jenbacher type 2 used for sale

1-Farben Offsetdruckmaschine / 1 Color Sheet-Fed Offset Press TOKO 2000 Serial-Nr. 100722 Druckgeschwindigkeit / Production 10.000 Sheets/hr Elektrischer Anschluss / Power supply: 230V / 50Hz / 3,7A Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Air Filter -Type: MS 246 ALR -Dimensions: 305/305/H246 mm -Weight: 40 kg

Multifunctional punch, punch, hole punch, pneumatic hole punch -operated: pneumatic -Year of construction: 1998 -Type: 270164-1

Hydraulic power pack, hydraulic pump, hydraulic pump -Motor power: 7.5 KW -Speed: 1450 rpm -Max. Pressure: bar -Dimensions: 1050/600/H600 mm -Weight: 188 kg

Hydraulische Schwenkarmstanze - hydraulic Clicking Press ATOM SE 20C Baujahr / Year 2007 - Serial-No. 10045880-115 Schneidetisch / Cuttig Surface 900 x 430mm Armweite / Travelling Head Size 370mm Schnittleistung / Power max. 20T / 196kN Abmessungen / machine dimension 900 x 870 x 1400mm Gewicht / weight 630kg Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

DC motor, servo motor, gear motor, electric motor, direct current gear motor -Speed: 30-3000 rpm -Power: 0.07-7.5 KW -Construction: B5 -Diameter shaft: Ø 50 mm -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: 1160/370/H530 mm -Weight: 222 kg

1 color Offset Press Serial-No. 497552 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

with reinforced impeller 2800 min-1 4.0 kW B3 400/690 V IE 3 Max: 3200 min-1 T-max. 70°C incl. spare impeller Year of Make: 2019 Operating and assembly instructions available Weight approx. 76 kg

Gear motor, electric motor, three-phase motor, electric gear motor -small output shaft speeds: 1290 rpm -Diameter shaft: Ø 11 mm -Hollow shaft output shaft speeds: 91 rpm -Diameter shaft: Ø 19 mm -Power: 0.25 kW -Construction: angle hollow shaft -Protection class: IP 44 -Dimensions: 320/160/H180 mm -Weight: 14.5 kg

Ladegerät - Charger for forklift Jungheinrich E 220 G 24/65 B-ET-DA Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Bosch CC 220N 074031 CNC Control Servo Power Supply for Trumpf Laser

Max. sheet thickness: 6 mm steel Adjustable angle 30-120 degrees Knife length: 200 mm Digital angle displays on the right and left Weight: approx. 1,200 kg

Perforationswerkzeug - Perforation tool Tränklein 21916 Serial-No. 21916 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Max. sheet thickness: 4 mm steel, 3 mm stainless steel Knife length: 250 mm Strokes per minute: 52 Weight: approx. 900 kg Knife sharpened Depth stop

Perforationswerkzeug - Perforation tool Tränklein 201071 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

turning diameter: 570 mm turning length: 2000 mm control: Sinumerik 805 Siemens swing diameter over face slide: 365 mm main spindle speeds:: 3-2.500 U/min drive of main spindle: 15/19 kW spindle bore: 62 mm spindle head: DIN 55027 No.8 tailstock taper MT: 5 quill stroke: 190 mm pinole diameter: 80 mm feed range - long. and cross: 0,01-50 mm/u total power requirement: 50 KVA weight of the machine ca.: 5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Complete with intelligent random in feed system. As new condition

Clamping angle for workpiece clamping -Dimensions: 210/160/H200 mm -Clamping width: 40 mm -Surface: milled -Weight: 6 kg

Aluminum table, aluminum work table -Material: Aluminum -1x baseboard -2x plastic worktops -Dimensions: 1210/2010/H800 mm -Weight: 70 kg

Neue Nummerierwerke - New Numbering units Zeisser 100/200 ZAV Some Numbering heads ZEISSER - NEW Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

- Ultra-Sonic banding machine - Standard with the existing accessories

Mixing tub, mixing bowl, mixing trough -Bathtub depth: 470 mm -Contents: approx. 220 l -Corners: rounded -Internal dimensions: 800 x 610 x D 470 mm -External dimensions: 840/860/H640 mm -Weight: 32 kg

Contact expansion block, safety relay -Type: PZE X4 24VDC 4n/o -Number: 76x shooters available -Price: per piece -Weight: 0.2 kg/piece

NH fuse -NH 1 -200 A 500 V AC 440 V DC -Price: per package -Quantity: 4 pieces -Weight: 1.1 kg

Spiralbindemaschine - Spiral binding machine Gestetner 220 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Kannegiesser belt conveyor belt conveyor GF 2250- 880- 800 RA2320 Technical data: Conveyor length (NL): 2250 mm frame width (NB): approx. 880 mm Belt width (GuB): 800 mm Overall height(BH): 110mm Number of support feet: without Conveying speed (v m/s): 0,7at 50Hz, adjustable up and down with frequency converter Drive: Bauer gear motor Electrical data: 400 V / 50 Hz / 0,75 kW deflection drum (UT): Ø = 60 mm belt return roller: Ø = 50 mm Belt: 2-ply PVC belt, grey, smooth Year of manufacture: 01/2020 Optionally available: Supports Side guides one and both sides All prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2020 condition: as good as new (used) Conveying length in mm: 2250 Nominal / outside width in mm: 880 Belt width in mm: 800 Driven: YES Engine type: Bauer Getriebemotor KW: 0,75/S1 Conveyor speed m / s: fr ...

Power supply for servo amplifiers -AC supply voltage: 18-110 V rms/47-63 Hz -DC link voltage: 24-155 V -Dimensions: 60/165/H240 mm -Weight: 1.7 kg

Aluminum table, aluminum work table -made of aluminium -1x ground floor -Border -Feet: adjustable -Dimensions: 2020/900/H960 mm -Weight: 30 kg

Kolbenpumpe und -kompressor für CTP Anlagen / Piston Pump and Compressor CTP Processor Thomas - Rietschle 2750BGHISS75 Baujahr / Year 2013 - Serial-No. 081300019158 für CTP Anlagen (Beispiel Agfa) / for CTP Processors (examplae Agfa) Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Saw roller block, saw roller block, sawhorse, roller conveyor block -for: hacksaw, band saw, cold circular saw -Castors height: 475 mm adjustable -Roll width: 280 mm -Dimensions: 380/380/H480 mm -Weight: 64 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange: for three-jaw chucks, four-jaw chucks, face plates -Outside: Ø 235 mm -Cone: 106 mm -Hole circle: Ø 135 mm -Number: 2x discs available -Price: complete -Weight: 14 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange: for three-jaw chucks, four-jaw chucks, face plates -Outer: Ø 159/200/200 mm -Cone: 82 mm -Hole circle: Ø 105 mm -Number: 3x discs available -Price: complete -Weight: 11.8 kg

Year: 2015 - technically efficient, ready to work – after full service - working dimensions: 2800 x 1350 mm - tilting stop pins - pneumatically tilted - sliding/brush strips - pneumatic gun DGS 3100 - pneumatic screw feeder ASS 60

: 36/72 m/min : 285 mm dimensions of saw-band: 2950 x 27 x 0,9 mm capacity 90 degrees: round: 250 mm capacity 90 degrees: square: 220 mm capacity 90 degrees: flat: 280x220 mm capacity 60 degrees: round: 120 mm capacity 60 degrees: square: 80 mm capacity 60 degrees: flat: 140x100 mm capacity 45 degrees: round: 230/200 mm capacity 45 degrees: square: 200/170 mm capacity 45 degrees: flat: 220x200/200x140 mm total power requirement: 1,5/1,8 kW Weight: 485 kg Overall size: 1970x1150x1840 mm Semi-automatic function: - Vice closes and engine starts - Saw head lowers for the cut - Engine shuts off - Saw head lifts, vice opens Semiautomatic dynamic system: Manual lowering of the saw blade to the desired Position and cycle start via the manual button. Upper position is saved automatically. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Clamping plate with T slots, plate field, welding table, welding table -Clamping surface width: 250 mm -Clamping surface length: 250 mm -Height: 40 mm -Plate thickness: 60 mm -Hole spacing: 290 mm -Groove width: mm -Dimensions: 330/260/H40 mm -Weight: 11.6 kg

Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 51 mm -Outer: Ø 200 mm -Width: 40 mm -Price: per piece -Number: 8x available -Weight: 2.2 kg

-Bearing type: Spherical roller bearing -Type: 23224. VB 33. MB -Brass cage -Grease groove -Borway diameter: 120 mm -Outer diameter Ø: 215 mm -Width: 76 mm -Weight: 12.5 kg

Inv. Num. : 8005 Type: RUM 2500 P Producer: PIERCE Created: 2015 Parameters: Control system: Pierce 4/2015 Software: PIERCE WYKRYS CZ Work table length: 3000 mm Work table width: 2000 mm Maximum sheet thickness when cutting: 60 mm Equipment: Technical documentation Plasma source Kjellberg HiFocus 360i Suction KEMPER

dimensions of saw-band: 2950x27x0,9 mm : 36/72 m/min : 285 mm capacity 90 degrees: round: 250 mm capacity 90 degrees: square: 220 mm capacity 90 degrees: flat: 280x220 mm capacity 45 degrees: round: 230/200 mm capacity 45 degrees: square: 200/170 mm capacity 45 degrees: flat: 220x200/200x140 mm capacity 60 degrees: round: 120 mm capacity 60 degrees: square: 80 mm capacity 60 degrees: flat: 140x100 mm output: 1,5 / 1,8 kW Weight: 440 kg dimensions: 1700x1000x1650 mm - with semi-automatic lowering - The CUT CONTROL SYSTEM allows semi-automatic lowering of the Saw bow by the weight of the saw head - The lowering speed is infinitely regulated. Single cuts can do so be carried out with uniform feed - The SHARK 282 CCS has a turntable for double-sided miter. The cut always takes place in the same groove The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bezel, stick, lynette -max: passage: Ø 210 mm -Top height: 300 mm -Edition: gray cast iron -technical drawing with the photos -Dimensions: 660/600/H120 mm -Weight: 59 kg

Hydraulic motor, oil motor, hydraulic pump -Hydraulic motor for: the drive of GSL (German Standard Lift) work platforms -Drive shaft: Ø 22 mm toothed - universally applicable -Number: 11 motors available -Price: per piece -Dimensions: 175/170 mm -Weight: 6.5 kg/piece

Power distribution box, construction site power distribution box, connection cabinet -Assembly -NFI circuit breaker -Main fuse -1x 63 A socket -Supply cable, plug 63 A -Dimensions: 520/520/H800 mm -Weight: 20 kg

Power distribution box, construction site power distribution box, connection cabinet -Assembly -NFI circuit breaker -Main fuse -1x socket: 63 A -Dimensions: 550/550/H850 mm -Weight: 19.5 kg

Frequency converter, frequency inverter, drive converter, controller, variable speed drive -Manufacturer: Siemens, Sinamics Double Motor Module -Type: 6SL3120-2TE13-0AAO -Input: DC 600 V -Output: 3 AC 400 V 3 A/3 A -Quantity: 1 piece available -Dimensions: 500/50/H270 mm -Weight: 5.5 kg

Spherical plain bearings, radial spherical plain bearings, ball bearings, for hydraulic cylinders -Condition: unused -Type: GE 100 UK-2RS -Number: 3x spherical bearings available -Price: per piece -Weight: 4.5 kg

PTC relay, contactor, semiconductor contactor -Type: MS 220 C -Ue: 400 V -le: 2.5 A -AC: 15 -Price: per piece -Quantity: 6 pieces -Weight: 0.1 kg

PTC relay, contactor, semiconductor contactor -Type: MS 220 C -Ue: 400 V -le: 2.5 A -AC 15 Price: per piece Quantity: 4 pieces -Weight: 1 kg

Electric winch with junction box Manufacturer: Haacon Model No.: VTF 1400/213457/875285 The winch is new and unused, but may show signs of storage.

Three-jaw chuck, three-jaw lathe chuck -DH200x3-III -TGL: 30-2332 -Mouth size: Ø 200 mm -Recess: Ø 155 mm -Bolt circle: Ø 174 mm -Through hole: Ø 57 mm -Weight: 12 kg

Pneumatic pressure switches -Type: 2KA/96x96/0-10 bar -Adjustable pressure: 0-10 bar -Number: 4 switches available -Price: per piece -Weight: 1.2 kg