gebr. Long belt grinding machine JOHANNSEN T96 YOC 1994 Total connected load: 5.7 kW / Rated current: 12.5 A Motor power: 4.0 / 5.5 kW 2 belt speeds Table size: 278 x 95 cm electr. Table lift Belt dimensions: 150 x 7,800 mm Maximum usable sanding belt length: 260 cm Large offset (right): 1,000 x 310 mm Left offset: 550 x 310 mm Pneumatic grinding unit (pneumatic pressure) incl. 2 sanding shoes: 300 + 450 mm (incl. suction device) Suction arm for vacuuming the sanding shoe Vacuum suction clamping device (pneum. workpiece clamping) with 8 suction cups incl. vacuum pump Turntable (stroke pneumatic) Sanding board with stop Selector switch for clockwise/counterclockwise rotation Suction nozzle right + left + sanding shoe (120 + 140 + 80 mm) Dimensions: 255 x 430 cm Weight: 900 kg Machine dimensions (approx. dimensions) W: 430 cm D: 162 cm H: 153 cm
Used machine Grinding height 340 mm Belt speed 22 m/s Table width 1,400 mm Table length 2850 mm Sanding belt length 7,800 mm Sliding range 950 mm Weight approx. 1200 kg
Long belt sanding machine Johannsen Type T8E Machine No. 14185 Built in 1979 Sanding belt dimensions 7100 mm x 150 mm Table size 2500 mm x 950 mm Upper sanding belt cover Motor power 4 kW Sanding belt 2 speeds left and right rotation Clearance under belt maximum 470 mm Right offset 300 mm Extraction connection diameter 160 mm Dimensions 3750 mm x 1350 mm x H 1400 mm Weight approx. 850 kg
Long belt sanding machine Johannsen With extraction system Type T 88 K-pneuma Machine No. 10771 For sanding, matting and polishing wood and lacquer surfaces, Wooden and plastic window frames Table size 2850 mm x 1400 mm For grinding long parts that extend beyond the machine Workpiece height maximum 500 mm 2 scraper brushes on the table Table height adjustment by means of handwheel Motor power 6/8 kW Sanding belt left and right rotation Including sanding pad 640 x 140 mm Including pneumatic sanding shoe 300 x 140 mm Upper sanding support throughout Foldable with cover for upper sanding pad Disc diameter 280 mm with support 300 mm x 140 mm Sanding belt dimensions 7800 mm x 150 mm Belt speed 11/22 m/sec. With belt blow-out nozzle With extraction fan Suction nozzle diameter 180 mm With extraction system Extraction system with 9 filters, cotton filter and ...
gebr. Long belt grinding machine JOHANNSEN T84 ST YOC 1990 Total connected load: 4.5 kW / 10.3 A Motor power: 3.8 / 4.5 kW 2 belt speeds (13.5 + 27 m/s) Table size: 270 x 80 cm electr. Table lift Belt dimensions: 150 x 7,100 mm Offset (both sides): 450x220 mm 2 sanding shoes Switch for clockwise/counterclockwise rotation Integrated lighting Extraction connection: 140 + 120 mm incl. various sandpapers Machine dimensions (approx. dimensions) W:400 cm D: 131 cm H: 141 cm Weight: approx. 700 kg The machine comes from a 1-man operation.
Power connection 380V 7.3kW Extraction 1x120 mm 1x180 mm Grinding table 2850 x 1550 mm Sanding belt dimensions 7820 x 150 mm Table height adjustment via handwheel LxDxH: 4400 x 1700 x 1450 mm Weight approx. 1100 kg
Technical data (subject to change) Space requirement 4,200 x 2,600 mm Tape measure 7,800 x 150 mm Table size 2,900 x 1,400 mm usable working length between the uprights max. 2700 mm Table lift by means of handwheel 340 mm Offset right 1100 mm Weight approx. 1300 kg (Compressed air connection required)
grinding length: ca. 2.600 mm grinding width: ca. 850 mm working heigth: ca. 340 mm engine: 4 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer: Johannsen, Type: T 86, Year: 1991, Sanding hight mm: 350, Table width mm: 1200, Table length: 2800, Hight adjustment by engine: yes, Sanding belt engine kW: 4, Travel range table mm: 300, 2 rotary directions: yes, Exhaust diameter mm: 130, Hight adjustment by engine: yes, Year :1991
Manufacturer: Johannsen, Type: T 92, Year: 1985, Sanding hight mm: 240, Table width mm: 800, Table length: 2600, Manual hight adjustment: yes, Sanding belt engine kW: ca.3, Travel range table mm: 800, Exhaust diameter mm: 180, Year :1985
Manufacturer: Johannsen, Type: LN 160 M, Belt length mm: ca.6500, Sanding hight mm: 400, Table width mm: 1200, Table length: 2600, Manual hight adjustment: yes, Sanding belt engine kW: 5,2/5,7, Travel range table mm: ca.1000, 2 rotary directions: yes, Stop straightedge: yes,
Manufacturer: Johannsen, Type: Langbandschleifer, Year: 1992, Table width mm: 800, Table length: 2799, Hight adjustment by engine: yes, Sanding belt engine kW: 4, Travel range table mm: 350, 2 rotary directions: yes, Exhaust diameter mm: 140, Hight adjustment by engine: yes, Year :1992
Manufacturer: Johannsen, Type: T 94, Year: 1993, Sanding hight mm: 350, Table width mm: 800, Table length: 2700, Hight adjustment by engine: yes, Sanding belt engine kW: 4, 2 rotary directions: yes, Exhaust diameter mm: 120, Hight adjustment by engine: yes, Year :1993
from training workshop - public institution used, top condition, little used make Johannsen type T 94 year of manufacture 1996 machine no.No. 21397 GS wood dust tested sanding length approx. 2600 mm sanding width approx. 850 mm belt length approx. 7800 mm x 150 mm cranking right approx. 550 mm electric adjustment upper belt cover upper sanding support belt speeds 22 m/sec. right-left run suction connection D 180 mm left space requirement approx. 2200 mm x 4050 mm weight approx. 700 kg storage location 97447 Gerolzhofen, free loaded, unpacked delivery as seen, without guarantee and warranty
