132,187 used machines on RESALE, but how to find them? Machine Search
table length: 4000 mm table width: 2000 mm : 28 mm table height: 815 mm : kg weight of the machine ca.: 1,3 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Ribbed underside for reinforcement. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. width of grinding wheel: 145 mm diameter / bore of grinding wheel: 300 mm Flange taper: Reishauer 0 grinding wheel size: 300x145x160 mm Beam flange (machine type Reishauer RZ 400/800/1000) + including grinding disc T1SP 300x145x160 M 4,5 EW 20° 2GG Cubitron from the company 3M Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer Profiling according to specification module m, running speed gg, pressure angle EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Used automatic labeling machine from KOSME model TOP STAR 960 20T S2 E4. New 2003. For paper labels (main and counter) cold glue. The labeling machine is equipped with two stations with label magazines. Each station has five label transfer pads. The carousel is equipped with 20 plates. General overhaul carried out in 2018.
Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span width: 25 to 75 mm -Load capacity: 2500 kg -Number: 1x terminals available -Price: per piece -Weight: 21 kg
Used fully automatic labeling machine made by KHS Innoket model SE 2000. New 2007. Wet and hot glue labeling capability. Automatic film roll change at each RF station; automatic paper label magazines. Machine speed for RF (hot glue) - max 45,000 butts/hour. Machine speed for paper labels - max 45,000 butts/hr. Machine equipped with 2 stations for paper labels, 2 stations for film labels; 40 plates.
Electric motor, three-phase motor -Power: 2.2 kW -Speed: 1420 rpm -Shaft: Ø 25 mm -Construction: B5 -Protection class: - -Dimensions: 380/295/H250 mm -Weight: 38 kg
Used Self-cleaning milk centrifuge. Technical parameters: type: Alfa – Laval MRPX 214 self-cleaning nominal capacity 12,500l/h Siemens control and inverter for the main drive motor foundation slab made of acid-resistant steel water treatment kit made of acid-resistant steel main engine 15kW
max. width of grinding wheel: 145 mm diameter / bore of grinding wheel: 300 mm Flange taper: Reishauer 0 grinding wheel size: 300x145x160 mm Beam flange (machine type Reishauer RZ 400/800/1000) + including grinding disc T1SP 300x145x160 M 2,5 EW20° 2GG Cubitron from the company 3M Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer Profiling according to specification module m, running speed gg, pressure angle EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Three-phase motor, electric motor -Power: 0.18 kW -Speed: 1340 rpm -Shaft: Ø 11 mm -Design: B3 -Protection class: IP 54 -Dimensions: 185/131/H175 mm -Weight: 6 kg
max. width of grinding wheel: 145 mm diameter / bore of grinding wheel: 300 mm Flange taper: Reishauer 0 grinding wheel size: 300x145x160 mm Beam flange (machine type Reishauer RZ 400/800/1000) + including grinding disc T1SP 300x145x160 M1 EW20° 2GG from the company 3M Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer Profiling according to specification module m, running speed gg, pressure angle EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. width of grinding wheel: 145 mm diameter / bore of grinding wheel: 300 mm Flange taper: Reishauer 0 grinding wheel size: 300x145x160 mm Beam flange (machine type Reishauer RZ 400/800/1000) + including grinding disc T1SP 300x145x160 M 5,5 EW 20° 2GG Cubitron from the company 3M Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer Profiling according to specification module m, running speed gg, pressure angle EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. width of grinding wheel: 145 mm diameter / bore of grinding wheel: 300 mm Flange taper: Reishauer 0 grinding wheel size: 300x145x160 mm Beam flange (machine type Reishauer RZ 400/800/1000) + including grinding disc T1SP 300x145x160 M 4 EW 20° 2GG Cubitron from the company 3M Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer Profiling according to specification module m, running speed gg, pressure angle EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
AS crane hooks, frame formwork, pipe slings, shaft ring slings -Load capacity: 1000 kg -Number: 3 claws present -Price: per piece -Weight: 13 kg
Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span: 1 to 30 mm -Load capacity: 2,500 kg -Number: 1x terminal available -Price: per piece -Weight: 11 kg/piece
Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span: 8 to 25 mm -Load capacity: 2,500 kg -Number: 4x terminals available -Price: per piece -Weight: 12 kg/piece
Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span width: 10 to 27 mm -Load capacity: 2,500 kg -Number: 1x terminals available -Price: per piece -Weight: 14 kg/piece
Machine type: MIG/MAG welding machine Make Merkle Type ME 251 LK Appendix No. 7206 Connection voltage 3 x 400 volts Adjustment range 40 - 250 amps Duty cycle 35% ED at 250 amps 60% ED at 170 amps Current setting 8 switching levels Cooling transformer by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire Feeder 2-Roller Drive Fuse 16 Ampere Dimensions L x W x H 815 x 440 x 680 mm Special accessories for point and interval equipment Weight 122 kg Age approx. 20 years Condition workshop tested, good incl. UVV test report Scope of supply welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer 1 roll of welding wire D-200 coil, 5 kg 1 can of non-stick spray 1 piece spare parts box, complete Adorned 1 pair of welding gloves 1 Pi ...
electronic clamping elements, twist-and-turn clamps -Clamping force: 160 kN -stat. max.: force 30 kN -Clamping stroke: 15 mm -Total stroke: 60 mm -Dimensions: 720/200/H220 mm -Weight: 60 kg
Multifunctional punch, punch press, hole punch, pneumatic hole punch -pneumatically operated -Year of manufacture: 1998
Working widths: 1800 mm roll surface width: 2000 mm pressure: t Number of rollers: 2 Stück Upper roll: Gravur oder Stahl dia diameter of upper rolls: 210 mm Heating - upper roll: Elektro Lower roll: Gummiert dia diameter of lower rolls: 300 mm Roller covering - soft rubber: 95 Grad shore Clouth speed: m/min required power: kW weight: 2 t dimensions of the machine ca.: 3,0 x 1,5 x 1,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Working widths: 4000 mm Roller width: 4200 mm Number of rollers: 2 Stück Supporting roller - dia: 490 mm Roller covering - soft rubber: 75 Grad shore Swimming roll - dia: 340 mm Roller covering - soft rubber: 75 Grad shore Pressure line: 50 N / mm Pressure total: 21 to Liquor trough with guide roll: heb + senkbar Cloth guiding system: Leitwalze vor der Fuge Drive side: Links Operting side: Links Compensator: pneum. Entlastung Drive shaft: Durchmesser 70 mm required power: 30 m/min =10 kW Hydraulic unit for combined pressure: • 2-Bowl-Finishing-Padder with 1 Swimming roll (S-Roll), • with double-trough for double-dipping • can be used as full-bath-dipping or indirect back swash • machine can be compeletely overhauled before delivery (The picture is showing a scheme of this padder type) • in addition a new frequency drive is possible for the adaption of this machine into a co ...
weight max. in kg: 2500 kg stroke: ? mm fork length: 1100 mm total power requirement: ? kW weight of the machine ca.: 4,5 t dimensions of the machine ca.: ? m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Gear motor, electric motor -Speed: 9.7 rpm -Power: 0.37 kW -Construction: B5 -Brake: 24 V DC -Diameter shaft Ø 40 mm -Protection class: IP 65 -Number: 1x available -Dimensions: 690/300/H230 mm -Weight: 52 kg
SPECIFICATIONS: Max. machining length mm: 2500 Max. machining width mm: 350 01 - 02 Milling/grinding units per week 7.5 03 - 04 Milling/grinding units per week 4.0 08 Workpiece clamping presses Fast workpiece return
Type: Promeco 2000 ETK Year of Make: 2004 Electr. Connection: 1AC/N/230V 50-60Hz/ 3.0A The Innocheck Promecon 2000 testing system is equipped with a PC base system, camera, illumination panel and monitor.
Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: drive heart, three-jaw chuck, four-jaw chuck, face plate -Outer: Ø 210 mm -Short taper: 5 (82.5 mm) -Number: 2x discs available -Price: per piece -Weight: 5 kg
Chassis, electric motor, DC motor, traction motor, drive motor -Chassis: for forklifts -with slewing ring and drive (steering) -Wheel: 240 x 105 mm -Quantity: 1 piece available -Dimensions: 425/430/H670 mm -Weight: 100 kg
Lifting kneader Diosna Kneader extendable Model: D 200 A for max. 200 kg dough depending on the TA Dough machine with flour dust cover 2 tank cars with tilting device 2 gears, with protection circuit Connection 400V, 32A-CEE plug Machine Many more lifting kneaders in stock!
plate thickness: 6,0 mm ST plate thickness: 4,0 mm VA table-size: 780 x 1000 mm blade length: 200 x 200 mm strokes per minute: 60 min engine output: 3 kW weight of the machine ca.: 1100 kg dimensions of the machine ca.: 1400 x 800 x 1300 mm Furnishing: - electro-hydraulic notching machine, with angle adjustment 15° - 150° Angle adjustment by hand wheels - front panel - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface to avoid tilting or slipping of the metal sheet - 2x staking stops with movable and interchangeable stop bars - lateral clippings ejection - free-moving footswitch - Operation manual Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9397092 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Multifunctional punch, punch press, hole punch, pneumatic hole punch -pneumatically operated
Theisen & Bonitz tb sprint 310 VP, machine number 310 VP 2784, year of construction 2001, 10 stations, format min. 65 x 100 mm - max. 350 x 500 mm, flat pile feeder, stacking height 30 cm, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.
Bezel, stick, lynette -Max. Passage: Ø 240 mm -Tip height: 380 mm -Edition: gray cast iron -technical drawing with the photos -Dimensions: 700/160/H830 mm -Weight: 120 kg
Marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube -for: scribing plate, clamping plate, alignment bench ... -Number: 1x prism -Price: complete -Dimensions: 210/85/H226 mm -Weight: 14 kg
WEINGARTEN DE 200-20 press built in 1975 in Germany is used for precision workpiece machining. The rigid construction combined with a high press force of 200 tonnes make the machine the perfect solution for mass production of various types of parts. The process of precision sheet metal pressing can be fully automated when the WEINGARTEN press is retrofitted with a sheet metal feeder. Technical specifications of the WEINGARTEN DE200-20 200 t press - press force: 200 t - maximum slider stroke: 200 mm - minimum slider stroke: 15 mm - maximum number of slider strokes: 60/min - minimum number of slider strokes: 20/min - slider adjustment: 110 mm
Günther air cooler for the ceiling or for the wall
Folding machine good condition, ready for immediate use. For details, please refer to the nameplate
Offer 24303 Specifications: - Table size approx. 630 x 340 mm - Working range of the axes - X (longitudinal) approx. 400 mm - Y ( transverse ) approx. 220 mm - Z (vertical) approx. 400 mm - Max. distance between milling spindle and table surface 400 mm - Tool holder SK 40 - Working spindle speeds adjustable in 16 steps 45 - 2240 rpm - Mot table feeders X ; Y ; Z 6.3 - 1250 mm/min - Drive 400 V / 8.5 kW - Space requirement approx. W 1450 x H 1900 x D 1450 mm - Weight approx. 1600 kg - with: - 3 axis digital display HEIDENHAIN - Vertical milling head can be swivelled - Horizontal spindle counter holder - Machine vise
Maximum temperature: 1290 °C Interior dimensions: 630 x 530 x 760 mm electr. Connection: 400 V kW Space requirement: 1200 x 870 x 1810 mm Weight: 470 kg Heating capacity: 16.5 kW
Max. sheet thickness: 6 mm steel Adjustable angle 30-120 degrees Knife length: 200 mm Knife sharpened Weight: approx. 1,200 kg
clamping force: 200 kN injection volume: 80 cm³ screw diameter: -- mm platen size: 350 x 300 mm Condition: used, Specification: C-frame injection moulding machine for TPV - second-hand clamping unit: - Clamping unit: vertical - Tonnage: 20 t - clamping force: 200 kN - Heating platen size: 350 x 300 mm Injection unit: - Injection volume max.: 80 cm³ - Connected load: 3x 400 V, 50 Hz - Pump output: 11 kW - Total output: 44 kW Dimensions L/W/H approx.: 2,000 x 1,500 x 2,500 mm Space requirement approx: 3 m² Weight approx.: 2.500 kg There is also an identical system as a spare parts dispenser as an option for an extra charge. The control panel is missing here. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Stop, depth stop, length stop for miter saw, pull saw... -Receiver: Bosch profile -Length Unit of measurement: 2000 mm -Price: complete -Dimensions: 2215/100/H1000 mm -Weight: 10 kg
clamping force: 200 kN injection volume: 80 cm³ screw diameter: -- mm platen size: 350 x 300 mm Condition: used, Specification: C-frame injection moulding machine for TPV - second-hand clamping unit: - Clamping unit: vertical - Tonnage: 20 t - clamping force: 200 kN - Heating platen size: 350 x 300 mm Injection unit: - Injection volume max.: 80 cm³ - Connected load: 3x 400 V, 50 Hz - Pump output: 11 kW - Total output: 44 kW Dimensions L/W/H approx.: 2,000 x 1,500 x 2,500 mm Space requirement approx: 5 m² Weight approx.: 3.200 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Stock number: 3919 CNC LATHE Manufacturer: MAZAK, Type: HQR 200 MSY Year of manufacture: 2018 Specifications: Max. circumferential diameter 344 mm dia. Turning length 860 mm Main motor power 22 kw Main spindle speed range 5000 rpm Hole through drawing tube 65 mm dia. C Axles 0.001 Both spindles Y axis upper 100mm / lower 70mm mm Tool turret 1 with 12 stations Tool turret 2 with 12 stations Powered tools. 6000 Both Turrets rpm Control Mazak Smooth Fabr. Accessories: Collet device. Heinbuch 65 both spindles Hydr. Chuck main spindle 210 mm dia Hydr. Chuck Subspindle 210 mm dia Driving angle tools 6 pieces Driving Tools Straight 5 pcs. Tool setter Charging Hydrafeed X-Tract Delivery time September 2024 Length: 4000 mm, Height: 2500 mm, Width: 2700 mm, Weight: 12500 kg
Key data: 350 mm, 500 mm
Stock number: 3920 CNC LATHE Manufacturer: Mazak , Type: Quick Turn Smart 200 Year of Make: 2012 Specifications: Max. circumferential diameter 350 mm dia. Max. turn. About Bed 660 mm Dia. Turning length 500 mm Main motor power 15 kw Spindle bore 65 mm dia. X axis movement 195 mm Z ash movement 560 mm Tool turret with 12 stations Controlled in 2 Axes Accessories: Hydraulic Main Centering Chuck 200 mm dia. Various tool holders. Cooling water system. Hydraulic tailstock. Length: 2700mm, Height: , Width: 1680mm, Weight: 4410 kg
Dissolver Pendraulik Disperlux TD 200 EX protected design Power 1.5 kW Speed range 930-8400 1/min Very good ready-to-use condition, straight from production
Gear motor, electric motor, electric gear motor -Speed: 24/48 rpm -Power: 0.15/0.2 kW -Construction: B3 -Diameter shaft: 20 mm -Protection class: IP 54 -Dimensions: 335/170/H180 mm -Weight: 12.1 kg
geared motor, electric motor -Speed: 40.5 rpm -Power: 0.55 kW -Design: B5 -Shaft diameter: Ø 25 mm -Protection class: IP 65 -Dimensions: 445/230/H210 mm -Weight: 26 kg
PKC/ 2000 Steam peeler for vegetables with steam buffer used, sold as it is, where it is, price ex location
x-travel: 13000 mm y-travel: 2750 mm z-travel: 3000 mm turning speeds: 600 U/min spindle taper ISO: 50 milling head: 4 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dear Ladies and Gentlemen, we currently have a Mazak VTC 20 B, for sale. It is fully functional and can be visited at any time.
maximum number of results exceeded
please refine your search
