jogger polar ra used for sale

X-ray tube for multi star Type: MEGALIX 125/40/82CM-120W

Fully galvanized pallet racking DEXION Speedlock P90, built in 2008, very good condition, dismantled 2,700 mm, stand height approx. 9,000 mm only EUR 10.50/pallet spaces, 11.950 pallet places, specialist load 2,400 kg, 800 kg / pallet, field capacity of 14,400 kg, compartment width (can stand cut) be), stand width 1,100 mm, number stand 607 piece, number of trusses 6.950 piece. Including 60 piece bumper for rows of double mesh approximately 2,600 mm lg. + 320 piece bumper for single rack, shelf connectors. The shelf has been tested every year. First-class condition. Subsets can be purchased. ONLY EUR 10.50/PALLET SPACES. Alternative: stand price EUR 90.00, traverse price EUR 9.50.

Preliminary information: stock no. 4656: 1 used Radial drilling machine make OOYA, type RE 2-1300 A new in 1978

Preliminary information: stock no. 4657: 1 used Rapid radial drilling machine Make DONAU, mod. DR 28 Z with drilling head adjustment 600 mm work range: table 1200 x 500 mm

Carestream (Kodak) Direct view DR 9000 with the following system components: Generator Fischer Imaging Corp. DX 80 HF Tube Dunlee DU 404 0.6/1, 2_year of manufature 2004 1 x detector Trixell Pixium 4600_year of manufacture 2004 separate X-ray table • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipment in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • The sales take place as "used" to resellers or distributors, despite full functionality without warrenty/guarantee. • Installation and commissioning must only be performed by specialist staff with the appropriate qualifications.

GE Revolution XR/d with the following system components: Generator Jedi 80 tube MX 100 0.6/1.25 1 x detector 41cm 41cm separate mobile X-ray table company Zetta • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipment in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • The sales take place as "used" to resellers or distributors, despite full functionality without warrenty/guarantee. • Installation and commissioning must only be performed by specialist staff with the appropriate qualifications.

Description Brand UNOX Model XF 195 ID 0093 Status Active Price 800 € + VAT Location Oradea (RO) Shop oven with storage place UNOX XF195 manufactured in 2007. With AIR.Plus tehnology (fans with reversing gear), 99 baking programs memory each one made up of 3 baking steps + pre-heating, Protek SAFE technology for maximum efficiency and working safety (cool door glass and external surfaces). Temperature range: 30 C - 260 C. ExWorks. Price is negotiable. Contact Tel.: +40-359/175.575 Fax: +40-259/426.248 Mobil: +40-743/177.040 ; +40-740/221.698 Technical inspection can be organized at least 24 hrs before the due date We speak English. Wir sprechen Deutsch. (+40-740/221.698 ) Hablamos Español. Beszélünk magyarul. (+40-743/177.040 ) Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervam dreptul la grese ...

Siemens AXIOM sire Skop SD with the following system components: Generator Polydoros SX 65 Tube Optitop 150/40/80 HC 0.6/1.0 digital image processing Fluorospot compact Image intensifier Sirecon 40-4 HDR 40 cm The sale is to resellers or distributors despite full functionality without warranty as "Used", EXW Freiberg, Saxony, Germany. You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, properly lashed and wrapped with stretch film and can be picked up immediately.

We offer a car for ingredients here. Total mass:-height: 173.5 cm -Width: 41.5 cm -Length: 66.5 cm 9 containers. If you are interested and for more information we are available.

P135 - used approx. 46 m³ / 46,000 litres polyester tank, GRP tank, aboveground, on 2 steel bases, in good condition. technical details: capacity: approx. 46 m³ / 46,000 litres material: polyester tank / GRP tank manufacturer: Reich Tank specific gravity: 1.3 kg/L dimensions: approx. length 6.5 m x Ø 3.0 m x 3.4 m overall height other: Maximum operating temperature 95 degrees, used and in good condition, aboveground storage tank, lying horizontally, includes 2 steel bases. Lid and several ports on the top of the tank body, DN100 connection the front side, see photos. The tank will be repainted by us. The container can be used as a storage tank for many different media such as water, liquid feed, whey, molasses, liquid manure, rapeseed oil or as a rainwater tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the ta ...

gas heated Dimensions: 1617mm x 1550mm x 2535mm (Lxwxh)

We offer you here a new Pallet rack traverse for purchase. Due to the hot-dip galvanized surface, these are Traverses suitable for outdoor use. Technical data for the pallet rack traverse: Shelving system: Lücht & Palm Type: MB Included in delivery are: 01x pallet rack traverse,new Material color: hot-dip galvanized IPE profile: 120 x 60 mm Execution: Head traverse Agraffe: 2 HK (hooks) Clear width: 1,800 mm load per pair of trusses 3,600 kg, at the same time. distributed load 1x set HV set EN14399-4 - EN14399-6 10.9 Hexagonal screw with nut and discs for HV connection Material color: hot-dip galvanized In the case of these trusses, an edification for the Storage of shelf gratings welded on. (Height: 40 mm / Material thickness: 4 mm)

27 lfm pallet rack shepherd PR600 New and used goods, top condition see pictures. Height 4.7 m Depth 105 cm Beam length 3.3 m Load/compartment 3000 kg Field load 9000 kg Frame galvanized Carrier blue Negotiation price: € 1,750,-- net from stock Offer consists of: + 9 pcs. frame pre-assembled, depth 105 cm, height 4.7 m, new product + 32 pcs. carrier, length 3.3 m, 3000 kg load/compartment + 64 pcs. Suspension fuses + 18 pcs. concrete anchors + Load signs Goods are in stock. Transport and assembly possible on request. Visit possible at any time by appointment. More information on request. Constantly over 5000 lfm pallet racks in stock by numerous manufacturers. (changes and errors in the technical data, information prices and intermediate sale reserved! See our Terms and Conditions, all prices excl. VAT from stock) Purchase / Sale We are l ...

Technical data for the pallet rack traverse: Shelving system: SSI Schäfer Type: PR 600 Included in delivery are: 01x pallet rack traverse, used Material color: blue Box profile: 110 x 50 mm Agraffe: 5 HK (hook) Clear width: approx. 3,600 mm load per pair of trusses 1,900 kg, with the same. distributed load 02x safety pins, used Version: kompl. galvanized To secure the longitudinal members against unintentional lifting Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspection according to DIN EN 15635 carried out according to the Requirements of BGR 234 Visual inspection for all shelving systems Delivery with our own fleet (without discharge)

Technical data: Shelf height: 1,972 mm Shelf depth: 400 mm Total length: approx. 2,160 mm Consisting of: 3x Stand 1,972 x 400 mm - S1 12x Trusses 1050 mm long - 235 kg special load with evenly distributed load 24x Hangout fuses 6x Metal feet 6x Cover caps - Plastic These shelves are also available in other sizes. Let us create a free offer. The pictures do not correspond to the scope of the offer but are only used for illustrative purposes ! Shipping possible on request.

Technical data: Shelf height: 2500 mm Shelf depth: 400 mm Total length: approx. 4910 mm Consisting of: 5x Stand 2,500 x 400 mm - S1 32x Trusses S-3, 1200 mm long - 320 kg special load with evenly distributed load 64x Hangout fuses 10x Metal feet 10x Cover caps - Plastic These shelves are also available in other sizes. Let us create a free offer. The pictures do not correspond to the scope of the offer but are only used for illustrative purposes ! Shipping possible on request.

Technical data: Shelf height: 2,500 mm Shelf depth: 400 mm Total length: approx. 12,160 mm Consisting of: 11x Shelf stand 1,972 x 400 mm - S1 60x Trusses S-3, 1200 mm long - 320 kg special load with evenly distributed load 120x Hanger fuses 22x Metal feet 22x Cover caps - Plastic These shelves are also available in other sizes. Let us create a free offer. The pictures do not correspond to the scope of the offer but are only used for illustrative purposes ! Shipping possible on request.

Pallet rack heavy load shelving Jungheinrich Thyssen dismantled type multipal N, 3,360 pallet places, good condition, free partition load 2,400 kg, 800 kg / pallet, tray width loaded, 2,700 mm, 308 stand, stand height approx. 9,000 mm, stand width 1,100 mm, 1,680 trusses Length 2.700 mm. shelf connectors for rows of double mesh. The shelf has been tested every year. Good condition. Subsets can be purchased. Very reasonably priced for sale.

Description Brand LOGIUDICE FORNI Model Vortex - LFRNPE 6080 ID R185 Year of manufacture 2009 Location Oradea (RO) Electric rack oven Logiudice Forni Vortex - LFRNPE 6080 manufactured in 2009. Number of trays: 18, tray size: 60 x 90 cm, tray spacing: 94 mm, total baking surface: 9,7 m2, external size: (L x W x H): 204+30 x 135 x 230+38 cm, weight: 1620 kg, thermic capacity: 60 000 Kcal, 240 000 Btu/h, 70 Kw. Electric absoption: 52 Kw (resistor) + 2,5 Kw (motor). ExWorks. Price is negotiable. Contact Tel.: +40-359/175.575 Fax: +40-259/426.248 Mobil: +40-743/177.040 ; +40-740/221.698 Technical inspection can be organized at least 24 hrs before the due date We speak English. Wir sprechen Deutsch. (+40-740/221.698 ) Hablamos Español. Beszélünk magyarul. (+40-743/177.040 ) Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prio ...

C - bow, Ziehm Exposkop 8000, monitor cart with dual monitor. digital image storage, good condition, also as a possible loaner

C arm, monitor cart with dual monitor, digital multi image storage, good condition

Drilling capacity in steel St 60 40 mm Drilling capacity in cast 50 mm Threads in steel 32 mm Threads cast 42 mm Taper of spindle mount Mt 5 Projection 1.630 mm Quill stroke 310 mm Spindle speed range 40-1,800 RPM Feed areas 0.125 1.25 mm / Rev About 3,7 kW Machine weight 3.8 t Quick change system

Leventi Bake-off oven Model: BM MM Q2 Bakermat 10 2013 stainless oven with stainless cooling rack, six tray spaces, water pressure 1.5-5 bar

Philips Diagnost H with the following system components: Generator Optimus 50 Tube SRO 33100 0.6/1.3 Vertical stand Diagnost VE • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipment in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • The sales take place as "used" to resellers or distributors, despite full functionality without warrenty/guarantee. • Installation and commissioning must only be performed by specialist staff with the appropriate qualifications.

Krebser Kehrli urological xray system UX 96 L with the following device components: generator Stadler SE 3000 tube Comet DI 86 HS-33/100-150 0.6/1.3 • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the buyer to ensure that all equipment is thoroughly inspected and refurbished by qualified technicians before placing into patient  ...

Siemens Panorama dental x ray Orthophos with the following device components: generator D 3200 tube SR 90/15 FN 0.6 • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the buyer to ensure that all equipment is thoroughly inspected and refurbished by qualified technicians before placing into patient use.

Siemens small X-ray/intraoral x ray system Heliodent MD (tube SR 60/70/7 0.7) • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the buyer to ensure that all equipment is thoroughly inspected and refurbished by qualified technicians before placing into patient use.

VR 4A/1250 Producer Mas Max. drilling diameter 50 mm Max. vertical arm adjustment 750 mm Taper in spindle 4 Morse Main motor output 4 kW Dimensions l x w x h 2250x1055x2970 mm Machine weight 2700 kg

Siemens combined fluoroscopy and X-ray system Sireskop SX with the following device components: generator Polydoros SX 65/80 tube OPTITOP 150/40/80 HC 0.6/1.0 digital image processing Fluorospot TOP Image intensifier 40 cm PACS integration DLR 2nd Workplace 3D3 ceiling tripod 2nd tube OPTITOP 150/40/80 HC 0.6/1.0 vertical stand Vertix complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless oth ...

Siemens combined X-ray and fluoroscopy system Sireskop SX with the following device components: generator Polydoros SX 65 tube Opti 150/40/73 C 0.6/1.0 digital image processing Fluorospot H Image intensifier 33 cm complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the bu ...

Siemens X-ray and fluoroscopy system/ angiography Polystar TOP with the following device components: generator Polydoros SX 65/80 tube Megalix 125/40/82 CM 0.6/1.0 Digital image processing Fluorospot TOP Image intensifier Sirecon 40-4 HDR 40cm complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is  ...

Dornier Opus with the following device components: generator Hofmann Selector D tube Comet DI 97 HS-33/81-150 0.6/1.2 Image amplifier 40cm complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the buyer to ensure that all equipment is thoroughly inspected and refurbished by qu ...

Fischer Imaging Mammotest Plus S with: Mammotome SCM 23 (biopsy) Tube Varian M-147 SP 0.1/0.3 complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the buyer to ensure that all equipment is thoroughly inspected and refurbished by qualified technicians before placing into patien ...

OEC Medical System Compact 7600 with: Tube Nagel & Goller EP-F-190 0.6/1.5 Image amplifier 23 cm LIH (Last Image Hold) complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the buyer to ensure that all equipment is thoroughly inspected and refurbished by qualified technicians  ...

7 x Meva MD stacking frame with wheels is used for storing and transporting construction supports, wooden beams, etc. 155kg 7 x Meva MD Stacking rack with wheels Is used to store and transport props, wooden girders, etc. 155 kg

Length: 0 mm Module: 0 mm Width: 0 mm CNC Brand: 0 CNC Model: 0 Operating hours: 49903 Technical data Working range: Module from up to: 8 Toothed racks: Max. length to be shaped: 1850 mm Max. width to be shaped: 160 mm Table surface: Length: 2200 mm Width: 360 mm Max. ram stroke: 180 mm Distance ram to table: from: 55 mm up to: 280 mm Taper in ram: 50 ISO Ram stroke speeds: number (steps): 12 from: 26 s/min up to: 237 s/min Voltage 50 Hz 3x: 380 Volt Drive: 8.76 kW Machine´s weight about: 7100 kg Overall dimensions machine: Length: 5200 mm Width: 2300 mm Height: 2340 mm Description: gears are missing

Used rotary ovens W&P, Type: Rototherm REC 1280 -In bakery condition- Built in 1997 or 1994 - for trolleys 80 x 100 cm - Petrolium heater - incl. 1 pcs. trolley per oven - used in the bakery until the end - Condition: Good, well maintained El. Connection: 380 / 220 V, 50 Hz, 104 kW Baking space: 12.6 m2 Petrolium throughput: 9.0 kg/h There are 2 pieces available. Delivery costs on request. Inspection and test run are possible on request.

FOUR(4) PCS - MARINE GEARBOX TWIN DISC MG6848SC 2.931:1 MARINE GEARBOX TWIN DISC MG6848SC OVERHAULED COMPLETE WITH NEW HYDRAULIC HOSES AND CONNECTIONS

Siemens AXIOM Aristos FX Plus with the following device components: Generator Polydoros LX 30/50 Tube Opti 150/30/50 HC 0.6/1,0_Year of manufacture 2014 (ceiling-hanging) Vertical stand Aristos FX (ceiling-hanging) 1 Detector Trixell Pixium 4600 43x43 cm_Product No. 100204 • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the b ...

Spindle diameter 203.2 mm x-travel 9,000 mm y-travel 4,000 mm Grinding spindle diameter 335 mm Spindle holder ISO 60 Spindle speeds 1-350 / 5-1,200 rpm w-axis 800 mm z-axis 1,200 mm Rapid x-axis 8,000 m/min Rapid y-axis 6,000 m/min RAM Dimensions 530 x 600 mm Main drive 75 kW Total power requirement 165 kW Machine weight approx. 130 t Space requirements approx. 16 x 5.5 x 8.1 m Addition: - hydrostatic guides in x-, y- and w-axis - Telescopic cover for the X-axis of the bed - cumulative Z and W axes - Leveling shoes - Platform Y axis

2930-12-334-9277 / 0052000675

Composite equipment Bitzer with original condenser Freezer / normal cooling -4x compressor Bitzer 6F-40.2Y -Cooling capacity: 330 kW at -10oC/40oC, 180 kW at -25oC/40oC, 100 kW at -35oC/40oC -Volume: 4 x 151.6 m3 -Number of pieces in stock: 2 pieces -Refrigerant: Freon -With original condenser -In very good condition Price on request, We have many other Kealte plants : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman

1 LAMPERTI raising machine type GB, year 1988, wire with 230 cm, 36 raising rollers, can run open width or tubular, updated with inverter to the main motor

Shelves for drying lacquered wood Capacity Kg: 880

-Built 03 / 2007 -with oil burner -with 2 stikken wagons -with ramp -with exhaust air hood with integrated temperature and baking time indicator -digital control -for 60x80cm / 58x78cm sheets -Door stop on the right -available in the warehouse -Door with open-cut viewing window

Control Display Miwe CS for Miwe Rollin Stikkenofen Display control complete for Miwe Rollin stikken furnaces

Morse cone MK 3 Drilling performance: Steel 28 mm Casting 32 mm Ihivikt Extension 700mm 3 Pre-shed0.1 - 0.2 - 0.3 mm/U 15 Spindle speeds 50 - 1220 rpm Spindle stroke 165mm max. distance spindle - base plate 1300 mm max distance spindle clamping block approx. 800mm Dimensions clamping cube 470mm550mm500mm high Clamping area foot 870700mm Hoe adjustment boom approx. 620 mm Spindle motor 1.1 / 1.7 kW Lifting motor 0.55 kW Outside mass: Length 1400 mm; width 700 mm; height 2300 mm Weight approx. 1100 kg

Siemens Vertix 3D built 2010, refurbished 2019 The offer includes the following components: 3D ceiling stand with integrated cassette holder for ENT recording Grid wall 3D hydraulic multixtable Polydoros LX 30/50 Generator with touchscreen control panel Dose area productmeasuring device Agfa CR 85X Memory Film Scanner Transportation €860.00 Installation €2500.00 Optional: Full body grid wall AGFA CR Easylift, new X-ray tube, C-bow Ziehm Vista 6 months warranty When ordering by 01.03.2020 10% discount

Universal and variable X-ray system. Mobile C-bow with 80 kW power iruund compact design. Particularly suitable for vascular diagnosis and surgery, cardiology, neurology, orthopedics, etc. Very good image quality through CCD Camera, image postprocessing, DICOM etc.

21 x 3m power rail U - 400 VAC 3 x power rail U - 400 VAC 4 x Sockets 16 A 11 x Sockets Red small 16 A 5 x Sockets Red large 32 A 15 x Fuse box /distributor 63 A 2 x Box 16 A 1 x main power distributor for rails All in mint condition