jlg man lift used for sale

Used mozzarella cheese production line. Line composition: 1. Cheese curdling tank. 2. DIMA cheese scalding and stretching device with a capacity of 400 kg/h. 3. Brine tank. 4. Cheese curd cooling tank. 5. Brine tank for packaging the mozzarella in brine. It's possible to supplement it with a device for forming cheese balls and blocks and a machine for packing cheese balls with filling.

A modified MECO internal keyway slotting machine is available. Keyway width range: 4mm-45mm, max. square keyway diameter: 36mm, max. hexagonal keyway diameter: 36mm. The machine was modified and can now slot square and hexagonal keyways. Documentation available. An on-site inspection is possible.

Table height: 850mm, probing error MPEp: 3.5μm, length measurement error MPEe: 3.0+L/250μm, machine height: 1845mm, electrical connection: four grounded Schuko sockets 220V with 16A protection, power consumption: max. 700VA, spatial temperature gradient: max. 1°C/m, regularly inspected, with computer. An on-site inspection is possible.

Key data: 57900 KW, 11000 V

Diesel Power Plant MAN 57.9 MW / 50 Hz – year 2014 This diesel power plant consists of three identical 19.3 MW MAN 18V48/60 TS diesel generating units with auxiliaries. The engines are 500 rpm turbo charged with intercooling and they are installed on base frame forming a wet oil sump for engines. Diesel generators have been operated only approx. 5000 hours since new. Alternators are ABB made synchronous generators which are air-cooled, and they have their own lubrication oil system installed on concrete foundation and connected to the engines with flexible couplings. Engines are cooled with two separate cooling circuits connected to radiator cooling system. The control system is MAN SaCoS One. 11 kV breakers are Siemens SF6 type. The plant is still installed and fully operational and in good technical condition. Main technical data Manufacturer: MAN Augsburg, Germany Manufa ...

Key data: 57900 KW, 11000 V

Diesel Power Plant MAN 57.9 MW / 50 Hz – year 2014 This diesel power plant consists of three identical 19.3 MW MAN 18V48/60 TS diesel generating units with auxiliaries. The engines are 500 rpm turbo charged with intercooling and they are installed on base frame forming a wet oil sump for engines. Diesel generators have been operated only approx. 5000 hours since new. Alternators are ABB made synchronous generators which are air-cooled, and they have their own lubrication oil system installed on concrete foundation and connected to the engines with flexible couplings. Engines are cooled with two separate cooling circuits connected to radiator cooling system. The control system is MAN SaCoS One. 11 kV breakers are Siemens SF6 type. The plant is still installed and fully operational and in good technical condition. Main technical data Manufacturer MAN Augsburg, Germany Manufa ...

Never used Three (3) units of used 6 MW gas turbine model: MGT6000 - Built in 2019, last preservation in 2021.

2001 4 Color Size: 740 x 1040 mm Perfecting 2/2-4/0 Impressions: 155 million APL - RCI 2 Chrome Impression cylinders Roland dampening DELTAMATIC All washing device Chiller Technotrans beta.d Powder Spray GRAFIX HITRONIC 3000 AIR GLIDE delivery Standard Equipment On stock Available: immediately Location: Europe

Manufacturer: Eurotherm Year of Manufacture: 2019 Type of Machine : Manual Wash Booth with Automatic Spray Ring Condition: Good, regularly maintained (once per year) Cabin Dimensions - Internal Width: 4,000 mm - Internal Length: 7,000 mm - Internal Height: 3,500 mm - External Width: 4,100 mm - External Depth: 7,100 mm - External Height: 4,100 mm (double base tray) Construction - Cabin Type: Closed - Exhaust Air: Extraction at end of cabin - Panel Thickness: 50 mm with polyurethane insulation - Inner Walls: Stainless steel AISI 304 (V2A) - Outer Walls: Galvanized sheet metal, painted - Steel Profiles: Blue RAL 5002 - Access Door: 1 door, manual 4-leaf type, 4,000 x 3,500 mm, Blue RAL 5002 Exhaust and Ventilation - Air Flow Rate: 10,000 m3/h - Fan Motor Output: 1.5 kW - Droplet Separator: Yes - Chimney: Included, height 6.5 m - Lighting: 8 LED fixtures Automatic Spray Ring - Max ...

The AM Manufacturing S300 Scale-O-Matic Combination Dough Divider Rounder is a commercial kitchen equipment designed for baking and dough preparation. This electric floor model, made in the United States by AM Manufacturing, combines dough dividing and rounding capabilities in a single machine. Perfect for restaurants and food service establishments, this product efficiently helps in creating consistent and precise dough portions for various baking needs. Comes complete and in great condition.

FAM Mantis Belt slicer 2006, stainless, V belt slicer, HMI Touch screen controls, V belt length 2300mm, equipped with cutting wheel that holds 25 knives, up to 7000Kgs per hour, mobile, 3Ph

Engine Brand: MAN, Conditie: USED, Engine Cooling Type: External Exchanger (eg. Keel Cooled) , Engine Color: Red , Turbo Type: Dry , Exhaust System: Watercooled , ECU Present?: no , Starter Voltage: 24 Volt , Injection Type: Mechanical Fuelpump , Generator KVA: 450 , Generator Hz: 50 , Generator Volts: 380/220 , Generator Amps: 684 , Generator Fases: 3 Fases , , https://www.hamofa.com/catalog/product/view/id/300552, , = More information =, , Empty weight: 3.800 kg, Type number: E2842E GENERATOR 450KVA

General SKU255T403 LocationBarneveld MakeManesty (UK) TypeAccela-Cota 10 Main Features MaterialStainless steel Motor0.55 KW Inlet diameter280 mm Specified Features - Coating pan Coating pancheck Coating installationcheck Batch size15 kg Pan diameterdia. 610 mm Pan depth440 mm Cylindrical width280 mm In-/Outletdia. 280 mm Motor0.55 kW (400 V) Pan speed6 - 30 rpm MaterialStainless steel 1.4552 With jacketcheck General No.1001N0 Year of constructionunknown With switchgear(as is) Floorspace0,8 x 1 m Total height1,8 m Weight550 kgCoating pansNew arrivalsManestyCoating pans > Coating pansNew arrivalsBrand > Manesty What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneve ...

General SKU268N293 MakeManesty machines ltd TypeAccelacota 10 No.280188 Year of constructionca. 1986-1988 LocationBarneveld Main Features MaterialStainless steel Motor2 KW Inlet diameter600 mm Specified Features - Coating pan Coating pancheck Coating installation:Tablet coater: Batch size15 Kg Pan diameter610mm Pan depth± 450mm Cylindrical width± 220mm (screen) Motor0,5 KW With variable speed drivecheck Pan speed6 - 30 rpm With electric heating(external) With fancheck Capacity500 m3/h Motor0,25 kW (400 V) With spraying armcheck MaterialStainless steel 1.4552 With jacketcheck General With switchgear(as is) Floorspace1,7x1,2 m Total height1,9 m Weight500 kg Extra Specifications- air heater includedCoating pansNew arrivalsManestyCoating pans > Coating pansNew arrivalsBrand > Manesty What you can expect from Foeth: -- Machine is in working condition -- At  ...

General SKUR1114 MakeManesty (UK) LocationBarneveld TypeAccela-Cota 10 Main Features MaterialStainless steel Inlet diameter600 mm Specified Features - Coating pan Coating pancheck Pan diameter610 mm Pan depth400 mm In-/Outletdia. 280 mm Motorcheck With fancheck Motor0.18 kW 220/380 Volt With spraying armcheck MaterialStainless steel 1.4552 With jacketcheck General No.7 Q 178 Year of constructionunknown With switchcheck Floorspace1,8 x 1,3 m Total height2,1 m Weight930 kgCoating pansManestyCoating pans > Coating pansBrand > Manesty What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

3 Axis CNC Flatbed Router Cut 1500mm x 3000mm sheet materials. 2 vacuum pumps to hold down your materials. Matrix Table Vacuum Holding System with T-Slot. 6 Tool Auto Changer. 2 Bag dust collection system. High-performance 9.0 kW air-cooled spindle ER32 auto tool changer with 6 positions. Max 24,000 rpm spindle. NK105 DSP control with pendant USB input hand controller Selection of cutters to get you started. Also have offcuts of MFC sheets for you to practice on. 3 Phase machine - requires 32A 3 Phase Type D rated MCB The machine is in overall great condition.

Te koop Rosemount presurre transmitter druktransmitter met manyfold Type: 3051 Order number: 3256.3 Voor meer info graag bellen of mailen. Email: wh.derikxgmail.com Phone: +31620758459 De prijs is excl. 21%btw Voor internationale verzending prijs aanvragen

Key data: 342000 KW, 427000 kVA, 13800 V

QUALITY USED, 342 MW, 13,800V. 60 HZ. HFO POWER PLANT 342 MW, 60 Hz. Complete HFO Power Plant Complete Power Plant Quality Use, with Thirty Eight (38) MAN 18V32/40CD and two (2) MAN 9L32/40CD with HYUNDAI Generators ENGINES: ▪ Manufacturer: MAN/STX, Type:18V32/40 CD, Output power: 9.037 kW, Number of cylinders: 18, Speed: 720 rpm ▪ Manufacturer: MAN/STX, Type:9L32/40 CD, Output power: 4.37 kW, Number of cylinders: 9, Speed: 720 rpm Manufacturing Year: 2008, approximately 300 hours of use since the last overhaul GENERATORS ▪ Manufacturer: HYUNDAI, Type: HSGD 1011K10, ▪ Output power: 10.954 kVA, Current: 458.3 A, Frequency: 60 Hz, Speed: 720 rpm ▪ Manufacturer: HYUNDAI, Type: HSR7 943 10P, Output power: 5.444 kVA, Current: 227.8 A, Frequency: 60 Hz, Speed: 720 rpm, Power factor: 0.8, Insulation class: F, Power factor: 0.8, Insulation class: F Ready for d ...

Key data: 1980 KW, 2111 kVA, 690 V

Surplus/Never Used/Never Installed Power Plant Four (4) MAN-Hyundai 6L27/38 1,980 kW (each ), 690v. 60 Hz. 720 RPM, Six (6) Wartsila 9L20, 1600 kW (each) 450v. 60 Hz. 900 RP and Six (6) Wartsila 6L20, 875 kW, 450v. 60 Hz. 900 RPM Marine -Diesel Generator Sets Complete HFO-Diesel 22.7 MW Power Plant with all their respective auxiliaries and BOP, 450v./690v. 60 Hz. These units can burn Diesel, Gas Oil, Marine Gas Oils (MGO), Marine Diesel Oil (MDO). Year of Manufacturing of this power plant is 2008 and 2012.

Key data: 588 KW

Make: MAN Model: D2876LE423 Engine type: Four-stroke Direct Injection Cylinders: 6 Output: 588 kW Speed: 2300 rpm Mfg year: 2013 Condition: New and Unused.

A total of five mobile antiviral air purifiers Mann & Hummel are available. Air change rate at 70m²: 5-fold, max. indoor room size: 70m², max. air volume flow: 950m³/h, prefilter: ISO ePM10, main filter: HEPA H14, min. separation efficiency: 99.995%. Machine dimensions X/Y/Z: approx. 770mm/510mm/630mm, weight: approx. 60kg. Three units have approx. 1000 operating hours, the remaining two are in original packaging. Documentation available. An on-site inspection is possible.

Manual Sandblasting Cabinet Manual sandblasting cabinets are economical and versatile booths that can be used with various abrasives. The booths feature doors that open from both sides for ergonomic use. The sandblasting booths are made of sheet metal, and both the inside of the booth and the inside of the door are coated with wear-resistant rubber. The doors are equipped with special gasket reinforcement for complete sealing. The front of the booth features two hand application holes. These holes house long-lasting, replaceable gloves and a wide-angle viewing window with glass. An optional portable stand and a rotary turntable are available on the side of the booth. The compressed air circuit includes various components, from an oil and water filter to a pressure gauge regulator and a foot-operated, lockable pedal valve. A long-lasting boron carbide sandblasting nozzle is al ...

AMAN diesel generator set powered by a six-cylinder MAN diesel engine, type D25 66 MTE. ALSTHOM UNELEC alternator; power: 180 kVA, 50 Hz, 1,500 rpm, 400 volts. Standby generator set; very low operating hours, well-maintained, and in excellent condition. Supplied without exhaust system or control panel.

Manual Sandblasting Cabinet Manual sandblasting cabinets are economical and versatile booths that can be used with various abrasives. The booths feature doors that open from both sides for ergonomic use. The sandblasting booths are made of sheet metal, and both the inside of the booth and the inside of the door are coated with wear-resistant rubber. The doors are equipped with special gasket reinforcement for complete sealing. The front of the booth features two hand application holes. These holes house long-lasting, replaceable gloves and a wide-angle viewing window with glass. An optional portable stand and a rotary turntable are available on the side of the booth. The compressed air circuit includes various components, from an oil and water filter to a pressure gauge regulator and a foot-operated, lockable pedal valve. A long-lasting boron carbide sandblasting nozzle is al ...

Key data: 200 V

2 x Containerised MAN E2876 LE302 CHP Generator Sets. Fuel: Nat gas V: 400 HZ: 50 Scope of supply: Complete CHP Cogeneration Plant including Container, Engine, Alternator, Base Frame, Control Panel (ComAp), Pumps, Gas Lines, CHP components including Exhaust gas heat exchanger and Water plate heat exchanger, Silencer, Oil tank, Radiator, Dry Cooler, Other ancillaries relating to the running of the generator set. Available for sale from Gas Engine Exchange . Please check our complete range of equipment at gasengineexchange.com.

200 lt manual blasting machine set Whole set contents to be delivered below: • 200 lt automatic sandblasting pot • 20 mt blasting hose • 40 mt pneumatic hose • 20 mt oxygen hose • Sandblasting mask • Full body leather overalls • Automatic valve • SGV valve • Air stand • Blasting nozzle • Adapter • Coupling • Blasting claw couplings

Used Used Depalletizer Manzini Comaco Da-700BL: Year: 1993 Condition: As Is Used Depalletizer Manzini Comaco Da-700BL: year: 1993 Speed: 3 layer/minute Model: DA-700BL Interlayer system PLC SIEMENS S5 Suitable for glass jars Safety protections Code: D 89 More details: https://bottlingscout.com

52 x 74 cm MABEG Investors Suction belt table 1 Offset printing unit Rolandmatic dampening system Recirculating cooling Double-sized printing cylinder refined Weko T 6 Powder Maker

Reference ID PP-59548 Category 4-Colors Manufacturer Manroland Model 704 3B Year Built 2002 Color 4 Impression 138 Max. size 740 × 1040 mm Min. size 340 × 480 mm Condition Good Location Europe Availability Immediately Machine Description 4 colors straight machine 138 million impressions

Manufacturer: SCM Model: Minimax E10 Year of Manufacture: 2019 Type of Machine: Manual ABS Edge-Banding Machine for Curved Surfaces Version: CE Technical Data: - Thickness of pre-cut strip edging: 0.4–3 mm - Edging thickness with guillotine (edge height 80 mm): 0.4–1.5 mm - Edging thickness with guillotine (edge height 50 mm): 0.4–2.5 mm - Edging thickness with guillotine (edge height 45 mm): 0.4–3 mm - Edge height: 10–84 mm - Panel thickness: 8–80 mm - Minimum panel width: 50 mm - Minimum applicable edging length: 210 mm - Minimum internal radius with 0.4 mm edging, concave surface: 25 mm - Minimum internal radius with 0.4 mm edging, convex surface: 5 mm - Feed speeds: 4 / 8 m/min - Working temperature: 140–220 degrees C - Installed power: 3.5 kW / 380 V / 50 Hz - Machine body dimensions: 1,000 x 740 x 1,100 mm (height) - Roll-holder plate diameter: 520 mm - Compress ...

Impressions=186 m, Condition= Very Good , Availability= 2026-07-07, MAN ROLAND 5 COLOURS OFFSET PRINTING MACHINE + LAK • TYPE : R 805+L • SIZE : 100 x 140 cm • COPY : 186 Mil. • YEAR : 1993 (Serial Nr: 854) DETAILS: Rolandmatic RC2 Automatic Washing Devices IR Dryer Quick Action Plate Clamps Power Sprayer Good Condition Immediately Available Note: The machine´s main motor and driver (it was DC Motor) have been replaced with a Baumüller servo motor.

Impressions=56 m, Condition= Very Good , Availability= 2026-07-07, MAN ROLAND 4 COLOURS OFFSET PRINTING MACHINE • TYPE : R 804 • SIZE : 100 x 140 cm • COPY : 56 Mil. • YEAR : 1988 (Serial Nr: 848) DETAILS: Rolandmatic RC2 Automatic Washing Devices IR Dryer Quick Action Plate Clamps Power Sprayer Very Good Condition Immediately Available

Impressions=303 m, Condition= Very Good , Availability= 2026-07-07, MAN ROLAND 5 COLOURS OFFSET PRINTING MACHINE + LAK • TYPE : R 705-3B+LV • SIZE : 72 x 102 cm • COPY : 303 Mil. • YEAR : 2005 DETAILS: RCI – Remote Control Rolandmatic APL – Automatic Plate Change Automatic Ink Roller Washers Automatic Blanket Cylinder Washers Automatic Imp. Cylinder Washers Automatic Size Setting IR Dryer - Hot Air Ink Temperature Control Becker Variair Damp Sys Ink Densite Control Sys IntelliTrax (Print Control Sys) Powder Sprayer With Standart Equipment With Accessories, Tools And Books Very Good Condition Immediately Available

Impressions=77 m, Condition= Very Good , Availability= 2026-07-07, MAN ROLAND 5 COLOURS OFFSET PRINTING MACHINE + LAK • TYPE : R 705-3B+LV • SIZE : 72 x 102 cm • COPY : 77 Mil • YEAR : 2006 DETAILS: RCI – Remote Control Alcolor Dampening, APL – Automatic Plate Change Automatic Ink Roller Washers Automatic Blanket Cylinder Washers Automatic Imp. Cylinder Washers Automatic Size Setting Cabinets Air Cooled IR Dryer Powder Sprayer

Top opportunity for professionals! 🔥 Available now: a comprehensive Hünnebeck Manto formwork package with approx. 210 m² of wall formwork , including matching accessories †ideal for efficient wall forming on site. The package includes a wide mix of Manto panels (various sizes) as well as essential accessories such as alignment clamps, corner clamps, wedge clamps, push-pull props and transport hooks †everything you need for a smooth and fast setup. 💪 👉 Mixed quality, but predominantly 0-star †perfect for cost-conscious contractors focusing on functionality and strong value for money. ✅ All benefits at a glance: Approx. 210 m² Hünnebeck Manto formwork Wide range of panels & accessories Ready for immediate use Ideal for medium to large construction projects Attractive pricing due to mixed  ...

Secure available Manto shaft corners for professional shaft construction, utility, and civil engineering projects 🚀 This premium used shaft formwork in 3 ⭐ condition stands out with its very well-maintained appearance, immediate jobsite readiness, and efficient site operations — ideal for contractors and infrastructure professionals looking for reliable construction material without long lead times 🔥   The proven Manto shaft corner systems are perfect for fast shaft assembly, cost-efficient civil engineering applications, and efficient formwork cycles on site. This professional used formwork delivers flexible application options and supports fast, economical project execution ⚡   Companies looking to buy used formwork benefit from proven quality, short-term availability, and an attractive price-performance ratio directly from availab ...

Max. load capacity: approx. 18t, drive configuration: 4x2, drive type: rear-wheel drive, emission standard: Euro 4, engine displacement: 6871cm³, engine power: 240kW, max. torque: approx. 1250Nm, suspension: leaf suspension at the front, air suspension at the rear, including loading crane. An on-site inspection is possible.

Manni 2500×1300 veneer shelf press Shelf length 2500mm Shelf width 1300mm Load height 410mm Working pressure 300bar Press on 4 cylinders Net price

Manfred Rachner R 1000 PA Pile Turner - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Manfred Rachner R 1000 PA Pile Turner Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines Manfred Rachner R 1000 PA Pile Turner Price: 12500 EUR Download PDF Manfred Rachner R 1000 PA Pile Turner The machine is in very good condition and ready for operation. Technical specifications: Format: 1030 x 740mm Stack height: 1400mm Load capacity: 1000kg Device weight: 850kg Power supply: 380V Stack aeration + shaking Frequency inverter control. Control panel, fast operation, hydraulic drive. Quiet operation. Compac ...

max. format 72 x 102 cm Turn: 2/0 - 1/1 Year of manufacture: 1986 RCI Colour Remote Control Rolandmatic Dampening Units Technotrans cooling unit Plate quick-clamping rails Dry pollinator Weko Stack delivery Reading totalizer: approx. 130 million print Delivery date: Immediately

pressure: 720 t stroke: 15 mm total power requirement: 3 kW weight of the machine ca.: 5 t dimensions of the machine ca.: 1300 x 1800 x 2200 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter:33 mm turning length:330 mm control: 840 total power requirement:20 kW weight of the machine ca.:6 t dimensions of the machine ca.:3850,2000,2100 m 17 axes 3 revolvers with the powered tools 1 gantry with the driven tools Main and counter spindle with C axes Barfeeder Machine On-time 58,133 hours

Brand: MAN, Condition: RECONDITIONED, Nominal Power @ Nominal Rpm: 265 Kw, Engine Injection Type: DIRECTE INJECTIE , Engine Aspiration Type: TURBO INTERCOOLER , Bore: 128 mm, Stroke: 155 mm, Engine Capacity: 11967 cc, Qty Cylinders: 6 Qty, Emission Certificate: EURO 3 , Nominal Rpm @ Nominal Power: 1900 Rpm, , https://www.hamofa.com/stock/diesel-engines/man-d2866-loh28-reconditio ned-longblock/21604, , = More information =, , Type: Engine, Type number: D2866-LOH28

MAN ROLAND 905-6+L Manufacturer: Manroland Model: 905-6+L Year of Manufacture: 1997 Configuration: 5-Color + Coating Unit Speed: 15,000 sheets/hour Maximum Sheet Size: 1,060 × 1,450 mm Condition: Good Location: Europe Availability: Immediately Impression Counter: 403 Million Feeder Automatic Sheet Separation Double-Sheet Detector Side and Front Register System Printing Units 5 Offset Printing Units Coating Unit RolandMatic Inking System Alcolor Dampening System Ink Temperature Control (depending on configuration) Coating Unit Anilox Roller Water-Based Coating System Drying System Infrared (IR) Dryer Delivery Powder Spray Unit Air-Assisted Sheet Delivery Delivery Slowdown System Control System PECOM Control System RCI Operator Console Central Touchscreen Control Optional Equipment Semi-Automatic Plate Changing (AutoPlate) Automatic Blanket Washing R ...

MAN ROLAND 706+L Manufacturer: Manroland Model: 706+L Year of Manufacture: 2003 Configuration: 6-Color + Anilox Coater Condition: Good Location: Europe Availability: Immediately Machine Status: In Production Impression Counter: 289 Million Dampening System ROLAND DELTAMATIC Dampening System Printing Unit 6 Printing Units Anilox Coating Unit RCI Ink Control Remote APL Fully Automatic Plate Loading Cooling System TECHNOTRANS Cooling System Washing System Automatic Wash-Up Device Drying System Infrared (IR) Dryer Hot Air Dryer Delivery Extended Delivery Powder Spray Unit Machine Features High Automation Level Fully Automatic Plate Changing (APL) Remote Ink Control (RCI) Suitable for High-Quality Commercial and Packaging Printing Machine Condition Machine is currently in production. Available for immediate delivery.

Description Item # 9245 - BREAD PRODUCTION & PACKAGING LINE Capacity of around 1650Kgs per hour About 3000 pieces per hour on 550gramme Bread, With the same lot of equipment, you could also produce buns, soft rolls etc. but there is not a make Up Line for these included (owner was going to purchase but ceased production) Line includes : PEERLESS HS100HD Horizontal Dough Mixer, Year 2000, 300litres capacity (around 1000Kgs per hour) (2) KEMPER Spiral Mixers & Bowls, both Year 1991, each with 150litres capacity KEMPER HK200LD Mixing Bowl Hoist, Year 1991, AMF Breadline Dough Distributor, Year 2000 WINKLER Breadline Dough Hopper, Year 2004, BENIER Dough Make Up Line, Year 2007, with Dough Divider, Dough Rounder, Dough Pre-Proofer, and Dough Sheeter/Moulder CAPWAY CONVEYOR SYSTEMS Proofer, Year 2002, with temperature & humidity controller, steam & cold water, around 550metres long WINKLER 2- ...

This 2021 JLG Power Tower is in excellent condition and offers the perfect alternative to scaffolding and ladders. With its compact footprint, you can effortlessly drive it through standard interior doors and narrow corridors. Main benefits: Safe working at height: max working height of 5.10 meters (platform height 3.10 meters) - Spacious platform: Comfortable work platform of 1.52 x 0.75 meters with a load capacity of 250 kg (suitable for 1 person including heavy tools and materials) - Extremely compact: With transport dimensions of only 1.60 x 0.78 x 1.85 meters, this machine fits in almost any elevator and through every interior door - Lightweight construction: A proprietary mass of only 342 kg, which ensures minimal floor load and easy movement - Safety guaranteed: Fully CE-approved, designed for stable indoor use (max. inclination angle 0.5 degrees). Ideal for: Installers, painters, ...

Thanks to the smart articulated arm technology, this mast lift effortlessly reaches over obstacles, pipes and racks. With a working height of 8.15 meters and a lateral reach of 2.39 meters, you always maneuver in the perfect working position. With a width of only 0.99 meters and a clearance height of 1.99 meters, you can drive this machine through standard interior doors and narrow aisles without any problems. Floor-friendly: Equipped with 'non-marking' tires, so ideal for vulnerable indoor floors in distribution centers, shops or business premises. 100% Electric: Quiet, emission-free and perfect for indoor work. Optimal convenience with the BUILT-IN CHARGER. No more hassle with heavy battery chargers lying around, or empty batteries in the wrong location. Plug & Play: Roll out the charging cable and plug it into any standard 230V socket. Always operational: Wherever you are on the const ...

Auction-ID: A1-40282-113

Auction-ID: A1-48399-25

Auction-ID: A1-48399-33