128,345 used machines on RESALE, but how to find them? Machine Search
BIG volume bucket 240 cm with JCB Q-Fit attachment, - Construction year: 2025, - working width: 240 cm, - own weight: 351 kg, - capacity: 1.01 m3
Internal number 8511 Auction-ID: A1-46329-25
NEW, 240 cm width, 1.01 m³ capacity, with Manitou attachment, 351 kg dead weight, with 11 teeth
NEW, Width: 240 cm, Capacity: 0.82 m³, Weight: 284 kg, with Manitou mount
SML Heavy-duty tipping bucket 240cm with Manitou mounting, - Self-weight: approx. 443 kg, - Volume: 1.56 m3
Equipped with: Hook lift system, 6x4 double air, climate control, cruise control, navi/cd/cd. Electric driver's seat; air suspension and heated, electrically operated steering wheel, 2 axles rear air suspension, rear axle steering, Auction-ID: A1-42015-13
Internal number 5665, platform height: 14.85 m, swivel range: +/- 175°, climbing ability: 22%, transport position LxH: 5.23 x 2.23 m, movable up to working height: 16.85 m, wheel pressure max.: 38kN, ground clearance: 0.12 m, drive type: battery, special features: rotatable work cage, cage boom rotation angle +/- 70°, white tires, note: hydraulic hoses for transport position defective. Crane loading required, costs on request, a low-loader with its own ramps is mandatory for collection! Auction-ID: A1-46342-61
Mec 2047ES Scissor Lift 4 x new Crown Deep Cycle lead-acid batteries CR-225 HD (as of 06.10.2023) Brand: MEC Model: 2047ES Type: Scissor Lift Year of construction: 2006 Working height max. 8.10 m Platform height max. 5.98 m Platform height – retracted 1.62 m Platform extension 0.91 m Platform width – outside 1.15 m Platform length - outside 2.31 m Platform length - extended outside 3.39 m Railing height 1.10 m Height of skirting board 0.15 m Height – retracted: Folding railing 2.10 m Height – retracted: railing folded down 1.62 m Length - retracted 2.51 m Length - with extended platform extension 3.33 m Width 1.19 m Achievement Max. people on the platform (indoor/outdoor) 2/2 Load capacity 567 kg Load capacity - platform extension 113 kg Movable up to a height of 5.98 m Travel speed - retracted 4.0 km/h Travel speed - extended 1.0 km/h Gradea ...
Hydraulic lift table / scissor lift table Manufacturer: Gruse Maschinenbau GmbH & Co. KG, Aerzen Type: ELS 2-13-10 Factory No.: 76067 Year of construction: 2008 CE: available Equipment: • Robust industrial design • Mechanical fall protection • Hydraulic power unit mounted on the side• Emergency stop switch • Bolted, replaceable clamping plates • Warnings and safety instructions available • Load capacity: 2,000 kg • Net weight: approx. 780 kg • L ...
Vacuum lifter, vacuum lifter from Schmalz for heavy plates with new suction rubber Load capacity 150kg horizontally and vertically Vacuum cleaner can be swivelled 90 degrees motorised Suction box 1000 x 675mm Acoustic warning signal in case of too low vacuum 400V, 1.5kW Can be attached to on-site chain hoist CE mark No test book available Vacuum cleaner rubber renewed Mint condition The machine can be demonstrated on site by appointment. We offer only machines that are ready for demonstration in our warehouse, see "other offers of this year". provider".
Hydr. Scissor lift table WEIDMANN type E5/13-1Fabr. No. 30403339 Year of construction 1982 / 2007Load capacity 500 kgPlatform size 2000 x 1200 mmStroke max. 1280 mmOverall height - table bottom 290 mmOverall height - table top max. 1570 mmTable height with safety support 1430 mmLifting speed 1280 mm in 25 sec. Lowering speed 1280 mm in approx. 0 to 15 sec. Hydraulic operating pressure approx. 130 barEngine power 1.5 kWNex connection 400 volts, 50 Hz.- Rotary switch switch on the hydraulic power unit for up and down lowering speed
Hydraulic scissor lift table GRUSE type ELS 0.5-8-1-G-SOFabr. No: 124984 year of construction 2017Load capacity 300 kgPlatform size 1250 x 800 mmUsable stroke max. 785 mmOverall height - table bottom 345 mmOverall height - table top 1130 mmEngine power 0.8 kWNet connection 400 volts, 50 Hz- Foot switch for up and down, with emergency stop and key switch for control One- Single scissors with a lifting cylinder- Circumferential safety contact strip with limit switches under the upper frame- Adjustable limit switch for the upper stroke restriction-
SML heavy-duty dump bucket 240cm with Merlo ZM2 mount, - Net weight: approx. 443 kg, - Volume: 1.56 m3
a hydraulically operated lifting module with a load capacity of 250 kg, for ergonomic lifting of lighter loads Auction-ID: A1-45977-16
Auction-ID: A1-45977-15
Material: Polyester. Includes: (1x) plastic container. Auction-ID: A1-45979-63
With matching spoons of 1.80m. In good working condition. Lifting capacity 3.5 tons. Auction-ID: A3-43520-6044
• Make an appointment for the viewing day via hollandshoeve@solcon.nl • April 3, 2026 from 09:00 to 12:00 Auction-ID: A1-42015-250
Viewing day by appointment Battery 2023 Auction-ID: A1-43890-12
Internal number 558 Auction-ID: A1-46329-16
Internal number 2522 Auction-ID: A1-46329-20
Internal number 2588 Auction-ID: A1-46329-41
Internal number 2522 Auction-ID: A1-46329-40
HydraLift FX is an advanced aesthetic device that offers non-invasive lifting and skin revitalization. Auction-ID: A7-46406-11
Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/RjFS2NQ29J4 - Former Linde full-service device - valid service until 03/2027 - UVV valid until 03/2027 - Battery: 09/2014, 24V Ah, good performance measured with 24.7V - Initial lift - lifts 2 pallets at the same time / good ground clearance for uneven floors - Integrated scale Auction-ID: A1-45451-333
Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and condition video: https://youtu.be/mC3Ktrhu2oE - Former Linde full-service device - Service valid until 03/2027 - UVV valid until 03/2027 - Battery: 06/2021, 24V 3PzS 375Ah, very good performance measured with 24.9V - Initial lift - lifts 2 pallets at the same time / good ground clearance for uneven floors Auction-ID: A1-45451-364
Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/BeUnCendmDs - Former Linde full-service device - Service valid until 02/2027 - UVV valid until 02/2027 - Battery: 08/2021 24V 3PzS 375Ah, very good performance measured with 25.3V - Initial lift - lifts 2 pallets at the same time / good ground clearance for uneven floors Auction-ID: A1-45451-306
Internal number 3717, Platform height: 13.45 m, Lifting capacity on extension: 750 kg, Drive type: Battery, Platform length extended: 6.02 m, Height transport position without railing: 2.26 m, Movable up to working height: 15.45 m, Ground clearance: 0.16 m, Indoor use only: no, Special features: white wide tires, high lifting capacity, large platform, a low-loader with its own ramps is mandatory for collection! Auction-ID: A1-46342-60
Auction-ID: A1-46501-2013
Auction-ID: A1-46501-2016
Auction-ID: A1-46501-2995
We offer all types of screw manufacturing machines M3 - M25 -A href=inchabc://abc.steinfels-kg.de/sale/screws/inch>all information about the machine please click here
We can offer you all types of screw making machinery for M3 - M25
Make Wafios / MRP / Vitari Various machines available! Diameter areas 2 - 45 mm
We offer all types of Wafios wire pin presses from S25 - N90
new
new
Used exhaust manifold by the Jenbacher 312 Both manifolds have gone to the end
Manual Edger Esterer EWD DKV with task table good condition ! Immediately available !; Well
Bos Machine (BMH) with a Sapiens Wood We are a producer of frames, windows and doors and we sell the machine ourselves. The machine has been running in our factory from 2006 to 2022 (16 years). This is a Bos Machine (BMH) with a Sapiens in front of it. The Sapiens is a CNC machine with one robot head and one regular axis. He then proceeds to the tenoning bench (for the crosscut processing). The first shaft is a saw followed by 3 vertical shafts (approx. 500mm long) and behind them two more motors for round edges on the wood. Then he moves on to the milling. The first cutters profile the edge finish and the second cutters profile the inner profile. The first milling cutters consist of 1 milling cutter which profiles and immediately makes the wood thickness, followed by 4 milling motors and then another 5 milling motors for profiling the inner profiling. Technical status: The machine is ...
1 of un-used! column-mounted, industrial manipulator / lifting device (balancer), make Dalmec, type Posifil PFC, new 1998. Standard column 2.300 mm tall. Designed for a maximum lifting load of 30 kgs. Maximum radius 3.000 mm. Vertical stroke 1.500 mm. With special gripper designed to lift, lower and tilt products approx. 45 degrees. Assumed application was handling storage bins 470 x 350 mm (pictures show example only, not necessarily the exact product handled). Could of course be used for various products. Width and depth of gripper can be adjusted. CE-marked but no operating manual available. Pneumatic diagram and spare parts list in German available. Two identical balancers available. Visible mobile foot-plate NOT included (used for our own internal transport and demo purposes).
Te Koop: Manifold Tuchenhagen Mixproof valve. 1.5 duims en 3 aaansluitingen.
Te Koop: Tuchenhagen manifold, Mixproof valve. 2 duims en 2 aansluitingen.
- Intake Elbow mixture line MWM 12300231 - Please note! Price per piece! - 12300231 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new technologies and pr ...
ID3182 2 piece Strödter Vigomat VP 250-2,5 year/Year of construction 2013 articulated manipulators, pneumatic power supply Load capacity 240 kg Max. Max. load torque on load handling attachment 1200 Nm Max. Horizontal working range: Radius R 3.7 m Max. Stroke: 1.45 m Max. Max. lifting speed: 0.8 m/s Type of attachment Pedestal Weight of device 755 kg Noise emission < 70dB Pneumatic working pressure 6 bar Max. Air consumption: max 40 NI /double stroke Diameter of main cylinder 200 mm Buckling manipulators, power supply pneumatic Load capacity 240 kg Max. load torque at the noise pick-up device 1200Nm Max. horizontal working range: Radius R 3.7 m Max. stroke: 1.45 m Max. lifting speed: 0.8 m/s Fastening type of pedestal Weight of the device 755 kg Noise level < 70dB Pneumatic working pressure 6 bar Max. air consumption: max 40 NI /double stroke Diameter master ...
maximum number of results exceeded
please refine your search
50 € 
