136,402 used machines on RESALE, but how to find them? Machine Search
Consisting of a TBA 19 V 100 125ml Slim filling machine with a Tetra Pak TrayPacker TCBP70, Tetra Pak straw applicator TSA 21, Tetra Pak Tray Shrink 51, Tetra TTS 51. In addition, individual conveyor belts are available for this line according to customer layouts. With these machines, they have a complete production line.
turning diameter over bed: 297 mm turning diameter over bed slide: 160 turning length: 500 mm short taper holder: Größe 5 spindle bore: 36 mm spindle turning speed range: 30-3550 U/min number of speeds: 18 quill adjustment: 90 mm tailstock quill taper MT: 3 cross adjustment: +15 tailstock adjustment - manual: 500 mm total power requirement: kW weight of the machine ca.: 610 kg dimensions of the machine ca.: 1,4 x 0,7 x 1,2 m wedge bar chuck Forkardt: Ø 160 mm Accessories: Forkardt V-block chuck, Ø 160 mm Collet chuck, Collets, Steel Multifix system, size A with 3 quick-change inserts Integrated center point Chip guard The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Consisting of a TBA 19 V 100 125ml Slim filling machine with a Tetra Pak TrayPacker TCBP70, Tetra Pak straw applicator TSA 21, Tetra Pak Tray Shrink 51, Tetra TTS 51. In addition, individual conveyor belts are available for this line according to customer layouts. With these machines, they have a complete production line.
Consisting of a TBA 19 V 100 125ml Slim filling machine with a Tetra Pak TrayPacker TCBP70, Tetra Pak straw applicator TSA 21, Tetra Pak Tray Shrink 51, Tetra TTS 51. In addition, individual conveyor belts are available for this line according to customer layouts. With these machines, they have a complete production line.
Stainless steel sink, Fabr. Franke
Consisting of a TBA 19 V100 200ml Base Filling Machine with a Tetra Pak TrayPacker TCBP70, Tetra Pak Straw Applicator TSA 21, Tetra Pak Tray Shrink 51, Tetra TTS 51. In addition, individual conveyor belts are available for this line according to customer layouts. With these machines, they have a complete production line.
Pastry line, Fabr. Rondo, Compactline conveyor belt width 640, total length 7,000 mmStainless steel version, mobile
Consisting of a TTB 19 250 ml base filling machine with a Tetra Pak CBP32 V400 Cardboard Packer and a Tetra Pak Straw Applicator SA 30. In addition, individual conveyor belts are available for this line according to customer layouts. With these machines, they have a complete production line.
Cooling tunnel for chocolate enrobing machine, Sollich, type KS 820
Consisting of a TBA 8 LSC 1000ml filling machine with a Tetra Pak TrayPacker TCBP70, Tetra Pak Screw Cap TCAP 47 and a Tetra Pak Tray Shrink 51. In addition, individual conveyor belts are available for this line according to customer layouts. With these machines, they have a complete production line.
Key data: 2400 KW, 400 V
CHP Power Plant with 2 x CAT 1.2 MW / 50Hz Gas Generators – 2013 Complete, well maintained Combined Heat and Power plant build in year 2013 by local CAT dealer with two CAT G3516C gas engine driven generators coupled with heat recovery systems for hot water production. The plant was in operation till mid 2016 and currently installed and powered. Heat recovery systems have two circuits, one for engine jacket water and second stage of charge air cooler and another circuit for the first stage of charge air cooler and exhaust gas heat recovery. Exhaust gas tubular heat exchangers have exhaust gas by-pass option. Total accumulated operating hours are 16000 and 19000 hours only. Engines has been serviced by a local CAT dealer in accordance with maintenance manual and they haven’t had any major breakdowns. Engine control system is standard CAT model with Siemens logic, switchgears and s ...
Consisting of a REX TR/27 500ml and 1000ml filling machine with a Tetra Pak Cardboard Packer TCBP32. In addition, individual conveyor belts are available for this line according to customer layouts. With these machines, they have a complete production line.
Drilling- cutting machine Brand: Comec Type: Frontal 2 CN New machine Drawer parts machining in compact design Fast set-up for the smallest possible batch sizes thanks to CNC technology - Perfect machining The FRONTAL CN is ideally equipped for the machining of drawer parts and can be optionally equipped with drilling units from above, but also laterally, e.g. for drawer side parts. The drilling units at the top are suspended at the front of the upper beam so that a grooving saw unit can be mounted at the rear, for example, for drawing in top grooves. The machines can be equipped either with manual feeding or with automatic feeding magazine, so that the machines can work in continuous operation. For larger batch sizes, the FRONTAL is also available as a BASIC machine with conventional control.
Key data: 63 KW, 73 kVA, 400 V
senergino Gas Generator (CHP) SBG 50EL 4.12 TI. E Gas electricity and heat generators from 2011 with unknown operating hours, closed unit with control. 63 KWel x 1,500 rpm, 400 V/50 Hz. Leroy Somer LSA 43.2L8 C674, 73 KVA Manufacturer: senergino Model: SBG 50EL 4.12 TI. E Type: Natural Gas Electricity and Heat Generator Serial Number: D2N002416 Power [KWel]: 63 Voltage [V]: 400 Current [A]: 105 Frequency [Hz]: 50 Year of Make: 2011 Operating hours: unknown Weight unit [kg]: 1,940 Dimensions LxWxH [m]: 2.95 x 1.00 x 2.20
We are selling the stock of the soap factory Riesa here In the last picture you will find an overview picture of the production hall with the machine inventory. Here we offer you: 1 wrapping machine/ packing machine for soap Hull number: 6760.217.097 Output: 25 pieces per minute Weight: 950 kg Maximum pressure: 8 bar Feeder: Automatic Infeed Conveyor Loading FREE Truck
KAMA TS 105 / HFS 105 Year 2007 Diecutting and Hotfoil Sheet size : 74 x 105 max. / 33 x 48 min. Cardboard thicknesss: 130 - 1500 g/m² (1.8mm) Max. pileheight feeder : 1150mm Max. pileheight delivery : 880 mm Features: Mabeg Feeder Digital control Sheet allignment KAMA HFS 105 hot foil unit
New CNC drilling- and dowel inserting machine Brand: VITAP Type BLITZ 3.0 Blitz CNC drilling glueing and dowel inserting machine (axis X) 1300mm. Highly efficient and reliable thanks to a easy software. Ideal for JUST IN TIME production or mass production. Machine standard equipment: - Drilling head 3500 rpm - N °3 horizontal indipendent spindles - N° 3 vertical indipendent spindles - N °1 glue and dowels inserting unit - N °1 high capacity vibrator to feed the dowels - N° 1 low pressure pump for the glue Working area horizontal head: - X= 1300 mm - Y= 50 mm - Z= 50mm (vertical) - Z=25mm (horizontal) Combined drilling and driving unit for dowels: - Configurations of min. 6 x 25 mm and max. 10 x 40 mm are possible. - The desired dowel configuration must be specified when ordering. Sets for further dowel configurations are optionally availab ...
Turning length/ centre width 4m, Spindle inner diameter, Face Plate D 1000 m, Center height over support 360 mm, 2 Risings with roller jaw guide 1980 Retrofitted, Main spindle speed 215 - 355 rpm. Operations manual with circuit diagram, chip protection, Reversible steel holders, Supports have currently been overhauled, electric lock box, Weight approx. 15 tons, Guided tour possible, including attempted filming.
CONTROLS electronic controls DIMENSIONS / WEIGHTS space requirements -left/right-: 3600 mm space requirements -front/back-: 1500 mm total height: 2800 mm total weight approx.: 2000 kg never used (NEW) ! incl. Clean room - Perfect for high-precision cleaning of sensitive and complex components. - Ideal for optics, medical technology, precision mechanics, and micro-components. - Gentle ultrasonic fine cleaning for coated or delicate components. - Suitable for cleanrooms in applications with the highest purity standards. Manual loading of process tanks 1: Ultrasonic cleaning with heating to max. 60°C (68 l) 2: Fine rinsing process tank (68 l) with deionized water 3: Fine rinsing process tank (62 l) with deionized water Hot air dryer with heating to max. 110°C Manual emptying 5 transport baskets + 1 transport basket with rotation unit Dimensions: max. 300 mm x 250 mm ...
Drilling and sawing machine for side rails Franke type SG Technical data: Station 1: Cutting components to length Station 2: Drilled on the front side in increments of 27, 32 or 60 mm, 95 mm deep Station 3: drill another hole on the front side or the holes from station 1 are blown out Station 4: Deflection Testing
A glass processing plant with several production lines is available. 1) Cutting line with automatic breaking system 2) Cutting line with automatic breaking system 3) Glass scrap disposal line 4) Glass scrap disposal line 5) Double-sided glass grinding and washing machine Scheppach 2500 C4/0E with washing machine T 4516 133 6) Double-sided glass grinding and washing machine Scheppach 2500 C4/0E with washing machine T 4516 133 and portal drilling machine, max. glass dimensions: 2600x2200mm 7) Control system 8) Water supply system for washing machines with circulation water treatment, sludge dewatering, chemical supply, and additional components 9) Horizontal tempering furnace Tamglass ProE-2442-ABS-20 10) Domino D550+ 10 (55W and 10mm scanner). A large number of spare parts, complete spare robots, and numerous glass racks in various formats are also available for purchase. Complete documen ...
A horizontal flow-wrapping packaging machine Hugo Beck is available. Cycle rate: 5000/h, max. product width: 480mm, max. product height: 150mm, min. product length: 40mm, working height range: 820mm-900mm, max. roll diameter: 400mm, max. roll width: 600mm, roll materials: PO/PE/PP, machine width: approx. 1700mm, weight: approx. 2100kg. Including film folding device FF700-IN, print mark control, seal welding, overlap longitudinal sealing 10mm-30mm, pressure belt and pressure roller. Documentation available. An on-site inspection is possible.
internal grinding spindles: . centre height: 125 mm grinding length: 1000 mm grinding wheel diameter: 400 & 225 mm weight of the machine ca.: 3.1 t Internal grinding attachment with grinding spindle Misc.accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This 11-axis Finn-Power SG6 12.61 was manufactured in 2010. It features a maximum punching force of 300 kN and can handle sheet thicknesses up to 6 mm. The machine includes a thick turret with 20 stations and an integrated CNC right-angle shear for efficient part separation. If you are looking to get high-quality punching capabilities, consider the Finn-Power SG6 12.61 punching and bending machine we have for sale. Contact us for further details.
Filling machine Talsa F 25 NEW MACHINE, approx. 25 litres cylinder volume, Solid stainless steel construction, Ground stainless steel cylinder, Hydraulic pistons made of stainless steel, Lid and plunger made of solid stainless steel, Seals for lids and pistons flexible and low-wear, The motor and pump start and stop automatically (via internal contactor and microswitch) as soon as the toggle lever is pressed. Advantages: reduced energy consumption, lower heat and noise, as well as longer service life of the oil and hydraulic components, Piston can be easily removed with robust stainless steel hexagon piston puller wrench (included in delivery), High filling pressure for easy filling even of compact mixtures. No running of the sausage meat flow due to automatic decompression of the plunger. Locking of the toggle lever when lowering the piston. Automatic triggering/shutting off ...
Root End Reducer B&Z Type WRP SO Well-preserved fully functional root end reducer made by Baljer and Zembrod. Built in 2004. Complete with control, disposal scraper conveyor straight approx. 8.0 m and ascending approx. 6.0 m. Including hydraulic log ejector. The hydraulic power unit with 15 kW is included in the scope of delivery, we also have the remote control for the control of e.g. sorting trolleys. Complete steel substructure. Length of milling shaft 1,380 mm. Drive of milling shaft with 75 KW motor. Feed motor slewing gear with 4.5 kW. Drive scraper conveyor with 3.0 kW.
CNC unit for routing and boring Brand: Atemag Type: Function Line Soft Touch One With surface copying function with fix spindle ER25 and fix bell Max. drive speed 18,000 R.P.M. Max. tool spindle speed 18,000 R.P.M. Gear ratio i = 1:1 Turning direction left/right Torque max. 10Nm Tool interface: fix ER25 Adjustment distance: 70mm
turning diameter over bed: 340 mm turning diameter over slide rest: 177 mm turning length: 630 mm spindle turning speed - stepless: 55-3000 U/min weight of the machine ca.: 1.55 t dimensions of the machine ca.: 2 x 1 x 1.6 m Digital read-out HEIDENHAIN Misc.accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Biomass CHP Boiler Plant – 5.4 MW Thermal and 995 kWe Turbine Capacity A lightly operated, complete biomass CHP boiler plant featuring a 9.5 MW bubbling fluidized bed boiler (BFB), designed for wood-based fuels. The plant includes a back-pressure steam turbine and a heat exchanger for hot water production from back-pressure steam. The plant was built by Estonian Filter Solutions, a company highly experienced in steam boiler plant engineering and EPC contracting. The BFB steam boiler was delivered by Vapor Boilers Finland. The steam turbine was manufactured by Triveni Turbines (India), in combination with a generator and controls from ABB. Other key equipment includes KSB pumps, conveyors from Technobalt AS, and rotary airlock valves from Rotolok UK. The power plant was commissioned in 2013 and operated at partial load until 2015. The control system, developed by Filter Solutio ...
Table cutter Talsa K 15, NEW MACHINE, approx. 15 litres bowl capacity, Touch screen 10 inches, infinitely variable knife speed 750 - 3500 rpm, Stainless steel construction, solid cast stainless steel bowl, with removable 3-piece cutter head as standard, (optionally also available with a 6 mm cutter head) programmable, automatic stop according to time and/or temperature, Quality knife of BE machine knife, transparent noise protection cover in accordance with CE, closed lower case, Digital, electronic sausage meat thermometer, Easy cleaning, el. Connection 230V, 2.25kW
Manufacturer: NeoDen Model: N10P Year of Manufacture: 2026 Type of Machine : Pick and Place Machine Technical Specifications - Number of heads: 8 (fully closed-loop control system) - Maximum placement speed: 20,000 CPH - Position accuracy: +/- 0.01 mm - Camera configuration: dual mark camera + front flying camera + IC camera - Component range (flying camera): 0201 to 22x22 mm - Component range (IC camera): 0201 to 40x40 mm - Maximum component height: 16 mm - PCB size minimum: 50x50 mm - PCB size maximum (without IC tray): 450x1500 mm - PCB size maximum (with IC tray): 395x1500 mm - PCB thickness: 0.2 mm to 3.5 mm - Feeder capacity (tape and reel): 80 positions (33 front + 47 rear) - IC tray feeder: 1 - Automatic nozzle change: yes, 39 nozzle positions - Support pins to hold PCB: optional - Power: 600 W, single phase, 220V/110V, 50Hz/60Hz - Air source: 0.6 to 0.8 MPa ...
A barely used foil die-cutting and embossing machine Kama with integrated hot foil stamping is available. Die-cutting force: 165t, max. sheet format X/Y: 760mm/600mm, min. sheet format: 279mm/210mm, max. die-cutting format X/Y: 743mm/585mm, production speed: 5500sheets/h, gripper margin: 10mm, min. paper weight: 100g/m², max. cardboard weight: 1500g/m². Machine dimensions X/Y: approx. 5000mm/2700mm/2750mm, weight: approx. 6000kg, operating hours: approx. 1000h. Including Kama AutoRegister, vacuum pump, compressor and servo main drive. Documentation available. An on-site inspection is possible.
2G agenitor 406 CHP container, used, on behalf of a customer, with unit certificate Year of Make: 2013 Running Time: Approx. 30000 Bh Power: 250 kW electr. Delivery available for an extra charge
Manufacturer: NeoDen Model: YY1 Year of Manufacture: 2026 Type of Machine : Pick and Place Machine Technical Specifications - Machine style: single gantry with 2 heads - Alignment: vision and vacuum - Placement rate (vision on): 3,000 CPH - Placement rate (vision off): 4,000 CPH - Feeder capacity - tape feeder: 52 positions (all 8mm) - Feeder capacity - stick feeder: 4 - Feeder capacity - flexible feeder: 28 - Feeder capacity - bulk feeder: 19 - Nozzle change capacity: 3 nozzles - Component range - smallest: 0201 - Component range - largest: 18x18 mm - Maximum component height: 12 mm - Rotation: +/- 180 degrees - Placement accuracy: +/- 0.02 mm - X-Y repeatability: +/- 0.02 mm - Z-axis maximum movement range: 28 mm - PCB size maximum (dual sides tape feeder): 249x350 mm - PCB size maximum (single side tape feeder): 315x350 mm - Electricity supply: AC 100V to 240V ...
A modular bucket filling and lidding system Wittmann Robot Systeme is available. Components: bucket stack feeding, bucket stack transfer unit, bucket singulation, rake and filling, stopper, lid feeding, lidding, lid inspection and rotation for the further conveying processes. Number of formats: 6, format distribution round/rectangular, round bucket diameter: 226mm, round bucket height: 194mm, min. rectangular bucket dimensions X/Y/Z: 195mm/299mm/170mm, max. rectangular bucket dimensions X/Y/Z: 302mm/415mm/220mm, bucket volume: 5l/6l/10l/11l/16l. Including the corresponding conveyor units and motors. Documentation available. An on-site inspection is possible.
Well-maintained 90 litre cutter in stainless steel. Stepless speed, reverse mixing gear,
NeoDen4, the brand new and long-awaited model of NeoDen, is a desktop Pick and Place machine with vision system.NeoDen4 is with dual cameras, auto rails, auto electronic feeders and 4 placement heads, which could help to handle 0201, BGA, QFN and 0.8m/1.2m/1.5m LED strip.NeoDen4 is the best choice to satisfy all demands of high precision, high capacity,stable performance and low cost. Manufacturer: NeoDen Model: 4 Year of Manufacture: 2026 Type of Machine : Pick and Place Machine Technical Specifications - Number of heads: 4 (with vision enabled) - Placement rate: 4,000 CPH - Feeder capacity - tape reel feeders: 48 - Feeder capacity - vibrating feeders: 5 - IC tray capacity: 5 - Component range - smallest: 0201 - Component range - largest: TQFP240 - Maximum component height: 5 mm - Resolution X/Y axis: 0.01 mm - Resolution Z axis: 0.1 mm - Rotation: +/- 180 degrees (360 d ...
: 0360 mm : 215 mm : 1000 mm : 180 mm : 42 mm : 2,25/3,75 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Rex vacuum Filler -Type: RVF 736 -Power: 15 kW -Capacity: 3600 kg/h -Serving speed: up to 800 portions/min -Portion range: 5-9999.9 grams -Operated hours: 29337 -Linking and holding device included -Additional funnels included -With loading -Dimensions: 2100 x 1230 x 1950 mm -Power supply: 400V 50Hz 3Ph -Condition: Used in very good condition, ready to work
A large-format can filling and closing machine JBT FoodTech from the food industry is available. Can weight: 750g/1000g, can content: sweetened condensed milk, max. throughput capacity: 600cans/min, filling heads: 22, closing heads: 5, design: monoblock, control system: Siemens. Documentation available. An on-site inspection is possible.
: 0360 mm : 215 mm : 1000 mm : 180 mm : 42 mm : 3,75 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Complete, well-preserved log yard. Completely inclusive round timber feed for short and long logs, with long timber cutting and sorting, log turner, metal detector, debarking system Esterer ER 90, Bruks root reducer, and sorting line, very robustly built. Complete disposal and including the complete steel substructure and all cabling up to the switchgear. Complete control system as well as operating cab with operator station as a container solution. Simply complete Dismantling on your own
including speed regulator and a foot. Without belt. 0,75 Kw
incl. dispenser Working direction: left-right Number available (price per tank): 1 Capsule type: champagne cap applicator, champagne cap folding capacity / hour ca.: 4000 working direction: rotating turret, left-right Working type: fullautomatic amount of capping heads: 4
25 valves Filler Bertolaso for PET and glass (18 mm, hot filling ecologic with HEPA filter) (1998) Capacity: approx. 6000 bph different format parts Optional ID6103 - 24 grippers Rinser Procomac for PET and glas ID6011 - Screw capper Bertolaso 28 mm for PET (Plastic) (1998) with screw cap feeding
Machine completely in stainless steel Stainless steel frame with plexiglass doors with safety sensors whereby the machine stops automatically when the doors are open. Safety switches on the stars, worms and all moving parts whereby the machine stops Automatic magazine for the capsules Very well maintained All documentation available Capsule type: champagne cap applicator, champagne cap folding capacity / hour ca.: 6000 working direction: left-right Working type: fullautomatic amount of capping heads: 8
Double jacket, Tiltable drum, Incl. Berief L25 lifter for 200L eurobins, Capacity: 1600 litres, Heating: steam, max. 10 bar, Power: 3 x 400V, 50Hz, Dimensions: 4000 x 2000 x 2300 mm
A horizontal flow-pack packaging machine Cavanna is available. An on-site inspection is possible.
CIP cleaning, extra long infeed conveyor of 2000 mm, Belt width: 1000 mm, Frying length: 9000 mm, Heating: Thermal oil, 360 kW, Steam: 4 - 8 Bar, Compressed air: 2 - 4 Bar, Power: 3 x 400V, 50Hz, 30kW, Dimensions: 12600 x 2100 x 3400 mm, Weight: 10000 kg
maximum number of results exceeded
please refine your search
