133,691 used machines on RESALE, but how to find them? Machine Search
WITH EMBOSSING UNIT FROM ABOVE AND BOTTOM S. No.: 5950798 Equipment / Additional information: With heating Also very interesting for the textile industry
Lift table work table HANEU Make HANEU Transporte Solingen Type HAT 500 Machine No. 235423 Year of manufacture 1996 Load capacity 500 kg Platform size 1150 mm x 610 mm Lifting height 700 mm Video test run
A Linde electric forklift truck in need of repair is offered. Weight: 2250kg. The battery is in good condition and the forklift truck is operational. The lift control is defective and the sideshift has been fixed in position. An on-site inspection is possible.
Lifting kneader extendable Kemper Model: F 100 ASL for max. 160 kg dough/TA 160 (rye mixed bread dough) Stainless steel kettle 240 litres Dough machine with flour dust hood according to HACCP 2 tank cars Stainless steel kneading arm 2 gears, with protection circuit with timer DGUV V3 tested Connection 400V, 16A-CEE plug Used machine overhauled with 6 months warranty + Spare parts service Option: Delivery & Floor Fastening Maintenance contract E-Box Service Package Instruction & Commissioning Many more lifting kneaders in stock!
\" General Description Curtain-side rigid cargo truck manufactured by Iveco , model Eurocargo 160-280 . Configured for commercial freight and distribution transport with curtain-sided body and rear hydraulic tail lift. Technical Details Manufacturer: Iveco Model: Eurocargo 160-280 Machine type: Curtain-side cargo truck First registration: 27/07/2017 VIN: ZCFA71MM202668639 Fuel: Diesel Power: 207 kW (approx. 280 HP) Emission standard: Euro VI Axle configuration: 4×2 Transmission: Manual Gross vehicle weight: 16,000 kg Odometer: 820,022 km Operating hours: 13,169 h Curtain-side / tarpaulin cargo body Dhollandia DHLSU11 hydraulic tail lift Tail lift capacity: 2,000 kg Tail lift platform height: 2,650 mm Tail lift load centre: 1,000 mm Condition Used commercial condition with wear consistent with age and mileage. Equipped with a new cardan shaft including new beari ...
Diosna dough machine Model: S 20 Stainless steel boiler for max. 20 kg dough Flour dust hood with protective circuit 3 gears with timer Kneading arm newly coated Machine mobile with locking foot DGUV V3 tested E-system NEW Connection 400V, 3 kW, 16A-CEE plug Used machine overhauled 3 months warranty Option: Service Package E-Box Maintenance contract Instruction & Commissioning Many more lifting kneaders in stock!
Lift-tilt system height: 8,20m. Tilt system inlet dimensions: 1100 x 1200 x 1750mm Euromorm.
Diosna HK224 Lifting tipper for Diosna SP240AD / SPV240AD boiler - Manufacturer: Diosna - Type: HK224 - for Diosna SP240AD and SPV240AD boiler - Load capacity 600Kg - Year of construction 2009 - With boiler scraper - with boiler drive - 400V / 50Hz - 1.7 kW Metrics: Height approx. 405cm Dumping height approx.: 220cm
S. No.: J21032541-1/354 Equipment / Additional information: Load: 2500 kg
Control: Siemens SIMATIC PANEL, connected load: 28kW, an on-site inspection is possible.
Manufacturer: Translift, Year: ca.1995, Lifting power kg: 800, Length mm: 1300, Width mm: ca.850, Lifting hight approx. mm: ca 800, Total hight mm: 60, Pedal switch: yes, Hand switch: no, Sicherheitsleiste: yes, Carriage: no, Ausparung für Zinkenbreite 200 mm, Year :ca.1995
Manufacturer: Clark Gabelstapler, Type: CGP 25, Year: 1999, Drive type: Gas, Construction type: Frontstapler, Lift mast type: normal, Fork length in mm: 1250, Operating hours: 3414-7, Lifting power kg: 2500, Lifting hight approx. mm: 3300, FREE TEXT: Seitenschieer, Year :1999
Manufacturer: Hydraulikhubtisch, Year: ca.1995, Lifting power kg: 2000, Length mm: 3200, Width mm: 1400, Lifting hight approx. mm: 1800, Total hight mm: ca 450, Hand switch: yes, Year :ca.1995
Manufacturer: Yale, Type: GLP30VX V2395, Year: 2010, Fork length in mm: 1200, Lifting power kg: 3000, Lifting hight approx. mm: 3505, Total power kW: 38, Wight approx. kg: 4250, Year :2010
Vemag vacuum filling machine with lifter for 200 liter meat bins, model: 2000 DC, type: 132, number: 1320154-1, 380 V, 3 Ph, 50 Hz, 42 A, dimensions: 2200 mm x 1300 mm x 2400 mm.
; Gross weight [kg]: 2160; Inspection Date: 2026-09-02; Amount of previous owners: 1; Lift height[mm]: 800; Maximum lift capacity [kg]: 230
Manufacturer: Unbekannt, Year: ca.1990, Lifting power kg: ca.3000, Length mm: 5000, Width mm: 1200, Lifting hight approx. mm: ca.1200, Total hight mm: 400, Safety strip: yes, FREE TEXT: Maschine wird gereinigt Lackiert Steuerung erneuert, Year :ca.1990
Manufacturer: Linde, Type: E 30-02, Year: 2004, Drive type: elektro, Lift mast type: Duplex, Total hight mm: 2300, Fork length in mm: 1300, Operating hours: 5463,5, Lifting power kg: 3000, Lifting hight approx. mm: 3640, FREE TEXT: Kabine/Joystick steuerung/Sitzheizung/Heizung/Gabelverbreiterng/Ladegerät/Verfügbark eit, Year :2004
Manufacturer: Rapid, Type: Kettenstemmer, Year: ca.1980, Min.-max. workpiece height in mm: 200-1200, Vertikal moulding unit: 1, Motor kW: ca.1,0, Travel top to down mm: 150, Travel longitudinal mm: ca.300, Max door width mm: 1200, Max. mortise hole dimensions L X W X D mm: 150 X ca.300, Drill spindles: 1, Face plate aggregate: no, Key hole boring aggregate: no, Year :ca.1980
Manufacturer: Trepel Hebebühne, Type: EH 40/13/1, Year: 1999, Lifting power kg: 3500, Length mm: 5000, Width mm: 1100, Compressed air bar: 155, Wight approx. kg: 1400, Year :1999
Manufacturer: Trepel, Type: EN 10/10/0, Year: 2002, Lifting power kg: 1000, Length mm: ca 1400 , Width mm: ca 800, built-on roller conveyor: no, Year :2002
; Gross weight [kg]: 4080; Inspection Date: 2026-09-01; Amount of previous owners: 1; Lift height[mm]: 1015; Maximum lift capacity [kg]: 450
Manufacturer: Hebebühne, Lifting power kg: 3000, Length mm: 4000, Width mm: 1250, Total hight mm: ca.400, Safety strip: yes, built-on roller conveyor: no, Total power kW: ca.3,
Manufacturer: Framar, Bauyeshr : 1992, Control: hand, Work stations: 1, Vertikal moulding unit: yes, Motor Kw: 3, Travel top to down mm: 120, Travel longitudinal mm: 275, Max door width mm: 1000, Max. mortise hole dimensions L X W X D mm: 20 X 75 X 110, Min. mortise hole dimensions L X W X D mm: 2 X 20 X 35, Automatic clamping system: yes, Incl. stopper system: yes, Trench deepth max mm: 110, Lifting device: yes, Wight approx. kg: 900, Year :1992
Cross transport trolley for rails + scissor lift table with castors Brand: WTT Length 3000mm
equipped with scales Auction-ID: A1-49836-50
Used Lifting Kneader KEMPER, Type: F125 ASL -Refurbished- - for 200 kg dough / 125 kg flour - Incl. 1 tank car - 2 speeds -Timer - All wear parts renewed (bearings, belts, etc.) - Condition: Very good, overhauled, ready for immediate use - 6 months warranty Visits and test runs are possible by arrangement.
equipped with detachable filling spindle Auction-ID: A1-49836-66
Working. Can be loaded. Auction-ID: A3-46156-6170
Step conveyors, step lift conveyors KÖBERLEIN & SEIGERT Type A 400 / 2000Feeding technology, feeding system, incline conveyors, inclined conveyors, steep conveyorsFabr. No.03-3964 Year of construction 2003Slide width 400 mmSlide thickness 40 mmConveyor stages 10 piecesTransfer height on the incline conveyor 2200 mmTransfer height on the side of the feeder 1800 mmFilling height 750 mmConveying slope 75Motor power 1.5 kWMotor speed 1450 rpm. Mains connection 400 volts, 50 Hz- Low-wear sliders- Electromechanical drive-
table length: 1300 mm table width: 800 mm stroke height: 1010 mm weight max. in kg: 2000 kg : 190 mm connected load frequency: 400 V total power requirement: 0,75 kW stroke speed - idle stroke upwards: 40 sek. stroke speed - idle stroke downwards: 30 sek. weight of the machine ca.: 0,28 t dimensions of the machine ca.: 1,3 x 0,8 x 0,23 m The hydraulic lifting tables are electrically driven and operated. Have a contact strip for safe lowering operation. Wide applicability for workshops, assembly departments, loading pits, etc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Type: SWE140 Maximum lifting height: 3655 mm Maximum lifting capacity: 1400 kg
Lifting capacity: 100 Kg Magnetic field: 70 x 60 mm weight: 5 Kg dimensions: 100 x 120 x 120 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Lifting capacity: 1000 Kg Magnetic field: 258 x 176 mm weight: 0,031 t dimensions: 0,26 x 0,18 x 0,16 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Auction-ID: A1-50026-45
Lifting capacity: 600 Kg Magnetic field: 228 x 122 mm weight: 0,022 t dimensions: 0,23 x 0,122 x 0,112 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Auction-ID: A1-40311-167
Lifting capacity: 1500 Kg Magnetic field: mm weight: 0,045 t dimensions: 0,44 x 0,22 x 0,25 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
100 € 
