jenbacher type 2 used for sale

table length: 1200 mm table width: 800 mm weight: 177 kg With the new mobile lifting table from Siegmund you can get there quickly and easily to the ideal working height. Set new standards in ergonomics as well Flexibility and benefit from the wide range of possible uses. The stable steel construction offers stability even during the Adjustment of the working height. Maximum load capacity including perforated plate 500 kg Working height between approx. 700 and 1,000 mm For clamping on Premium Light with a clamping bolt if the spacer ring article no. 280653.N required. including 28 mm perforated plate (light): - Premium Light - through hardened tool steel X8.7, - plasma nitrided and BAR coated - Hole Ø 28 mm - Drilling surface 100x100 mm grid - Material thickness 15 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic injection moulding machine manufactured in 2012. This Krauss Maffei 300-2000 CX features a clamping force of 300 t and a screw diameter of Ø 70 mm. It has a maximum mould opening of 1000 mm and tie bar spacing of 630 × 630 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 300-2000 CX machine we have for sale. Contact us for further details.

; Gross weight [kg]: 1750; Engine: Cummins 6BT5.9-G1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolat heater and battery charger; Water Tank Volume [l]: 200

; Gross weight [kg]: 14470; Engine: Caterpillar 3516B; Accessories: Control Panel, Caterpillar 3516B Genset from the official CAT Rebuild Program., Engine is completely rebuild by CAT or even unused/surplus., All other components are usually new., Comes with the standard CAT factory warranty.

weight max. in kg: 250 kg arm length: 4000 mm height: 3425 Unterkante Ausleger total column height: 4.025 mm swivelling range: 270 Grad Total weight, approx.: 375 kg Description: - Load capacity 250 kg - projection 4000 mm - Construction height 4025 mm - Crane lacquer in color RAL 1007 daffodil yellow - Calculation basis DIN 15018 - Crane classification H2 / B2 - Operating location hall operation - Size / bracket profile LS36 / FormC 110x90 - Height of the lower edge of the boom 3425 mm - Operating voltage 3 / PE ~ 50 Hz 400 V - Direct control type of control - Degree of protection IP55 - Swivel range, nominally 270 ° - Panning by hand including: - Anchor rods size LS 36 - Consists of 8 pieces M24 mm x 800 mm, with 1 steel template (420/8) for - Fastening to the foundation, including accessories Electric chain hoist: - Chain hoist type GM 2 250.6-1, 1-leg - painted in color RAL 5017 - t ...

x-travel: 280 / 300 mm y-travel: 250 / 270 mm z-travel: 300 / 310 mm turning speeds: 45 - 2240 U/min turning speeds: 18 Stufen spindle taper ISO: 40 quill stroke: 60.0 mm table:: 670 x 320 mm table load: 150 kg feed range: 12.5 - 630 mm/min feed: 18 Stufen rapid traverse: 1.200 mm/min workpiece weight: max. 150 kg T-slots: 5x 12 x 63 mm total power requirement: 1.6 kW weight of the machine ca.: 1100 kg range L-W-H: 1265 x 1080 x 1620 mm New price ~ 25.000 Euro () Special price upon request Features: - Robust electric-driven universal milling machine - ACURITE 3-axis digital display with pivoting control panel, front right including emergency stop button - Electric adjustment of all axes (X/Y/Z axes) Rapid traverse in all 3 directions - Pivoting milling spindle guard - Coolant system - Lower chip tray - Vertical milling head with quill adjustment Milling head rotation 90° Tool hol ...

pressure: 200 t chamfer lenght: 3100 mm distance between columns: 2600 mm column arm: 250 mm ram stroke speed: 100 mm/sec return speed: 75,0 mm/sec work speed: 7,0 mm/min work stroke: 180 mm dayligth: 415 mm oil volume: 200 ltr. table height: 900 mm voltage: 400 Volt range L-W-H: 4450x2050x2650 mm Furnishing: - DELEM - CNC control model DA-58T - controlled axes: Y1 - Y2 and X - FIESSLER AKAS - laser protection in front of the machine - Deer foot upper tool - Universal die block - manual table crowning - Safety device: light barrier behind the machine - 2 front support arms - SIEMENS - electrical system - BOSCH / HOERBIGER hydraulic system - CE mark / declaration of conformity - Operating manual: machine and control - Safety manual: press brakes The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

; Gross weight [kg]: 2238; Engine: Caterpillar C7.1; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 418

Transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer -Manufacturer: ismet, transformer -Type: IST 380/220 V -Power: 0.4 kVA -Technical data: see photo of the nameplate -Dimensions: 150/107/H130 mm -Weight: 7.2 kg

turning length: 2000 mm turning diameter: 560 mm turning diameter over slide: 350 mm turning speeds: 25 - 1500 U/min swing diameter over bed slide: 350 mm turning dia. in gap: 785 mm quill travel: 180 mm quill:: 5 MK spindle bore: 105 mm engine output: 7,5 kW spindle taper: DIN 55029 D 1-8 weight of the machine ca.: 2720 kg. Equipment: - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-315 mm / D8 - Clamping disc 450 mm - Fixed steady rest - passage diameter max. 180 mm - Follow-on steady rest - passage diameter max. 120 mm - 2 centering points - Initial filling with Shell Tellus 46 - Motor with magnetic brake in accordance with CE standard - Foot pedal with brake function in accordance with CE - Coolant system - Quick-change tool holder with 4 inserts - Protective device for quick-change tool holder - Slip clutch - LED machine light - Change gears - Reduction sleeve - C ...

width of the strips: 100 mm band length: 920 mm band speed: 7.0 m/sec loading area: 300 x 150 mm motor: 0.44 KW motor: 220 Volt range L-W-H: 470 x 370 x 210 mm MADE IN GERMANY Furnishing : - robust electric motor belt sander - strong drive motor - including sanding belt - including workpiece stop - manually adjustable deflection pulley - Machine base - Connection cable + plug - Instruction manual in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 225 mm capacity 90 degrees: flat: 245 x 150 mm capacity 90 degrees: square: 200 x 200 mm capacity 45 degrees: flat: 160 x 140 mm capacity 45 degrees: round: 160 mm capacity 45 degrees: square: 140 x 140 mm capacity 60 degrees: flat: 110 x 80 mm capacity 60 degrees: square: 90 x 90 mm capacity 60 degrees: round: 90 mm vice: 245 mm turning speed range:: 46/92 m/min saw band length: 2450 x 27 x 0,9 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 240 kg dimensions of the machine ca.: 1.530 x 900 x 1.720 mm Equipment: - compact / robust manual band saw - with one-sided miter device up to 60° left - hydraulic lowering of the saw bow stepless feed adjustment limit switch at the end of the cut - 2x saw band speeds - saw band guide made of hard metal plates - manual vice with quick lock - machine base with - coolant device - manual saw band tension (star gri ...

sheet width: 1270 mm plate thickness: 1.75 mm ST plate thickness: 2.00 mm ALU plate thickness: 2.50 mm KU thickness at Niro-steel: 0.80 mm distance between columns: 1300 mm daylight opening: OW ~ 380 mm work height max.: 900 mm adjustment: UW 60.0 mm bending angle max.: 180 ° weight: ca. 200 kg kg range L-W-H: 2000 x 520 x 1500 mm good condition () Bending splint e.g. reground Furnishing: - robust, manual folding machine - manual lifting by hand lever (incl. gas pressure damper) - manual clamping of the upper beam by means of a handwheel on the side - manual lower beam adjustment - Bending angle fixed stop, with analogue angle display - Upper beam with large opening width - Instructions / description Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9355182 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 150 mm band length: 2280 mm revolutions per minute: 2880 U/min roll diameter: 140 / 80 mm table-size: 700 x 350 mm engine output: 3.0 kW weight: 250 kg range L-W-H: 1300 x 800 x 1500 mm - Machinevideo - https://www.youtube.com/watch?v=l-XFPai2BAA Furnishing : - Horizontal belt grinder - Small, flexible all-rounder - Solid gray cast iron unit - long-lasting, good grinding results - Motorized belt oscillation approx. 10 mm - Pneumatic belt tension - Small table on the pulley for grinding radii and shapes - The entire sanding belt can be used thanks to the height-adjustable work table - Including angle and miter fence Special equipment included: - swiveling grinding unit 90 - 135 degrees - Support table on the pulley The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 180 mm capacity 90 degrees: square: 180 x 180 mm capacity 90 degrees: flat: 200 x 150 mm capacity 45 degrees: round: 115 mm capacity 45 degrees: square: 110 x 110 mm capacity 45 degrees: flat: 125 x 110 mm capacity 60 degrees: flat: 70 x 70 mm capacity 60 degrees: square: 70 x 70 mm capacity 60 degrees: round: 70 mm turning speed range:: 40 / 80 m/min saw band length: 2.130 x 20 x 0,9 mm total power requirement: 0,75 kW weight of the machine ca.: 190 kg Equipment: - compact / robust manual band saw - with one-sided miter device up to 60° left - hydraulic lowering of the saw bow stepless feed adjustment limit switch at the end of the cut - 2x saw band speeds - saw band guide made of hard metal plates - manual vice with quick lock - machine base - coolant device - manual saw band tension (star grip at the front) - 1x angle stop - 1x metal saw band - operating instructi ...

cutting diameter: 250 mm capacity 90 degrees: flat: 280 x 220 mm capacity 90 degrees: square: 220 x 220 mm capacity 45 degrees: flat: 220 x 200 mm capacity 45 degrees: round: 230 mm capacity 45 degrees: square: 200 x 200 mm capacity 60 degrees: flat: 140 x 100 mm capacity 60 degrees: square: 100 x 100 mm capacity 60 degrees: round: 150 mm vice: 285 mm turning speed range:: 36/72 m/min dimensions of saw-band: 2950x27x0,9 mm Control: total power requirement: 1,5 / 1,8 kW weight of the machine ca.: 460 kg dimensions of the machine ca.: 1150 x 1970 mm Equipment: - robust electro-hydraulic semi-automatic band saw machine (INDUSTRY) - with miter cuts from 45° right to 60° left Miter adjustment via large turntable - MEP microprocessor control EVO to control all functions front right, rotatable - optional manual or automatic lowering of the saw bow stepless adjustment of the saw bow loweri ...

pressure: 220 t chamfer lenght: 3100 mm distance between columns: 2600 mm column arm: 410 mm ram stroke speed: 180 mm/sec work speed: 10.0 mm/sec return speed: 185 mm/sec work stroke: 275 mm dayligth: 550 mm table height: 930 mm table width: 200 mm oil volume: 300 ltr. voltage: 400 Volt total power requirement: 18.5 kW weight: 11286 kg Dimensions (HxWxD): 4550 x 2250 x 2850 mm -------------------------------------------------- HIGH-SPEED hydraulic press brake with increased installation height increased cylinder stroke enlarged projection -------------------------------------------------- Furnishing: - DELEM CNC control model DA 66T - swiveling touchscreen control unit - 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm - on ball screws - controlled electr. Stop fingers Z1 + Z2 - split upper deer foot ...

width of the strips: 150 mm band length: 2000 mm band speed: 14.5 + 29 m/sek grinding width: 460 x 150 Plantisch mm Dust suction hood: 100 mm total power requirement: 4.0 kW 100% ED weight: 84.0 kg range L-W-H: 1080 x 520 x 1000 mm Standard with 2 speeds, ideal for grinding stainless steel properties - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the Sanding belt scope of delivery - Sanding belt  ...

cutting diameter: 250 mm capacity 90 degrees: square: 210 x 210 mm capacity 90 degrees: flat: 290 x 210 mm capacity 45 degrees: round: 220 mm capacity 45 degrees: square: 200 x 200 mm capacity 45 degrees: flat: 210 x 200 mm capacity 60 degrees: round: 140 mm capacity 60 degrees: square: 130 x 130 mm capacity 60 degrees: flat: 140 x 130 mm dimensions of saw-band: 2965 x 27 x 0,9 mm cutting speed: 35 + 70 m/min work height max.: 940 mm total power requirement: 1,1 / 1,3 kW weight of the machine ca.: 290 kg. range L-W-H: 1250 x 1500 x 1700 mm Equipment: - compact / robust manual band saw (INDUSTRY) for sawing solid material and profiles - ball bearing support table for miter cuts left 60° to right 45° durable + easy miter adjustment - 2x selectable cutting speeds (37 + 74 m/min.) - continuously adjustable saw frame feed - automatic shutdown at the end of the cut - manually adjustable qu ...

pressure: 220 t chamfer lenght: 4100 mm distance between columns: 3600 mm column arm: 410 mm ram stroke speed: 180 mm/sec work speed: 10.0 mm/sec return speed: 185 mm/sec work stroke: 275 mm dayligth: 550 mm table height: 900 mm table width: 160 mm back stop - adjustable: max. 800 mm oil volume: 300 ltr. voltage: 400 Volt total power requirement: 18.5 kW weight: 14000 kg range L-W-H: 5150 x 2250 x 3000 mm -------------------------------------------------- HIGH-SPEED hydraulic press brake with increased installation height increased cylinder stroke enlarged projection -------------------------------------------------- Furnishing: - DELEM CNC control model DA 66T - swiveling touchscreen control unit - 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm - on ball screws - controlled electr. Stop fingers Z1 ...

diameter of brush: Ø 250 mm width of brush: 40.0 mm turning speed range: 2850 U/min voltage: 400 Volt total power requirement: 1.3 / 1.8 kW weight of the machine ca.: 36.0 kg dimensions of the machine ca.: 415 x 467 x 356 mm Equipment: - Deburring of individual pieces and small series - Deburring of stretched round, rectangular and square tubes + flat material - Heavy, durable industrial design - with maintenance-free motor - long service life and very smooth running thanks to balanced rotor - with quality ball bearings - storage area for safety glasses - incl. 1x multi-purpose wire brush, wire thickness 0.35 mm - operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 150 mm band length: 2000 mm band speed: 29.0 m/sek grinding width: 460 x 150 Plantisch mm Dust suction hood: 100 mm total power requirement: 4.0 kW 100% ED weight of the machine ca.: 84.0 kg range L-W-H: 1080 x 520 x 1000 mm Description : - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the sanding belt Scope of delivery : - Sanding belt K 80 - Hinged protective screen - Sanding ...

width of the strips: 75.0 mm band length: 2000 mm band speed: 29.0 m/sek grinding width: 460 x 75 Plantisch mm Dust suction hood: 100 mm total power requirement: 3.0 kW 100% ED weight of the machine ca.: 66.0 kg range L-W-H: 1080 x 440 x 1000 mm Description : - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the sanding belt Scope of delivery : - Sanding belt K 80 - Hinged protective screen - Sanding ...

pressure: 225 t chamfer lenght: 3050 mm distance between columns: 2550 mm column arm: 300 mm ajustment speed: 110 mm/sec work speed: 9.0 mm/sec return speed: 130 mm/sec work stroke: 240 mm dayligth: 320 - 560 mm table height: 1000 mm table width: 200 mm oil volume: 350 ltr. operating pressure: max. 296 bar air pressure: 4.5 - 6.0 bar voltage: 400 Volt total power requirement: 18.5 kW weight: 14900 kg range L-W-H: 5180 x 2400 x 3100 mm - in checked condition - machine video - https://www.youtube.com/watch?v=ebbbzSYMxKw Furnishing: - electro-hydraulic CNC die bending/press brake - CYBELEC CNC control ModEva 12S, swiveling at the front right High-resolution graphic color screen 14 inches Representation as a line, area or volume drawing of the product Clear, concise menus in the operators language Large tools and products library - CNC-controlled back gauge adjustment (X-axis) Stop rang ...

pressure: 220 t chamfer lenght: 3760 mm distance between columns: 3250 mm column arm: 410 mm ram stroke speed: 180 mm/sec work speed: 10.0 mm/sec return speed: 160 mm/sec work stroke: 275 mm dayligth: 550 mm table height: 900 mm table width: 160 mm oil volume: 300 ltr. voltage: 400 Volt total power requirement: 18.5 kW weight: 12906 kg range L-W-H: 5100 x 2250 x 2900 mm -------------------------------------------------- Press brake with special equipment increased installation height increased cylinder stroke as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA 58T (TouchScreen) - Motorized backgauge with R-axis, on recirculating ball spindles - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC - Upper deer foot tool with PS 135 ...

cutting diameter: 250 mm capacity 90 degrees: flat: 280 x 200 mm capacity 90 degrees: square: 230 x 230 mm capacity 45 degrees: round: 190 mm capacity 45 degrees: flat: 180 x 180 mm capacity 45 degrees: square: 180 x 180 mm capacity 60 degrees: flat: 110 x 110 mm capacity 60 degrees: square: 110 x 110 mm capacity 60 degrees: round: 120 mm vice: 285 mm turning speed range:: 36 / 72 m/min saw band length: 2.950 x 27 x 0,9 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 370 kg. dimensions of the machine ca.: 1620 x 1360 mtr. Equipment: - robust electro-hydraulic band saw (INDUSTRY) - one-sided miter cut up to 60° - automatic saw bow lowering with continuously adjustable feed limit switch at the end of the cut - manual cutting function selectable - 2x saw band speeds - saw band guide made of hard metal plates - 1x saw band - 1x angle stop - moving chip removal brush - co ...

sheet width: 2600 mm plate thickness: 8,0 mm thickness at Niro-steel: 5,0 mm down holder: 12 Stück no. of strokes: 18 Hub/min oil volume: 200 ltr. cutting angle: 1,5 ° engine output: 15,0 kW weight of the machine ca.: 6.300 kg range L-W-H: 3525 x 2350 x 1700 mm ------------------------------------------------- electr. / hydraulic CNC swing cut shears with CYBELEC CNC touch screen control with electr. / hydr. Kerf adjustment ------------------------------------------------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Quantity Cutting length limitation Material preselection, including sheet thickness Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) on ball screws autom. Can be folded up at max.travel, for longer cuts - 1x side stop - 2 ...

punching pressure: 28.0 t punching cross-cut in cmm: 31 in 7.0 mm ST throat: 250 mm dayligth: 223 mm no. of strokes: 10 - 30 Hub/min oil volume: 32.0 ltr. work height max.: 1033 mm total power requirement: 3.0 kW weight of the machine ca.: 553 kg dimensions of the machine ca.: 730 x 540 x 1530 m Furnishing: - Punch quick-change device up to Ø 31 mm - green series - installed: round punch no. 5 Ø 25.0 mm and round die no. 3 Ø 25.7 mm - Free: LED lighting in the punching area - Swiveling scraper (plates exchangeable) - Various material support tables are available separately - Brace - 2-step foot switch, with double press for grain search function - electrical controls - Stroke length and stroke position continuously adjustable - integrated hydraulic unit with oil filling - Performance specifications apply to a material strength of 450 N/mm² - Main connection cable and plug for 16 amp ...

width of the strips: 100 mm band length: 2000 mm band speed: 15 + 30 m/sel tube diameter: 20 - 76 mm angle adjustable from - to: 30 - 90 Grad Dust suction hood: 2 x 75.0 mm motor speeds:: 1420 / 2660 Upm. face grinding attachment: 400 x 100 mm total power requirement: 2.5 / 3.3 kW weight of the machine ca.: 148 kg. range L-W-H: 750 x 1400 x 1200 mm Furnishing : - Constant belt tension through spring-loaded tensioning device - Standard with cylindrical grinding device - for grinding diameters of diam. 20-76 mm - Quick and easy setting of the desired grinding angle - Graphite coating on the flat grinding surface increases the sliding properties of the sanding belt - Large plan grinding surface with protective cover - Slow belt speed (15 m / sec.) - ideal for grinding stainless steel and aluminum - User-friendly tape change, quick and uncomplicated - Quick and easy changing of the grinding ...

cutting diameter: 250 mm capacity 90 degrees: flat: 280 x 220 mm capacity 90 degrees: square: 220 x 220 mm capacity 45 degrees: round: 230 mm capacity 45 degrees: flat: 220 x 200 mm capacity 45 degrees: square: 200 x 200 mm capacity 60 degrees: flat: 140 x 100 mm capacity 60 degrees: square: 100 x 100 mm capacity 60 degrees: round: 110 mm vice: 285 mm turning speed range:: 36/72 m/min saw band length: 2.950 x 27 x 0,9 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 440 kg. dimensions of the machine ca.: 1620 x 1360 mtr. Equipment: - robust electro-hydraulic band saw (INDUSTRY) - large bearing-mounted rotary table for miter cuts from 45° right to 60° left - automatic saw bow lowering with continuously adjustable feed limit switch at the end of the cut - manual cutting function selectable - saw band guide made of hard metal plates - 1x saw band - 1x angle stop - movi ...

bending radius min.: 190 mm square edge steel: 20 x 20 mm flat steel: 100 x 7 mm round bar steel: 22,0 mm L-beam: 100 x 10 mm range L-W-H: 900 x 430 x 310 mm weight of the machine ca.: 33.0 kg. properties - For precise cold and hot bending of flat, round and square steels - Stable construction for screwing onto the workbench - Infinitely adjustable bending stop - With eccentric quick release for efficient work - Readable bending angle up to 120 ° - High repeat accuracy thanks to the bending angle stop - Ideal for repair shops and locksmiths scope of delivery - Bending plate - Stepless angle stop - Terminal block with eccentric clamp - Material stop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2020 mm plate thickness: 2.0 mm distance between columns: 2100 mm angle adjustable from - to: 130 Grad total power requirement: manuell weight of the machine ca.: 1850 kg. range L-W-H: 3100 x 725 x 1350 mm Exhibition machine - like NEW not yet in use () Special price on request Equipment: - heavy/manual swivel bending machine, with counterweight - long service life thanks to robust welded steel construction - universally applicable for metalworking shops and craft businesses - quick and easy bending process using a bow handle - all bearings and guides in a stable design - easy adjustment of the upper beam for efficient work - manual adjustment of the lower beam - manually adjustable angle fixed stop with analogue degree display The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2065 mm plate thickness: 1,20 mm daylight opening: 30,0 mm bending angle max.: 0 - 135 ° total power requirement: manuell weight of the machine ca.: 500 kg. dimensions of the machine ca.: 2400 x 1115 x 1150 mm - Universally applicable bending machine for plumbing and repair shops - Robust construction in a modern design - easy adjustment of the upper beam by means of a foot pedal, Hands are free for the workpiece - manual bending machine for standard bending tasks - segmented upper beam for a large number of bending options - An auxiliary cylinder supports the bending process when folding - faster and easier bending process using a bow handle - easy adjustment of the lower beam to the respective sheet thickness - high upper beam for the production of high-edged profiles Furnishing : - Segmented upper cheek - back gauge - bending segments 38 | 38 | 38 | 50 | 50 | 50 | 50 |  ...

sheet width: 2065 mm plate thickness: 1,20 mm daylight opening: mit WZ 35,0 mm daylight opening: ohne WZ 60,0 mm bending angle max.: 0 - 135 ° total power requirement: manuell weight of the machine ca.: 520 kg. dimensions of the machine ca.: 2400 x 1115 x 1150 mm - Segmented upper beam for a large number of bending options - Universally applicable bending machine for plumbing and repair shops - High upper beam for the production of high-edged profiles - Quick and easy bending process using a bow handle - Easy adjustment of the upper beam for efficient work - The bending angle is set using a scale - Individually removable segments for bending boxes - Robust construction in a modern design Furnishing : - segmented upper beam + bending beam - Foot clamp - Fixed stop for angle adjustment - back gauge - bending segments 38 | 38 | 38 | 50 | 50 | 50 | 50 | 76 | 76 | 101 | 127 | 152 | 203 | 25 ...

sheet width: 2020 mm plate thickness: 2,0 mm daylight opening: 124 mm bending angle max.: 0 - 135 ° work height max.: 930 mm total power requirement: von Hand kW weight of the machine ca.: 1.010 kg dimensions of the machine ca.: 2,75 x 0,56 x 1,26 m characteristics - Easy to use swivel bending machine - Flat guide for exact movement of the upper beam - Manually adjustable bending angle using a scale - Robust welded steel construction, designed for heavy use - Large opening width for processing tall workpieces - Optionally with back gauge for series work - Quick and easy bending process using a bow handle - Workpiece clamping by means of a large lever The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2020 mm plate thickness: 2,0 mm daylight opening: 122 mit Segmente mm bending angle max.: 0 - 135 ° work height max.: 930 mm total power requirement: von Hand kW weight of the machine ca.: 1020 kg dimensions of the machine ca.: 2,75 x 0,56 x 1,26 m characteristics - Segmented upper beam for a large number of bending options - Universally applicable bending machine for plumbing and repair shops - High upper beam for producing high-edged profiles - Quick and easy bending process using a bow handle - Easy adjustment of the upper beam for efficient work - The bending angle is set using a scale - Individually removable segments for bending boxes - Large opening width for processing large workpieces - Robust construction in a modern design scope of delivery - Segmented upper cheek - Biegesegm. 25 | 30 | 35 | 40 | 50 | 75 | 100 | 150 | 200 | 300 | 500 | 510 mm The data for this  ...

sheet width: 2035 mm plate thickness: 4,5 mm ST thickness at Niro-steel: 3,0 mm VA bending angle max.: 0 - 135 ° daylight opening: 100 mm back stop - adjustable: 70 - 600 mm total power requirement: 5,5 kW weight of the machine ca.: 4145 kg dimensions of the machine ca.: 3300 x 1550 x 1900 mm Description . - Full hardened structure - BEIJER 7 ”touch screen control Software with 40 programs and up to 50 steps 7-inch touchscreen built into the side stand - with manual backgauge, adjustable from behind - Electronic components are quality components from SCHNEIDER - electrical cabinet is integrated in the side stand - Adjustment of the hydraulic pressure to the material thickness - Adjustment of the material thickness on the bending beam is easy with a mm scale - Handle for adjusting the material thickness on the upper beam is hidden in the side stand - Segmented upper cheek The dat ...

sheet width: 2540 mm plate thickness: 4,5 mm ST thickness at Niro-steel: 3,0 mm VA bending angle max.: 0 - 135 ° daylight opening: 100 mm back stop - adjustable: 70 - 600 mm total power requirement: 5,5 kW weight of the machine ca.: 6275 kg dimensions of the machine ca.: 3900 x 1700 x 1900 mm Description . - Full hardened structure - BEIJER 7 ”touch screen control Software with 40 programs and up to 50 steps 7-inch touchscreen built into the side stand - with manual backgauge, adjustable from behind - Electronic components are quality components from SCHNEIDER - electrical cabinet is integrated in the side stand - Adjustment of the hydraulic pressure to the material thickness - Adjustment of the material thickness on the bending beam is easy with a mm scale - Handle for adjusting the material thickness on the upper beam is hidden in the side stand - Segmented upper cheek The dat ...

: 4 St. : 2 St. Plate thickness: 45 mm table length: 2000 mm range L-W-H: 2000 x 700 x 900 mm weight: 152 ca. kg. Furnishing: - brand new workbench - Multiplex worktop 45 mm with surrounding edge - left: 3x drawers - right: 1x drawer, 1x door in COLOR: BLUE / GREEN OR GRAY available! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2100 mm plate thickness: 6,0 mm ST 42 thickness at Niro-steel: 4,0 mm VA cutting angle: 1,2 Grad no. of strokes: 28 Hub/min oil volume: 150 ltr. down holder: 11 Stück control: CYBELEC CybTouch engine output: 11,0 kW back stop - adjustable: 1.000 mm table height: 800 mm weight: 4.500 kg range L-W-H: 3.010 x 2.100 x 1.640 mm ------------------------------------------------- electr. / hydraulic CNC swing cut shears with CYBELEC CNC touch screen control with electr. / hydr. Kerf adjustment ------------------------------------------------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Quantity Cutting length limitation Material preselection, including sheet thickness Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) on ball screws ...

sheet width: 2050 mm plate thickness: 10.0 mm ST pre-bending: 8.0 mm ST diameter of upper rolls: ~ 205 mm side roll diameter: ~ 195 mm Control: konv. oil volume: 80.0 Liter voltage: 380 V total power requirement: 5.5 kW weight: 3200 kg range L-W-H: 4500 x 1500 x 1300 mm Features: - Robust electro-hydraulic 3-roll bending machine - 3-roll concept offers a wide range of bending and rounding options - Pivoting control unit at the front Operation - Control of all rolls and machine axes Digital position display Manual operation via joysticks - Diameters of up to 1.1 times the top roll diameter are possible - Forged and hardened rolls with a hardness of 53-55 HRC - Low-maintenance, stable machine design - Sturdy welded steel construction - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge / pressure indicator for the rolls - Safety device (safety lanyard with switch u ...

plate thickness: 6.5 mm thickness at Niro-steel: 5.0 mm angle adjustable from - to: 30 - 140 Grad no. of strokes: ca. 50 Hub/min table:: 950 x 1030 mm blade length: 220 x 220 mm total power requirement: 4.0 kW weight: 800 kg range L-W-H: 1100 x 950 x 1280 mm current new price approx. 25.000 euros good condition () special price on request Equipment: - electro-hydraulic notching machine - multi-function machine with 2x work stations 1x notching, 1x unit for radius rounding including radius punching tools - manual angle adjustment 30 - 140 degrees 2x handwheels for angle adjustment - large / stable work table - 2x new angle stop, adjustable - automatic cutting gap adjustment - 1x freely movable foot switch - connection cable + 16A plug - cutting performance: 6.5 mm to 60° ST 5.0 mm to 60° VA 4.0 mm to 30° ST 3.0 mm to 30° VA The data for this ad was created with ModulMWS -  ...

plate thickness: 6.0 mm ST thickness at Niro-steel: 4.0 mm plate thickness: 8.0 mm ALU angle adjustable from - to: 30 - 140 Grad table:: 950 x 890 mm blade length: 220 x 220 mm stroke: 35 H/min work height max.: 1150 mm total power requirement: 3.0 kW weight: 800 kg range L-W-H: 1200 x 1200 x 1400 mm New price approx. 20.000 euros Special price on request - in checked condition - machine video - https://www.youtube.com/watch?v=QmUbaV41BfA Equipment: - electro-hydraulic notching machine with adjustable angle 30° – 140° - cutting capacity up to 6.0 mm sheet thickness (R42/mm2) - made of the special spheroidal cast iron GS500. - the cutting movement takes place from top to bottom - robust work table made of steel with conical grooves which ensure optimal adhesion of the stop angles - the scales are embossed - automatic cutting gap adjustment (patented) - system for the automatic adj ...

plate thickness: 4.0 mm ST plate thickness: 3.0 mm VA table-size: 1200 x 780 mm blade length: 200 x 200 mm strokes per minute: ca. 60 min angle adjustable from - to: 15 - 150 Grad engine output: 4.0 kW weight of the machine ca.: 1200 kg dimensions of the machine ca.: 1700 x 1000 x 1500 mm Furnishing: - electro-hydraulic notching machine, with angle adjustment 15° - 150° Angle adjustment by hand wheels - front panel - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface to avoid tilting or slipping of the metal sheet - 2x staking stops with movable and interchangeable stop bars - lateral clippings ejection - free-moving footswitch - Operation manual Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9397092 The data for this ad was created with ModulMWS - the software solution of  ...

plate thickness: 4.0 mm ST plate thickness: 3.0 mm VA table-size: 1200 x 780 mm blade length: 200 x 200 mm strokes per minute: ca. 60 min angle adjustable from - to: 15 - 150 Grad engine output: 4.0 kW weight of the machine ca.: 1200 kg dimensions of the machine ca.: 1700 x 1000 x 1500 mm Furnishing: - electro-hydraulic notching machine, with angle adjustment 15° - 150° Angle adjustment by hand wheels - front panel - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface to avoid tilting or slipping of the metal sheet - 2x staking stops with movable and interchangeable stop bars - lateral clippings ejection - free-moving footswitch - Operation manual Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9397088 The data for this ad was created with ModulMWS - the software solution of  ...

plate thickness: 8.0 mm ST plate thickness: 5.0 mm VA table-size: 1000 x 950 mm blade length: 200 x 200 mm strokes per minute: 60 H/min adjustable: Winkel 30°-140° mm work height max.: ca. 950 mm oil volume: 60.0 l engine output: 4.0 kW weight of the machine ca.: 1200 kg range L-W-H: 1000 x 1120 x 1700 mm from a maintenance workshop New price at the time ~ 21.000 euros Furnishing: - Robust electro-hydraulic notching machine - with adjustable angle, electro-hydraulic adjustment - Adjustment by hand wheels (left + right knife segment) - hardened knives also for cutting stainless steel - front panel - electro-hydraulic knife clamping - Inching mode for setting the shear blades selectable (manual mode) - planed table surface, with T-slots to avoid tilting or slipping of the metal sheet - 2x staking stops with movable and interchangeable stop bars - 2x blank holders - 1x free moving foo ...

plate thickness: 4.0 mm ST plate thickness: 3.0 mm VA table-size: 1200 x 780 mm blade length: 200 x 200 mm strokes per minute: ca. 60 min angle adjustable from - to: 15 - 150 Grad engine output: 4.0 kW weight of the machine ca.: 1200 kg dimensions of the machine ca.: 1700 x 1000 x 1500 mm Furnishing: - electro-hydraulic notching machine, with angle adjustment 15° - 150° Angle adjustment by hand wheels - front panel - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface to avoid tilting or slipping of the metal sheet - 2x staking stops with movable and interchangeable stop bars - lateral clippings ejection - free-moving footswitch - Operation manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 4.0 mm thickness at Niro-steel: 3.0 mm blade length: 200 mm angle adjustable from - to: 30 - 120 Grad no. of strokes: 60 Hub/min oil volume: 60.0 ltr. table:: 1000 x 800 mm total power requirement: 2.62 kW weight: 800 kg range L-W-H: 1000 x 1500 x 1440 mm Furnishing: - robust hydraulic notching machine, with adjustable angle - Adjustment range 30 - 120 degrees Adjustment with the 2x front handwheels - hydraulic clamping and locking - Infinitely adjustable cutting depth, with digital display - 2x locking accuracy stop, with stop bars - Stripper for sheet metal cutting - Collecting container for clippings - Freely movable foot pedal for triggering the stroke The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

volume capacity: 1600 m3/h feed volume: 99,9 % length: 3.000 Absaugschlauch mm motor: 230 Volt motor: 1,1 KW weight: 80,0 kg range L-W-H: 580 x 580 x 900 mm Description: The filtoo filter device newly developed by TEKA is a mobile filter system that many Tasks in the field of filtration of Smoking, dusts and gases can be used. Also suitable for high-alloy steels (stainless steel). (the device was based on DIN EN ISO 15012-1 (2005) tested and is IFA (formerly BGIA) certified (IFA No. 201020469/1140) for welding smoke class W3 (degree of separation:> 99.9%)) Where can the SIG 230 filtoo be used? - at welding workplaces - in the workshop area - for soldering applications - with restorers - in locksmiths Furnishing: - BGIA - certified suction and filter system IFA 1005030 for suction to hochleg. Steels & non-ferrous metals - Operating instructions in German optional equipment for a surchar ...

pressure: 220 t chamfer lenght: 4100 mm distance between columns: 3600 mm column arm: 410 mm ram stroke speed: 180 mm/sec work speed: 10.0 mm/sec return speed: 160 mm/sec work stroke: 275 mm dayligth: 550 mm table height: 900 mm table width: 160 mm oil volume: 300 ltr. voltage: 400 Volt total power requirement: 18.5 kW weight: 13800 kg range L-W-H: 5150 x 2250 x 3000 mm -------------------------------------------------- Press brake with special equipment increased installation height increased cylinder stroke as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA-58T graphics / touchscreen 2D graphic programming 15 high definition color TFT screen Bending sequence calculation Product programming and display in real size USB interface - Motorized backgauge with R-axis, on recirculating ball spindles - X ...