jenbacher type 2 used for sale

Perfect binder Horizon Horizon BQ-260, 1 station, hot melt, envelope feeder Machine number 087222 , in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment

Optional roller conveyor D-300 x 2000 mm = EUR 550(6 rollers / 60 diameter / 300 Kg load 1 Mtr) Optional roller conveyor D-300 x 3000 mm = EUR 650(10 rollers / 60 diameter / 300 Kg load 1 Mtr.)

For sale is a completely brand-new, unused industrial pump of the absolute top class: a KSB Etabloc (model: ETB 065-040-200 GGSAV11D200752) in a compact block design, directly coupled to a highly efficient 7.5 kW Siemens energy-saving motor. The KSB Etabloc series is the global benchmark for reliability, ease of maintenance and space savings in industrial use. Since it is a block pump, the impeller sits directly on the extended motor shaft. This saves valuable installation space and makes the time-consuming, millimetre-precise alignment of the coupling completely superfluous – set up, flange, connect, run. Thanks to the large 200 mm impeller and the powerful 7.5 kW motor power, this unit is perfect for demanding applications with higher heads and pressures (e.g. in industrial water supply, cooling systems, air conditioning systems or process engineering processes). Highlights  ...

- Multi-Tasking Machining in a Single Machine Setup - Sub spindle for overtaking with full C-Axis - The INTEGREX IV series can finish all machining processes. - High speed, advanced milling spindle that can tilt up to 240 degrees swiveling. - Lower turret with rotary tool spindle so livew tooling - Chip conveyor with coolant and 15 Bar iKZ - Double chuck KNCS-N 210-53 SMW Autoblock - MAZAK Flex -GL150F Gantry Loader - Gripping range 200 x 120 length x 15 Kg

Key data: 3333 KW, 4850 kVA, 11000 V

Complete Natural Gas Power Plant – 3333 kW MWM 2032 V12 Fully integrated natural gas power plant based on a high-performance MWM 2032 V12 generator set, delivering reliable and efficient energy production. The plant includes a complete heat recovery system, featuring a heat recovery boiler and heat exchangers, as well as emergency table radiators, making it suitable for combined heat and power (CHP) applications. Technical Specifications: Power Output: 3333 kW Frequency: 50 Hz Voltage: 11,000 V Engine Model: MWM 2032 V12 Year of Manufacture: 2008 Year of Installation: 2013 This is a complete, ready-to-operate solution for industrial or utility-scale energy generation. For more information or to arrange an inspection, please get in touch.

Multifunctional punch, punch press, hole punch, pneumatic hole punch -operated: pneumatically -Year of manufacture: 1995

- Covex and Concave grinding - 6 steady rest included - 2 steady rest hydrostatic - Coolant system with magnetic filter   - Measuring system with 5 arms caliber: - Arm 1: Working area 1300 to 1600 mm - Arm 2: Working area 1000 to 1300 mm - Arm 3: Working area   700 to 1000 mm - Arm 4: Working area   400 to   700 mm  

- Rebuild in 2010 with SIEMENS TOUCH - Rebuild cost EUR 200.000 - Distance measuring device with double taster - Big package with pressing tools in several diameters

Transformer, converter, three-phase autotransformer, three-phase transformer -Transformer: from CNC machining center Mikron VC500D -Type: PTNo.. PTC 2500/139 -Power: 1200 VA -Dimensions: 215/210/H255 mm -Weight: 30.2 kg

Side channel compressor, side channel blower, ring blower, vacuum pump, blower -Manufacturer: Siemens, side channel blower, side channel compressor with reversing valve -Type: Elmo-G 2BH6 100-0AC12 -Drive: 2.2 kW -Speed: 2860 rpm -Dimensions: 375/335/H385 mm -Weight: 30.7 kg

- Pressure 0 - 250 Bar - T Size T-22 - Opening force 35 Ton - Closing force 150 Ton - Distance between column 2130 mm - Table height over floor 770 mm - Upper table rotation 180 Grad

- Bowl volume 220 liter - Out side diameter 1200 mm - Width processing channel 300 mm - Overal channel length 2800 mm - Power 2 kW - Rosler Switch Unit 

Height=1.67 m, Overall length= 3.65 m, Overall width= 0.96 m, Net weight= 365 kg,

- Drilling, Milling, Tapping for heatexchanger bases and plates   - Swivable A Axis + 25 to - 15 Degrees - Filtration and Coolant system 1000 L - Cip conveyor 2000 x 1200 height out put - Milling tool changer Tower Station 20 positions - Capacity ELB Drilling 3 - 35 mm  - Capacity Milling 250 ccm/Min   - Feed rates all axis 15.000 mm/Min X-Y-W-Z - Cutting hours ca 15.000 - Large tooling package

Height=1.84 m, Overall length= 1.77 m, Overall width= 0.95 m, Net weight= 170 kg,

Manufacturer: Haas Model: ST-20Y Year of Manufacture: 2016 Voltage: 400V Phase: 3 Frequency (Hertz): 50/60 Hz Full Load Current: 27 Amps Largest Load Current: 18 Amps Short Circuit Interrupting Capacity: 10,000 Amps Wiring Diagram Reference: 96-0284 Short Circuit Current Rating: 5,000 Amps RMS symmetrical Find more here - / Contact us at -

SEYDELMANN AU 200 WITH LIFT

CTP thermal plates 58000 plates hand feeding plate stacker Server Workstation TIFF shooter

Sm 102-10P Autoplate All 3 washes Perfector 5x5 Cp 2000 only 84 mil Test Print is Possible

Manufacturer: König Maschinen Gessellschaft m.b.h. Austria Type: KGV Combi 2000 / 40, ( DD ) – RR 800- K5-SA5- SP5-FS-VO-MO (WB) 800-ABI 800 Year of manufacture: 2001 Control panel: Siemens Simatic The plant is controlled by a control panel with visual display Electricity: 3 x 400 V, 50 Hz, 13.5 kW Dimensions: Total length 11 meters The line is intended for the continuous production of weighed dough pieces which are automatically transferred from the main machine. ( Rex Automat ) The machine offers the following functions: - Rex automatic weighing and reception of the kneaded dough pieces. - Proofing in controlled air conditioning - Shaping of dough pieces, e.g. long rolling - Cutting of dough pieces - Flouring of dough pieces - Patterning of dough pieces - Seeding of dough pieces, e.g. sesame seeds, poppy seeds, sunflower seeds, etc. - Transfer of dough pieces to  ...

Key data: 3240 mm, 5 mm

Max. bending length: 3240 mm Max. sheet thickness: 5 mm steel Upper beam stroke: 350 mm Program control via touchscreen (back gauge, bending angle adjustment, stroke of the upper beam, sheet thickness, number of pieces, etc.) Motorized height adjustment of the bending beam (adjustment of the sheet thickness) Manual and automatic mode possible Controlled backgauge with spring fingers Central lubrication Various additional bending and reinforcing rails Operating instructions 5700 kg

Max. saw blade diameter: 250 mm Manual material tensioner Saw blade lubrication

Cap feeder for various types of caps, tubes, small bottles, etc. Stailess steel Year 2005

turning diameter: 376 mm turning length: 1245 mm control: Siemens 828D greates pass round over bed: 780 mm swing diameter over slide rest: 630 mm max. turning diameter: 376 mm spindle turning speed range: 2800 U/min spindle drive motor: 22/18,5 kW spindle nose: ASA A2-11 spindle bearing diameter: 160 mm spindle bore: 115 mm bar material dia.: 102 mm c-axis: 0,001 ° chucking diameter: 255 mm Number of tools: 24 St. travel -x axis: 260 mm travel -z axis: 1350 mm travel -y axis: 105 (+/- 52,5) mm 2nd Spindle:: spindle turning speed range: 4500 U/min spindle motor: 7,5/5,5 kW spindle passage: 62 mm spindle nose: ASA A2-5 total power requirement: 59,5 kVA weight of the machine ca.: 7,9 t dimensions of the machine ca.: 4,4 x 2,1 x 2,2 m Equipped with: - Siemens 828D control system - Chip conveyor - Counter spindle - Workpiece holding arm - High-pressure coolant pump - 12-position turret, 7.5 ...

Used fluidised bed dryer mady by Bühler, model OTWG-280, new 1995. The dryer consists of a blower, piping. All elements are made of acid-resistant sheet metal, the blower is resistant to high temperatures. The whole set is manufactured by Buhler. Technical data: - Weight 1750 kg - Content m³: 6 - Max. operating vacuum up to 250°C. bar: + 0.1 - Max. operating vacuum up to 150°C. bar: - 0.1 - Max. operating temperature: 250 C°.

diameter: 20 - 100 mm workpiece length: 3000 - 12000 mm number of rolls: 2 Control: Siemens SPS/PLC Tensile Strength: 70 kg/mm² feed speeds: 60 m/min Angle: 10 - 22 ° main drive motor: 132 kW roll speed: 180 U/min total power requirement: - kW weight of the machine ca.: 24,5 t dimensions of the machine ca.: 7500 x 3000 x 2850 m Machine was retrofitted (Eletric) and not much used 2 roller straightening machine, fully hydraulic and equipped with: - Siemens PLC/SPS control system - Hydraulic roller - Loading table with chain transport - Infeed channel with pressure roller - Pressure rollers - Gearboxes and motors - Siemens Sinamics drives - New electrical system - Hydraulic units - Spare set of rollers - Machine with complete hydraulic adjustment -- Upstroke of upper Roll: 210mm -- Hydraulic cap Stroke: 13mm -- Side Guides and Scrapers set at Exit: 20+35mm 35+65mm  ...

Key data: 2000 mm, 6 mm

Köllschen AM 2000 × 6, built in 1970: Working width: 2,000 mm Max. sheet thickness: 6 mm Motor power: 12.5 kW

Presse à injecter ENGEL VC 200/80 Année : 2005 Nombre d’heures : 79 000 h Force de fermeture : 80 T Course d'ouverture : 450 mm Epaisseur moule min : 250 mm Dimensions des plateaux : 670 x 600 mm Diamètre bagues de centrage : 125 mm diamètre de la vis : 35 mm Volume injectable : 154 cm3 COMMANDE : CC200 1 noyau hydraulique interface robot : Euromap 67 DONNÉES GÉNÉRALES : Puissance de chauffage installée : 6,8 kW Puissance d'entraînement de la pompe : 15 kW Puissance totale connectée : moteur + chauffage Poids total : 5.200 kg Dimensions totales L x l x H : 4,0 x 1,4 x 2,0 m

2 x Injection Molding Machines Manufacturer. Arburg Type : 270S-250-60 BJ 1996

Specifications: - Center height 220 mm - Turning diameter over bed 440 mm - Center height over bridge 330 mm - Turning diameter in the offset 630 mm - Center height / turning diameter via support 135 / 270 mm - Center width 1000 mm - Spindle bore 52 mm - Mounting cone of the tailstock quill MK 4 - Travel of the tailstock quill 310 mm - 18 spindle speeds 25 - 2000 rpm - Feeds longitudinal + flat - Metric Threads / Withworth Threads / Module Threads / DP Threads - Drive 400 V / 6 kW - 4-jaw chuck with interchangeable jaws and center punch, new Multifix size B with 3 inserts

A GM Gera bottle cleaning system is available. Throughput capacity with 1l PET bottles: 13000 bottles/h, bottle cells: 3240 pieces, cells per basket row: 18, cell pitch: 110mm, chain pitch: 169mm, total treatment time: approx. 15min, total immersion time: approx. 7.5min, housing material: stainless steel (SST). System dimensions X/Y/Z: approx. 8900mm/4200mm/3350mm, weight: approx. 23650kg, operating hours (09.2025): approx. 14300h. Documentation available. An on-site inspection is possible. Expected to be available from mid-March 2026.

• For single and multiple containers • Straight infeed conveyor with stacking device • For PE film • Film width 30\endash 200 mm • Film thickness 20\endash 100 µm • Roll diameter max. 300 mm, core diameter 70/76 mm • Output max. 24 cycles/min, depending on format • PLC Eberle PLS 508 with Eprom • Enclosure with safety switches • Connection 400V/50Hz/8.5kW This machine is offered at a special price and sold as-is without technical inspection.

Injection moulding machine Arburg 470C 2000-675 BJ 2007

Make: TRUMPF Type: TRUMATIC 2000R Year of Make: 2001 Working area: 1270 x 1270 mm Punching force: 18 tons Max. sheet thickness: 6.4 mm Max. workpiece weight: 75 kg Max. punching diameter: 76 mm Max. speeds: 90/60/108 m/min Accuracy: +/- 0.1 mm Length: 5100 mm Width: 5800 mm Height: 2070 mm Weight: 9200 kg Accessories: TOPS 2000 CAM software, tool holder, Very good condition, only thin sheets

gebr. CNC press brake Darley, type EHP 200, built in 1989 Press force: 2000kN Working width: 5200mm Power: 15kW Oil capacity: 160l Weight: approx. 20,000kg Tools & Accessories Included

table length: 2400 mm table width: 1200 mm table height (lateral area): 200 mm weight: 981 kg dimensions of the machine ca.: 2400 x 1200 mm SIEGMUND Authorized Dealer - All items available! SPECIAL OFFER SIEGMUND Welding Table Retro 2400x1200x200 incl. accessories Product description - High-quality steel S355J2+N + plasma nitriding - Material thickness approx. 24.5–27 mm - Hole Ø 28 mm - Holes surface 100x100 mm grid - Corners, edges, and holes rounded - Side panel height 200 mm - Side panel holes in diagonal grid - Construction reinforced with ribs - Grid lines enable precise assembly The welding tables are equipped with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - Corrosion-resistant / higher load capacity Features: - 28 hole pattern / dimensions 2400 x 1200 x 200 mm - Plasma-nitrided version with scale - Includes  ...

gebr. Guillotine shears, Helmut Lotze, type 205.3000x16, built 1992 Working width: 3040mm Max. sheet thickness: 16mm Stand width: 3040mm Throat: 200mm Stroke width: 1000mm Motor power: 45kW Stroke rate: 22/min.

different sets for an F 200 3 jaw chuck (base jaws on top jaws)

1 gebr. 3. - Baking Chuck Forkardt F 250

Manufacturer: Ebu Model: STA 200/2000 Year of Manufacture: 2005 Overhaul: 2016 ( is currently equipped with a longitudinal transfer and has run very little since the overhaul) Punching force: 200 tons Installation space: 2000+800 Ram stroke: 16–160 Plunger adjustment: 0–120 mm Advance max.: 9999.9 Max. bandwidth: 300 Speed range: 30–150 Find more here - / Contact us at -

Manufacturer: UnoTech Model: 200 V5H4 RB Year of Manufacture: 2017 Loose hydraulic unit with 4x 75kW pumps Find more here - / Contact us at -

sheet width: 2000 mm plate thickness: 3 mm rear stop: von Hand, 750 mm number of support arms: 2 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine type: MIG/MAG welding machine Make MERKLE Type RedMIG eco 2800 K complies with the EU Eco-Design Regulation No 2019/1784 Connection voltage 3 x 400 volts Adjustment range 30 – 280 amps Duty cycle 30% ED at 280 amps 60% ED at 210 amps 100% ED at 180 amps Current setting 14 switching levels Cooling transformer by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feeder 4-roller drive DV 26 Fuse 16 Ampere Dimensions L x W x H 800 x 460 x 655 mm Weight 97 kg Age 12 months Condition workshop tested, very good, incl. UVV test report Scope of supply welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer 1 roll of welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece spare parts box, complete Equipped 1 pair of  ...

Drilling capacity (steel): 50mm, spindle speed: 1700rpm, reach: 45mm-1500mm, workpiece height range: 470mm-1500mm, sleeve stroke: 680mm, quill stroke: 350mm, spindle taper: MK5, max. tool weight: approx. 30kg. Machine dimensions X/Y/Z: approx. 2600mm/1100mm/3500mm, weight: approx. 4000kg. An on-site inspection is possible.

Height=2.117 m, Overall length= 0.79 m, Overall width= 0.686 m, Net weight= 135 kg,

3 assen: Y1 / Y2 / X Capacity: 220 ton x 3100 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 2600 mm Max stroke: 200 mm Max distance between table -- ram: 450 mm Depth of throat: 300 mm Locking speed: 100 mm/sec Working speed: 8 mm/sec Returning speed: 80 mm/sec Electric motor (power): 19 kW Length: 3500 mm Depth: 1900 mm Height: 2700 mm Weight: 10,5 ton

Height=1.991 m, Overall length= 0.75 m, Overall width= 0.686 m, Net weight= 141 kg,

Height=2.113 m, Overall length= 0.75 m, Overall width= 0.686 m, Net weight= 141 kg,