jones and shipman used for sale

Key data: 250 KW, 400 V

SES Gas CHP HPC 250 N Natural gas electricity and heat generator from 2015, unknown operating hours, closed module with pump station. 1 available 239 KWel x 1,500 rpm, 400 V / 50 Hz. AC Generator: Leroy Somer LSA 46.2VL12 C 6/4, 315 KVA Manufacturer: SES Model: HPC 250 N Type: Natural Gas CHP Serial Number: P15024 Power [KWel]: 239 Power [KWth]: 365 Engine: MAN E2842E312 Engine power [KW]: 250 Year of Make: 2015 Operating hours: unknown Weight unit [kg]: 4,000 Dimensions LxWxH [m]: 4.50 x 1.85 x 2.45 AC Generator Leroy Somer LSA 46.2VL12 C 6/4 Manufacturer: Leroy Somer Model: LSA 46.2VL12 C 6/4 Type: AC Synchronous Generator Serial Number: 323575/1 Power [KVA]: 315 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 455 Speed [1/min]: 1,500 Year of Make: 2015 Weight [kg]: 885

Key data: 255 KW, 400 V

MTU Gas CHP 12V400 GS Natural gas electricity and heat generators from 2015, unknown operating hours, Engine with AC generator, heat exchanger and controller. 245 KWel x 1,500 rpm, 400 V / 50 Hz. AC Generator: Leroy Somer LSAC 47.2S5 C 6S5 C 6S/4, 405 KVA Manufacturer: MTU Model: 12V400 GS Type: Natural Gas Electricity and Heat Generator Serial Number: 94040700014 Power [KWel]: 245 Engine: MTU ED3042D4 Engine power [KW]: 255 Engine Serial Number: 0807-07-15 Year of Make: 2015 Operating hours: unknown Weight unit [kg]: 4,500 Dimensions LxWxH [m]: 3.60 x 2.00 x 2.40 AC Generator Leroy Somer LSAC 47.2S5 C 6S/4 Manufacturer: Leroy Somer Model: LSAC 47.2S5 C 6S/4 Type: AC Synchronous Generator Serial Number: 324562/1 Power [KVA]: 405 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 585 Speed [1/min]: 1,500 Year of Make: 2015 Weight [kg]: 1.186

Gannomat Index 230 Trend Type: 470 Year of Make: 2005 CE CNC-controlled automatic drilling and insertion machine For the fully automatic drilling, gluing and insertion of dowels in woodworking. Working length 2300 mm, Workpiece length unlimited because it is open at the sides 4 stations drilling, doweling, glue Height adjustable from 10 – 37 mm with vibrating pot for dowels Single or multi-field operation Operation via screen Machine has been serviced every year and is in a in good working condition.

Automatic sawing, drilling and feeding machine Koch Type: SBD-B Year of Make: 1989 double-sided Working width 280 mm – 2500 mm for dowel diameters 8 and 10 mm right and left respectively: Saw, drill head with 3 drill bits spacing 20 / 25 mm, Dowel insertion for 3 dowels each also 3 drilling units from above and rear 2 drilling units from above with 3 vibrating pots for dowels Fault detection display Schleicher Elektronik Width adjustment via rotary switch Center crossbeam available for long parts Material transport by webbing Return conveyor belt at the bottom Dowels 10 mm in diameter, 40 mm long well-functioning condition

Vacuum Filling Machine Handtmann VF 50 Main characteristics: • Designed for automatic dosing, twisting and filling of various mixtures under vacuum • The portioning is precise and varies from 5 to 10000 grams \ • The machine is made of solid stainless steel construction • Equipped with microcomputer control • Productivity: 2600 kg. / hour • Pressure: 55 bar • Power: 4 kW • Dimensions: approx. 1200 /800 /800 mm. • Weight: approx. 450 kg. • 1 year warranty

Vacuum Filler HANDTMANN VF 80 The machine can be used for Portioning, Dosing and Twisting. It is completely factory renovated by MM SERVICE EOOD, with 1 year warranty, delivery, installation, samples and training.

x-travel: 500 mm y-travel: 300 mm z-travel: 380 mm table surface area: 800 x 420 mm table load capacity: 400 kg tool taper: ISO 40 spindle turning speed range: 40 - 2000 U/min feeds longditudinal/cross/vertical: 10 - 500 mm/min rapid traverse: 1500 mm/min main drive: 3 kW weight of the machine ca.: 1,3 t dimensions of the machine ca.: m 3-axis digital readout (Heidenhain) Adjustable vertical milling head with quill adjustment Additional horizontal spindle REPAR 2 safety device (www.repar2.com) Machine light Anti-vibration mounts The machine is sold without a vise or tooling. Transport dimensions: The machine is loaded onto a heavy-duty pallet, Dimensions: 1800 x 1100 x 2100 mm (length x width x height) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Shell-and-tube heat exchanger stainless steel Manufacturer: SPIRAX SARCO Fabr. No. 3640 Jackets and tubes made of 1.4571 Power 600 kW 7,400 litres of water from 10 °C to 80 °C at 8 bar saturated steam and 90 °C condensate temperature Pipe length 2.45 m, total length 2.60 m, diameter 18 cm Around the tubes: Pressure 13 bar Operating temperature 200 °C Capacity 33 litres In the tubes: Pressure 10 bar Operating temperature 120 °C Capacity 18 litres Product page both DN 40 flange Most Fabulous DN 50/DN 25 Flange

Manufacturer: SURFIN Year 2020 Condition Used Stock number 9377 Air capacity: 26000 m³/h Internal dimensions of the machine (LxWxH): 6000 x 4000 x 2800 mm Drying up to 60 °C, Electrical connection: 24 kW, Including E1 – air supply and E2 – exhaust air; E3 – Exhaust gas discharge optional by arrangement.

– 240 liters funnel – Designed for automatic dosing, twisting and filling of various mixtures under a vacuum – Portioning is precise and varies from 5 to 10000 grams – The machine is made of solid stainless steel construction and has a built-in large rotor head – It is equipped with microcomputer control for memorizing about 80 user programs – Productivity: 3000 kg. / hour – Pressure: 55 bar – Power: 5.5 kW

The machine is designed for portioning and dosing. Completely stainless steel. New micro-process control with workflow setup. It has its own lifting device for 200 liters of strollers. Technical specifications: Funnel with a capacity of 300 liters Productivity: up to 10000 kg. / time Portioning speed: up to 500 g. in min. Portion weight from 5 to 100000 g. Power: 11 kW Weight: 1353 / 1638 kg . Machine dimensions : 97 / 90 / Height. 200 cm. Dimensions with lift - length: 170 cm., width 133 cm. Lifting turning height: 285 cm.

Description - TERSA planer blade system enables particularly quiet operation. - Helical toothed steel feed roller for constant and uniform material intake - Two-speed material feed - Numerical display for thickness table height - The 2,000 mm long dressing tables enable easy dressing of large workpieces. - Work tables are made of grey cast iron, post-annealed and stress-free, making them insensitive and permanently flat - Sturdy large aluminium dressing stop with round bar guide (1200 x 160 mm) - Thickness table adjustment via handwheel with numerical display for the planing height - The high machine weight ensures maximum precision and smooth running - Powerful industrial motor - Robust steel/cast iron construction Technical data Dimensions and weights Length (product) approx. 2000mm Width/depth (product) approx. 1110mm Height (product) approx. 1115mm Weight (net) app ...

Description - With TERSA knife shaft for razor blade changes in seconds - TERSA planer blade system enables particularly quiet running - Helical toothed steel feed roller for constant and even wood feed - The particularly long dressing tables made of one piece enable easy dressing of the workpieces - Large dressing stop can stay in place when opening the dressing tables - Rear-opening dressing tables - The high machine weight ensures maximum precision and smooth running - Powerful industrial motor - Robust steel/cast iron constructionWork tables made of grey cast iron, after-annealed and stress-free, therefore insensitive and permanently flat - Table lips for quiet running Technical data Dimensions and weights Length (product) approx. 1725mm Width/depth (product) approx. 880mm Weight (net) approx. 270kg Dressing Total length of tables 1500mm Working height900mm Chip ...

Hermerding Type PPD/60/60 Compressive force 60 ton Lifting height 10-80 mm Installation height approx. 450 mm Table 600 mm x 500 mm Stroke rate approx50 -1/min

ELB Brilliant-Future 20 CNC Surface & Profile Grinding Machine Manufacturer: ELB-Schliff (Germany) Model: Brilliant-Future 20 CNC Serial No.: 430090398 Country of Manufacture: Germany A high-precision German-made CNC surface and profile grinding machine equipped with automatic dressing system. ELB Brilliant-Future machines are designed for precision grinding applications requiring high accuracy and excellent surface finish. Specifications: Table size: 460 × 2440 mm Control: CNC Automatic wheel dresser: Included Machine type: CNC Surface / Profile Grinder Grinding applications: Tool & die manufacturing Mold production Precision mechanical components General high-accuracy grinding operations Features: CNC-controlled grinding operation Automatic grinding wheel dressing German precision engineering Suitable for long workpieces requiring  ...

Combined heat and power plant (CHP) for natural gas operation Manufacturer: Viessmann Year of Make: 2017 Operating hours: 22,334 h Plant starts: 2580 Electrical power: 8.5 kW Thermal power: 20.1 kW Energy input H: 30.1 kW Electrical self-consumption max.: 0.15 kW Flow temperature min./max.: 50/85 °C Return temperature min./max.: 30/65 °C Permissible operating pressure: 1 MPa (10 bar) Condition and availability: The CHP unit is in a well-maintained condition and is immediately available. This system is particularly suitable for economical and self-sufficient heat and power supply in small to medium-sized applications.

Six identical Demsan fabric doubling and winding machines are offered. Max. fabric width: 2000mm, fabric infeed: from roll and in open width, fabric delivery book/roll: 1000mm, double folded, max. operating speed: 60m/min, operating direction: forward, control: Hitech touch panel. Machine dimensions X/Y/Z: 4000mm/3100mm/2600mm, weight: approx. 2390kg. Equipped with fabric tension control, electronic length measuring system with encoder, calibration function, RS-232 interface, end-of-fabric photocell, photocell-controlled fabric catcher and centering system, dancer roller mechanism, Argox thermal printer, photocell-controlled edge guiding system, motorized fabric guide adjustment, AC geared motors, frequency converters and pneumatic opening unit. Four machines were manufactured in 2017, and two machines were manufactured in 2016. Documentation available. Inspection possible by arrangement ...

A Roland printer/cutter is offered. Max. printing and cutting width: 1346mm, min./max. media width: 275mm/1371mm, max. media thickness for printing: 1.0mm, max. media thickness for cutting: 0.4mm, without liner: 0.22mm, max. cutting speed: 300mm/s, ink configuration: CMYK, blade force: 30-500gf, max. roll outside diameter: 210mm, max. roll weight: 30kg, core diameter: 50.8mm/76.2mm, max. print resolution: 900dpi, ink capacity: 500ml, weight: approx. 178kg. Inspection by prior arrangement is possible.

: neu : ca. 4 Monate ab Auftragse : Bulgarien : 46970 € : 897.13 € : 500 mm : 1500 mm : 250 mm : 80 mm : 300 mm : 400 mm : 8 : 80 MK : 21 : 20-2000 1/min : 120 : 0.04 - 12 mm/U : 0.02 - 6 mm/U : 64 : 0.5 - 120 mm : 60 - 1/4 Gänge/ : 0.125 - 30 : 240 - 1 : 315 mm : 130 mm : 90 mm : 5 MK : 230 mm : 7.5 kW : 3100 mm : 1250 mm : 1400 mm : 2820 kg driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 250 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS: turning length1.000 mm € 45610,00 turning length2.000 mm  ...

Key data: 772 KW, 400 V

MTU CHP 8V4000 L63 incl. exhaust gas heat exchanger, table cooler and control cabinets (see pictures) Type: AE8V4000L63 Weight: 9000 kg Heating water pressure max.: 16 bar Electrical power: 772 kW Thermal power: 800 kW Heating water temperature inlet/outlet: 60/90°C Rated Power Factor: 0.8 cos φ Nominal voltage: 400 V Nominal frequency: 50 Hz Operating hours: 64380 h (as of July 30, 2026) Starts: 1773 (as of July 30, 2026) NOx sensor with monitoring Condition: The machine is currently in operation and in very good condition according to its age. Year of manufacture/operating hours: The CHP plant was built in 2008. In 2016, the engine was replaced and has since run for about 64,400 operating hours. Disassembly: We will drain the water and oil, unlock the machine and disconnect it from the pipes. The dismantling and application is carried out by the buyer. Maintena ...

Manufactured in Germany Plate volume 45 liters; Set with plexiglass noise-canceling cover. Power 9/ 11 KW. The machine is completely factory renovated by MM SERVICE , with 1 year warranty and delivery, installation, samples and training included in the price.

The machine is completely factory renewed; • 1 year warranty; • Delivery, installation, samples and training are included in the price.

Cutter LASKA KR – 60 liters Manufacturer: Austria Power: 16.4 kW The machine is available has been completely factory refurbished and is with a 1-year full warranty. The price includes delivery, installation, samples and training.

: neu : Bulgarien : 128710 € : 2432.62 € : 1320 mm : 3000 mm : 625 mm : 155 mm : 940 mm : 700 mm : 15 : 160 MK : 5 - 1000 : 160 : 0.032 - 38.9 mm/U : 0.016 - 19.45 mm/U : 0.5 - 480 mm : 60 - 1/16 Gänge/ : 0.125 - 120 : 685 mm : 270 mm : 125 mm : 6 MK : 260 mm : 8550 kg driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS: turning length1.500 mm € 113860,00 turning length 2.000 mm € 118510,00 turning length4.000 mm € 137250,00 turning length ...

Cutter K+G Wetter – 90 liters, set with emptying device Power supply: 400 V, 3 phases, 50 Hz Power: 34 kW Current: 70 A Material: -stainless steel Volume: 90 liters Dimensions: 1300 mm x 1900 mm x 1650 mm The machine is available after it has been completely factory refurbished and with a 1-year warranty. The price includes delivery, installation, samples and training.

Cutter ROBOT COUPE – universal vertical cutter with tilt and automatic emptying Volume: 30 liters; Power: 5400 watts; Power supply: 400 volts; Frequency: 50 hertz; Power: 3 horsepower; Overall external dimensions: 740 mm × 550 mm × 1230 mm;

A valve for regulating the flow and pressure of a hydraulic system. Model A: max flow rate of 60l/min, factory set pressure at 140 bar. The set pressure can be increased up to 220 bar.

Slice Cutter – Machine for cutting slices of 10 mm The total number of discs is: 32 knives. The machine is available after a complete factory renovation and 1 year full warranty with delivery, installation, samples and training

Hydraulic Flow and Pressure Control Valve14 Model B: max flow rate of 114 l/min, pressure set at the factory at 140 bar. The set pressure can be increased up to 220 bar.

Banderolierer Akebono OB 301 N; cleaned and tested; Large roll magazine; Bandwidth 29mm; Product size 380x200mm; Foot switch. Banding machine Akebono OB 301 N; cleaned and checked; Big Roll Magazine; band width 29mm; package size 380x200; foot switch.

Glass bottle filler and capper with short-tube filling valves for level filling (measured filling) of bottles. The bottles are pre-evacuated (11 kW vacuum pump from GEA Ahlborn). The pinion control system was replaced in 2025. As part of this, all pinions were also replaced. The air ring for the lifting cylinders of the filling mechanisms was replaced around 2023., Additional title: Short-tube filler with pre-evacuation and crown cap sealer, Capactity: 44000 bo/h, Number of filling valves: 90 pcs., Number of capping heads: 15 pcs., Formats: 0,5 l NRW bottles; crown caps, Material: housing and contact surfaces from stainless steel, Base construction: caroussel-type filling and capping block, Features: filling carousel with 90 short-tube filling valves; crown cap sealer with 15 sealing heads; vacuum pump; bottle and cap rinse; bottle conveyor with drives and format components; protective h ...

System for depalletizing empty beverage crates and palletizing full beverage crates. The system consists of the following components: - Depalletizer (Matek/Packtech, 2001): robotic arm with clamping grippers for layer-by-layer depalletizing; upgraded in 2017. - Palletizer (Matek/Packtech, 2001): robotic arm with clamping grippers for layer-by-layer palletizing. - Pallet pressure check (Syscona, 2001) - 2 pallet magazines (for good and rejected pallets) - Pallet labeling system (2005) for applying EAN 128 labels - Pallet strapping system (Strapex, 2005) for applying two horizontal straps - Pallet conveyors with turning segments as well as infeed and discharge stations, Additional title: Complete palletising and depalletising system for beverage crates; 2001 - 2017, Capacity: 44000 bo/h, Formats: 0.5 L NRW bottles in 20-bottle and 9-bottle crates, Features: Depalletising robot; Palletising ...

Machining processes: drilling, turning, milling, axes: Z3 longitudinal slide tool turret, Z4 longitudinal slide tool turret, X3 cross slide tool turret, X4 cross slide tool turret, C1 workpiece drive, C2 workpiece drive, K5 turret swivel axis, K6 tool drive, K7 turret swivel axis, K8 tool drive, travel X3: 251mm, X4: 251mm, Z3: 662mm, Z4: 662mm, tool turret: 12-station radial, DIN 69880-VDI40, drive: DIN 5480-W20x0.8, tool swing diameter: 580mm, specified dimension at tool area: 320mm, length: 13,000mm, width: 7300mm, height: 4100mm, weight: 22t, operating hours: 14,748h. Equipment: OP012 control panel, Kuka handling robot, chip conveyor, coolant tank, hydraulics, pneumatics, electrical cabinet, parts infeed and outfeed, documentation, installation plan, working area diagram, gearbox plan and transport plan. The following components should be overhauled: machine bed (guideways/ball screw ...

A Bosch OBD 10/53L 12 and a Bosch OBD 15/54L 17 are available, strip width: 250mm, usable height: 260mm, number of furnace doors: 3, doors: inlet, intermediate and outlet door, strip speed: 1.8m/min, cycle time: 25min, cycle distance: 700mm, operating temperature of decarburizing zone: 760°C, operating temperature of bluing zone: 550°C, heating capacity of decarburizing zone: 84kW, heating capacity of bluing zone: 18kW, evaporator heating capacity: 3kW, evaporator water consumption: approx. 0.5l distilled water/h, energy consumption: approx. 45kWh/100kg net weight, total decarburizing time: 150min, cycle time: 25min, cycles in the decarburizing zone: 6, decarburizing zone temperature: 760°C, holding time: 30min, propane/air ratio for protective gas generation: 1:18, protective gas quantity: approx. 35Nm³/h, propane quantity: 2Nm³/h, air quantity: 36Nm³/h, combustion tower temperatu ...

The cell consists of two Kawasaki FD 50N industrial robots as well as an infeed and outfeed conveyor, it is mounted on a compact, mobile base plate equipped with threaded holes for fastening the individual components, a roller conveyor and the safety enclosure, the entire cell is forklift-compatible, can be relocated after installation to adapt the cell to different production lines, particularly suitable for seasonal production and short production runs, area: 8.6m², overall length: 3550mm, overall width: 2440mm. Number of axes: 5, max. reach: 2100mm, max. payload: 50kg, repeatability: +/-0.15mm, robot weight: 580kg, palletizing capacity: 2400 cycles/h at 50kg payload, controller: D42, working envelope: 1100x1100x1944.7mm, axis movements: Axis 1: +/-157°, Axis 2: +140° to -95°, Axis 3: +30° to -205°, Axis 4: +/-360°, Axis 5: +/-10°, axis speed: Axis 1: 180°/s, Axis 2: 150°/s,  ...

turning diameter over bed: 500 mm turning diameter over slide rest: 300 mm turning length: 1000 mm total power requirement: ? kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 2,511,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Zum Verkauf stehen professionelle Bäckereischneidemaschinen vom Typ SCHICKART 30 PLUS. Wir bieten 2 Stück robuste, industrielle Schneidemaschinen aus Edelstahl an. Die Geräte sind für das schnelle und präzise Schneiden von Backwaren konzipiert – geeignet für Bäckereien, Konditoreien, Geschäfte, die Gastronomie sowie die Lebensmittelproduktion. Die wichtigsten Informationen: Hersteller: SCHICKART Modell: 30 PLUS Anzahl: 2 Stück Ausführung: Edelstahl robuste industrielle Bauweise Einstellmöglichkeiten und Arbeitselemente zur Anpassung des Gerätebetriebs ausgestattet mit einer Auffangschale Gebrauchtgeräte, sichtbare Gebrauchsspuren optischer Zustand wie auf den Fotos

x-travel: 290/300 mm y-travel: 150/160 mm z-travel: 330/340 mm total power requirement: kW weight of the machine ca.: 675 kg dimensions of the machine ca.: 2700 x 2500 mm The machine was overhauled by the company Harich in 2017. Machine number: 57330/08 Technical data: Table longitudinal movement (motorized/manual): 290/300 mm Spindle head transverse movement (motorized/manual): 150/160 mm Support vertical movement (motorized/manual): 330/340 mm Angle table clamping surface: 600 x 210 mm Spindle speeds: 40 – 2000 rpm Tool holder: Standard taper 40 Motor power: 1.5/1.9 kW Feed rate range (infinitely variable): 5 – 500 mm/min Rapid traverse: 1200 mm Equipment: 3-axis digital readout (Heidenhain) Vertical milling spindle with quill adjustment Additional horizontal spindle REPAR 2 safety device (www.repar2.com) Operating manual The machine will be loaded onto a Euro-pallet, total height: ...

turning length: 1000 mm turning diameter: 460 mm swing diameter over bed slide: 270 mm turning dia. in gap: 690 mm spindle bore: 80.0 mm turning speeds: 25 - 1700 U/min bed width: 300 mm spindle taper: DIN 55029 D 1-8 taper in tailstock: 4 MK quill travel: 130 mm total power requirement: 5.5 kW weight of the machine ca.: 1675 kg. range L-W-H: 2300 x 1080 x 1600 mm Scope of delivery: - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-250 mm / D8 - Clamping disk 450 mm - Coolant system - Initial filling with Shell Tellus 46 - Fixed steady rest - passage diameter max. 150 mm - Follow-on steady rest - passage diameter max. 110 mm - Quick-change tool holder with 4 inserts - Protective device for quick-change tool holder - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - Slip clutch - Rapid traverse lengthwise and facewise - ...

turning length: 500 mm turning diameter over bed: 297 mm turning diameter over slide rest: 160 mm spindle bore: 36.0 mm tool adaptor: DIN 55022 Gr. 5 quill:: 3 MK quill travel: 90.0 mm turning speeds: 30 - 3550 U/min motor speeds:: 1410 / 2830 U/min total power requirement: 3.3 kW voltage: 380 V weight of the machine ca.: 620 kg. range L-W-H: 1420 x 700 x 1200 mm from a vocational school - very good condition () regularly receive a WEILER factory service particularly suitable for medium-precision turned parts Equipment: - robust lead/pull spindle lathe - KLOPFER four-jaw chuck Ø 140 mm - KLOPFER three-jaw chuck Ø 140 mm - collet holder with lots of collets - foldable lathe chuck guard - chuck key - MULTIFIX steel holder A, with 3x new inserts - movable tailstock - adjustable bed stop - control panel, front left - automatic feeds for face and top support - pole-changing drive motor - ...

turning length: 800 mm turning diameter: 280 mm turning diameter over slide rest: 150 mm spindle bore: 42.0 mm tailstock quill taper MT: 3 MK bed width: 208 mm turning speeds: 42 - 2022 U/min spindle taper: DIN 55027/5 quill stroke: 90.0 mm voltage: 380 V total power requirement: 3.0 kW weight of the machine ca.: 750 kg range L-W-H: 1800 x 800 x 1250 mm Due to its design (type, performance, feed rates, etc.) it can be used successfully in training workshops, but also for toolmaking and repair shops. Equipment: - robust conventional lead/spindle lathe - WMW 3-jaw chuck Ø 150 mm - faceplate 280 mm - MULTIFIX quick-change holder, with insert - movable tailstock - chuck key - machine base with storage area - pole-changing drive motor - operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning length: 500 mm turning diameter over bed: 297 mm turning diameter over slide rest: 160 mm spindle bore: 36.0 mm tool adaptor: DIN 55022 Gr. 5 quill:: 3 MK quill travel: 90.0 mm turning speeds: 30 - 3550 U/min motor speeds:: 1410 / 2830 U/min total power requirement: 3.3 kW voltage: 380 V weight of the machine ca.: 620 kg. range L-W-H: 1420 x 700 x 1200 mm from a vocational school - very good condition () regularly receive a WEILER factory service particularly suitable for medium-precision turned parts Equipment: - robust lead/pull spindle lathe - KLOPFER four-jaw chuck Ø 140 mm - KLOPFER three-jaw chuck Ø 140 mm - collet holder with lots of collets - foldable lathe chuck guard - chuck key - MULTIFIX steel holder A, with 3x new inserts - movable tailstock - control panel, front left - automatic feeds for face and top support - pole-changing drive motor - machine base frame, w ...

turning length: 500 mm turning diameter over bed: 297 mm turning diameter over slide rest: 160 mm spindle bore: 36.0 mm tool adaptor: DIN 55022 Gr. 5 quill:: 3 MK quill travel: 90.0 mm turning speeds: 30 - 3550 U/min motor speeds:: 1410 / 2830 U/min total power requirement: 3.3 kW voltage: 380 V weight of the machine ca.: 620 kg. range L-W-H: 1420 x 700 x 1200 mm from a vocational school - very good condition () regularly receive a WEILER factory service particularly suitable for medium-precision turned parts Equipment: - robust lead/pull spindle lathe - KLOPFER four-jaw chuck Ø 140 mm - collet holder with lots of collets - chuck key - MULTIFIX steel holder A, with 3x new inserts - movable tailstock - adjustable bed stop - control panel, front left - automatic feeds for face and top support - pole-changing drive motor - machine base frame, with cabinet door (storage area) - chip spla ...

turning length: 1500 mm turning diameter: 460 mm swing diameter over bed slide: 270 mm turning dia. in gap: 690 mm spindle bore: 80.0 mm turning speeds: 25 - 1700 U/min bed width: 300 mm spindle taper: DIN 55029 D 1-8 taper in tailstock: 4 MK quill travel: 130 mm total power requirement: 5.5 kW weight of the machine ca.: 1845 kg. range L-W-H: 2750 x 1080 x 1600 mm Scope of delivery: - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-250 mm / D8 - Clamping disk 450 mm - Coolant system - Initial filling with Shell Tellus 46 - Fixed steady rest - passage diameter max. 150 mm - Follow-on steady rest - passage diameter max. 110 mm - Quick-change tool holder with 4 inserts - Protective device for quick-change tool holder - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - Slip clutch - Rapid traverse lengthwise and facewise - ...

turning diameter over bed: 340 mm turning diameter over slide rest: 260 mm turning length: 700 mm spindle bore: 48 mm spindle turning speed range: 25 - 2000 U/min spindle nose: DIN 55027 KK 5 voltage: 380 Volt total power requirement: 2,2/4,4 kW weight of the machine ca.: 1000 kg. dimensions of the machine ca.: 1.800 x 700 x 1.500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 760 mm turning length: 3000 mm swing diameter over bed slide: 520 mm centre height: 380 mm reus: 17 (7,5 - 1015) U/min tail stock: MK6 quill stroke: 225 mm diameter of quill: 105 mm spindle bore: 132 mm feed: längs 0,039 - 18 mm/min feed: quer 0,02 - 9 mm/min total power requirement: 15 kW weight of the machine ca.: 4700 kg dimensions of the machine ca.: 4900 x 1650 x 1650 mm - Coolant device - Machine light - Chip back wall - Spindle protection - Lathe chuck protection - Tool holder protection - Interchangeable gears Special equipment - 3-jaw chuck Ø 250 mm type 3204/ DIN6350, BISON - MULTIFIX quick-change holder type B, including 4 tool holders - 3-axis digital display DRO Newall - Foot pedal with brake function CE The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Bulgarien : 86980 € : 1643.92 € : 860 mm : 3000 mm : 430 mm : 132 mm : 620 mm : 560 mm : 11 : 140 MK : 17 : 7,5 - 1015 1/min : 150 : 0.039 - 18 mm/U : 0.02 - 9 mm/U : 0.5 - 180 mm : 60 - 1/6 Gänge/ : 0.125 - 45 : 240 - 2/3 : 435 mm : 150 mm : 105 mm : 6 MK : 225 mm : 15 kW : 3470 mm : 1700 mm : 1730 mm : 4650 kg driven by conventional transmission 3-axes digital readout quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center four way rapid traverse device foot pedal brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low voltage machine lamp operating  ...

: neu : ca. 4 Monate ab Auftragse : Bulgarien : 53250 € : 1006.43 € : 500 mm : 1500 mm : 250 mm : 75 mm : 300 mm : 400 mm : 8 : 80 MK : 3 : 25-100, 100-400, 500-2000 U/Min : 120 : 0.04 - 12 mm/U : 0.02 - 6 mm/U : 0.5 - 120 mm : 60-1/4 Gänge/ : 0.125 - 30 : 240-1 : 315 mm : 130 mm : 90 mm : 5 MK : 230 mm : 11 kW : 3100 mm : 1250 mm : 1400 mm : 2800 kg driven by variable speed control (3 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 250 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS:  ...

: neu : Bulgarien : 26210 € : 500.61 € : 325 mm : 750 mm : 165 mm : 32 mm : 190 mm : 200 mm : 5 : 4,5 MK : 2 : 85-405, 470-2200 U/Min : 48 : 0.006 - 1.77 mm/U : 0.003 - 0.885 mm/U : 0.1 - 28 mm : 0.1 - 1.75 : 70 - 4 : 150 mm : 95 mm : 40 mm : 3 MK : 100 mm : 2.2 kW : 2150 mm : 950 mm : 1350 mm : 770 kg driven by variable speed control (2 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 160 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS: turning length1.000 mm € 26.730,- The data for this ad was created with ModulMW ...

: neu : Bulgarien : 133550 € : 2524.1 € : 1090 mm : 3000 mm : 500 mm : 155 mm : 690 mm : 700 mm : 15 : 160 MK : 4 : 3,7 - 15,6, 14,7 - 62, 58 U/Min : 160 : 0.032 - 38.9 mm/U : 0.016 - 19.45 mm/U : 0.5 - 480 mm : 60 - 1/16 Gänge/ : 0.125 - 120 : 240 : 525 mm : 270 mm : 125 mm : 6 MK : 260 mm : 30 kW : 8050 kg driven by variable speed control (4 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS: turning length1.500 mm € 118510,00  ...