juice press used for sale

ZTS KOSICE LE 160 C eccentric press was built in 1988 in Czechoslovakia by Závody Tažkého Strojárstva n.p. Košice. The machine is in very good technical condition and has been regularly maintained throughout its service life. All control solenoid valves were replaced in February 2023. ZTS KOSICE LE 160C is an excellent choice for a wide range of workpiece machining, i.e. punching, cutting and stamping. All of these machining processes are performed with a high press force of 160 tonnes, which, combined with a rigid design, enables the production of parts with high repeatability and excellent precision. The ZTS LE 160 C eccentric press weighs 10150 kg. Technical specifications of the ZTS KOSICE LE 160 C press - maximum press force: 160 t (1600 kN) - maximum number of slider strokes: 50/min - number of slider strokes in single mode: 30/min - maximum slider stroke: 120 mm -  ...

pressure: 400 t stroke: 300 mm table surface area: 1200 x 700 mm ram surface: 1200 x 700 mm dayligth: 500 mm adjustment of stroke: 300 mm return capacity: 348 kN capacity of ejector: 100 kN ejector stroke: 100 mm total power requirement: 65 kW weight of the machine ca.: 28 t dimensions of machine L x W x H: 4,4 x 2,75 x 4,0 m = Frame press Accessories: tool changing table - next safety inspection according to stamp 05/2021 - - with cutting shock absorption damping force 4000 kN damping stroke 5 mm spindle adjustment 200 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: manuell t distance between columns: 50 mm dayligth: 50 mm total power requirement: kW weight of the machine ca.: 0,01 t dimensions of the machine ca.: 0,3 x 0,3 x 0,3 m • 4 units available, • bore at bottom, Ø 10 mm, • thread in spindle M 6, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Frame press Hess hydraulic Type: HYDRO-LUX Crimping dimension approx. L 3550 m x W 2250 mm Connected load 380 V / 50 Hz 2.6kw Hydraulic Pump Machine dimensions Length 6600 mm x Width 1600 mm x Height 2770 mm 0 - 8 bar pneumatic Optoelectronic measurement query. The window scantlings are placed in the feed channel so that the photoelectric sensor can measure whether the pressure beams and press corners need to be opened or closed. If the light beam of the probe hits the window scantlings, the machine receives the command to drive up in width and height until the working dimension is reached. Workflow: Automatic dimensional adjustment loose insertion Automatic pressing process loose presentation remove Automatic dimensional adjustment Program selection options in the control system: 1. Automatic measurement adjustment via optoelectronic measurement query with a ...

Key data: 200 t, 500 mm, 200 mm

Lot 115: (1982) 200t Lauffer Hydraulic Press High-Speed Hydraulic Press with Advanced Shock Absorption This Lauffer hydraulic press is a high-performance machine designed for speed and precision, capable of 2,000 kN of pressing force. Its high-speed designation is backed by a rapid descent speed of 330 mm/sec and a sophisticated 8-fold flat guidance system to maintain ram alignment even under heavy or off-center loads. Technical Details Machine Type: Hydraulic Press Manufacturer: Lauffer Model: RPS 200 Year of Manufacture: 1982 Nominal Force: 200t Max. Return Force: 225 kN Max. Ram Stroke: 200 mm Shut Height: 500 mm Ram Guidance: 8-fold flat guidance Table & Ram Surface Area (W x D): 800 mm x 630 mm Table Hole Diameter: 204 mm Clearance Between Uprights (Front / Side): 840 mm / 320 mm Operating Speeds: Rapid Descent: 0 – 330 mm/sec (steplessly adjusta ...

pressure: 200 t chamfer lenght: 3000 mm distance between columns: 2560 mm dayligth: 450 mm throat: 450 mm adjustment of stroke: 240 mm horn length over column outer edge each: 175 mm table length: 3050 mm table width: 280 mm table height over floor: 820 mm electrics - voltage/frequency: 220/50 V/Hz control: CYBELEC, DNC60 stroke: 250 mm operating pressure: 150 bar total power requirement: kW weight of the machine ca.: 15 t dimensions of the machine ca.: L:4,0 x B:3,2 x H:3,44 m • hydraulical press brake, • new control CYBELEC DNC60 (in 2005), • lower part of the machine moves down 500 mm to the floor, at the moment the machine is mounted on a double-T-support, • prism and upper part of the machine in 3000 mm length The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table dimensions: 1000,400 mm pneumatic clamping: 2 St. moveable: Option For quick pressing of Minizinken- or Soflineverbindungen - Independent of the angle - Particularly suitable for arched manufacturing in window - Table size 1000 x 400 mm - Pneumatic connector 10 bar - Air consumption: 0.5 cdm / stroke - Two clamping cylinders for workpiece clamping - Right half of the table stored on hardened shafts via linear ball bearings - 1 pressure cylinders for linear displacement table - CE - execution (technical data according to manufacturer - without guarantee.!) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 3500 mm Working height: 2300 mm Number of cylinders: 4 St. Stable frame welded construction of thick-walled Special hollow profiles , sliding table and pressure beam with 50 mm hole pattern . On the left side continuous abutment for grouting the wide , lower abutment in 2 levels. Vertical pressing cylinder on specialty bar with one- quick adjustment with weight compensation in the 50 mm hole pattern adjustable in height. Long sliding table ensure the continuous recording of high jacking forces . Fast, smooth width adjustment with ball bearing Carriage with central fixation in 50 mm hole pattern. Upper horizontal press cylinder infinitely adjustable in height and equipped with counterbalance . Lower horizontal pressing cylinders with bore for two abutments levels without weight compensation . Abutment and pressure plate depth 100 mm Machine controlled electro -hydraulic wit ...

Key data: 250 t, 500 mm

Lot 116: (2018) 250t Hidroliksan Hydraulic Press Hydraulic Press with Integrated Die Cushion for Deep Drawing This 2018 hydraulic double-column press is a heavy-duty production unit designed for versatility, featuring a robust 250-ton capacity and high-quality Rexroth and SICK components. With its 100-ton integrated die cushion and generous 500 mm stroke, it is exceptionally well-suited for complex deep drawing and forming operations that require precise pressure control. Technical Details ‍ Machine Type: Hydraulic Double-Column Press Manufacturer: Hidroliksan Model: H-TYPE Nominal Force: 250t Return Force: 50t Stroke Length: 500 mm Speeds: Approach: 160 mm/sec Pressing: 5 – 15 mm/sec Return: 190 mm/sec Working Surfaces: Ram Plate: 1,000 x 800 mm Table Plate: 1,000 x 800 x 100 mm Components: Pump: REXROTH (71cc – 103 L/min) Motor: 22 kW (30 hp),  ...

1015 KW Dresser counterpressure steam turbine for sale. 35.000 € plus VAT FCA freely charged in D-Bergisch Gladbach. TUBRINE Brand: DRESSER-RAND (Nadrowski) Type: AVT 72 TW 17 Number: 16225-1 Electr. Power: 1015 KW Rated power: 1375 kVA Year of construction: 1995 (control units upgraded in 2008) Voltage: 400 V RPM: 1500 rpm Steam flow rate: 25 tons /h Dimensions (l x w x h): 4.50 x 2.40 x 2.30 m Inlet temperature: 253°C Inlet pressure : 18 bar Exhaust temperature : 152°C Outlet pressure : 5.0 bar Steam flow rate at the entrance: 25 tons/h Turbine weight: 11,000 kg Generator Brand: Leroy Somer Type: NWR 50 BL10-4P Electrical power : 1015 KW SWITCHBOARD Manufactured by TIL SA and updated in 2008 Schneider control

: 3400,4550 mm Working height: 2500 mm : 300 - 800 mm Glazing and control press RU-VGP3 Glazing and sealing press, clamping width max. 3150 mm, Length 3400 mm, width 900 mm, height 2500 mm, contact height 1900 mm, Pressing beam height 2400 mm, plant part covered with felt, installation surface as roller conveyor, lifting device from 300 - 800 mm. Left and right each a role as edge protection for elements up to 2500 mm height. (When ordering specify whether RIGHT or LINKER Pressbar mobile!) alternatively: ------------- RU-VGP4 Glazing and control press, version like RU-VGP3 however span max. 4000 mm, length 4550 mm (When ordering specify whether RIGHT or LINKER Pressbar mobile! (technical data according to manufacturer - without guarantee!) Price on request ! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping force: 450 kN injection volume: 135 cm³ screw diameter: 35 mm platen size: 600 x 400 mm Condition: used, Specification: C-frame injection moulding machine for TPE - used clamping unit: - clamping force: 450 kN - heating platen size: 600 x 400 mm - sliding table: yes - Clamping direction: from below - Ejector / lifter: Up + Lo Injection unit: - Injection volume max.: 135 cm³ - Screw diameter: 35 mm - Connected load: 3x 400 V, 50 Hz - Weight approx.: 5,500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 17,0 kN stroke: 60 mm throat: 105 mm Working height from to: 75 -180 mm table surface area: 170 x 130 mm spindle diameter: 25 mm weight of the machine ca.: 35 Kg dimensions: 260 x 130 x415 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 1,5 kN stroke: 40 mm throat: 70 mm Working height from to: 75 - 170 mm table surface area: 115 x 70 mm weight of the machine ca.: 11 Kg dimensions: 115 x 175 x 290 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

DIEFFENBACHER PO-F 1250 A hydraulic press was built in Germany in 1981 by J. Dieffenbacher GmbH & Co. The machine was regularly maintained and upgraded throughout its service life. In 2016, a major upgrade was carried out, which included replacing the electrical cabinet, installing light curtains and adding a SIEMENS SIMATIC HMI TOUCH touchscreen operator panel. The piston seals were also replaced and measuring scales were added for precise position measurement of the slider, top ejector and lower die cushion. The DIEFFENBACHER PO-F 1250 A is an extremely versatile hydraulic press for demanding metal forming applications. Its main purpose is die stamping of steel components, calibration of forgings, dogging, hot and cold forging, cold forming and other operations that require very high press forces. All these machining processes are performed with a high press force of up to 1250 tonn ...

TMP VORONEZH KA2536 crank press was built in 1979 in the USSR by the Voronezh Mechanical Press Plant (Воронежский механический завод). The offered machine is perfect for many industries, especially those which require high press force and high repeatability of produced parts. This is because it enables even the most demanding metal forming processes to be performed, i.e. stamping of structural components, forming of parts, hot and cold forging, deep drawing operations and the production of parts with a large surface area. All of these machining processes are performed with a high press force of 400 tonnes and can be carried out continuously, increasing production efficiency and reducing downtime to a minimum. The crank mechanism used ensures uniform force transfer, which translates into precise slider feed and repeatability of each cycle. This solution is part ...

pressure: 17,0 kN stroke: 40 mm throat: 110 mm Working height from to: 70 - 220 mm table surface area: 190 x 140 mm spindle diameter: 30 mm weight of the machine ca.: 60 Kg dimensions: 310 x 190 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 300 t working feed: 9 / 14 mm/sec stroke: 600 mm column daylight: 1550 mm : 600 adjustment of press crosshead: 1500 mm slide adjustment -horizontal: 3000 mm tank capacity: l feed speeds: 9 mm/sec return speed: 14 mm/sec total power requirement: 18,5 kW weight of the machine ca.: 35 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 t distance between columns: 0 mm stroke: 160 mm table surface area: 630 x 500 mm dayligth: 400 mm total power requirement: kW weight of the machine ca.: 5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

DIEFFENBACHER PO 500A hydraulic press was built in 1978 in Germany by J. Dieffenbacher GmbH & Co. The machine has been regularly maintained and upgraded throughout its service life. In 2017, a major upgrade was carried out, which included replacing the electrical cabinet, installing light curtains and adding a SIEMENS SIMATIC HMI TOUCH touchscreen operator panel. The seals and electrical system were also replaced. The DIEFFENBACHER PO 500A is the perfect choice for even the most demanding metal forming operations. It enables the execution of such operations as die stamping, punching, calibration of forgings and hot and cold bending. All these machining processes are performed with a high press force of up to 500 tonnes, which, combined with a highly dynamic slider, guarantees the best machining results. The machine is also characterised by a rigid body made of thick steel plates and a ...

Press force max.:: 1.000 kN heating plates:: 500 x 500 mm electrically heated:: °C heating power:: kW piston stroke:: ca. 500 mm no. of stages:: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 320 t throat: 800 mm stroke: 630 mm distance between table / ram: max. 1000 mm ram head dimension: 710 x 600 mm table-size: 800 x 1200 mm work height max.: 1015 mm quantity of oil: 1100 l Number of working hours: 7663 h weight of the machine ca.: 15 t dimensions: ca. 1600 x 2200 x 4800 mm dimensions of switch cabinet: ca. 1200 x 400 x 1800 mm Tested for function. During the test run it is noticed that the press ram not 100% leak-proof. In addition, the cable for manual operation was mended several times. Upper cover is missing, since this was dismantled by the customer due to crane use. Operating instructions and electrical plans available. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 2000 /1000 t distance between columns: 2650 mm stroke: 500 mm column travel -side: 500 x 1000 mm diameter of piston: 710 mm number of pistons: 2 distance between table / ram: 1000 mm operating pressure: 130 / 230 bar dayligth: 800 mm table length: 2500 mm table width: 1600 mm table height: 250 mm draw back pressure: 500 kN number of T-slots: 8 turning speeds: 1500 U/min rapid speed: 120 - 140 mm/min closing speed: max. 120 - 140 mm/sec. hydraulical ram locking: return of plunger by small single cylinders: 100 - 110 mm/sec cutting sound absorber: 300 t die cushion capacity: 200 t die cushion stroke: 250 mm speed of die cushion: 100 mm/sec voltage: 380 V frequency: 50 Hz quantity of oil: 2000 l total power requirement: 93 kW weight of the machine ca.: 90 t dimensions of the machine ca.: 5000 x 2500 x 7200 mm transport measurements: ca. 6500 x 3750 x 2190 mm 1991 assembly of a di ...

pressure: 140 t chamfer lenght: 3000 mm distance between columns: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 2010012 Type of machine Pressbrake Make COLLY Type 3000/140 Build in nb Chamfer lenght 3000 mm Pressure 140 ton Stroke 250 mm Throat 310 mm Daylight 520 mm Additional information incl. 1 set of tooling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

BECKER & VAN HÜLLEN deep drawing press was built in Germany by Becker & van Hüllen Niederrheinische Maschinenfabrik GmbH & Co. KG. The machine has been continuously maintained and upgraded throughout its service life. In 2022, a major upgrade was carried out, which included replacing the seals, upgrading the control system, installing light curtains and adding a SIEMENS SIMATIC HMI TOUCH touchscreen operator panel. The BECKER & VAN HUELLEN 650T is used in industries specialising in stamping, production of automotive parts, tanks and other parts that require high press force and multi-stage forming. Its main purpose is deep drawing. The machining process is performed with a high press force of up to 650 tonnes. The two-stage design allows successive forming stages to be carried out in a single work cycle, thus enabling the manufacture of parts with even the most complex shapes. The m ...

280T Servo Double Column Heating Press with Heating Plates We can offer you this press at a particularly low price, as the machine is already under construction and the original customer has withdrawn from the order for two identical machines. This makes it possible to purchase a high-quality servo-hydraulic double-column press with heating plates at attractive conditions and at comparatively short notice. The photos shown show similar, already built machines from the factory and serve as example pictures. Technical data + information: General information Press force: 280 t Type: Servo Double Column Heating Press Cylinder: 1 cylinder Guided tour: 4 column guides Clear width between the uprights: 1,250 mm Cylinder stroke: 600 mm Max. distance between heating plates: 800 mm Table height from the floor incl. damper plates and heating plate: 900 mm Total height approx.: 3, ...

1100T Servo Double Column Heating Press with Heating Plates We can offer you this press at a particularly low price, as the machine is already under construction and the original customer has withdrawn from the order for two identical machines. This makes it possible to purchase a high-quality servo-hydraulic double-column press with heating plates at attractive conditions and at comparatively short notice. The photos shown show similar, already built machines from the factory and serve as example pictures. Technical data + information: General information Press force: 1,100 t Type: Servo Double Column Heating Press Cylinder: 1 cylinder Guide: 4 column guides (Ø 150 mm) Clear width between the uprights: 1,600 mm Cylinder stroke: 600 mm Max. distance between heating plates: 800 mm Table height from the floor incl. damper plates and heating plate: 1,000 mm Total height  ...

pressure: 1500 kN chamfer lenght: 3550 mm distance between columns: 3044 mm Control: Cybelec 34 PS-CN column arm: 350 mm max. ram stroke: 220 mm dimensions of the machine ca.: 3200 x 4200 x 2100 m sheet support: hinten / back number of support arms: 2, verschiebbar / adjust. die shift: hydraulical tool clamping: upper tool quick change system: crown: 3 sets of tools included The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

For sale is a tested pressure vessel with a capacity of 900 liters. The container from the well-known manufacturer OKS is built in 2023 and has not yet been used. Due to the existing TÜV test, the container complies with the applicable regulations and is ideal for use in industry, trade or even in the hobby sector. Technical data: - Manufacturer: OKS Otto Klein GmbH - Year of construction: 2023 - Volume: 900 liters - Max. operating pressure: 11 bar - Test pressure: 16.5 bar - Temperature range: -10 °C to +80 °C - Medium: Air / Nitrogen - Corrosion surcharge: 0.5 mm - TÜV test available (04/2023) - Complies with Directive 2014/29/EU If you have any questions, please feel free to contact us at any time

pressure: 320 t chamfer lenght: 4000 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 25 t dimensions of the machine ca.: m Brand: LVD Type: PPEB 320/40 CNC brand: Morris CNC model: Solutions ESA 630 Year of make: 1990 Hydraulic Capacity: 320 T Bend length: 4.000 mm Multi V + J-knive Steered backstop X+R Incl. 1 Set of tools Machine weight: 25.000 kg Machine is flat on the ground The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Buhler DMWP flake mill, 1000x600, complete with electric motor

Whisper compressor Planet Air double piston; as good as new condition; double pistons; 8 bar; Boiler 50 liters. Whisper compressor Planet Air double poppet; condition as new; double poppet; 8 bar; tank 50 liters.

Differential pressure indicator, transmitter, monitor, sensor, differential pressure indicator, differential pressure switch -Manufacturer: Dürr -Part No.: 4Q 01 21 300 -Article No.: DE45E50040PKD232 -Basic measuring range: 0...10 kPa -Dimensions: 105/90/H70 mm -Weight: 0.3 kg

Line regulating valve, shut-off valve, ball shut-off valve, ball valve, ball valve, pressure relief valve -Manufacturer: Superior, pressure relief valve, unused original packaging -Type: 3220-360/360 PSI -Dimension box: 105/50/H50 mm -Weight: 0.3 kg

- Pressing force: 1500 kN - Pressure: 300 Mpa - Piston stroke: 300 mm - Downward speed: 9.8 mm/s - Working speed: 2.6 mm/s - Return speed: 13 mm/s - Passage: 1550 mm - Table dimensions: 1530 x 500 mm - Table height adjustment: 750 mm / 5 steps - Stop adjustment: 400 mm - Pressure stamp Ø: 2x 150 mm - Guide piston Ø: 70 mm - Motor power: 7.5 kW - Connection voltage: 400 V - Dimensions WxHxD: 2150 x 2050 x 1000 mm + 750 x 1100 x 750 mm - Weight: 1800 kg

Stop for press brake, bending machine, guillotine shear, drive shaft -Drive shafts: for stop, from press brake EHT type EHP 11-40, 2 pieces -Length: 515 mm -Hole: Ø 25 mm -Price: complete -Dimensions: Ø 50 x 515 mm -Weight 5.1 kg/pc.

Print roller, printer roller, spindle, anvil roller, pressure roller -Print roller: unfortunately no type designation -Technical dimensions: see photos -Dimensions: 295/100/H100 mm -Weight: 5.7 kg

- Pressing force: 1000 kN pressure: 289 bar - Piston stroke: 300 mm - Downward speed: 10.5 mm/s - Working speed: 2.7 mm/s - Return speed: 15 mm/s - Passage: 1050 mm - Table dimensions: 1030 x 460 mm - Table height adjustment: 600 mm / 5 steps - Stop adjustment: 400 mm - Pressure stamp Ø: 110 mm - Guide piston Ø: 60 mm - Motor power: 7.5 kW - Connection voltage: 400 V - Dimensions WxHxD: 2000 x 2150 x 900 mm - Weight: 1250 kg

Bending tool, die, upper knife, upper tool, straight tool, die tool, seam closing tool -Tool: for press brake, die tool -Measures: see drawing in the photos -Dimension: 3060/20 / H79 mm -Weight.: 30.3 kg

Bending tool, die, upper knife, upper tool, straight tool -Tool: split, for press brake -Tool angle: 90° -Drawing: in the photos -Dimension: 33 x 170 mm -Length: 1485 mm (1 x 855/630 mm each) -Weight: 44.6 kg

Pressure measuring device, flow measuring device, measuring and control technology, flow meter -Manufacturer: Brigon, accessories pressure measuring devices -Measuring liquid: green HDM -Measuring range: up to 30 mbar -Dimensions: 95/50/H385 mm -Weight: 0.6 kg

Skid similar but no Dynajet, Oertzen, Falch, DIBO, ... S500-30E-C - High pressure pump: Speck P52/30-500 30l/min. at 500bar (year of construction 12/16) - Motor: Electric 30kW - 400l water tank - Pressure gauge - Pressure regulator - Safety valve - Powder-coated steel frame - Aluminium covers - Forklift tabs - Dimensions with 400l water tank: approx. 1,250 x 1,510 x 1,260 - Empty weight: approx. 700 kg - Year of construction: 2009, new high-pressure pump12/2016 - Operating hours: approx. 1500 h

Pressure reducers, pressure regulators, bladder accumulators, high pressure bladder accumulators -Pressure accumulator: without type designation -Container: Ø 122 mm -Dimensions: Ø 122 x 200 mm -Weight: 2.7 kg

Bending tool, die, upper knife, upper tool, straight tool -Tool: split, for press brake -Tool angle: 90° -Drawing: in the photos -Dimension: 29 x 171 mm -Length: 1570 mm (1x 650/500/420 mm each) -Weight: 41.2 kg

Skid similar but no Dynajet, Oertzen, Falch, DIBO, ... S500-30E-C - High pressure pump: Falch xs31.1-30-500 30l/min. at 500bar (year of construction 01/08) - Motor: Electric 30kW - 1250l water tank - Pressure gauge - Pressure regulator - Safety valve - Powder-coated steel frame - Aluminium covers - Forklift tabs and crane eyelets - Dimensions with 1250l water tank: approx. 1,100 x 1,760 x 1,770 - Empty weight: approx. 1,500 kg - Year of construction: 2013 - Operating hours: approx. 1500 h

Pressure monitor, pressure switch, pressure limiter, gas pressure switch -Manufacturer: Kromschroder, gas pressure switch -Type: DG6UG-3 -Control range: 0.4-6 mbar -Pmax.: 600 mbar -Dimensions: 75/75/70 mm -Weight: 0.3 kg

Pressure monitor, pressure switch, pressure limiter, gas pressure switch -Manufacturer: Kromschroder, gas pressure switch -Type: DG50UG-6Z MIN -Control range: 2.5-50 mbar -Pmax.: 600 mbar -Dimensions: 115/75/70 mm -Weight: 0.3 kg

Polystyrene compressor Styropactor MAXI | Shredder press for Polystyrene EPS Compressor, combination of shredder and press for polystyrene EPS MAXI Commodity number: 42055 Throughput: Measured with fish crates of 25 KG/M3 Material space weight EPS: 70-90 kg/h Throughput measured in fish crates with lid (650 grams per piece and about 800x400x220mm): 100-120 Connection: 7.5kW, 3-phase 400V/50Hz 480V/60Hz Insertion opening: 600×1000 mm Length: 3180 mm Height: 1600 mm Width: 870 mm MAXI PLUS Commodity number: 42060 Throughput: Measured with fish crates of 25 KG/M3 Material space weight EPS: 110-130 kg/h Throughput measured in fish crates with lid (650 grams per piece and about 800x400x220mm): 170-200 boxes/h Connection: 11kW, 3-phase 400V/50Hz, 480V/60Hz Insertion opening: 600×1000 mm Length: 3680 mm Height: 1600 mm Width: 870 mm Wet boxes: YES Stainless stee ...

Pressure monitor, pressure switch, pressure limiter, gas pressure switch -Manufacturer: Kromschroder, gas pressure switch unused OVP -Type: DG10U-6T -Control range: 1-10 mbar -Pmax.: 600 mbar -Dimensions box: 75/75/70 mm -Weight: 0.4 kg

pressure difference sensor, pressure transmitter -Manufacturer: Johnson, pressure transmitter -Type: P499ACH-401C -Number: 2x sensor available -Price: per piece -Dimensions box: 105/45/H40 mm -Weight: 0.1 kg/piece