jogger polar ra used for sale

diameter: -- mm workpiece length: -- mm work piece width: 15 mm range of angles: 15-50 ° plate thickness: 6-40 mm total power requirement: 1,5 kW Feed speed: 3,5 m/min. dimensions: 530 x 395 x 860 mm weight of the machine ca.: 94 kg The UZ15 RAPID machine is one of the fastest beveling machines with automatic feed on the market. It is not only suitable for workshops, but also for assembly work. It has a stepless Bevel angle adjustment system. Also, the machine with an automatic feed equipped. Working with the UZ15 Rapid is therefore very convenient. - For conventional steel (up to a strength of 600 MPA/ 87022PSI), brass, copper and aluminum materials - For chamfering workpieces with the minimum dimensions of 70 x 150 x 6 mm - Application range of sheet thickness 6 - 40 mm - The bevel angle can be easily adjusted from 15° to 50° continuously without that a part needs to be replaced - D ...

max. grinding diameter: 200 mm centre height: 100 mm centre distance: 525 mm weight of the machine ca.: 700 kg dimensions of the machine ca.: 120x100x150 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. grinding diameter: 200 mm grinding length: 525 mm centre height: 102 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

feed pressure: 70 bar liter capacity: - l tank: 80 l power capacity: 2,2 kW weight of the machine ca.: 400 t dimensions of the machine ca.: 0,83 x 0,6 x 1,6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data of the pallet rack crossbar: Shelving system: Stow Type: Pal Rack NS The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: RAL 2004 orange Box profile: 130 x 50 mm Truss Type: PNB0443|1.5 Agraffe: 4 HK (hooks) Clear width: approx. 3,600 mm Max. load per pair of trusses 2,417 kg with the same weight. Distributed load 02x Locking pins, used Design: compl. galvanized For securing the longitudinal members against unintentional lifting Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Technical data of the pallet rack crossbar: Shelving system: Stow Type: Pal Rack NS The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: RAL 2004 orange Box profile: 140 x 50 mm Truss Type: PNB0444 Agraffe: 4 HK (hooks) Clear width: approx. 3,900 mm Max. load per pair of trusses 2,300 kg with the same weight. Distributed load 02x Locking pins, used Design: compl. galvanized For securing the longitudinal members against unintentional lifting Note: Some of the trusses have 5-6 drill holes on the sides. Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery loc ...

Technical data of the pallet rack crossbar: Shelving system: Stow Type: Pal Rack NS The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: RAL 2004 orange Box profile: 120 x 50 mm Truss Type: PNB0442 Agraffe: 4 HK (hooks) Clear width: approx. 3,600 mm Max. load per pair of trusses 2,058 kg with the same weight. Distributed load 02x Locking pins, used Design: compl. galvanized For securing the longitudinal members against unintentional lifting Note: Some of the trusses have 5-6 drill holes on the sides. Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery loc ...

Technical data of the pallet rack stand: Shelving system: Stow Type: Pal Rack NS The scope of delivery includes: 01x Pallet rack stand, used Material colour: Ral 5015 blue Frame profile: PLFB 13 Profile dimensions: P 85 x 65 x 2.0 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( bolted truss ) Height: 3,300 mm Depth: 800 mm Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

faceplate diameter: 2650 mm turning diameter over slide rest: 2800 mm turning diameter over plate: 3200 mm turning length: 10000 mm upper slide-adjustment: 250 mm spindle diameter in front bearing: 400 mm spindle turning speed range: 0,35 -1,12 / 1,2 - 56 U/min feed: 0,05 - 18 mm/U workpiece weight: 9000 kg spindle motor: 60 kW max. workpiece weight between centres: 20000 kg Control: total power requirement: - kW weight of the machine ca.: 93 t dimensions of the machine ca.: m - CNC control NUM 1060 - 4-jaw face plate - Steel holder device - Tailstock - Base plate - Roller setting vice - Transverse travel of the top slide: 425 mm - Longitudinal displacement of the main slide in the centre section: 150 mm - Transverse displacement of the centre section on the lower section: 700m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pile lifter Rachner RSL 50-A; Condition unused; Platform size 890x630mm; Load capacity 650KG; Automatic mode with light barrier. Pile lift Rachner RSL 50-A; condition never used; size 890x630mm; lifitng capacity 650 kg; autimatic mode with light bar.

Turning module/pile turner Rachner STM 150; Condition unused; Format 530x430mm; Load capacity 150kg; Max. Stacking height 800mm, min.320mm. Turn modul/pile turner Rachner STM 150; condition never used; size 530x430mm; lifting capacity 150kg; max.pile hight 800mm, min.320mm.

Power: 55 kw Shredding field: 1300 x 700 mm Equipped with 2010 mat dimensions: 3000 x 1300 mm Excellent blown product mill

Combi Steamer Rational SCC101G for 10×1/1 GN, Natural Gas, can be set to LPG, 230 V, 39 kW, 1.7 A, core temperature, steam, fan speed programmable, 1/2 energy, cool down, self-cleaning, and much more, incl. manual, dimensions 85x77x102 cm, suitable substructure 2367

De uitrusting bestaat uit: - 3 decoilerstations met een capaciteit van 5 ton - Ras richteenheid - Ras hoekuitsparingeenheid - Rashydr-unit voor het walsen van verstevigingsribben in het plaatwerk - Rasschaar voor het op lengte knippen - Ras vouwunit voor vierkante luchtkanalen

Type: 82.25 Max sheetthickness: 2 mm Cuttinglength: 2540 mm Electric motor (power): 3 kW Weight: 1600 kg

spindle diameter: 130 mm x-travel: 6000 mm y-travel: 2500 mm z-travel: 800 mm w- away: 600 mm rapid traverse: 10 m/min spindle speed:: 1600 UPM chip conveyor: vorne control: Seit 1998 Heidenhain Plate area: 6000x4000 mm power capacity: 45 kW The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Granulator Rapid- G15035-DT (3 pcs.) Year of manufacture: 2013-2014 Location: Lodz, Poland Description: Slow-Moving Granulator with Gearbox Power: 2.2 kW 4 stator blades, 15 rotor blades, the sieve - interchangeable Hopper inlet: 390x240 mm Grinding chamber opening: 340x170 mm Hole for material case is prepared for connection with suction conveyor All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

RAIMANN multi ripsaw, type KS 310, Machine specifications:, - Max. cutting width 310 mm, - Max. cutting height 120 mm, - Chain width 340 mm, - Motor power 45 kW, - Variable speed feed chain, - Upper part feed unit electric adjustable, - With lasers and accessories, - Incl. 2 pc. belt conveyors

Separator - S+S Rapid Vario FS70 Year of Make: 2011 Location: Lodz, Poland Description: Separator for non-ferrous, ferrous and non-ferrous metals, with detector All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

Hydraulic power unit with hydraulic pump RACINE / VICKERSHydraulik gensetOperating pressure: max. 44 barVolume flow: 13 litres/min. Tank capacity: 40 litersEngine speed: 950 rpm. Engine power: 0.75 kWNetz connection: 380 Volt, 50 Hz- 1 piece hydraulic vane pump PVQ-PSS=-06CR-J11- Hydraulic tank with maintenance cover and oil level sight glass- 2 pieces hydraulic hoses with 12L connections, length = 950 mmSpace requirement L x W x H:: 700 x 400 x 750 mmWeight: 97 kg (without oil content); used

Serie: 2070 Zaagbladdiameter: 500 mm Maximale snelheid: 2800 tpm Gewicht: 320 kg

Key data: 75 t, 80 mm, 120 1/min

Pressure 75 t Stroke rate 120-600 / min Sheet width 10-300 mm Table size 1050 x 820 mm Pusher clamping surface 960x820 mm Distance table - UK plunger 380 mm Adjustable stroke - max. 80 mm Feed length 0-150 mm Total power requirement 20 kW Machine weight approx. 13 t Feed unit with max. belt speed 70 m/min Eccentric shaft with 4-fold bearings 2 connecting rods Central lubrication incl. magnetic belt conveyor - in use until 2020 -Operating instructions -Manual - Circuit diagram etc..

Working width: 2000 mm Roller width: 2200 mm pressure: 50 t Pressure line: 230 N / mm Number of rollers: 3 Stück Upper roll: 280 dia Roller covering: Stahl, verchromt Heating - upper roll: Thermoöl Middle roll: NIPCO-Walze , 500 mm dia Roller covering: Polyamidmantel Lower roll: Stahl dia diameter of lower rolls: 280 mm Roller covering: Schreiner-Gravur Clouth speed: max.100 m/min Weight: 26 to dimensions of the machine ca.: 6,0 x 8,0 x 3,3 m 3-roll calender with 2 steel rolls, upper steel roll smooth - chrome-plated, lower steel roll with carpenter engraving, heating with thermal oil (via heat exchanger), middle roll as NIPCO roll, this can be rotated by 180°, for use in the upper or lower roll nip, infeed with working platform, triple profile spreader holders + metal detector E&L, outfeed with hydraulic MENZEL Sochor winder, The data for this ad was created with ModulMWS - the sof ...

Screening machine in good condition for sale. Type Schwanog Rapid SBM 63 GDS - Year of construction 1973 - Machine No. 1198

Technical data of the pallet rack stand: Shelving system: Stow Type: Pal Rack NS The scope of delivery includes: 01x Pallet rack stand, used Material colour: grey Frame profile: PLFB 16 Profile Dimensions: P 100 x 65 x 2.5 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( bolted truss ) Height: 8,500 mm Depth: 1,100 mm Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Technical data of the pallet rack stand: Shelving system: Stow Type: Pal Rack NS The scope of delivery includes: 01x Pallet rack stand, used Material colour: grey Frame profile: PLFB 155 Profile dimensions: P 100 x 65 x 2.25 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( bolted truss ) Height: 8,500 mm Depth: 1,100 mm Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Second Hand Screw Compressor Ingersoll Rand R37IE-A 37 kW, 7.6 bar at 6.46 m3/min. Built in 2013 with only 18,254 hours

Key data: 30 kN, 1000 mm

This offer is aimed exclusively at entrepreneurs within the meaning of § 14 BGB. The price is net plus 19% VAT. Title: Vertical Broaching Machine Manufacturer: Rausch GmbH & Co. KG Type: RS 30/1000 Machine No.: 3813 Year of Make: 2019 Never put into operation Full documentation without broaching needles Workspace Stroke: 1000 mm Gross tractive force: 30 kN small/large cutting speed: 1.0 – 7.5 m/min small/large return speed: 1.0 – 7.5 m/min Indoors: Tool feeder: by hand/independently Large workpiece Ø: 300 mm Outdoor spaces: fixed/movable/rotatable workpiece clamping plate Area of clamping plate: 255mm x 400mm T-slots: 2 pieces, 14mm wide, parallel/perpendicular to the clamping surface of the tool carriage Accessories/special equipment: Coolant Setup Broaching tool safety Machine hood to protect the working area Area requirement: 0.72m x 1.3m x ...

Profile belt sanding machine, PS0 Rasprofil from Zimmermann with many accessories Sanding machine with swivel table and additional equipment for rasps. Ideal for use in model making and mould making. For precise grinding of contours. All settings with clamping lever and fine adjustment. Drive motor 400Volt, 1.1kW Table can be swivelled up to 45 degrees forwards and up to 20 degrees backwards Machine table approx. 400 x 400mm Fold-down upper extraction arm for sanding large parts. By snapping the free-standing profile rail into the upper part of the machine, a high angular accuracy can be achieved. Including three profile turning rails 15, 30 and 40mm (straight and radius) In addition, some sanding belts, see photos Three unused rasps. Suction connection 80mm Original paint, dabbed in places CE mark Very well maintained machine from prototype production in the motor ...

cutting diameter: 500 mm cutting length: 5000 mm saw blade diameter: 420 - 500 mm dimensions: ca.6400 x 1500 x 1600 mm weight: ca. 1600 kg feed: stufenlos digital readout: Motorized length adjustment with digital display manual and spare part list included The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data for the pallet racking system: Shelving system: Stow Type: Pal Rack NS Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: approx. 7,510 mm Number of fields / row of shelves: 05 pcs á 1,400 mm Number of levels plus ground level: 02 pcs. The scope of delivery includes: 06x Pallet rack stand, used Material colour: Ral 5015 sky blue Stand Type: PNFB12 Profile dimensions: 85 x 65 x 1.75 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( bolted truss ) 1,750 mm high 1,100 mm deep 20x Pallet rack crossbar, used Material colour: orange U-profile: 150 x 50 x 3.00 mm Agraffe: 4 HK (hooks) Design: Head crossbeam Clear width: 1,400 mm 40x Safety pin, used Material colour: sendzimir galvanised For securing the longitudinal members against unintentional  ...

Technical data for the pallet racking system: Shelving system: Stow Type: Pal Rack NS Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: approx. 7,760 mm Number of fields / row of shelves: 05 pcs á 1,450 mm Number of levels plus ground level: 02 pcs. The scope of delivery includes: 06x Pallet rack stand, used Material colour: Ral 5015 sky blue Stand Type: PNFB12 Profile dimensions: 85 x 65 x 1.75 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( bolted truss ) 1,750 mm high 1,100 mm deep 20x Pallet rack crossbar, used Material colour: orange Truss Type: PNBH0443/1.5 Box profile: 130 x 50 mm Agraffe: 4 HK (hooks) Design: Head crossbeam Clear width: 1,450 mm 40x Safety pin, used Material colour: sendzimir galvanised For securing the longitudinal members  ...

Key data: 3 mm, 3000 mm, 130 m/min

One used Ravni starigtening and cutting machine for 3.0 to 8.0mm wire. Cutting length: 3.000mm Machine is equipped with double pay off for 3 t spools and dust abstructor Year: 2014

Key data: 3190 mm, 6 mm

Note: Machine is currently still being revised, the illustrations were made before the Revision. Sheet width: 3190 mm Sheet thickness steel: 6.3 mm Colour: grey Total power requirement: 18.5 kW Machine weight: 6800 kg Dimensions: 3830 x 3820 mm with cutting gap adjustment Stroke rates per minute: 30 - 50 strokes/min Angle stop: 1500 mm Throat: 5 - 1000 (1500) mm

2x 6 niveaus capaciteit van één niveau: 552 kg lengte: 5000 mm breedte: 1800 mm hoogte: 2550 mm (zonder inhoud)

Height=1.06 m, Overall length= 0.85 m, Overall width= 0.9 m, Net weight= 150 kg,

Height=1.75 m, Overall length= 0.95 m, Overall width= 0.85 m, Net weight= 150 kg,

Height=2.5 m, Overall length= 1.25 m, Overall width= 4.2 m, Net weight= 1850 kg,

Height=1.68 m, Overall length= 0.84 m, Overall width= 0.85 m, Net weight= 175 kg,

Height=1.8 m, Overall length= 1 m, Overall width= 1.1 m, Net weight= 350 kg,

Ram K60D Planetary mixer Serial: 15099 2015, 60L stainless bowl, with beater attachment, with adjustable timer and speed controls, safety guard, 3Ph

Specifications: - Machine for the production of longitudinal folds on the edges - square or rectangular longer channels and - Number of roller shafts with folding rollers 15 pcs - Material thicknesses from 0.5 - 0.63 mm - Duct dimensions from 80 x 80 mm - up to 100 x 100 mm - from duct dimensions 100 x 100 mm - Material thicknesses 0.5 to 1.0 mm - Throughput speed 15 m/min - Pneumatic connection - Drive 400 V / 3 kW -with: - E. - Footswitch - Duct baffles - Separate lubrication device - Space requirement approx. W 5400 x H 1200 x D 800 mm - Weight approx. 950 kg

thread dia.: bis M 24 turning speeds: 0-600 / 0-150 U/min thread: M5 - M24 working area: 2050 Rmax. working range: 500 Rmin. work height max.: 900 mm table surface area: 700 x 900 mm oil volume: 100 l engine output: 3,0 kW weight - pallet system: ca. 300 kg Furnishing: - electro-hydraulic thread cutting machine - large working area (radius max. 2050 mm) including table clamping disk Swivel movement is smooth thanks to built-in gas pressure dampers - mobile machine base Oil tank + hydraulic unit integrated in the base frame hydraulic pressure gauge - continuous speed adjustment - vertical/horizontal thread cutting possible - Lateral sorting of the quick-change inserts possible - Connection cable with 16A plug Special accessories included / quick-change inserts: M05 / M06 / M08 / M10 / M12 / M14 / M16 / M18 / M20 / M22 The data for this ad was created with ModulMWS - the software so ...

Dewalt Radial arm saw Cutting width 350mm Cutting height 65mm 1.5KW 400V 50HZ Table 800 x 600mm Solid, cast-iron radial arm boom for maximum accuracy and durability with base frame Pull saw double bevel adjustable Hemming cuts also possible G&-5195-M3180

Manufacturer: Radenska-Steinle / Germany Type: RP 20/125 Spray heads: 20 Bottles 0.50 + 1.00 L + 1.5 liters Complete V2A Running Direction: Left to Right Year of Make: 1996 With control cabinet Film available - Please request

Manufacturer: HOFFMANN Model: RAWT Z5x4000x500 Year of Manufacture: 2001 Technical Data: - Frequency: 50 Hz - Operating Voltage: 400 V - Rated Current: 370 A - Control Voltage: 24 V DC - Solenoid Voltage: 24 V DC - Hydraulic Fluid: HLP46 DIN 51524 T.2 - Filling Volume (Hydraulic Fluid): 630 l - Max. Operating Pressure: 200 bar - Lubricating Oil: CLP68 DIN 51517 - Filling Volume (Lubricating Oil): 15 l - Workpiece loader/automation, 3 tool/clearing beams are included with the machine. - The machine has been used in 3-shift operation and is essentially in original condition. - Various spare parts (drive motor, gearbox, and other existing spare parts) can be purchased separately. Find more here - / Contact us at -

Production line is in good condition

Height=1.28 m, Overall length= 0.75 m, Overall width= 0.45 m, Net weight= 127 kg,

Technical data for the pallet racking system: Shelving system: META Rack Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves : 20,490 mm Number of fields per row of shelves: 06 pcs. Number of levels plus ground level: 02 pcs. The scope of delivery includes: 07x Pallet rack stand, used Material colour: sendzimir galvanised Profile dimensions: P 90 x 65 x 1.50 mm Stand Type: PN-15 Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( bolted truss ) Height: 4,500 mm Depth: 1,100 mm 24x Pallet rack crossbar, used Material colour: orange Box profile: 110 x 50 mm Truss Type: 110|55 Agraffe: 4 HK (hooks) Clear width: 3,310 mm 07x Stand protector, used Material colour: hot-dip galvanised Total height: approx. 970 mm Total width: approx. 98 mm Inner width: approx. 92 mm Total depth: approx. 40  ...