jones and shipman used for sale

Battery washer with heat pump, drain pump and rinse dosing unit Brand: Comenda Model: GE 605 RCD Year: 2013 Power supply: Three-phase 3P+N+T (380-400V - 50Hz) Capacity: 1 basket 650x700mm Dimensions (W x D x H): 830 x 900 x 2480 mm Weight: 200 kg Aesthetic appearance: Marked Used equipment sold as is, not refurbished and untested. Vesto reference: V2175 Auction-ID: A1-50906-177

concerns 6 boxes; consisting of cabinet660x450x1990mm; worktop wood 1320x445x23mm; case 660x450x875mm; wall cabinets 1320x330x405mm; tool rack 1320x660mmx10mm; tool storage with 4 drawers 660x450x885mm; with leveling feet: 5201 Auction-ID: A1-50866-77

Jumbo 17-plank (including 20-plank with horizontal planks) straight garden screen, made of planed, green impregnated spruce wood. The dimensions are 180 x 180 cm each, with a thickness of 15mm. Auction-ID: A1-45120-2197

Mobile slurry separator EYS SP600HD Demonstration/used machine Year of manufacture: 2023 Operating hours: 149 h Separator power: 5.5 kW Speed: 11.7 rpm Screen basket: Ø 258 mm Max. TS content: up to 40 % Progressing cavity pump 35-6LS, 5.5 kW Flow rate: 5.6–29 m³/h Mobile, height-adjustable frame with forklift pockets Stone Trap / Calming Tank Complete piping and tubing Control cabinet with frequency converter Pressure-dependent pump control Dry-running protection and thermal protection Dimensions frame: approx. 3000 x 1800 x 1250 mm Auction-ID: A1-50372-1140

Jumbo 17-plank (including 20-plank with horizontal planks) straight garden screen, made of planed, green impregnated spruce wood. The dimensions are 180 x 180 cm each, with a thickness of 15mm. Auction-ID: A1-45120-2196

consisting of: - Fiorini PHE K260 plate heat exchanger, year of construction 2005, s/n 051005S11892 - Rhoss ICAEB chiller - 3 stainless steel buffer tanks, with Siemens geared motor and control box with touch panel, all mounted on stainless steel frame - Lewa DA9 dosing device - Stainless steel heating tank, equipped with Fati electric heater, with stainless steel control box, mounted on stainless steel frame - Includes 7 different stainless steel liquid pumps - Complete with piping, gauges, valves up to the large stainless steel tanks - Includes 3 shut-off stations - To be dismantled by the buyer, on the instructions of the person in charge on site - Supply power cable including up to wall/ceiling mounting Auction-ID: A7-51083-12

Polar Mohr RA-2 Paper Jogger - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Polar Mohr RA-2 Paper Jogger Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers and Lifts Laminators Offset printing machinery Others Packaging machines Paper drills Perfect binders Pile turners Spare parts Stitching machines Polar Mohr RA-2 Paper Jogger Price: 10500 EUR Download PDF Polar Mohr RA-2 Paper Jogger The machine is 100% functional and in perfect condition. This is the latest model from the German manufacturer, currently in production. Technical specifications: Max. format: B2+ Stack height: 150 mm Weight: 450 kg Power supply: 400 V Air-expelling roller Air table Jogging capability (left/right) Adjustable tilt angle Adj ...

Polar Mohr RA-4 Jogger with Air-Removal Roller - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Polar Mohr RA-4 Jogger with Air-Removal Roller Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers and Lifts Laminators Offset printing machinery Others Packaging machines Paper drills Perfect binders Pile turners Spare parts Stitching machines Polar Mohr RA-4 Jogger with Air-Removal Roller Price: 14500 EUR Download PDF Polar Mohr RA-4 Jogger with Air-Removal Roller Machine in very good condition, ready for operation. This is the latest design from the German manufacturer. Technical specifications: Max. format: B1+ Pile height: 150 mm Weight: 550 kg Power supply: 400 V Air-removal roller with an additional reinfor ...

Polar Mohr LW 1000-4 paper stack lift - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Polar Mohr LW 1000-4 paper stack lift Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers and Lifts Laminators Offset printing machinery Others Packaging machines Paper drills Perfect binders Pile turners Spare parts Stitching machines Polar Mohr LW 1000-4 paper stack lift Price: 4500 EUR Download PDF Polar Mohr LW 1000-4 paper stack lift The unit is in excellent technical and visual condition. This is a currently manufactured model. Hydraulic drive. Power supply: 380V. Features an automatic lifting cycle controlled by a photocell, as well as a manual mode; high-speed operation. Load capacity: 1000 kg. Pallet dimensions: 1 ...

rate of flow: 250 l/min accumulator pressure: max. 8 bar range L-W-H: ca. mm Shipping weight: ca. 600 kg Packing: ca. m Osmosis System Complete water treatment system with dual softening, two IBC tanks, and control system, still installed, documentation available, viewing possible The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sanding line with working width 1300 mm, constant working height. Line consisting of: - Undersander 2 sanding units 1 x Combi unit with contact roller 60° shore and segmented shoe, motor 22 kW 1 x Segmented shoe, motor 15 kW 1 x Brush Vacuum workpiece suction, 7.5 kW motor -Intermediate transport: 4200 x 1300 mm -Top sander 2 sanding units 1 x Combi unit with 70° shore contact roller and segmented shoe, 22 kW motor 1 x Segmented shoe, motor 15 kW, 1 x Brush Vacuum workpiece suction, motor 7.5 kW Feed speed: infinitely variable Table spring-loaded or fixed adjustable

Top/bottom calibrating line: Bottom sander Number of sanding units: 4 1. Steel roller with motor 55 kW 2. Steel roller with motor 45 kW 3. Rubber roller with 90 Shore, motor 30 kW 4. Rubber roller with 90 Shore, motor 22 kW 5. Cleaning brush Variable Feed Speed Vacuum workpiece suction Top sander Number of sanding units: 4 1. Steel roller with motor 55 kW 2. Steel roller with motor 45 kW 3. Rubber roller with 90 Shore, motor 30 kW 4. Rubber roller with 90 Shore, motor 22 kW 5. Cleaning brush Variable Feed Speed Vacuum workpiece suction

1) sander top VEGA 311 MRL Sanding width 1100 mm. Working thickness 3 to 160 mm working height 950 mm Sanding belt dimensions 1120 x 2620 mm. Equipment: 1) cutterblock diameter 180 mm 22 kW 47m/s 2) rubber contact roller diameter 220 mm 22 kW 18m/s 3) combi roller/sanding shoe 12.5/16 kW 9/18m/s sanding belt blow off 4) Finishing brush unit at output 0.75 kW diameter 150 mm feed speed adjustable 2.5-13 m/min 3 kW pneumatic sanding belt tension motor height adjustment 0.75 kW extraction rate: 11800 m²/h 2) bottom sanderVEGA U 311 MRF Sanding width 1100 mm. Working thickness 3 to 160 mm working height 920 mm Sanding belt dimensions 1120 x 2620 mm. Equipment: 1) cutterblock diameter 180 mm 22 kW 47m/s 2) rubber contact roller diameter 220 mm 22 kW 18m/s 3) combi roller/sanding shoe 12.5/16 kW 9/18m/s sanding belt blow off 4) Finishing brush unit at output 0.75 kW diameter 150 mm feed speed ...

ROLLER COATER with SINGLE SPREADING-COATING ROLLER - Max working width mm 1300 - Lenght of the machine mm 1000 approx - Thickness of the panels (working height): mm 0 - 100 - Adjustable feeding speed: m/min 4 - 23 - Separate (from the machine s body) electric and command cabinet - Total installed power KW 2.4 - Equipped with: - 1°) Dosing unit (Chromium plated Doctor roller diam. mm 174), KW 0.37 - 2°) Coating unit (Rubbered spreading roller diam. mm 248) KW 0.75, with a rubbered bottom roller, counter-placed to the top one

Workpiece thickness: 8 - 50 mm Edge thickness: Coil edges 0.4 - 3 mm Feed speed 10 m/min Equipment: manual height adjustment. Joint milling unit, 2 motors Panel edge heating Gluing area Pressure zone 1 driven and 2 non-driven rollers End trims, 2 x 0,8 kW motors, straight and chamfer 15° Top and bottom trimming Profile scraping unit for PVC edging Glue scrapers

Panel thickness: 8 - 50 mm Thickness of the edges: 0,4- 3 mm Feed speed 8 - 11 m / min PU pressure rollers Equipment: Squaring unit, 2 motors 2,2 kW Panel edge heating Edge magazine for coil and strips Hot melt application with roller Airtec AT4510 unit The Airtec aggregate is positioned so you can use Airtec or the standard glue pot Motorized side pressure unit End trims, 2 motors, pneumatic positioning straight and with chamfer trimming unit above / below Contour trimming unit Profile scraping unit Glue scraping unit Polishing unit Detergent spray system central lubrication

Fixed side at the left Feedspeed 18 - 25 m/min Working width min 60mm for panel thickness 22mm, 105mm for panel thickness 40mm Panel overhang 30mm Panel thickness 8 - 60 mm in stead of 12 - 40 mm (with limitations) Coil edge thickness: 0,3 - 3 mm, strips 0,4 - 20 mm Coil diameter 830 mm Equipment: Sprayers release agent Squaring device with 2 motors each 3 kW Edge heating Edge magazine for 2 coils, guillotine for edges up to 3 mm Glueing part A20 with quickmelt application Lateral pressure zone K, 1 driven and 6 after pressing rollers End trims HL84, 2 motors each 0,8kW Rough trimming, 2 motors 1,5kW Contour trimming, 2 exchange units Profile scraping PN10 Flat scrapers FA11 Sprayers cleaning agent Buffing Automation package straight/chamfer: -Automatic adjustment infeed fence -Automatic setting of pressure rollers -Pneumatic setting of end trims -Pneumatic setting of rough trims -Automa ...

Single sided edge bander with hot melt, fixed side at the right, pre-milling unit Edge thickness: 0,4 to 12 mm Workpiece thickness: 8 - 60 mm Feedspeed 8-20 m/min (limited to 10 m/min using the contour trimming) Workpiece transport by chain, top pressures with rubber rollers Sound enclosure over all trimming motors Equipment: Adjustable fence Pre-milling with 2 shapers, each 2,2 kW Coil and strip magazine Hot melt unit, Quickmelt type Pressure zone with1 driven and 2 non-driven pneum. Loaded rollers End trims, 2 x 0,35 kW motors, straight and chamfer 15° Top/bottom trimming, motors 2 x 0,35 kW Radius trimmming Contour trimming unit, leading and following edge, 2 x 0,35 kW Radius scraping unit Glue scrapers Buffing unit Controlls PC 20+

Workpiece thickness: 8 - 90 mm, electronically adjustable Feed rate: 18-32 m/min frequency controlled Edge thickness: 0.3 - 3 mm for roll edges, strips up to 20 mm Equipment: Inlet guide automatically adjustable via the control, extension 500 mm Joint milling unit: 2 x 3.0 KW workpiece preheating Gluing unit A34 edging magazine for roll Pressure zone with 1 driven, 6 non-driven rollers, automatic adjustment from the control Cutting unit WK14, straight, 2 motors 0.8 kW Pre-milling unit: 2 x 1.5 KW, pneumatic adjustment Form milling unit FF 12 automatic, 2 motors 0.4 kW radius/phase milling unit FF12 automatic 4 motors 0.4 KW universal milling aggregate controlled UF11, 4 kW Profile scrapers PN20 Glue scrapers Nozzles for detergent and anti-stick Polishing unit Control: Power Control PC22

Fixed side at the left Feedspeed 18 - 25 m/min Working width min 60mm for panel thickness 22mm, 105mm for panel thickness 40mm Panel overhang 30mm Panel thickness 8 - 60 mm in stead of 12 - 40 mm (with limitations) Coil edge thickness: 0,3 - 3 mm, strips 0,4 - 20 mm Coil diameter 830 mm Equipment: Sprayers release agent Squaring device with 2 motors each 3 kW Edge heating Edge magazine for 2 coils, guillotine for edges up to 3 mm Glueing part A20 with quickmelt application Lateral pressure zone K, 1 driven and 6 after pressing rollers End trims HL84, 2 motors each 0,8kW Rough trimming, 2 motors 1,5kW Contour trimming, 2 exchange units Profile scraping PN10 Flat scrapers FA11 Sprayers cleaning agent Buffing Automation package straight/chamfer: -Automatic adjustment infeed fence -Automatic setting of pressure rollers -Pneumatic setting of end trims -Pneumatic setting of rough trims -Automa ...

Wolf Power Systems combined heat and power plant, type: GTK 50E08, year of construction: 2021, 400 VAC, 3 Ph, 50 Hz, electrical output: 50 kW, thermal output: 90 kW, power input (fuel input): 146 kW, fuel: Natural Gas H, gas connection pressure range: 25â€60 mbar, maximum operating pressure: 4 bar, maximum flow temperature: 90 °C. Never used, no operating hours. Dimensions plant: 2880 mm x 1020 mm x 2000 mm. Including s/s switch cabinet, dimensions: 1000 mm x 410 mm x 2000 mm.

BVT dough cutting, steaking, folding and forming line, consisting of: - Transport belt, plastic belt, belt width: 1350 mm with flour brush, dough steaker, knife to cut dough in half. - BVT forming machine for soufflé, type: MG1200, number: 33832, year of construction: 2022, total dimensions: 14000 mm x 2200 mm x 1460 mm. - Including 2 tool trolleys and large amount of parts and forms, trolley dimensions: 2050 mm x 800 mm x 1300 mm.

Tortilla forming and baking line, consisting of: - Mobile waterwheel with forming roll and transport belt, diameter form: 250 mm, plastic belt, belt width: 340 mm, total dimensions: 4000 mm x 400 mm x 1200 mm. _x000D_ - (2x) Robomotion automatic dough placer with ABB pick and place robot, name: Tortilla-Handhabung, type: Delta-Robotanlage, serial number: 212417002, year of construction: 2021, 400 V, 3 Ph, 50 Hz, 10 A, 7 kW, diameter picker: 250 mm, total dimensions Robomotion: 3000 mm x 1640 mm x 2930 mm._x000D_ - MCS srl oven, type: e-IMS 1 x 10m, serial number: XC00289-XLA.02139, year of construction: 2021, 400 V, 3 Ph, 50 Hz, 6000 A, baking time: 20 to 15 minutes, s/s mesh belt, belt width: 1000 mm, clearance: 1000 mm x 20 mm, total belt length: 10000 mm, total dimensions: 13000 mm x 2300 mm x 2900 mm. _x000D_ - Ecor Pro dehumidifier unit, model: DSR-12, serial number: 191000467, 220- ...

CPS product checking and box packaging machine consisting of: - Plastic transport belt, belt width: 400 mm - Ceia metal detector, model: THS/MS21, serial number: 21500248046, year of construction: 2015 - Mettler-Toledo Garvens GmbH checkweigher, type: XS3, fabrication number: 35006416, year of construction: 2015, 100-240 V, 50-60 Hz, weighing range: 240-3000g, maximum belt speed: 90m/min, capacity: 126 pcs/min, - Box weighing module - Box closing module

Odenberg steam peeler with steam accumulator and starch and peel separator, model steam peeler: Orbit 1000, 400 V, 3 Ph, 50 Hz, 4 kW, total volume: 1000 litres, nominal door diameter: 450 mm, peeling capacity: 12000-23000 kg/hour, dimensions: 7800 mm x 6800 mm x 5800 mm. Small hole detected in steam release vessel. Including steel switch cabinet, dimensions: 1100 mm x 400 mm x 2200 mm.

3 trestles equipped with lifting eyes with various scaffolding tubes and scaffolding planks Various lengths including 480 cm Auction-ID: A1-50660-739

With laptop stand, keyboard and mouse Auction-ID: A1-50660-922

With laptop stand, mat and mouse Auction-ID: A1-50660-924

Consisting of: various charging stations, charging stations semi-finished products, parts and charging cables. On approximately 8 pallets. Auction-ID: A1-50244-3

Mobile frame with computer in Rittal cabinet and 43 inch monitor. As well as keyboard and mouse Frame dimensions approx. 100x80x189 cm Auction-ID: A1-50660-633

Consisting of various items including: monitors, single-sided and a double-sided self-service kiosk, cables and more. Auction-ID: A1-50667-90

Serial Number: 2000 Auction-ID: A1-50244-10

batteries: 5x Pylontech FH48074 H1 3.55 kWh BMS: Pylontech FC0500-40S-B management solar panels: 20x Longi LR5-54HPB-410M (410 wp) Full Black inverter: Goodwe Hybrid Inverter 8K (3 phase) total power: 8,200 Wp power: 410 Wp per solar panel Condition: New Auction-ID: A1-46381-416

Composite installation equipped with: (1x) infeed/lifting system with stainless steel hopper, (1x) double plastic conveyor belts with transport and distribution sections, stainless steel platforms and support structures. (1x) Marel weighing/sorting system, Type: DWU, Serial number: A022216, Year of manufacture: 2003, 400V, 0.25 kW, with Intralox S100 conveyor belt, Belt width: 225 mm x Belt length: 3912m. Including: (2x) Marel MSeries 3000 - A520 control/weighing terminals, Serial numbers: A022306 and A022307, 24 V, IP67. (1x) Marel DIS-MASS, supply, transport, distribution and output sections, Serial number: A022231, Year of manufacture: 2003, 400V, 0.37 kW. As well as various electric motors, cabling and other visible accessories and accessories. Auction-ID: A1-51050-5

Mobile frame with computer in Rittal cabinet and 43 inch monitor. As well as keyboard and mouse Frame dimensions approx. 100x80x189 cm Auction-ID: A1-50660-651

Dimensions of pulling equipment 130x110x260 cm, meter cupboard 85x85x190 cm Auction-ID: A1-50656-147

Metal mobile frame with computer setup Dimensions approx. 75x75x190 cm Auction-ID: A1-50660-629

Maus automatic grinding machine, type: SAM 1200 , year of construction: 2008 v.v. 3-sided measuring device and accessories Auction-ID: A1-50656-25

Consisting of 6 span blocks size largest approx. 303x55x71 cm and 7 span plates (3 to 4 pieces) some of which are in steel trestles. Various dimensions of plates including approx. 300x65x4 cm Auction-ID: A1-50660-778

approximately 1000 allen bolts and 1000 stainless steel body rings Auction-ID: A1-46381-453

Maus automatic grinding machine, type: SAM 1200 , year of construction: 2008 v.v. 3-sided measuring device and accessories Auction-ID: A1-50656-26

Table (201x101x97cm) with vice, cabinet (90x45x200cm) with 2 doors and 4 shelves, no key available. The contents of the cabinet are not included. Auction-ID: A1-50660-656

Metal mobile frame with computer setup Dimensions approx. 75x75x190 cm Auction-ID: A1-50660-649

Including surveying wheel, Carbon tripod, clinker puller, bump bar and pestle, on 1x pallet, without the pallet Auction-ID: A1-50903-17

Dimensions H beams: 280 x 16 x 56 cm. Beam dimensions: 332 x 12 cm. Dimensions steel frame with wood: 348 x 144 cm. Auction-ID: A1-50660-753

- Includes: - Table with guide with total dimensions 2520 x 480 x 1100 mm. - Trolley: dimensions 800 x 650 x 1720 mm, arm length 370 mm, 4 swivel castors. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of disassembly and loading are those specified as additional costs. Auction-ID: A7-50834-610

Equipped with supply line length approx. 12 meters As well as canopy Auction-ID: A1-50660-800

Pallet not included. Decommissioned KNF Neuberger pump VDE 0530 LaboTech Retschmix TM01 Vortex Mixer Stnart Platform Rocker STR6 Laboratory Mixer Auction-ID: A1-50846-182

Consisting of tension block size approx. 250x50x54 cm and 13 parts with tension plates (3 to 4 pieces), some of which are in steel trestles. Various dimensions of plates including approx. 300x65x4 cm Auction-ID: A1-50660-775

Metal mobile frame with computer setup Dimensions approx. 75x75x190 cm Auction-ID: A1-50660-676