profile rails each in longitudinal and transverse direction, adjustable to the required box size using clamping levers, up to four pneumatic diaphragm cylinders for clamping the longitudinal sides, four guided pneumatic cylinders with brackets for moving the assembly aids, up to eight pneumatic cylinders for pressing the bo ...

Technical data Maximum pressure: 54 tons Power connection: 400V / 7.5 kW Pressing force: 5.62 kg/cm² Year of Make: 2004 Bale size: 1200x800x1200 mm Productivity: approx. 2 bales/hour Bale weight: approx. 500 kg Bale tying only with wire Machine is fully functional, after technical inspection and after renovation

Universally applicable frame and slotted hole drilling machine Especially for window construction and universal use due to pneumatic height adjustment Duelhole drilling on two planes in one clamping Motor power 1.5 kW Start of the motor with practical handle switch With two-jaw chuck 1 - 20mm from Röhm Pneumatic adjustment of the processing height, dowels on two levels without changing. The desired drilling heights can be set for each drilling level with a digital counter, the changeover then takes place pneumatically from the front Transverse adjustment 430mm, infinitely variable or in 12mm increments Maximum height adjustment approx. 100mm above table height Drilling stroke approx. 150mm 2 pneumatic workpiece clamps Grid rail for quick adjustment on the side in 12mm grid Stop for length adjustment in slotted milling 2 swivelling workpiece supports Special stop syst ...

Technical data Maximum pressure: 50 tons Power connection: 400V / 4 kW Press force: 5.2 kg/cm² Year of construction: 2013 Bale size: 1200x800x1100 mm Productivity: approx. 2 bales/hr Bale weight: approx. 500 kg Price: on request Machine is fully functional, after technical inspection and after renovation

pressure: 125 t chamfer lenght: 3200 mm distance between columns: 2700 mm throat: 350 mm mould space: 395 mm stroke of upper beam: 160 mm work height max.: 900 mm working feed: 9 mm/sec return speed: 90 mm/sec total power requirement: 11 kW weight of the machine ca.: 8,6 t dimensions of the machine ca.: LBH 3,3 x 1,7 x 2,54 m -Electronic position display -Motorized backgauge -Crowning system -Upper tools as shown -x-bending die -Lazersafe safety system -Foot pedal -Operating manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data Maximum pressure: 20 tons Power connection: 380V / 2.2kW Pressing force: 2.6 kg/cm² Productivity: approx. 6 bales/hour Bale size: 1100x700x800 mm Price: on request Bale weight: approx. 200 kg Year of Make: 1991 Machine is fully functional, after the technical inspection.Price also includes the paint renovation

High-pressure centrifugal pump Grundfos CR120-6-1 used, 55 kW, 120 m³/h flow rate, 127 m head good condition

Key data: 100 t

Manufacturer: Hidroliksan Model: CFSS 100t Year: 2022 Condition: Used Stock number: 9614 Operating hours: 800 h Compressive force: 100 t Table length: 800 mm Table width: 500 mm Stroke: 400 mm Machine height: 2930 mm Machine length: 1600 mm Machine width: 1700 mm Machine weight: 6000 kg

Key data: 600 t, 550 mm

RÖCHER hydraulic press from the site.

Code: 0499 Brand: COMAFER Model: DINAMIC 70/60 - CE Standard Hydraulic briquetting machine for compacting sawdust and wood shavings, for joinery workshops, furniture, bespoke furnishings, wooden joinery and other applications – CE Standard Technical data: The advantages of briquettes are: Twice the calorific value of wood Almost no residue after combustion Much cleaner boilers Briquette diameter 65 mm Output 30/80 kg Pump motor 7,5 Hp Wood chip hopper diameter 1000 mm Overall dimensions mm 1100 x 1800 x 1650 h Weight kg 800

General Description Mechanical stamping press manufactured by ILR , designed for heavy-duty metal forming and stamping operations. The machine has been fully modernized with a PLC control system and is suitable for manual or automatic operation with a sheet feeder. Technical Details Manufacturer: ILR Machine type: Mechanical press Year of manufacture: 1972 Year of refurbishment: 2024 Press force: 250 t Stroke rate (manual): 45 strokes/min Stroke rate (automatic): 20 strokes/min Table size: 1,120 × 740 mm Stroke: 400 mm PLC-controlled digital operating system Operating modes: • Automatic with sheet feeder support • Foot pedal control • Two-hand control Safety light curtains installed Condition Used industrial condition. The machine was refurbished in 2024 and upgraded with a modern PLC control system. Equipped with safety light curtains and multiple operatin ...

Frame press Maweg hydraulic Type: EURO-AUTO Year of Make: 1991 Machine No. 09111003001 Crimping dimension L 2700 mm x H 1800 mm 3 movable press rams with 1 hydraulic each. Cylinder from above 1 movable stop beam from the right with 2 hydr. cylinders Bearing surface of the printing plates 120 x 100 mm Cylinder stroke 200 mm 3 brackets for low parts, length 300 mm Pneumatic quick adjustment system of the upper press punches With 3 mm rack and pinion grid system 2 Hand Safety Automatic Control complete with hydraulic pump Dimensions 3600 mm x 900 mm x H 2500 mm

Technical data Maximum pressure: 8 tons Power connection: 400V/4kW Press force: 3.23 kg/cm² Year of Make: 1991 Bale size: 550x450x350 mm Productivity: - Bale weight: 30-60 kg Price: on request Machine is fully functional after technical supervision.

Pistol grip with 30 cm rubber hose with grease fitting Foot lever Steel drum cover Steel bucket with 6 liter capacity 180 cm high-pressure rubber hose Auction-ID: A7-50799-149

Joos HP 90 Hydraulic veneer press with electric combi heating plates For sale is a well-maintained veneer press with the following data: -Pressing area 2.55m x 1.35m -Height of the pressing room 0.4m -Operating pressure 355 bar -Basic dimensions 2.98m x 1.53m x 2.1m

Used Comark C9557 pressure gauges Runs on 9V battery Auction-ID: A1-50936-222

Used Druck DPI 705 Digital Pressure Gauges/Indicators Battery operated Auction-ID: A1-50936-223

Code: 0412 Brand: ORMAMACCHINE Model: NPC/R 35/13 - CE Standard Hydraulic hot press for joinery, furniture, bespoke furnishings, veneering, panels, doors, wooden joinery, composite materials and miscellaneous items – CE Standard Sturdy construction Solid perforated steel platens 3500 x 1300 mm Fixed lower plate – Movable upper plate Plate thickness 80 mm 6 pistons diameter mm 85 Total thrust 120 ton Option for either oil or steam heating Installed power 8 Kw Overall dimensions mm 4500 x 1550 x 2700 h Weight kg 10000

Pneumatic spray gun to be used in combination with a paint tank. Auction-ID: A7-50799-425

The electronic digital tire pressure gauge is a modern device that allows you to quickly and accurately check your car's tire pressure. Auction-ID: A7-50799-239

Pressure 20 bar, max flow rate 360 l/h, never used Overall dimensions: 300 x 300 x 700 mm Weight: 10 kg Auction-ID: A7-50798-316

The electronic digital tire pressure gauge is a modern device that allows you to quickly and accurately check your car's tire pressure. Auction-ID: A7-50799-139

Pistol grip with 30 cm rubber hose with grease fitting Foot lever Steel drum cover Steel bucket with 6 liter capacity 180 cm high-pressure rubber hose Auction-ID: A7-50799-49

Hydraulic press for climping hydraulic pipes, equipped with all the necessary dies for pipes from 0.5 to 50 mm, never used 0 hours and packed in a wooden crate Overall dimensions: 1000 x 1000 x 1200 mm Weight: 310 kg Auction-ID: A7-50799-110

Manual gantry press 20 tons Overall dimensions: 1200 x 800 x 500 mm Weight: 100 kg Auction-ID: A7-50798-176

Batch of used clock gauge/pressure gauges Auction-ID: A1-50936-255

Batch of high-quality stainless steel pressure hoses with ball valve Auction-ID: A1-50936-54

Pressure 20 bar, max flow rate 360 l/h, never used Overall dimensions: 300 x 300 x 700 mm Weight: 10 kg Auction-ID: A7-50799-355

Pistol grip with 30 cm rubber hose with grease fitting Foot lever Steel drum cover Steel bucket with 6 liter capacity 180 cm high-pressure rubber hose Auction-ID: A7-50799-249

An air dryer with filter and regulator, equipped with a standard 1/4\" air inlet connection. The device is designed to purify the incoming air from most liquid and solid particles. It is equipped with a pressure regulator that allows precise adjustment of the outlet air pressure, from 0 to 150 PSI. Auction-ID: A7-50799-162

Used Druck DPI 705E digital pressure gauges/ indicators Battery operated Auction-ID: A1-50936-221

Manual gantry press 20 tons Overall dimensions: 1200 x 800 x 500 mm Weight: 100 kg Auction-ID: A7-50799-418

An air dryer with filter and regulator, equipped with a standard 1/4\" air inlet connection. The device is designed to purify the incoming air from most liquid and solid particles. It is equipped with a pressure regulator that allows precise adjustment of the outlet air pressure, from 0 to 150 PSI. Auction-ID: A7-50799-262

MKS 600 Series Pressure Controller (10 Torr) Type 252 Exhaust Valve Controller Type 152 Automatic Pressure Controller Baratron 390HA-00100SP12 (100 Torr) Valves & Actuators Tags HP Lamination Auction-ID: A1-51157-19

Capacity 4 ton, manual, never used Overall dimensions: 500 x 400 x 800 mm Weight: 50 kg Auction-ID: A7-50798-136

The electronic digital tire pressure gauge is a modern device that allows you to quickly and accurately check your car's tire pressure. Auction-ID: A7-50799-39

An air dryer with filter and regulator, equipped with a standard 1/4\" air inlet connection. The device is designed to purify the incoming air from most liquid and solid particles. It is equipped with a pressure regulator that allows precise adjustment of the outlet air pressure, from 0 to 150 PSI. Auction-ID: A7-50799-62

Batch used various manual high-pressure valves (Rotarex / Tescom / Veriflo / GTC) incl bucket Auction-ID: A1-50936-273

Pneumatic spray gun to be used in combination with a paint tank. Auction-ID: A7-50799-300

Used Mbraun vov-1250 vacuum pressure vessel / vacuum boiler, without trolley Auction-ID: A1-50936-31

Capacity 4 ton, manual, never used Overall dimensions: 500 x 400 x 800 mm Weight: 50 kg Auction-ID: A7-50798-249

Capacity 4 ton, manual, never used Overall dimensions: 500 x 400 x 800 mm Weight: 50 kg Auction-ID: A7-50799-347

Manual gantry press 20 tons Overall dimensions: 1200 x 800 x 500 mm Weight: 100 kg Auction-ID: A7-50798-224

Hydraulic die spotting press for assembly, adjustment, inspection, maintenance and testing of large moulds and dies. Year 1991. Serial no. 635/2036. Useful platen dimensions approx. 2,000 × 1,500 mm. Distance between columns 2,130 × 1,630 mm. Vertical stroke 1,200 mm. Maximum closing force 1,500 kN (approx. 150 t). Maximum opening force 350 kN (approx. 35 t). Adjustable hydraulic pressure 0–250 bar. Maximum load on lower platen 30,000 kg and upper platen 15,000 kg. Upper platen rotation 100° and lower platen rotation 70°. T-slots 22 mm, DIN 650. Lower platen height from floor 770 mm. Rapid approach speed 65–80 mm/s, working speed 8 mm/s and return speed 35–50 mm/s. Main motor power 11 kW, auxiliary motor 1.1 kW, total installed power 12.1 kW. Electrical supply 380 V / 50 Hz. Approx. overall dimensions 6,150 × 2,130 × 4,700 mm. Approx. machine weight 27,000 kg. Equipped with o ...

TECHNICAL DATA: Work surface: 2550 x 1350 mm Solid worktops Including mezzanine level 04 Hydraulic cylinder: Ø 90 mm Vertical stroke: 550 mm Water operation Installed power: 2 hp