134,068 used machines on RESALE, but how to find them? Machine Search
Works Information: the refusal of the technical inspection was a problem with the renewable label that has been changed since see photo Auction-ID: A3-46155-35542
Upper deck, lower deck and goggles. Auction-ID: A3-46155-21785
Overall length: 2261 mm Total height: 1600 mm Auction-ID: A1-49964-20
Performance range: 20mm-60mm, max. bending angle: 180°+10°, max. bending radius: 150mm, effective length: 3048mm, bending height: 1050mm, max. section modulus: 12.1cm³, bending tolerance: +/-0.1°, operating pressure: 200bar, connected load: 4kW, machine dimensions X/Y/Z: approx. 2000mm/900mm/1200mm, weight: approx. 500kg. Documentation available. On-site inspection is possible.
Auction-ID: A1-40311-27
tube diameter: 28 mm wall strength: 2 mm bending radius min.: 90 ° Control: 3D TubeSoft Slim total power requirement: 3,5 kW weight of the machine ca.: - kg dimensions of the machine ca.: - mm Description: Round tube steel (S235): 60.0 x 6.0 mm Round tube stainless steel (S 355): 60.0 x 4.0 mm Square tube steel: 50 x 50 x 4.0 mm Rectangular tube steel: 60 x 40 x 2.0 mm max. usable length: 3048 mm Bending speed: 10°/sec including tools (see photos) Mandrel is no longer available, can be retrofitted The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Battery of 2019 Auction-ID: A1-40311-136
Packaging line for the production and packaging of wet wipes, e.g. hygiene wipes, cleaning wipes, baby wipes, disinfecting wipes. The production process includes unwinding of the nonwoven from the jumbo roll, slitting for a 2-lane production process (until packaging), dipping into liquid, longitudinal folding in Z- or W-fold, cross cutting (tissue length), 1 x cross folding, stacking, continue to packaging unit which handles film feeding and wrapping wet wipes, punching the hole (to open the pack), positioning of reclosable label, bag cutting/heat sealing. Integrated splice units increase efficiency during material, film and label role changeover. - Specifications: suitable for dry nonwovens (airlaid, spunlaid) | folds: Z or W shape (change of folding tool necessary) | fold face adjustable per side | dimensions of folded tissue: L(70-100)xW(40-100) mm | dimensions of unfolded tissue: L(1 ...
Packaging machine for the production and packaging of wet wipes, e.g. hygiene wipes, cleaning wipes, disinfection wipes. The production process includes folding and cutting the wipes, moistening with one or more different liquids, packaging the wet wipe in a 3-side sealed or 4-side sealed pouch. Production of up to 4 chain bags possible. Included is a dosing pump, a perforating tool, a tear notch tool, 2 character sets for cold and hot printing (14 characters each), an outfeed belt (1,2m). SIEMENS PLC and Touch-Monitor. - Specifications: Bag sizes: L(50-125)xW(50-110)mm | suitable films: PET, OPP,BOPP ,AL, PE, CPP, laminated films | suitable for dry nonwovens (airlaid, spunlaid) | folds: max. 10 folds vertically and 4 folds horizontally | size of tissue, unfolded:L(40-220)xW(30-240)mm | Grammage wet wipe: 30-80g/m? | max. roll diameter: nonwoven: 1000mm, film: 350mm | filling range liqui ...
• Manufacturer: Manitou • Model: MLT 737-130 hp • Vehicle type: Telehandler / Rigid telehandler • Year of construction: 2024 • Propulsion: Diesel • Engine power: 95 kW (130 hp) • Load capacity: 3,700 kg • Lifting height: 6,900 mm • Net weight: 6,750 kg • Vehicle length: 6,170 mm • Overall width: 2,390 mm • Mast type: Telescopic • Free lift: 1,500 mm • Fork length: 1,200 mm • Transmission: Torque converter with Powershift • Full cabin available • Air conditioning available • Heating available • 3. Hydraulic valve available • Front work lights available • Work lights available at the rear • Soot particle filter available • CE certificate available • Road legal / 40 km/h version • Pallet forks included • Operating hours according to the display approx. 34 h • Nameplates available • Engine compartment clean and ...
Packaging line for the production and packaging of wet wipes, e.g. hygiene wipes, cleaning wipes, baby wipes, disinfecting wipes. The line is constructed from a wet wipe production unit and a flow wrap unit. Wet wipes production process: Unwinding of the nonwoven from 2 jumbo rolls and slitting into 5 lanes per roll (until moistening) for a fast production method, longitudinal folding in Z or C-shape, moistening via several spraying nozzles, cross cutting (wipes length), stacking and forwarding to the packaging unit. The flow wrapping unit handles: feeding the wet wipes, feeding the film and printing (hot stamping), hole punching (to open the pack), positioning the reclosable label and e.g. a seal label (the integrated 2-lane labeler allows offset labeling), bag cutting/heat sealing. The liquid supply system for moistening the wipes consists of 2 tanks with continuously mixing agitators ...
Packaging line for the production and packaging of wet wipes, e.g. hygiene wipes, cleaning wipes, baby wipes, disinfecting wipes. The line is constructed from a wet wipe production unit, a flow wrap unit and a unit for applying the reclosable lid. Wet wipes production process: Unwinding of the nonwoven from 2 jumbo rolls and slitting into 5 lanes per roll (until moistening) for a fast production method, longitudinal folding in Z or C-shape, moistening via several spraying nozzles, cross cutting (wipes length), stacking and forwarding to the packaging unit. The flow wrapping unit handles: feeding the wet wipes, feeding the film and printing (hot stamping), hole punching (to open the pack), positioning the reclosable label and e.g. a seal label (the integrated 2-lane labeler allows offset labeling), bag cutting/heat sealing and feeding to the lidding unit. The liquid supply system for mois ...
Year of construction 2020 manual bookbinding machine Table model for manual operation Delivery date: short-term Price on request. We supply and install worldwide.
Equipped with outriggers, HMF RCL 5300 crane Auction-ID: A1-47416-5
Stock number: DT055, In stock: Yes, Amount in stock: 2 pcs., Item: Tablet compressing machine, Theoretical capacity: 760-1520 pcs/min., Stations: 27 pcs. for two-layertablets, Tablet size: Ø 15,8 mm., Working pressure: 6,5 ton., Manufacturer: Manesty, Type: BB3B, Other: The machine has been renovated
Wheel Balancing Mandrel JONES - SHIPMAN to suit taper flanges, Model 540, Model 1400, Information about technical data are not binding., Machine available subject to prior sale.
Basket size LxWxH:550 x 300 x 350 mm No. of washing chambers:1 No. Of tanks for washing:1 Temperature for washing water:60 °C Ultrasonic cleaning unit with high alloybasket - Ultrasonic frequency 28 kHz - automatic breakdown for heating and ultrasonic for low level water
pressure capacity max.: 80 t Stroke: 500 mm table surface area: 960 x 810 mm spindle pitch: 72 daylight between the columns: 950 / 540 mm passage: 640 mm machine weight ab.: 4500 kg dimensions of the machine ca.: 2,0 x 2,0 x 3,85 m Hydraulic quick adjustment 500mm Flywheel Ø2000mm 4 prism bases for straightening waves different support frames The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manuelle Heftmaschine / Manual Stapler Nagel ENAK 50 Serial-No. 7005
A filter and recovery system with filling and intermediate shaft and a new control system as peripheral equipment for the production of technical nonwovens and felt is available. Components: Fan, three-phase motor WN 1 8030 T.50, condenser Erko, separator (exhauster) Erko, filling shaft, intermediate shaft. Control cabinet dimensions X/Y/Z: approx. 1200mm/600mm/2200mm, weight: approx. 300kg, year of construction: 2023, total system dimensions X/Y/Z: approx. 3150mm/1100mm/3700mm. Documentation available. On-site inspection is possible.
SAOMAD Window Machining Center - CE Compliant Composed of: TENONING SE 3 A year 2005 Complete with: - Trimming unit Motor power kW 3 Blade diam. 400 mm - Tenonare group Motor power kW 9.2 Shaft length 320 mm Max tool diameter 350 mm Roll forming machine PS1ASX year 2005 Complete with: - N° 2 profiling shafts Motor power kW 7.5 (each) Shaft length 320 mm Max tool diameter 240 mm - Hardware radius unit Motor power kW 2.2 - Batten recovery unit Motor power kW 2.2 Max tool diameter 200 mm - Hardware group Motor power kW 3 Max tool diameter 180 mm - N°1 left profile shaft Motor power kW 7.5 (each) Shaft length 320 mm Return of parts
Semi-automatic bending, pipe bending machine, mandrel bending machine MOBITEC type BAH 1-2KOTTMANN and BERGER GmbHFabr. No. 056 Year of construction 09/2004- for simultaneous bending of two pipe sections made of steel up to 12 mmBending angle max. 90Pipe diameter max. 12mmMandrel length approx. 65 mmNominal power 3.5 kWDreturn air max. 6 bar / approx. 1 litre per bending cycleMains connection 400 volts, 50 Hz- Pneumatic clamping- Pneumatic mandrel retraction- Control for angle input via STOBER Controlbox Series 4000/5000- Control SIEMENS
Handling device, handling system JÄGER HANDLINGManipulator for screwdriving technologyType: Handy-flex 200Horizontal movement: 450 mmVerticate movement: 600 mmLoad capacity: 4 to 10 kgThroat: 150 to 600 mmGuide column vertical: 25 mmGuide columns horizontal: 16 mmTool holder: 33 x 33 mm Screw clamping- Movable in three axes (horizontal, vertical, rotatable)- Rotary encoder KÜBLER for rotary movement type 8.5873.5320.B311. S003 - Displacement transducer BALLUFF for horizontal movement type BTL6-A110-M0450-A1-S115 - 2 pieces of balancer for horizontal movement
Handling device, handling system JÄGER HANDLINGManipulator for screwdriving technologyType: Handy-flex 200Horizontal movement: 300 mmVertical movement: 370 mmLoad capacity: 10 to 14 kgProjection: 250 to 550 mmGuide column vertical: 25 mmGuide columns horizontal: 16 mmTool holder: 26 mm oval with screw clamping- Movable in three axes (horizontal, vertical, rotatable)- 1 piece balancer for vertical movement TECHNA, type 9340, adjustment range 10 to 14 kg- Adjustable latch for the Vertical movement, manual unlocking via
Manual Pipe Bending Machine, Pipe Bending Machine, Mandrel Bending MachineHand Pipe Bending Machine, Hand Wire Bending Machine, Bending MachineManufacturer: MEWAGing Power: max. 16 mm1 piece bending tool 15 mm with 25 mm bending radius1 piece bending tool 10 mm with 16 mm bending radius1 piece bending tool 8 mm with 9 mm bending radius1 piece bending tool 6 mm with 8 mm bending radius1 piece bending tool 5 mm with 8 mm bending radius- Turning plate with degree marking- Scope of delivery as shown- Wooden box for storageDimensions L x W x H: 570 x 480 x 145
Load capacity: 1450/1125kg, load center: 600mm, lift height: 3200/4900mm, battery weight: 300-350kg, free lift: 900mm, mast height lowered: 2100mm, mast height extended: 4900mm, reach: 590mm, ground clearance under mast: 80mm, ground clearance at axle center: 50mm, track width: 1292mm, frame cross-section: 1058mm, front overhang: 655mm, wheelbase: 1120mm, rear overhang: 175mm, side shift: 80mm left / 80mm right, lost load thickness: 880mm, fork tilt back: 3°, fork tilt forward: 3°, min. turning radius: 1350mm, support arm height: 282mm, support arm length: 530mm, maximum speed: 6km/h, gradeability: 5%, battery capacity: 24V/270Ah, fork dimensions: 35x100x1070mm, front wheels (polyurethane): OD 200mm / width 50mm, rear wheel (solid rubber): outer diameter 250mm / width 75mm, AC drive motor: 24V / 2.5kW, AC pump motor: 24V / 5kW, rated power: 2.5kW, width: 1512mm, length: 1950mm, net wei ...
Stock number: DT083, In stock: Yes, Amount in stock: 1 pc., Item: Tablet compressing machine, Theoretical capacity: 260 - 520 pcs/min., Stations: 16 pcs., Variable speed: Yes, Tablet size: Max 25 mm., Dimensions: L 950 x W 950 x H 1850 mm., Manufacturer: Manesty, Type: D3B, No: 7 D 174, Documentation: Yes
pressure: 1000 kg throat: 95.0 mm table length: 120 mm table width: 120 mm total power requirement: manuell kW weight of the machine ca.: 17.0 kg dimensions of the machine ca.: 270 x 130 x 330 mm Description: - For pressing in and out bearings, bushings, etc. - Made of torsion-resistant steel - Includes mounting holes, ideal for mounting on a workbench - Suitable for bushing removal, straightening, bending, reaming, etc. - Adjustable lever bar, depending on the required force - Ideal for repair shops and general workshop use The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Roby junior semi automatic casemaker suited for 3 piece cases format 50x70 cm light table for spine hot animal glue 2 sides turning in unit
A mandrel tube bending machine Sommer is available. Tube diameter range: 15mm-65mm, tube feed length: 3000mm, max. bending radius: 150mm, chuck: 200mm, tube clamping: hydraulic. Including accessories. Documentation available. An on-site inspection is possible.
A Roll-o-Matic bag production line for bottom-sealed film bags is available. Bag length range: 360mm-1800mm, max. bag width: 860mm, max. production speed: 90m/min, max. cycle rate: 230/min, material: PE LD/PP, max. film thickness: 70µm. Machine dimensions: approx. 4100mm/1600mm/1700mm, weight: approx. 1600kg, control system: Siemens PLC. Documentation available. On-site inspection possible.
NEW, 200 cm width, 493 kg weight, 1.75 m³ capacity, suitable for Manitou attachment, Also other recordings such as Atlas, Avant, Bobcat, Cat, Claas, Deutz Fahr, Dieci, Faucheux, Genie, Giant, Hercules/Everun, JCB, John Deere, Kramer, Liebherr, Mailleux, Manitou, Merlo, Mustang, New Holland, Paus, Schäffer, SMS, Terex, Volvo, Weidemann, Zettelmeyer available!
NEW, 250 cm width, 2.15 m³ capacity, 585 kg dead weight, with Manitou attachment, Also other recordings such as Atlas, Avant, Bobcat, Cat, Claas, Deutz Fahr, Dieci, Faucheux, Genie, Giant, Hercules/Everun, JCB, John Deere, Kramer, Liebherr, Mailleux, Manitou, Merlo, Mustang, New Holland, Paus, Schäffer, SMS, Terex, Volvo, Weidemann, Zettelmeyer available!
NEW, FEM3A, 4.5 t load capacity, with 120 cm long tines, with Manitou attachment, 246 kg dead weight
BIG volume bucket 240 cm with JCB Q-Fit attachment, - Construction year: 2025, - working width: 240 cm, - own weight: 351 kg, - capacity: 1.01 m3
NEW, Width: 240 cm, Capacity: 0.82 m³, Weight: 284 kg, with Manitou mount
used
Recon Part Number: 550 140 26 09 B1 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!
used
Recon Part Number: 550 140 31 09 B2 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!
used
Recon Part Number: 550 140 30 09 B3 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!
maximum number of results exceeded
please refine your search
3.500 € 
