129,505 used machines on RESALE, but how to find them? Machine Search
; Gross weight [kg]: 2000; Engine: NEF45SM1A; Accessories: Tanker, Battery, Control Panel, Stahldach, - Super Silent Canopy, - Including: battery charger and coolant heater, - input socket: 230V , - Output sockets: 2x 230V 16A, 2x 400V 32A, 1x 400V 63A, 5x powerlock; Water Tank Volume [l]: 215
Nominal force: 2500 tons Slider stroke: 600 mm Slide strokes per min: 11 Distance between table and slider: 1500 mm Capacity of the main drive: 220 kW Table size: 2000x4500 mm Machine dimensions: 5910x8700x10355
Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Volvo Engine: TAD 733 GE Engine No.: 5312982207 Power: 201 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Leroy Somer Generator type: TAL044-M Gene. No.: 39664900008 Generator power: 200 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Parallel operation Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 990 Dimensions of the power unit: Width approx. mm: 1.200 Height approx. mm: 2.295 Length app ...
used
General- partial hollow clamping device (hydraulic), - C-axis and spindle brake (hydr.) - upper compound slide with turning-/ milling spindle, with hydraulic locking reception HSK-A63, DIN 69893 - Y-axis ±210 mm - B-axis ±120º interpolating, Torque motor - tool magazine 36-fold disc magazine, ergonomic front load - absolute, direct measuring systems in X-, Y-, Z1-axis - cooling pump 6 bar;20 l/min,; Control: CELOS X with Siemens 840D SL Operate Main drive 1Drive power (100% DC)33 kWDrive power (40% DC)40 kWSpeed range- 4000 rpmTorque (100% DC)580 NmMax. torque (40% DC)700 NmC-Axis Speed-4000 rpmTorque of C-Axis (holding torque)1100 NmAccuracy at point stopping0,001 degreeWorking areaSwing diameter over guide ways700 mmTurning diameter630 mmClamping chuck diameter max.400 mmDistance between spindles2260 mmBar diameter max.102 mmTurning-milling spindleSpindle taperHSK-A 63 DIN 69 ...
Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Deutz Engine: TCD 2013 L06 4 V Engine No.: in production Power: 250 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Stamford AvK Generator type: UCDI 274 K 1 Gene. No.: in production Generator power: 250 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Emergency power operation Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 500 Dimensions of the power unit: Width approx. mm: 1.100 Height approx. mm ...
The machine is in good technical condition, after prior agreement it is possible to test it. designed for serial and piece production. It is one of the classic 2-axis CNC lathes (X, Z) with a turret head and is often used in the engineering production of smaller and medium-sized parts. Max. turning diameter: approx. 320 mm Max. turning length: approx. 500 mm Max. diameter above the bed: approx. 500 mm Max. diameter above the slide: approx. 300 mm Spindle Chuck diameter: 210 mm (8") Spindle passage: approx. 52–65 mm Spindle speed: up to 4500 rpm Main motor power: approx. 11–15 kW X-axis: approx. 200 mm Z: approx. 500 mm Rapid traverse: up to 20–24 m/min Turret head 8 or 12 tool positions, possibility of driven tools in the M version Control system Most common: Fanuc 0i-T / Fanuc 21i-T Machine weight approx. 4,000 – 5,000 kg
Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Volvo Engine: TAD841GE Engine No.: 3008598229 Power: 254 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Stamford Generator type: UCDI274K Gene. No.: N22E211704 Generator power: 250 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Parallel operation Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 990 Dimensions of the power unit: Width approx. mm: 1,200 mm Height approx. mm: 2.291 mm Length app ...
Working width: 4000 mm Working height: 2600 mm Number of cylinders: 6 St. Dimensions (L/W/H): 5300 x 1250 x 3330 mm S&S frame press type RP 2000, ----------------------------- C E - version Stable frame welded construction made of thick-walled special hollow profiles, Sliding carriage and pressure bar with 50 mm hole pattern. Continuous abutment on the left for width compression, lower abutment in two levels. Vertical press cylinder on special pressure bar with one-hand quick adjustment with weight compensation in the 50 mm hole pattern, height-adjustable, long Sliding carriages ensure the permanent absorption of high pressing forces. Fast, smooth width adjustment with ball-bearing carriage Central locking, fixation in 50 mm hole pattern. Upper horizontal press cylinder infinitely adjustable in height and with Equipped with counterbalance. Lower horizontal press cylinder with center hole ...
ENGEL INSERT 200H/50 injection moulding machine was manufactured in 2007 in Austria. The machine with its small size and large capabilities is used for e.g. overmoulding of inserts and the joining of various materials such as glass, metal and electronics. Thanks to the combination of a clamping force of 50 tonnes and high-quality components, the injection moulding machine guarantees excellent quality of inserts and high repeatability. The machine’s sturdy, solidly built construction features a convenient and easy-to-use ENGEL CC 200 CNC controller for entering all possible process parameters, such as mould clamping force and speed. Once the parameters have been entered, the two halves of the mould are precisely closed, after which the vertical injection moulding machine ENGEL generates a high clamping force. The mould cavity is carefully filled with plastic under high pressure using ...
Electronically controlled, programmable roller feed for advancing and precise positioning of strip material SIEMENS® PLC – Control Largest sheet strip width 200 mm (optionally up to 800 mm) Sheet thickness range 0.8 to 3 mm Steel sheet 400 N/mm² - (optional thicker sheets on request) Rollers Ø 95 mm Maximum practical feed rate in operation with eccentric presses: 120 strokes per minute with a maximum feed length of 80 mm per stroke
EUROMAC STX Flex 12 1250/30-2500 punching machine was built in 2019 in Italy by Euromac S.p.A.. The machine is designed for precision machining of both thick and thin sheet metal. All machining processes, i.e. punching, nibbling and marking, are performed with a force of up to 30 tonnes on a large brush table. Its design prevents scratches and scrapes on the sheet metal surface and significantly reduces noise levels. All tools are stored in capacious stations, three of which are 360° index stations. The high number of tool strokes per minute, reaching up to 2000/min, allows, in turn, maximum production efficiency during even the most intensive challenges. All this is complemented by an advanced industrial controller that allows even the most advanced programmes to be created in just a few steps. The EUROMAC STX Flex 12 Hybrid 1250/30-2500 CNC punching machine weighs 9500 kg. Technica ...
Key data: 200 t, 500 mm, 200 mm
(1982) 200t Lauffer Hydraulic Press High-Speed Hydraulic Press with Advanced Shock Absorption This Lauffer hydraulic press is a high-performance machine designed for speed and precision, capable of 2,000 kN of pressing force. Its high-speed designation is backed by a rapid descent speed of 330 mm/sec and a sophisticated 8-fold flat guidance system to maintain ram alignment even under heavy or off-center loads. Technical Details Machine Type: Hydraulic Press Manufacturer: Lauffer Model: RPS 200 Year of Manufacture: 1982 Nominal Force: 200t Max. Return Force: 225 kN Max. Ram Stroke: 200 mm Shut Height: 500 mm Ram Guidance: 8-fold flat guidance Table & Ram Surface Area (W x D): 800 mm x 630 mm Table Hole Diameter: 204 mm Clearance Between Uprights (Front / Side): 840 mm / 320 mm Operating Speeds: Rapid Descent: 0 – 330 mm/sec (steplessly adjustable) Pre ...
Schrabsock dreh & knatelbar Backenbreidte 200mm Backenhoghe 61mm New
; Power [PS]: 699; Gross weight [kg]: 8425; Engine: Perkins 2806D-E18TAG1A; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and Battery charger; Water Tank Volume [l]: 975
; Gross weight [kg]: 2350; Engine: 200; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 63A - 32A; Water Tank Volume [l]: 224
Key data: 2500 KW, 10500 V
New industrial gas generator set based on MTU Series 4000 engine. Designed for reliable continuous power generation in industrial facilities, CHP plants, and energy projects. Key specifications • Engine: MTU 20V4000 L64 FNER • Fuel: Natural Gas / Biogas • Electrical Output: 2500 kW • Frequency: 50 Hz • Speed: 1500 rpm • Configuration: V-20 gas engine • Electrical Efficiency: up to 43–44% Applications • Combined Heat and Power (CHP) plants • Industrial power generation • Data centers • Energy projects and microgrids Condition: New Availability: On request Location: Europe Contact for detailed technical documentation and price PM: infobscgroup.eu
dimension of workpiece: 200 mm workpiece weight max.: 100 kg voltage: 230 V longitudinal feed: 150 mm vertical movement: 100 mm tool taper: bis 60 mm im Prisma Condition: new / unused: The machine can be viewed under current.: WMTR video measuring device T 210 Granite base plate 500 x 600 x 50 mm Digital size 0,001 mm resolution Longitudinal axis 150 mm Vertical axis 100 mm Tool holder in prism up to 80 mm diameter Swivel bracket 210 ° swiveling image comparison export of dates to EXCEL frequently measuring of video pictures labeling and marking of pictures saving and printing of pictures free calculation of variables detailed user administration superposition of DXF-drawings a lot of special software-modules Video measuring system IPM complete with: Software complete data acquisition create measurement protocols Consisting of: - Calculator, monitor, mouse, keyboard - ...
Inv. Num. : 5148 Type: URWA 250 Producer: Profiroll Created: 2004 Parameters: Rolling force: 800 kN Max. workpiece diameter: 250 mm Workpiece width: 80 mm Spindle diameter: 110 mm Spindle speed: 100-800 1/min Mandrel diameter: 45-100 mm Length: 2400 mm Width: 2400 mm Height: 2400 mm Weight: 4900 kg
WE OFFER A VERY NICE MACHINE WITH COMPLETE TOOLS ACCESSORIESS. MACHINE IS PERFECT WORKING CONDITION, MACHINE IS IN VERY NICE CONDITION IT HAS NEW SPINDLE 3 MONTHS AGO TOTAL WORKING HOURS :11296 H 17min DATE OF INSPECTION: 09.06.2023 PART COUNT : 61849 MACHINE IS ON POWER WORKING IN THE PRODUCTION OF PLASTIC COMPONENTS. MACHINE WAS USED ON METAL ONLY COPLE DAYS PER YEAR. TECHNICAL DATA: CONTROL: FANUC 0iMF SPINDLE TAPER SK: 50 TRANSMISSION: GEAR SPINDLE SPEED 6000 RPM TABLE SIZE: 2400 X 1000 TABLE LOAD MAX: 4000 KG TRAVEL: X: 2200 mm Y: 1000 mm Z: 800 mm MAFAZINE CAPACITY: 24 TOOLS MACHINE HEIGHT : 3600mm MACHINE DIMENSION: 5700 mm x 3900 mm WEIGHT 20.000 KG MACHINE IS AWAILIBLE IMEDIATELY DIRECT FROM THE FACTORY
Side channel blowers See nameplate, All 8 are the same!
Refrigeration system in two versions! You can purchase both or individually. Year of construction :2005 Power : 51,8kW Voltage : 400V 50Hz For further information, please refer to the type plate.
Dust extraction, welding fume extraction, filtering, self-cleaning, pneumatic, vacuum dust extraction, absorbers for plasma, lasers, sandblasting and all types of dry dust. Donaldson Torit Model: 2DF 4C EX Cartridge filter cartridges, which are pneumatically cleaned by pulses of compressed air during operation, resulting in high efficiency of the device. The fan is located behind the filter on the clean side, which reduces the risk of explosion to a minimum.
Hakon Sliding Rack System – Professional storage solution for glass, sheets, and large-format materials This used Hakon sliding racking system is ideal for companies in the glass, metal, or sheet metal processing industries that require safe, organized, and space-saving storage. The racking is robust, slides smoothly, and is designed for intensive daily use. Technical Specifications Brand: Hakon Type: RBM 225er/3T/30 Year of construction: 2018 Construction: Welded steel frames, industrial grade Operation: Manual sliding system Length: 10.635 meters Width: 3.16 meters Height: 2.13 meters Maximum size: 550 x 3,210 mm Capacity: 10 bucks Connection: 230V (standard plug) Fuse: 16A Condition: As new, fully functional, ready for immediate use ⭐Key Benefits Space-saving: Sliding frames ensure maximum storage on minimal floor space Safe & organized: Materials remain ...
Dust extraction, welding fume extraction, filtering, self-cleaning, pneumatic, vacuum dust extraction, absorbers for plasma, lasers, sandblasting and all types of dry dust. Donaldson Torit Model: 2DF 4C EX Cartridge filter cartridges, which are pneumatically cleaned by pulses of compressed air during operation, resulting in high efficiency of the device. The fan is located behind the filter on the clean side, which reduces the risk of explosion to a minimum. Year of construction: 1995 Voltage : 660 V Power : 4 kW Frequency : 50Hz Capacity : Unknown
KIMLA BPF 2030 CNC router was built in 2011 in Poland by POLCOM Przemysław Kimla. The machine was regularly maintained throughout its service life. In 2021, the ISEL 10 bearings along with the lead screw in the Z axis were replaced. KIMLA BPF 2030 is an excellent choice for both small and medium-sized companies with a diverse production profile. The machine enables precise machining of a wide range of materials, i.e. light metals, plastics and wood. After fitting a special cutting head, it is also possible to cut parts made of rubber and cardboard. All machining processes are performed on a large work table with an ergonomic design. The spindle, driven by a high-powered motor, rotates at a maximum speed of 24000 rpm and moves in three X,Y,Z axes with feeds of 2000 mm, 3000 mm and 500 mm respectively. Tools taken from a 10-position magazine are in turn continuously measured and calibr ...
; Gross weight [kg]: 1005; Engine: Kubota V3300-TE2BG2; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 140
; Gross weight [kg]: 730; Engine: Kubota V2403-M-DI-BG; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 110
pressure: 100 t chamfer lenght: 2050 mm control: CYBELEC DNC 880S weight: 8000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Machine Details Stock-No. 1105-03893 Type of machine Surface Grinding Machine - Horizontal Make CANTALUPPI Type 2100 x 450 Year of manufacture 1975 Type of control conventional Storage location FRANCE Country of origin Germany Delivery time immediately Freight basis EX WORK Technical details grinding length 2100 mm grinding width 450 mm workpiece height 650 mm table surface area 2200 x 750 mm distance table - spindle center max. 600 mm table speeds 1 - 25 m/min Cross Feed Autom. 1 - 60 mm/stroke grinding wheel size 400 x 100 x 76 mm grinding wheel speeds 1450 rpm total power requirement 15 kW Additional information Accessories: Magnetplate, 2100 x 400 mm, grinding wheel with flange, draw-off Device.
; Gross weight [kg]: 3621; Engine: Cummins 6CTAA9.5-G1; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 640
Technical data for the shelf connector: Shelving system: Stow Type: Pal Rack NS The scope of delivery includes: 01x Shelf connector, used for shelf spacing: 250 mm Total length: 250 mm Cross-section: U 35x25 mm Material thickness: approx. 2.00 mm Material color: sendzimir galvanized Borehole diameter: 11 mm Weight: 0,330 kg | Pcs. 02x Screws M10 x 35 mm 02x Nuts M10 General information about the item: This item is offered for pickup only. Any further desired transport or shipment of this item is associated with additional costs, which can be requested separately from us depending on the place of delivery or scope of delivery.
Brand Bauer Model: GF-24KW Year of construction: Unused, 2023 Serial Number: On request Capacitance (KvA) 30 Capacity(kw) 24 Engine model ZH4100D Fuel: Diesel Alternator model YHG-24KW Voltage 400 Frequency (Hz) 50 RPM 1500 Amperes (A) 43.3 Dimensions LxWxH (mm) 1600 x 760 x 1650 Weight (Kg) ca 600 Number of pieces in stock 2 Made in China Comments Unused open skid diesel generator, Smartgen genset controller
; Gross weight [kg]: 2000; Front tyre size: 155/80 R13; Rear tyre size: 155/80 R13; Wheelbase: 3075; Vehicle outer dimensions [m]: 4,35x1,6x1; Cargo space dimensions [LxBxH]: 3,05x1,5; Max payload [kg]: 1665
table length: 2400 mm table width: 1200 mm table height: 200 mm bore: 28 mm weight: 980 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Omschrijving Lengte mm Aantal Bovenmes H=66,5mm, R=0,8 85gr 835 2 Bovenmes H=66,5mm, R=0,8 85gr 415 2 Bovenmes H=66,5mm, R=0,8 85gr 300 1 Bovenmes H=66,5mm, R=0,8 85gr 150 1 Bovenmes H=66,5mm, R=0,8 85gr 50 1 Bovenmes H=66,5mm, R=0,8 85gr 40 1 Bovenmes H=66,5mm, R=0,8 85gr 20 1 Bovenmes H=66,5mm, R=0,8 85gr 15 2 Bovenmes H=66,5mm, R=0,8 85gr 10 1 Bovenmes H=66,5mm, R=0,8 85gr LEFT 100 1 Bovenmes H=66,5mm, R=0,8 85gr RIGHT 100 1 Ondermatrijs V10, R=0,8, 85gr 835 2 Ondermatrijs V10, R=0,8, 85gr 415 2 Ondermatrijs V10, R=0,8, 85gr 300 1 Ondermatrijs V10, R=0,8, 85gr 150 1 Ondermatrijs V10, R=0,8, 85gr 50 1 Ondermatrijs V10, R=0,8, 85gr 40 1 Ondermatrijs V10, R=0,8, 85gr 20 1 Ondermatrijs V10, R=0,8, 85gr 15 2 Ondermatrijs V10, R=0,8, 85gr 10 1 Totaal 26 Price € 2250,-- New prijs € 3250,--
Machine type: Pulse arc inverter welding machine with touch display Make MERKLE Type HighPULSE touch 280 K Serial No. 130.233 Connection voltage 3 x 400 volts Setting range 25 – 280 amps Duty cycle 35 % d.c. at 280 amps 100% d.c. at 200 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Portable industrial plant design with a connection for water cooling Wire feeder 4-roller drive DV 26 Fuse 16 amps Dimensions L x W x H 600 x 300 x 565 mm Weight 33 kg Age: 2 years Condition workshop-tested, like new, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch SBT 307, 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll of welding wire 0.8 mm, D-300, 5 kg 1 pair of welding gloves wi ...
Machine type: Pulse arc inverter welding machine with touch display Make MERKLE Type HighPULSE touch 280 K Connection voltage 3 x 400 volts Setting range 25 – 280 amps Duty cycle 35 % d.c. at 280 amps 100% d.c. at 200 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Portable industrial plant design with a connection for water cooling Wire feeder 4-roller drive DV 26 Fuse 16 amps Dimensions L x W x H 600 x 300 x 565 mm Weight 33 kg Age: 6 months Condition workshop-tested, like new, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch SBT 307, 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll of welding wire 0.8 mm, D-300, 5 kg 1 pair of welding gloves with cuff 1 piece sp ...
Adjustable jaw from 90 to 45 degrees, High: 1210 mm, Long: 1280 mm, Width: 710 mm, Weight: 410 Kg, Voltage: 220/380 V, Total power: 2.5 Cv, Ø max. cut: 260 mm, Blade length: 450 x 38 mm (18 ), Specification: Hydraulics
x-travel: 2.200 mm y-travel: 560 mm z-travel: 720 mm control: 840 D Powerline ShopMill Siemens Main spindle:: turning speed range - main spindle: 20 - 12.000 min/-1 power capacity - main spindel: 35 / 25 kW max. Torque: 130 / 87 Nm tool taper: SK 40 internal coolant system feed: 40 bar work table:: table surface area: 2.600 x 600 mm max. table load: 2.200 kg number of T-slots: 6 T-slot - width: 18 H7 mm T-slot - distance: 100 mm Tool-Presetter:: number of toolpositions: 30 pos. max. tool length: 300 mm max. tool weight: 6 kg max. tool diameter: 80 / 125 mm feeds:: feed speeds: 20.000 mm/min input unit: 0,01 mm rapid traverse ( X / Y / Z ): 100 / 50 / 50 m/min measuring system: Resolution: 0,001 mm total power requirement: 60 kVA weight of the machine ca.: 12,5 t dimensions of the machine ca.: 6,0 x 3,7 x 2,9 m Documents: Chip conveyor: Coolantsystem: high pressure coolant: throu ...
Carton Erector BE-2200 Manufacturer: Soco-System Condition: used Model/Type: BE-2200 ATS Total length: approx. 2960 mm Total width: approx. 1700 mm Total height: approx. 1340/1600 mm Carton size: min. 180 L x 130 W x 100 mm H Box size: max. 440 L x 315 W x 450 mm H Internal Article Number: 2026032301 The conveyor technology ran until dismantling. Features: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Pick-up address: Industriestraße 5 (47918 Tönisvorst) Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading your goods! We would be happy ...
CNC controller: Mitsubishi M730UM (CELOS - ERGOline Touch) Capacity X-axis travel mm: 260 Y-axis travel mm: ±50 Z-axis travel mm: 795 Turning length mm: 705 Max. turning diameter mm: ø: 366 Swing over bed mm: ø: 920 Swing over cross-slide mm: 740 Bar work capacity mm: 80 Tool magazine Magazine places: 20 Tool holder: BMT40 Upper turret Number of tool slots St .: 20 Speed driven tools RPM: 10.000 Drive power driven tools kW: 5.5/4.9/4.2 (3 min/5 min/cont) Rapid Feed Rate: 30 Main spindle Speed spindle rpm: 4.000 Drive power spindle kW: 18.5/18.5/15 (25%ED/50%ED/cont) Maximun torque Nm: 49 Counter spindle Speed spindle rpm: 5.000 Drive power spindle kW: 11/7.5 (25%ED/cont) Maximun torque Nm: 22 Counter spindle travel mm: 734 Coolant system Tank capacity liter: 366 Equipment Electronic Handwheel Chip conveyor Signal lamp High pressure pump Measuring probe ...
Capping machine for bottles. Capper incl. various format parts, exit turntable, infeed vibrators. The machine stays in line with a filling machine GRONINGER, DFV 6000.
Screwdriver Alcoa Year of construction: 1991 Type: DC 2090ZS Control: Siemens S5 Capacity: up to 50,000 bhp
Kettner Type: Pressant 2000EP Model: Box Depalletizer Year of construction: 1990 Capacity: max 40 pallets/pcs.
maximum number of results exceeded
please refine your search
