jenbacher type 2 used for sale

Offer 25146 Specifications: - Portable version suitable for CrNi steels - Air volume flow approx. 200 m³/h - Max. vacuum 19000 Pa - Filter area approx. 0.8 m² - Filter separation efficiency 99.9% - Extraction connection 60 mm - Suction hose 6 m - EWM water-cooled burner package with 4 m extraction function - Start-stop automatic - Dust drawer - Drive - Fan 230 V / 1.1 kW - Space requirement approx. W 650 x H 600 x D 250 mm - Weight approx. 25 kg

Offer 25147 Specifications: - Portable version suitable for CrNi steels - Air volume flow approx. 200 m³/h - Max. vacuum 19000 Pa - Filter area approx. 0.8 m² - Filter separation efficiency 99.9% - Extraction connection 60 mm - Suction hose 5 m - Burner package water-cooled with suction function 4 m - Start-stop automatic - Dust drawer - Drive - Fan 230 V / 1.1 kW - Space requirement approx. W 650 x H 600 x D 250 mm - Weight approx. 25 kg

Offer 25318 Specifications: - Manual band sawing machine - Saw blade dimensions 2375 x 20 x 0.9 mm - 2 cutting speeds N 33 / 66 rpm - Max. clamping possibility 205 mm - Mitre adjustable li + re 30 ° - Cutting range - 90° round 160 mm - Square 160 mm - flat 200 x 100 mm - 45° li + re round 140 mm - flat 140 x 60 mm - Drive 400 V / 1.5 / 1.8 kW - Coolant device - Discharge roller conveyor with stop 3000 mm - Feed roller conveyor 1500 mm - Weight approx. 350 kg - Space requirement approx. W 1100 x H 1700 x D 1550 mm

Inv. Num. : 948 Type: LVH 2500 Producer: ŽĎAS Created: 1961 Parameters: Depth: 1800 mm Width: 3450 mm Height above ground: 4650 mm Weight: 85 000 kg Voltage: 220 / 380 V Mains frequency: 50 Hz Workforce: 2500 t Number of strokes: 20/min Height of the lifts: 500 mm Minimum plunger distance from the table: 900 mm Maximum plunger distance from the table: 1400 mm Table surface: 1050 x 1400 mm Plunger area: 1050 x 1200mm

Key data: 2000 mm, 500 mm, 550 mm

Specifications: Manufacturer: Chiron Type: Mill 2000 high speed Control: Heidenhain TNC 530 Year of Make: 2013 Travels: X 2,000, Y 500, Z 550 mm Working spindle Speed: 12,000 rpm Start table Dimensions L/W: 2,600 x 550 mm Table load: 1,000 kg Tool/movement Tool holder: SK40 Tool changer: 40-fold Measuring system: direct X/Y/Z Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Conveyor Preparation FK7 Loading automatically "opening and closing" Tub flushing

NEW, felling grab JAK 250 (up to 25 cm), for 5 - 11.5 t excavators,

volume bucket for Genie / Terex attachment, 200 cm width, 1.60 m³ capacity, many other attachments on stock

NEW, - CROCODILE SHOVEL with 2 rear hyd. cylinders, - strong double stiffened hold-down, - 220 cm width, - 0.77 m³ capacity, - 410 kg dead weight, - with Euro mount, photos are only an example!

Earth drill 200 mm TBG-300 (8 mm thickness), suitable for Jansen HBG-2000 earth drill, photo is an example photo!

Earth drill 200 mm TBG-300 (8 mm thickness), suitable for Jansen HBG-2000 earth drill, photo is an example photo!

Suitable for Yanmar VIO 75 mini excavator/Nabtesco, model MSP 00 2609

High-pressure clamp vise MC2 / 200 ORIGINAL PRICE: ~ $1,650.00 Description: - Body made of cast iron FCD 65, jaws made of steel - Ground on the bottom and sides - Anti-lift mechanism - Built-in pull-down mechanism - Mechanical force amplification, seal-free and maintenance-free - Short design - Clamping force can be preset Technical data: Jaw width: 200 mm Vise opening: 300 mm Jaw height: 55 mm Dimensions: 600 x 180 x 210 mm Weight: approx. 90 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Laser cutting machine Type: MSF 4001.20Ltk+T500 4kW IPG Manufacturer: MicroStep Year: 2016 Working area: 4000 x 2000mm + space for pipe cutting Laser: 4000 W IPG Linear guides Rexroth Gear racks Precision helical gears ATLANTA on all axes, double-sided driven portal STOBER gearboxes Drives maintenance-free, processor-controlled AC-servos Panasonic Max. positioning speed 130 m/min - one axis, 180 m/min simultaneously 2 axes. Acceleration 10 m/s2 Z-axis positioning speed 50 m/min Z-axis travel 150 mm Z-axis acceleration 0.75 G Position deviation Pa 0.07 mm in accordance with VDI/DGQ 3441 Repeat return accuracy Ps 0.03 mm in accordance with VDI/DGQ 3441 Ambient operating temperature +10 °C to +35 °C Relative humidity 0 to 90 % Machine in very good condition, under power Find more here - / Contact us at -

Key data: 380 mm, 1000 mm, 4000 1/min

Stock number: 3961 CNC LATHE Manufacturer: MAZAK, Type: QTN 250-1000L Year of Make: 2004 Specifications: Max. circumferential diameter 380 mm dia. Max. turn. About Bed 610 mm Dia. Turning length 1032 mm Main motor power 26 kw Main spindle speed range 4000 rpm Hole through drawing pipe 80 mm dia. X axis movement 230 mm Z ash movement 1000 mm Tool turret with 12 stations Total power consumption 50 kva Control 640 T Nexus Fabr. Spindle Hours 6091 Hours Controlled in X-Z axes Accessories: Hydraulic Main Center Chuck Kitagawa B-212 15X (300mm) mm dia. Various tools pcs. Tool setter Chip conveyance. Length: 3550 mm, Height: 1870 mm, Width: 2000 mm, Weight: 5200 kg

Heilig V-Mix 1.250 VDR with hygiene rounding off • Volume with water filling 1,250 litres • Usable volume in the range of approx. 100 – 1,000 litres, depending on the product • Max. filling weight 1,000kg • Mixing screw drive 3.00kW • Swivel arm drive 0.37kW • All metal parts in contact with the product are made of AISI 304 stainless steel

Heilig V-Mix 1.250 VDR with hygiene rounding off • Volume with water filling 1,250 litres • Usable volume in the range of approx. 100 – 1,000 litres, depending on the product • Max. filling weight 1,000kg • Mixing screw drive 3.00kW • Swivel arm drive 0.37kW • All metal parts in contact with the product are made of AISI 304 stainless steel

Thermoforming machine Stainless steel Compact and easy to use Up to 100 memorised programs Up to 10 cycles per minute 055 m³/h Power: 9.5kW Voltage: 400V / 50Hz / 3phs

Key data: 4000 mm, 2000 mm

Cutting surface: 2,000 x 4,000 mm Top height: 290 mm Weight: 5 ton

Stanko 2K52 Admission in drilling-spindle (morse): Mk3 Base dimensions (1) Table dim (2) : 1.120 × 550 mm Longitudinal travel drilling-head (X-axis): 500 mm DEPTH OF THROAT: 800 mm Speeds: 63 tot ~ 1.600 rpm Height: 1900 mm Weight: 900 mm ACCESSORIES: 2000 mm Cooling system: 1620 kg Clamping system: yes

Mechanical press/eccentric press by Stankoimport, model: 2225 (СТАНКОИМПОРТ Модель 2225). Material capacity: sheet thickness/width 18/190mm, max. tensile strength 500MPa. An inspection can be arranged by appointment.

Key data: 3000 mm, 2000 mm, 1150 mm

X-axis: 3,000 mm Y-axis: 2,000 mm Z-axis: 1,150 mm Table dimensions: 2,800 x 1,500 mm Spindle mount: ISO 50 Spindle speed: 30 - 6,000 rpm Tool changer: 50 places CNC Control: OSP7000M Stand spacing: 2,050 mm Equipped with: - Angle milling head - Touch probe button - Double chip conveyors (recently renewed) - Cooling plant (recently renewed) -Operating instructions Country of origin: Japan Machine LxWxH: 9,000 x 3,500 x 3,500 mm +/- Machine weight: 27,500 kg

sheet width: 2540 mm plate thickness: 6 mm rear stop: 900 mm down holder: 14 Stk no. of strokes: 20 Hub/min total power requirement: 10 kW dimensions of the machine ca.: 3100 x 2200 x 2600 mm weight: 5000 kg Features: - Central lubrication - Electric rear stop - 1x side stop 2350 mm - 2x front support arms with stop 1700 mm - Front finger guard - Spare blade (used) - Foot switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

I sell an automatic pneumatic Weinig Grecon Dimter Opticut 200 Elite Built in 2006. Motor power 7.5kW Entrance table automatic 4.10m (continuous system) Exit table automatic 6 ejectors on the right outlet table. Optimization with automatic defect detection and automatic cutting diagram programming. Available the same. CE equipment. Documents included.

Manufacturer: Tox Pressotechnik Model: MAG 075.222.A.001 Year of Manufacture: 2008 Condition : Excellent Min./Max. Air Pressure: 0.3 / 0.5 MPa ; 3 / 5 bar Max. Press Force at Max. Air Pressure: 680 kN Total Stroke: 100 mm Power Stroke: 11 mm Machine Weight (without tool): 3420 kg Find more here - / Contact us at -

Center height: 210mm, distance between centers: 1500mm, swing over bed: 420mm, spindle bore: 57mm, speed range: 38–2000/min, main drive: 7.5kW, weight: 2t. Equipment: 3-jaw chuck, tailstock, steady rest, quick-change tool holder, coolant system, lighting, year of manufacture: approx. 1980–1985. No data sheet, fully functional, well maintained, ready for immediate use. Only slight oil moisture in the lower area due to age, without relevant oil loss. An on-site inspection is possible.

Two identical DEK stencil printers are available. Printing speed: 150mm/s, max. printing dimensions X/Y: 510mm/489mm, max. stencil dimensions X/Y: 510mm/508mm, min. stencil dimensions X/Y: 71mm/38mm, max. product thickness: 6mm. Machine dimensions X/Y/Z: approx. 1350mm/1400mm/1500mm, weight: approx. 800kg. Documentation available. An on-site inspection is possible.

Recon Part Number: 1231 3041 We will be happy to send you our current stock list. Attention: We also have various other RECON parts from different manufacturers / types available.

Number of sanding units: 4 St. sanding width: 190 mm Sanding height max.: 180 mm Control: ja weight: 3300 kg Dimensions (L/W/H): 2600x920x1890 mm Dust suction hood: 2x180, 2x120 mm Löwer DSM 2004 Double-Sided Sanding Machine --------------------------------------------- 4-Belt Sander + Disc Unit (Top/Bottom) Manufacturers Description: --------------------------------------------- Double-sided, four-belt, single-wood sander for sanding solid wood such as window frames, etc. Highly stable, top-quality design with innovative details. Suitable for high continuous loads, even with high material removal rates. - Sequentially arranged grinding units for roughing, fine grinding, and finishing, each from above and below 1. Belt grinding unit with heavy steel roller 2. Belt grinding unit with rubberized roller and shoe 3. Finishing unit with fiber brush (see optional equipment below) - Direct-dri ...

Formwork panels 21mm, used 1,777 m² used formwork panels 21mm EUR 11,00 per m² ---------------------------------------------------------------------- --------- Plywood 21mm, used 1.777 m² used plywood 21mm EUR 11,00 per m²

Sr. No.: 802245

Brand Ferromatik Milacron GmbH Type eQ-280 - 2290 Bj Ud Dvsw Ebpweycjlp Year of manufacturing 2023 Machine hours 50 hours Clamping Force 2.800 kN Screw ø 60 Mm Injection Pressure 2.238 bar Shotvolume max. 905 cm3 Max. distance between holms 710 x 660 mm Min. mould height 250 mm Distance between plates max. 1.400 mm Dimensions (LxWxH) 8.500 x 2.100 x 2.500 mm Weight 18.400 kG

Offer 25359 Specifications: Cutting range at 90° around 250 mm - flat 275 x 180 mm - Mitre adjustable left Schnittb. at 45° around 200 mm - Schnittb. flat at 45° 190 x 180 mm - Schnittb. flat at 30° 130 x 110 mm - Material support height approx. 920 mm Saw blade dimensions 3100 x 27 x 0.9 mm Cutting speed infinitely variable 15 to 100 m/min hydr. Lifting – lowering the saw frame Upper stroke limit of the saw frame Cutting pressure infinitely adjustable 0 - 10 m/min hydr. Material vise Micro Spray Coolant Device - Total drive power 400 V / 2.2 kW - Space requirement approx. W 2400 x H 1600 x D 1800 mm - Weight approx. 1300 kg - 3 x roller conveyor 1500 mm

Clamping Force: 150 ton // Mould Height (Max): 730 mm

Continuous vacuum filler for straight filling, portioning, and twisting Optional: holding and twisting device All in one 240 liter hopper with counter arm and reinforced scraper, tipping, and hopper lock Filling pressure: up to 35 bar Portioning speed: up to 380 portions per minute Hopper inlet 100 mm diameter Integrated vacuum pump Integrated lift Program memory for 99 filling programs Portion weight: from 5 to 60.000 g Electric power: 7.5 KW Machine dimensions in cm: Width: 210 Lenght: 170 Height: 190

A continuous Schur flow pack machine is available. Output rate: 30m/min, max. packaging capacity: 80bags/min, min. bag dimensions X/Y: 100mm/100mm, max. bag dimensions X/Y: 450mm/500mm, bag material: PE/CPP/films/laminates, material thickness range: 0.04mm-0.14mm. Weight: approx. 650kg, control system: Siemens Simatic PLC S7-300, operating hours: 256h. Documentation available. An on-site inspection is possible.

Max. bending length: 2540 mm Max. sheet thickness: 3 mm steel Manual and automatic bending process possible Bending angle adjustable via potentiometer Lifting height of the upper beam and material thickness can be preselected via dip switch Bending rail ground Weight: 3400 kg

Injection moulding machine for PET preforms

Materials: LDPE, LLDPE, HDPE // Film Width (Max): 2100 mm

Maximum Diameter: 110 mm // Minimum Diameter: 32 mm

Materials: CPP // Film Width (Max): 2800 mm

Screw Diameter: 27 mm // Throughput: 100 kg/h

EPS Shape Moulding Machines

Number Of Colours: 7 // Rim Diameter (Max): 160 mm

Volume (Ml): 2000 ml // Format: Slim

Output: 18000 U/h

Output: 18000 U/h

10 Meter vacuum tank Leba 225 doorsnede Bs Ud Dswmrhajvycsww

Deze trekwerk zaag van ons gerenommeerde merk SICA S.p.a. staat bij Plastima Used Machinery in de machine opslag. De zaag komt uit 2008 en verkeert in gebruikte, maar goede staat. Merk: SICA S.p.A Bwj Ud Dotpg Avovycow Type: TRS/SY 32-250 C 2000 Serienummer: 0817501 Bouwjaar: 2008 Spanning: 400 V Vermogen: 6 kW Buisdiameter max. 32 - 250 Ø (mm)

Refurbished plast agglomerator for sale. Trial run possible for a fee of 1500€. The fee will be charged at the time of purchase.

• Fully automatic inspection machine for prefilled syringes with water-based, clear solutions, not suitable for protein solutions • Maximum output 12,000 ampoules/hour • For prefilled syringes diam. 6.85-14.45 mm, height incl. flange and needle guard max. 120 mm, flange diam. max. 24 mm, depending on format set • Automatic syringe feed from upstream machine via screw conveyor • Syringe turning station for foreign objects and liquid residues in the needle • Rotary device for foreign object detection • 3 CCD cameras for - Reflective foreign object detection station (foreign objects such as glass, white spots, etc.) - Non-reflective foreign object detection (colour dots, colour blocks, metal chips, etc.) - Reflective or non-reflective foreign objects and aluminium hydroxide detection station • 1 inspection station for flange damage and missing pistons • 1 inspection stat ...