jogger polar ra used for sale

Black plate, with 3 sides margin

Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor -Speed: 7500 rpm -Shaft: Ø 35 mm -Dimensions: 370/192/H295 mm -Weight: 24 kg

Ethernet switch -compact, industry-compatible switch for mounting on top hat rails -Number: 10 pieces available -Price: per piece -Dimensions: 130/125/H70 mm -Weight: 0.5 kg

Ethernet switch -Type: RS30-1602O6O6SDAEHH06.0.02 -compact, industry-compatible switch for mounting on top hat rails -Number: 4 pieces available -Price: per piece -Dimensions: 130/125/H110 mm -Weight: 0.7 kg

Computer monitor, control unit, control unit, keyboard, screen, control -Manufacturer: INONET -Type: Radiance-15 -Dimensions: 400/300/H45 mm -Weight: 3.5 kg

Heavy-duty casters, heavy-duty wheels, tires, solid rubber tires -without: rubber coating -Load capacity: kg -Tire size: 350 x 155 mm -Mounting bore: 60 mm 2x with groove -Number: 4x wheels available -Price: per piece -Weight: 31 kg/piece

Electric motor, three-phase motor -Power: 0.75 KW -Speed: 920 rpm -Shaft: Ø 14 x 30 mm -Construction: B3 -Protection class: Ex -Dimensions: 295/175/H190 mm -Weight: 12.7 kg

Standard coolers, car coolers, oil coolers, heat exchangers -Oil cooler -Cooler area: 300 x 300 mm -with: fan -Dimensions: 300/160/H360 mm -Weight: 9 kg

Heavy-duty casters, heavy-duty wheels, tires, solid rubber tires -Load capacity: kg -Tire size: 400 x 145 mm -Holding bore: 60 mm -Number: 3x wheels available -Price: per piece -Weight: 60 kg/piece

Heavy duty castors, heavy duty wheel, tire, wheel, swivel castor, -Payload: 1,000 kg -directable -Brake -Ball bearings -Tire size: 250 x 60 mm -Mounting plate: 140 x 175 mm -Total height: 305 mm -Number: 6x bikes available -Price: per piece -Weight: 10 kg/piece

Heavy duty castors, heavy duty wheels, tires -Payload: 1,000 kg -Ball bearings -Tire size: 250 x 60 mm -Mounting plate: 140 x 175 mm -Total height: 305 mm -Number: 9x wheels available -Price: per piece -Weight: 7 kg/piece

The inclination scale is fully functional. The scope of delivery includes: 01x Inclination scale, used Manufacturer: Rapido-Werke Dimensions: approx. 1,250 x 1,360 x 2,250 mm (WxDxH) Maximum load: 750 kg Feet: 04x / height adjustable with tare compensation Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German General information about the item: This item is offered for pickup only. A transport that is also desired or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery.

Ref. -No.: 10361 Manufacturer: SCHIESS Year of construction: 2023 Type of control: CNC Control: Siemens, Heidenhain, Fanuc - Configurable as required Storage location: Halberstadt Country of origin: Germany financing: nach Anfrage Support sleeve diameter: 130 mm X-Travel: 3000 mm Y-Travel: 2000 mm Z-Travel: 1600 mm Spindle stroke: 800 mm B-Axis: 360 ° W-Axis: 800 mm Spindle Taper: SK50 Max. Tool Weight: 25 kg Clamping Area: 1250 x 1250 (or configurable as required) mm T - groove width: 22 mm T - slot spacing: 160 mm Swivelling: Configurable as required ° Numbers Of Tools In Magazin: 40, 60, 120, 200, 240 Spindle Speed: 2900 RPM Max. Torque: 2500 Nm Drive Capacity - Spindle Motor: 41 kW

Notching milling machine -automatic hydropneumatic milling feed -Maximum cutter diameter: 250 mm

Bending tool, die, upper knife, upper tool, straight tool -Tool: for press brake, 2 parts -Upper tool: dimensions 835 x 60 x 130 mm each -Dimensions: see the drawing in the photos -Total weight: 47.5 kg

1 pc. used worm drive motor - 5 cyl. radial piston motor ex Küpper-Weiss automatic spreader. Engine has run until the spreader is retired, sold as an untested spare parts carrier. More used parts as well as used winter service technology in stock - see example photos! ------ Jodau Municipal, Environmental & Green Maintenance Technology ------- Used machines for plant and sports field maintenance, gardening and landscaping, cemetery technology and winter service, sweeping and waste disposal, environmental maintenance, engines and more...

RAFFEL NH3 – 722 m² Brand:RAFFEL Type:NH3 – 722 m² Stock number:M23-2490 Cooling capacity:120 kW Application:Freezing Number of fans:3 Fin spacing:12 mm Defrost:Hot gas Refrigerant:R717 (NH3/Ammonia) Dimensions:5100 x 2260 x 5060 mm Number in stock:2 piece(s) Price:Quotation request Description: Nice Raffel Ammonia evaporator with 3 fans. Heat exchange surface is 722 m2. Visit our website: used-refrigeration

Rung and miter punch, rung punch -Manufacturer: Rammefabriken, mechanical corner punch -Intermediate dimension: 100 mm -Adjustment depth: 65 mm -Dimensions: 1700/600/H1080 mm -Weight: 118 kg

RAFFEL NH3 – 648 m² Brand:RAFFEL Type:NH3 – 648 m² Stock number:M23-2489 Cooling capacity:105 kW Application:Freezing Number of fans:Frieren Fin spacing:12 mm Defrost:Hot gas Refrigerant:R717 (NH3/Ammonia) Dimensions:4650 x 2250 x 5080 (5340) mm Number in stock:2 piece(s) Price:Quotation request Description: Nice Raffel Ammonia evaporator with 3 fans. Heat exchange surface is 648 m2. Visit our website: used-refrigeration

Tiller head, control panel, control unit, steering, steering unit -Manufacturer: Rapid, control panel steering completely from electric stacker RVT 2500 -Number: 1x drawbar available -Price per piece -Dimensions: 720/420/H180 mm -Weight: 14 kg/pc.

RAFFEL NH3 – 554 m² Brand:RAFFEL Type:NH3 – 554 m² Stock number:M23-2493 Cooling capacity:90.0 kW Application:Freezing Number of fans:3 Fin spacing:12 mm Defrost:Hot gas Refrigerant:R717 (NH3/Ammonia) Dimensions:4600 x 2000 x 5000 mm Number in stock:1 piece(s) Price:Quotation request Description: Nice Raffel Ammonia evaporator with 3 fans. Heat exchange surface is 554 m2. Visit our website: usded-refrigeration

Chassis, electric motor, DC motor, traction motor, drive motor -Manufacturer: Rapid, chassis drive motor faus electric stacker RVT 2500 -Drive motor::LS Leroy Somer type T15 24V 2.0 kW -Motor brake: Lenze -Individual components: see photos -Dimensions: 290/285/H700 mm -Weight: 76 kg

Chassis, support wheel, tandem cargo wheel, load rollers -Chassis: Tandem cargo wheel for pallet trucks, electric forklifts -Wheel: Ø 80 mm -Image/Dimensions: see photos -Number: 2x cargo bikes available -Price: per piece -Dimensions: 220/125/H80 mm -Weight: 4.2 kg

Face driver, face driver, face driver, driver tip, face driver, face driver -Manufacturer: WMW ABW Rapid, face driver -Type: MS4 / Rapid4 -Recording: MK4 -Quantity: 4 pieces available -Price: per piece -Front dimension: Ø 46 mm

RAFFEL NH3 – 378 m² Brand:RAFFEL Type:NH3 – 378 m² Stock number:M23-2491 Cooling capacity:60.0 kW Application:Freezing Number of fans:2 Fin spacing:12 mm Defrost:Hot gas Refrigerant:R717 (NH3/Ammonia) Dimensions:3900 x 1850 x 5060 mm Number in stock:1 piece(s) Price: Quotation request Description: Nice Raffel Ammonia evaporator with 2 fans. Heat exchange surface is 378 m2. Visit our website: used-refrigeration

Bending tool, die, upper knife, upper tool, straight tool -Tool: for press brake -Tool Angle: Radius 12.5mm -Dimensions: see the drawing in the photos -Dimension: 22 x 262mm -Length: 750mm -Weight: 32 kg

Heavy-duty roller, support roller, stop roller, guide roller, carrying roller -Heavy-duty roller: Stop roller, support roller, solid design -Roll:: Ø 85 x 100 mm -Hole spacing: 140 x 85 mm -Quantity: 7 rolls available -Price: per piece -Dimensions: 180/125/H135 mm -Weight: 7 kg/piece

RAFFEL NH3 – 276 m² Brand:RAFFEL Type:NH3 – 276 m² Stock number:M23-2492 Cooling capacity:45 kW Application:Freezing Number of fans:2 Fin spacing:12 mm Defrost:Hot gas Refrigerant:R717 (NH3/Ammonia) Dimensions:3200 x 1850 x 5160 mm Number in stock:1 piece(s) Price: Quotation request Description: Nice Raffel Ammonia evaporator with 2 fans. Heat exchange surface is 276 m2. Visit our website: used-refrigeration

Temperature controller, temperature sensor, temperature converter, temperature monitor, thermostat, flue gas thermostat, trace heating thermostat -Manufacturer: Raychem, thermostat with temperature sensor -Type: TRDR -Temperature range: - 0-15 °C / 0-15 °C -Dimension: 160/105/H55 mm -Weight: 0.6 kg

PLC control, central assembly, RAM, CPU, central device, central processing unit, compact device, compact CPU, processor -Manufacturer: mushroom, processor -Type: P10 CPU/RAM 304060 -Dimensions: 250/230/H40 mm -Weight: 1.3 kg

Tecnopool spiral cooler, model: TW650 Raffreddamento - type: TW 3 650 1491, 400 V, 3 Ph, 50 Hz, 60 A - north - south, plastic mesh belt - model: SX, number: 2PO400066 - tape width: 630 mm - product height: 100 mm - insertion height: 1000 mm - exit height: 4500 mm, 25 floors - 2 Alfa Laval evaporators - 3 fans each - model: ILBWH632GD - serial number: AA2257461 - year of production: 2011 - overall dimensions: 8400 mm x 5300 mm x 5300 mm - total length of the belt 422 m DISMANTLED

Semiconductor relays, switchgear, switching components -Manufacturer: opto 22 electromatic, Semiconductor relays, 7 pieces with heat sink -Type: 6x opto 22 480D45-12 / 1x electromatic RA4425-D08 -Price/Sale: complete -Dimensions: 300/200/H70 mm -Weight: 3.4 kg

Semiconductor relays, switchgear, switching components -Manufacturer: opto 22 electromatic, Semiconductor relays, 7 pieces with heat sink -Type: 5x opto 22 480D45-12 / 1x Gavazzi RA4450-D08 -Price/Sale: complete -Dimensions: 300/200/H70 mm -Weight: 3.4 kg

Condition: Very good condition

Offer via gebr. overhauled pipe cutting and chamfering machine Fabr. Georg Fischer / Orbitalum Type RA8 Year of construction 2007 Specifications: Tube Outer Diameter 124-230mm (4" - 8") Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 150 - 270 rpm. Electronic speed levels 1 - 6 Power 1600 W incl. mounting plate, assembly table used, in good condition.

Busch Vacuum pumps Three vac pumps, models: RA0255 / WV0500 / RA0250, can be bough as a package or individually

chiller, chiller Emicon RAS 801 S KP YOC 2018 80 Kw cooling capacity 22.8 Kw. Electrical Power, Amp. 62 Refrigerant R290 Weight 1.106 kg.

chiller, chiller Emicon RAS 601 S KP, , 60 Kw cooling capacity , 17.7 Kw. Electrical Power, Amp 51 YOC 2018 Refrigerant R290 Weight 1.062 kg.

Bending tool, die, lower tool, die tool, folding tool, press tool, forming tool -Die tool: forming tool / press tool clamp press tool -Receptacle: Ø 40 mm -Profile: Radius 20 mm -Dimensions: 140/46/H120 mm -Weight: 2.2 kg

Punching units, punching unit, punching bracket, punching tool, non-driven clinking and shearing units, forming bracket -Manufacturer: Raskin, punching bracket type 25 BL 160 -Throw: 110 mm -Punching capacity: 3mm -Matrix: Ø 43 mm -Dimensions: 225/60/H150 mm -Weight: 6.6 kg

Gripper feed for eccentric press, single column press, punching machine, single column eccentric press, eccentric press, single column press -Manufacturer: Raster, collet feed from punching machine type HR 60 NL-4S -Stroke: mm -Dimensions: see photos -Transport dimensions: 900/640/H620 mm -Weight: 200 kg

Atlanta tray forming and packing machine manufacturing year 2015 capacity 15 tray/minute 4 packs/tray in 3x4 for bottles 0.25L & 4 packs/tray in 2x3 for bottles 0.50L in neutral or printed carton Machine drive: Siemens S7 with touch screen panel Equipped with: infeed & outfeed conveyors machine in very good condition machine working with SMI Ref 135237.29 To be dismantled on site Available immediately

Bending capacity: Ø45 mm Bending angle: 0 - 180° Bending turret: 8-fold angle adjustment Mandrel length: 4000 mm Bending tools: 1x Ø 16 mm 2x Ø 17 mm 3x Ø 20 mm 2x Ø 27 mm 1x Ø 28 mm 2x Ø 30 mm Equipped with: - 4 Thorns - Mandrel retraction device Country of origin: Germany Motor power: 3 kW Machine LxWxH: 400 x 100 x 120 cm Machine weight: 1500 kg

Universal formwork Paschal Raster Universal formwork for foundations, walls, columns, beams, shafts, curves (polygons), landscaping construction, prefabricated elements. Versatile and flexible for use as manual and large-area formwork. Thanks to the modular principle, systemic formwork is very possible, even with complicated floor plans. The flat steel frames guarantee the robustness and durability of the formwork. Compatible with all PASCHAL systems. Connecting bolts as a universal fastener for all elements and accessories.

Gearbox, Angle Gear, Worm Gear -Manufacturer: Bonfiglioli, bevel gear from packaging machine ILAPAK Astra-STD -Type: RAN 20/SB -Translation: i = 1:1 -Shaft: Ø 20 x 50 mm -Direction of rotation: see photo -Dimensions: 240/210/H75 mm -Weight: 4.1 kg

RAFAMET KCI 320/400N CNC vertical turret lathe manufactured in 2011 in Poland, can perform complex production programmes on large-size workpieces, thanks to one turning head and three milling heads set at different angles. The machine, with its compact frame structure made of high-quality grey cast iron, is distinguished by its high geometric stability, high rigidity and excellent vibration damping. The CNC vertical turret lathe KCI 320/400N performs precision turning, milling, drilling and boring of cylindrical, conical and curved surfaces with the aid of the applied heads. One of them is a special milling head (offset), used to perform drilling and milling operations with the position of the tool axis offset from the spindle axis in a direction parallel to the slide travel plane. On the other hand, the turning head allows to mount CAPTO turning tools in horizontal and vertical socke ...

electric motor, three-phase motor -Manufacturer: Rüetschi, electric motor type RAF 90 L-4/2 -Power: 1.5/2 kW -Speed: 1400/2800 rpm -Shaft: Ø 22 x 40 mm -Design: B5 -Dimensions: 325/215/H180 mm -Weight: 15.3 kg

Offer 23317 Specifications: - Max. working width 2040 mm - max. material thickness at 40 kp / mm², strength 3.5 mm - Bending angle adjustment electronically pre-selectable 0 - 135 ° - Smallest bending radius 1.25 x sheet thickness - Minimum inboard height 6 x sheet thickness - Automatic sequential control for a complete workflow - Operation via hand or foot switch - Maximum opening width / stroke of the upper beam 200 mm - Height adjustability - bending beam 80 mm - the lower beam 80 mm - Upper beam drive 400 V / 1.1 kW - Bending beam drive 400 V / 1.5 kW - Manual backgauge can be operated from the front - Space requirement approx. W 3300 x H 1350 x D 1500 mm - Weight approx. 2600 kg

Ingersoll Rand D480IN-A Refrigerated air dryer 2020, 1.73Kw, coolant R407C-1, ambient temp +2/50'C, 1Ph

Ingersoll Rand D480IN-A Refrigerated air dryer 2011, 1.73Kw, coolant R407C-1, ambient temp +2/50'C, 1Ph