jones and shipman used for sale

Liquid filling and capping machine for vials and bottles Manufacturer: Bausch & Ströbel Type: KSF 1020 Year of Make: 1998 Stainless steel version, equipped for filling and capping vials/bottles 2 filling points for stable bottles, object Ø for round objects 16-100 mm, for flat objects 16 x 16 - 100 x 100 mm, H 35-310 mm, depending on the format set Capacity max. 3,000 objects/h depending on the product Filling range depending on the pumps 0.3-540 ml/bottle, with 2 successively installed stainless steel rotary lobe pumps per pump 8 - 50 ml Single filling (max. 50 ml) and stepped filling (max. 100 ml) possible with existing pumps Drip protection 1 transfer station for screw caps Ø 22.0 x 20.5 mm with screwing head and vibrating pot Format sets for bottle Ø 24.2 x H 63.7 mm, Ø 28.6 x H 71.5 mm, Ø 37.7 x H 92 mm 2 sets of filling needles, 2 pieces each, different di ...

Filling and Sealing Machine for Vials & Bottles Manufacturer: Bosch Type: VSR F01 Year of Make: 1988 Machine for filling, pressing in dropper inserts and capping with screw caps of vials and bottles (stable) Capacity max. 80 objects/min 6 filling stations with 6 rotary vane pumps for filling range 20-100 ml, other filling areas possible by purchasing new pumps 1 new replacement pump for filling range 20-100 ml Drip protection by suction Bottle feeding through infeed turntable Bottle drain through drain turntable Pressing station for drip insert Ø 12.2 x 19 mm with sorting pot Screwing station with pre-screwing and post-screwing for screw cap Ø 20.5 x 32 mm with sorting pot Vacuum pump Available bottle formats (all information without guarantee, no guarantee of completeness): Ø 24.2 x 63.3 mm (10 ml), Ø 29 x 74.2 mm (20 ml), Ø 32.2 x 83.8 mm (30 ml), Ø 35.4 x 7 ...

Optima complete production and packaging line for ELISA test kits, comprising the Optima MEDICON ImmuCoat coating system for the manufacture of 96-well microtitre plates for ELISA kits; operating principle and process steps: 1. Feeding and preparation: Microtitre plates are automatically retrieved from destackers and transferred to the transport system. 2. Deionisation: To eliminate static charges, the plates are deionised, which is crucial for uniform coating. 3. Coding: Each plate is assigned a unique serial number. 4. Coating: The system precisely dispenses the biological components (such as antibodies or proteins) into the wells of the 96-well plate (dispensing volume 0–500 µl per well, dispensing rate 0–30,000 µl/s per well), followed by automatic level verification (Level Verification Ultrasonic V2 Y with 8-channel ultrasonic sensor). 5. 2 (two) long-term incubators with a to ...

Lg.Nr. 26208 Technical data: - Center height 120 mm - Center width 450 mm - Largest circulation – Ø over bed 250 mm - Spindle bore 23 mm - Spindle mount with threaded nose DIN 55027 - Mounting cone of the tailstock quill MK 2 - 20 spindle speeds 60 - 3000 rpm - Feeds - longitudinal 0.03 - 3.0 mm - Flat 0.015 - 0.150 mm - Thread pitches 0.25 - 5 mm - Drive 400 V / 1.1 / 1.5 kW - Space requirement approx. W 1200 x H 1250 x D 650 mm - Weight approx. 700 kg - with: - 3-jaw chuck, - Quick-change steel holder - Moving grain tips - Separate tool cabinet with various accessories

bore capacity in steel (diameter): 40 mm throat: 250 mm bore stroke: 125 mm spindle taper: MK 4 spindle turning speed range: 50 - 2500 U/min : 550 mm : 230 mm table surface area: 820 x 240 mm connected load frequency: 400 V total power requirement: 0,8 kW weight of the machine ca.: 0,7 t dimensions of the machine ca.: 1,2 x 1,0 x 1,85 m Drilling and milling machine - Digital display - Clockwise/counter-clockwise rotation - 2 electric speed ranges - Drilling spindle with automatic feed and manual feed - Includes machine stand The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 320 mm turning diameter over slide rest: 180 mm turning length: 1000 mm turning diameter in the gap: 460 mm turning speeds: 70 -2000 U/min centre height: 160 mm spindle bore: 27 mm total power requirement: 2,0 KW weight of the machine ca.: 0,7 t dimensions of the machine ca.: 1,8 x 1,2 x 1,6 m Centre lathe (lead-screw and feed-rod lathe) - 160 mm 3-jaw chuck - Faceplate - Spare jaws - Quick-change tool post (base unit) - 3 tool holders - 2 steadies - Live centre - Chip tray The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 700 mm y-travel: 400 mm z-travel: 350 mm table-size: 920 x 300 mm control: konventionell tool adaptor: SK40 turning speed range: 40 - 2000 U/min quill stroke: 50 mm total power requirement: 2,4 kW weight of the machine ca.: 1,1 t dimensions: 1,4 x 1,6 x 2,1 m Equipment: - Heidenhain digital readout - Coolant system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 400 t distance between columns: 600 mm stroke: 600 mm table-size: 3000 x 1500 mm travel x / y: 2200 x 900 mm working feed: 7 mm/sec tank capacity: 66 l working pressure: 30-250 bar total power requirement: 18,5 kW weight of the machine ca.: 25 t dimensions of the machine ca.: 3500 x 3500 x 3700 m 2. STANDARD EQUIPMENT FRAME - Welded steel frame - Frame and plates are precision-milled using a CNC milling machine - Chrome-plated cylinder - Worktop with threaded holes HYDRAULICS - Bosch Rexroth hydraulic pump - Hydrapack or Badestons hydraulic directional control valve - Hydraulic block in accordance with EN standards - 1000-liter hydraulic oil tank - Pressure adjustment via pressure transmitter/regulator ELECTRICS - Control cabinet in accordance with EN standards - All cables are labeled and clearly arranged - All electrical components are from Siemens CONTROL PANEL - Stroke cont ...

Tube Filling & Sealing Machine (Plastic) Manufacturer: SpeMaBa/Gustav Obermeyer Type: TUFÜBA 40 PE Year of Make: 2006 • For plastic tubes (HDPL, LLDPL) • Welding by hot air • 9 tube holder stations • Capacity max. 40 tubes/min • For tube Ø 9-50 mm depending on tube holder format set • Tube height 60-240 mm • Dosage 20-220 ml depending on the dosing pump • 1 rotary vane dosing pump 10-100 ml (1 additional as a replacement) • Tube feed magazine • Filling funnel with agitator, heatable with heating/cooling unit • Print mark control (alignment of the tube to the printed image) • Embossing 1-line • 2 tube holder format sets: tube Ø 25 mm, tube length 90 mm, tube Ø 35, tube length 165 mm • PLC Siemens S7-300 • Connection 400V/50Hz • Has worked in line with upstream tube labeling machine 05-0179

Bottle formats: diameter approx. 20–40 mm, height approx. 45–70 mm, depending on the format set Capacity approx. 6000 bottles/h With format set for round bottle Ø 24 mm x length 52 mm Feeding hopper with lifting device Alignment for the correct positioning of the bottle on the conveyor belt (e.g. filling machine) 240V/50 Hz

Gentilin Clinic Dry 6/90 HS – Professional dental compressor with membrane dryer & sterile filter (YOC 2018) High-quality oil-free piston compressor of the Clinic Dry series from Gentilin (Italy). Model: CLINIC DRY 6/90 HS Serial number: DKHS69025 0001 /18 Technical data: • Power: 3 kW • Voltage: 400 V / 50 Hz / 6.5 A • Speed: 1,400 rpm • Max. operating pressure: 10 bar • Tank: 90 liters stainless steel (AISI 304) • Operating mode: S1 – 100% continuous operation • Weight: 89 kg • Equipment HS version: membrane dryer + sterile filter (0.01 μm) → very dry and germ-free compressed air • Hour meter: 339 hours (white) / 95 hours (red) – extremely little run! The compressor is fully operational and in very good condition. Ideal for dental practices, dental labs, CAD/CAM or medical applications where the highest air quality is required (suitable ...

WEILER COMMODOR L&Z lathe from school operation -Turning length 1000mm -Turning diameter max. 180mm Bar Passage 56mm -Speed range 56-2000 rpm (gearbox) -Automatic longitudinal/plane feeds - Thread: Metric/Inch/etc. -Tailstock Mk4 -Three-jaw chuck approx. 200mm -Multifix base holder with insert -Tailstock MK 4 -Coolant device -Electric lining protection -Work light -Swarf back wall -Guide and pull spindle cover -2x Emergency / Off -Machine documentation -Good operational condition Dimensions: LxWxH 2.5x1.3x1.7 meters / Weight 1500Kg

Lead and tension spindle lathe Weiler Matador -Center width: 500 mm -Tip height: 140 mm -Feed range longitudinally over belt: 0.05–0.40 mm/rev -Feed range longitudinally via interchangeable gears: 0.018–0.800 mm/rev - Spindle head: size 5 -Drive: three-phase motor -Speed range: 15–3,550 rpm -Coolant pump -Wedge bar chuck Forkardt F 160 -Quick-change holder Multifix -4 lathe chisel holders -Drill chuck -Moving centering tip Dimensions: LxWxH 1.5x0.6x1.2 meters / Weight 600Kg

AEG Double Grinding and Polishing Machine – Type DP 300/2200 -Operating voltage: 380 V -Motor power: 2.2 kW -Max. disc diameter: Ø 300 mm -Max. pane width: 50 mm -Polishing spindle speed: 1,400 rpm Dimensions: LxWxH 1.2x0.4x0.9 meters / Weight 180Kg

For sale is an original ROBEL track lift winch type 46.50 with 10 t lifting capacity. Professional, robust track lift winch for lifting and lowering heavy loads, especially for applications in track and railway construction. Technical data: Manufacturer: ROBEL Bahnbaumaschinen GmbH Type: 46.50 Serial No.: 46.50-00459 Ref. No.: 800 465 0001 Year of construction: 2019 Load capacity / SWL: 10,000 kg Maximum lifting height: 300 mm Excavation height: 80 mm Weight: approx. 46 kg Safety crank with load pressure brake and folding handle Robust design with reinforced base plate Made in Germany CE marking The winch is in good used condition with usual traces of use and storage. Suitable as a professional track hoisting winch as well as for corresponding heavy lifting applications in compliance with the respective application and safety specifications.  ...

used aseptic filling line SIG-COMBIBLOC, Type CFA 310-32, built in 2004. Capacity: 10,000 E/h Packaging type: C3, (1ltr. slim) Included: - Automatic unpacker and feeding of blanks - Closure applicator - Tray packer - Vertical buffer - Various conveyors - Control cabinets, etc. Dismantling by the buyer Location: EU country

turning diameter over bed: 330 mm turning diameter over slide rest: 195 mm turning length: 750 mm center height over bed: 160 mm centre distance: 650 mm digital readout: 3 Achsen HEIDENHAIN bed width: 205 mm spindle bore: 36 mm spindle taper: KK5 DIN 55027 turning speed range: 48 - 2500 U/min power requirement: 3,0 kW 4-jaw-chuck diameter: 160 mm quick change toolholder: MULTIFIX Typ A taper in tailstock-quill: MK 3 dia. of quill: 40 mm quill stroke: 100 mm voltage: 400 V total power requirement: 3,2 kW weight of the machine ca.: 680 kg dimensions of the machine ca.: 1,60 x 0,80 x 1,55 m - Serial-No.: 4432 - HEIDENHAIN 3-axis digital readout - MULTIFIX quick-change tool holder - Collet chuck including collets Ø 8 - Ø 27 mm - Face plate Ø 250 mm - Quick-action drill chuck - Center point The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 75 KW, 400 V

Buderus Gas CHP EN 70 Gas electricity and heat generator from 2011 with 50,524 operating hours. Closed unit with control unit and heat exchanger. 70 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: Leroy Somer LSA 44.2 S7/4P, 112 KVA Manufacturer: Buderus Model No.: EN 70 Type: Natural Gas CHP Serial Number: 207035 Power [KWel]: 70 Power [KWth]: 109 Engine: MAN E0836 E302 Engine power [KW]: 75 Year of Make: 2011 Hours: 50,524 Weight unit [kg]: 3,000 Dimensions LxWxH [m]: 3.40 x 0.90 x 1.90 AC Generator Leroy Somer LSA 44.2S7/4P Manufacturer: Leroy Somer Model: LSA 44.2S7 C 6S/4 Type: AC Synchronous Generator Serial number: 260460/6 Power [KVA]: 112 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 162 Speed [1/min]: 1,500 Year of Make: 2011 Weight [kg]: 440

Key data: 250 KW, 400 V

Viessmann Gas-CHP Vitobloc 200 EM 238-363 Natural gas electricity and heat generators from 2014, 67,631 operating hours, closed module. 238 KWel x 1,500 rpm, 400 V / 50 Hz. AC Generator: Leroy Somer LSA 46.2L9 C 6S/4, 280 KVA Manufacturer: Viessmann Model: Vitobloc 200 EM 238-363 Type: Natural Gas CHP Serial number: 7411152 3 02335 104 Power [KWel]: 238 Power [KWth]: 363 Engine: MAN E2842E312 Engine power [KW]: 250 Year of Make: 2014 Hours: 67,631 Weight unit [kg]: 4,000 Dimensions LxWxH [m]: 4.40 x 1.80 x 2.10 AC Generator Leroy Somer LSA 46.2L9 C 6S/4 Manufacturer: Leroy Somer Model: LSA 46.2L9 C 6S/4 Type: AC Synchronous Generator Serial Number: 304507/1 Power [KVA]: 280 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 404 Speed [1/min]: 1,500 Year of Make: 2014 Weight [kg]: 770

Krohne dosing system for smaller bulk containers 5-100 litres equipped with Krohne Oprtiflux 6300 and Burkert 3003 fluid control system. Mounted on trolley 600x1200x1000(height)

Heating: gas, 28kW, Burners: 14 pieces, Capacity: max 400 kg, Skewer size: max 700 mm diameter, Skewer height: max 1150 mm, Power: 220V, 50Hz, 1.5kW, Dimensions: 1200 x 1250 x 2350 mm

CONTROLS   CNC controls MITSUBISHI M720BM BASIC FUNCTIONS   number of spindles: 2   number of turrets: 1   live positions: yes   number of c-axes: 2 WORKING RANGE TURNING   swing diameter (max): 700 mm   turning diameter (max): 350 mm MAIN SPINDLE   spindle revolutions (max): 4000 /min   spindle bore diameter: 90 mm   c-axis: yes X/Z SLIDE   - rotation speeds (max): 6000 /min TOOL MAGAZINE   number of positions: 24 ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   total weight approx.: 7500 kg ATTACHMENTS (TURNING)   chip conveyor: yes   coolant unit: yes   hydraulic system: yes   European CE standards: yes Machine in a good condition The spindle guides need to be replaced. Machine equipment (1500.- CHF (below)): - 1x double face and longitudinal turning tool holder - 3x face and longitudinal turnin ...

We sell a winding and pulling machine for electric motors. The system has three winding stations, a pulling station and an intermediate molding machine. Since an electronic card is defective, the machine is only partially functional at the moment. The facility is in good condition.

Four CNC PCB drilling and routing machines are available. 1) Pluritec Multistation V3 CNC PCB drilling and routing machine, year of manufacture: 1998. 2) Lenz G650-4 CNC PCB drilling and routing machine, year of manufacture: 2001. 3) Lenz GX-460/2 CNC PCB drilling and routing machine, year of manufacture: 1991. 4) Lenz DLG 550-2 AL CNC PCB drilling and routing machine, year of manufacture: 2002. The machines come from the drilling department of a PCB manufacturing facility. An on-site inspection is possible.

wheel diameter: 300 mm grinding wheel width: 50 mm no. of working stations: 2 Stück turning speed range - stepless: 1.450 / 2.900 U/min voltage: 400 V total power requirement: 1,6 / 22 kW weight of the machine ca.: 130 kg dimensions of the machine ca.: 1,10 x 0,50 x 1,30 m ! ATTENTION ! EXCELLENT CONDITION ! This machine comes from a vocational school! - Serial No.: 090520004 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Steel plate and chain belt conveyor belt Manufacturer: FMW Förderanlagen GmbH Year of construction: approx. 2019 Total length approx. 45,000 mm Width: approx. 2000 mm For sale here is a steel plate and chain belt conveyor belt with a total length of approx. 45 m and a width of approx. 2 m. For exact data, please refer to the drawing. The conveyor belt is currently still set up and can be visited on request. Disassembly is not included in the price.

Filling and sealing machine for pre-filled syringes Manufacturer: Rota Type: RSM 05 Year of manufacture: 2018 Exhibition machine Incl. 12 months warranty and FAT at the manufacturer's factory Test run and inspection possible by arrangement at the manufacturer's plant. Option: In addition to pre-filled syringes, cartridges can also be processed on this machine. This requires additional format parts as well as the mechanical and electrical retrofitting of an additional station. Download Layout: 04-J010_Layout Download Technical Overview: 04-J010_RSM05_Technical_Overview Download Technical Data: 04-J010_RSM05_Technical_Data_01.06.2026 Subject to technical changes

turning diameter over bed: 280 mm turning diameter over slide rest: 150 mm turning length: 500 mm center height over bed: 140 mm centre distance: 500 mm bed width: 205 mm spindle bore: 40 mm turning speed range - stepless: 30 - 4.000 U/min 3-jaw-chuck diameter: 140 mm quick change toolholder: MULTIFIX Typ A drive capacity - spindle motor: 4,0 kW taper in tailstock-quill: MK 3 dia. of quill: 40 mm quill stroke: 85 mm voltage: 400 V total power requirement: 7,5 kW weight of the machine ca.: 800 kg dimensions of the machine ca.: 1,40 x 0,95 x 1,55 m - Serial-No.: 154 - SIEMENS 3-axis digital display - MULTIFIX quick-change tool holder - rotating centering tip The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 280 mm turning diameter over slide rest: 170 mm turning length: 650 mm center height over bed: 140 mm centre distance: 650 mm bed width: 155 mm spindle taper: KK 4 CAMLOCK DIN 55029 spindle bore: 40 mm turning speed range - stepless: 4.000 U/min 4-jaw-chuck diameter: 140 mm quick change toolholder: MULTIFIX Typ A drive capacity - spindle motor: 7,5 kW taper in tailstock-quill: MK 2 dia. of quill: 30 mm quill stroke: 80 mm voltage: 400 V total power requirement: 7,5 kW weight of the machine ca.: 400 kg dimensions of the machine ca.: 1,30 x 0,70 x 1,60 m - Serial-No.: C7D W13 02 - 3-axis digital display - Stepless speed adjustment - Digital speed display - MULTIFIX quick-change tool holder The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2025 : 010105 : prompt, Zwischenverkauf v : Bulgarien : 50210 € : 863.32 € : 1 : 45200 € : 600 mm : 2000 mm : 300 mm : 80 mm : 400 mm : 400 mm : 8 : 90 MK : 21 : 20 - 2000 1/min : 120 : 0.04 - 12 mm/U : 0.02 - 6 mm/U : 64 : 0.5 - 120 mm : 60 - 1/4 Gänge/ : 0.125 - 30 : 315 mm : 130 mm : 90 mm : 5 MK : 230 mm : 7.5 kW : 3600 mm : 1250 mm : 1400 mm : 3110 kg driven by conventional gearbox 3-axes digital readout Fagor 40i quick change toolpostAmestra Multisuisse type C with 4 holders (3 square, 1 round) 3-jaw chuck Bison3204/DIN6350, Ø 250 mm spindle dead center four way rapid traverse device electromagnetic brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine accordin ...

Nipping and Smashing Kolbus FM 405 - AB 370 Falz- und Buchblockpresse / Nipping and Smashing Kolbus FM 405 - AB 370 Buchblockfalz- und Ganzpresse mit Buchblockanleger Book Block Joint and whole Block Press with Book block feeder Baujahr / Year 1988 - Serial-No. 308 Format (unbeschnitten) / Size (uncut) min. 125 x 100 x 6mm - max. 380 x 290 x 80mm Sehr guter Zustand / Very good Condition Maschinengewicht / Machine weight 4200kg

Die PräForm ist eine Maschine zum Einpressen von Büchern nach dem Einhängen und dem gleichzeitigem Einbrennen des Falzes. The PräForm is a machine to press books after casing-in, setting the joint at the same time and processes single books just as well as series of books.  Anpapp-Presse und Falzeinbrennmaschine Schmedt PräForm HHS 2100 Case Press and Joint-Setting machine Schmedt PräForm HHS 2100 Baujahr / Year 03/2002 - Serial-Nr. 77 Buchhöhe / Book height: 100 - 520mm Buchbreite / Block width: 120 - 400mm Blockstärke / Block tickness:: 8 - 100mm Leistung / Output: ca. 150 St/h Pressluftanschluss / Air supply: 6bar Elektrischer Anschluss / Power supply: 230V / 50Hz / 2.0kW

Description Item #8985 - FLAVOUR COATING AND SEASONING LINE FOR EXTRUDED SNACKFOOD / BREAKFAST CEREAL PRODUCTS Manufactured by SCHAAF All from Year 2018. Line includes : TYPE 318 COATING DRUM 1600 For the application of various taste and aroma giving materials by using various aromatising techniques. The special drum profile offers the following main advantages: - optimal Rolling of the product for uniform coating - minimum possible friction/damage of the product surface - no hidden corners, easy to clean, bacteriologically optimal surface. Adjustable drum speed, by frequency controlled AC gear motor 1.5 kW. Drum diameter: 1600 mm Drum length: 4000 mm Drum height: 3270 mm. TYPE 282 DRUM DRIER/ROASTER 1600 PTFE, Newly developed short and medium range infrared roaster for special thermal post treatment of expanded extrudate. The whole drum is coated with a low-wear PTFE layer. This ensures ...

Turning diameter over face slide: 200 mm Spindle bore: 32 mm Circumferential diameter over bed slide: 315 mm Tip width: 600 mm Turning length: 560 mm Quill stroke: 140 mm Total weight: 1,750 kg Digital display Heidenhain Collet System E163

Drehschieber-Druck-/Vakuumpumpen, trockenlaufend / Rotary vane pressure/vacuum pumps, oil-free Druck- & Vakuumpumpe / Pressure & Cacuum Pump Becker DVT 3.100 Baujahr / Year 2013 - Serial-No. D 2760035 Volumenstrom 50 Hz / Volume flow 50 Hz 103 m³/h Leistung 50 Hz  /Power 50 Hz 5,5 kW Schallpegel 50 Hz / Noise Level 50 Hz    76…77 dB(A) Gewicht / Weight +/- 95kgs

Weeke ABD 150 Drill and dowel inserting machining center manufacturer: Weeke Type: ABD150 Year: 2013 Mach.Nr.: 0-253-05-5352 Production hours: Desctription: CNC-controlled drill- and dowel automat for production of furniture and such Workpiece dimensions: X-ax 20 – 1.250 mm Y-ax: 100 – 800 mm Z-ax: 10 – 60 mm Center positioning fence: max. 600 mm Workfield: 1.250 mm Positioning: X-as AC -servo drivesystem via tooth bar Y-as: manual setting X-as: manual setting Positioning stops: Table support with rear- and sideward stoppers 6 workpiece supports manual positioning over full machine width, with scale Pneumatisch controlled center fence via manual control button 5 top clamps, manual positioning Vacuum clamps for sensitive panel surface 10 vacüumcups (115140100 mm) manual position over full machine width 2 vacüumcups (12575100 mm) manual positioning over full machine width 1 externa ...

Foil wrapping machine which can be used for packing products butter, lard, margarine, tvorog or cottage cheese into aluminium foil or parchment paper. The machine is equipped with 2 format sets: 200 and 250 gram, 100 x 55 x ± 40 mm and 100 x 75 x ± 35 mm, both bottom folded. The butter is feed with direct connection with compensator. Aluminium dosing station. Automatic greasing system. The machine is fully rebuild / reconditioned by Benhil - Germany in 2006 and has stainless steel and polycarbonate covers around the machine, with CE logo on the side., Excluding:, - Outfeed conveyor, Type of Machine: Butter packaging machine , Capacity: ± 1.000 Kg/h, Capacity (Units): up to 80 packages per minute, Packaging Weight: 200 and 250 gram, Brick size: 100 x 55 x ± 40 mm and 100 x 75 x ± 37 mm, Packaging type: Bottom folded, Year of refurbishing: 2006, Motor power: 3 kW, Weight: 2.160 kg

bore capacity in steel (diameter): 35 mm x-travel: 450 mm y-travel: 250 mm z-travel: 500 mm digital: ja Dimensions (L/W/H): 1,2 / 1,1 / 1,95. mm thread dia.: 24 mm weight of the machine ca.: 800 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The filtered air regulator provides clean, dry air, preventing damage to air tools, spray guns, and pneumatic equipment. Auction-ID: A7-50066-231

The filtered air regulator provides clean, dry air, preventing damage to air tools, spray guns, and pneumatic equipment. Auction-ID: A7-50066-131

The filtered air regulator provides clean, dry air, preventing damage to air tools, spray guns, and pneumatic equipment. Auction-ID: A7-50066-31

Offered is a combined Weinig/Alfred Harbs planing and profiling line for woodworking. 1) Weinig Unimat 23 E planer/moulder, year of manufacture: 1996, operating voltage: 3x380V/50Hz, control voltage: 230V/50Hz and 24V DC, rated current: 78A, main fuse: 80A, power: 34kW. 2) Weinig Uniplan fine finish/hydro planer, year of manufacture: 1996, operating voltage: 3x380V/50Hz, control voltage: 230V/50Hz and 24V DC, rated current: 42A, main fuse: 50A, power: 17kW. 3) Weinig UC 10, year of manufacture: 1996. 4) Alfred Harbs K6V, year of manufacture: 1992. Including additional associated components and transport equipment. An on-site inspection is possible.

The machine is equipped with a tailstock, a Multifix clamping system and a 3-jaw chuck, diameter: 300 mm, incl. two steady rests. Year of Manufacturing: presumable 2018

The machine is equipped with a tool holder, a tailstock, and a 3-jaw chuck, diameter: approx. 310 mm. • centre distance over bed: 300 mm • centre distance over support: 200 mm

Includes a 3-jaw chuck, jaw width: 250 mm, tailstock, Multifix basic holder as well as a 3-axis digital readout and a workbench with matching Multifix tool holders and two jaw chucks, indexable inserts, collets, and milling cutters. Additional technical specifications: • Center height over bed: 200 mm • Center height over support: approx. 110 mm • Center height over cross support: approx. 90 mm

• centre length: 1000 mm • centre height over bed: approx. 250 mm • centre height over support: 150 mm • Incl. steady rest.

The machine is equipped with a tailstock, a Multifix tool post, and a quick-action chuck, including a 3-axis digital readout system manufactured by FAGOR.

The machine is equipped with a tailstock, a Multifix clamping system and a 3-jaw chuck, diameter: 300 mm, incl. two steady rests. Year of manufacturing: presumable 2018

pressure: 10 t stroke: 380 mm table-size: 800 x 700 mm working speed:: mm/ sec. return speed: mm/sec work height max.: mm total power requirement: 4,0 kW : 90 mm weight: 2,5 t dimensions: 2,2 x 1,4 x 1,6 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2026 : 090222 : prompt, Zwischenverkauf v : Spanien : 15800 € : 303.36 € : 1 : 1 : 50 to : 177 mm : 5 : 1 : 31 x 12 mm : 34 1/min : 350 x 15 mm : 80 x 8 mm : 35 / 30 mm : 10 mm : 100 x 10 mm : 3 kW : 1300 mm : 1100 mm : 1850 mm : 950 kg with bending station capacity 50 to 5 working stations flat steel shear with device to reduce deformation 350 x 10 mm with adjustment 2° 350 x 15 mm with adjustment 5° angle iron shear 80 x 8 mm with round- and squarebars opening 35/30 mm recangular notcher 90 x 42 x 10 mm punching station 31 x 12 mm press brake device for flat steel max. 100 x 10 mm table at flat steel station table at notching station manual backgauge with electric contact 2 dies V40 and V70 gap at punching station 177 mm vertical movement of all stations (nor radial) hydraulic drive 1 foot release user manual in GERMAN and ENGLISH WE HAVE MORE THAN 700 REFERENCES! The da ...