jenbacher type 2 used for sale

geared motor, electric motor -Speed: 2.5 rpm -Power: 0.11 kW -Design: B5 -Shaft diameter: Ø 25 mm -Brake: 24 V -Protection class: IP 65 -Number: 2x geared motors available Price: per piece -Weight: 22 kg

2012 Envair CDC F 2G2D & 2012 REUKO Isolator and cleanroom Last filter change and last maintenance were on 09.01.2014 (see test report in the appendix) The air handling unit is designed for a room size of approx. 12 m2 (file room 3.46 in the appendix). The isolator has the complete documentation incl. test reports. It has been used very little (see current operating hours below) and is connected to an air handling unit (designed for approx. 12 m2). These are the technical parameters: REUKO climate service ENVAIR Isolator (Cytostatic isolator (CMR) 1.2m) a. Manufacturer: Envair Deutschland GmbH b. Type: CDC F 2G2D (2-Hand, Isolator clean room class A) c. Build: 06. 2012 d. Use: Reconstitution during 2 clinical trials (including cytostatics); idle operation for several months e. Details: isokinetic measuring probe, For the processing of: - Cytostatics - antivirals -hazardo ...

Drive: . kW Capacity: . kg/h material: . 6 pieces Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us: More than 400 of our own machines in the warehouse More than 12,000 m² of storage space, crane capacity 70t. More than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centrifugal pump, water pump -Motor power: 3 kW -Speed: 2950 rpm -Weight: 100 kg

Bending tool, die, upper blade, upper tool, straightening tool -Tool: for press brake -Tool radius: 7.5 mm -Dimensions: 45 x 190 mm -Length: 2800 mm -Weight: 240 kg

Interchangeable jaws, top jaws, three-jaw chucks -for: Power chucks -1 sentence: hard cheeks -4 sentence: soft cheeks -Hole spacing: 44 mm -With: chamfered groove and pointed teeth Price: complete -Weight: 50 kg

Side channel blower, side channel blower, ring blower, vacuum pump -Drive: 1.1 kW -Speed: 2880 rpm -Connection: 1 1/2 inch -Dimensions: 420/280/H340 mm -Weight: 20 kg

Screening system The parts list of the screening system. The system was initially operated with a generator and now has a permanent power connection. - Vibratory conveyor trough with double balancing drive - Single deck vibrating screen SEWU 2400x5000 - Industrial trailer with all-wheel steering and swing axles, mechanical support feet, payload 47 tons - Steinert overband magnetic separator UMP 90 180 W - Trough conveyor belt, center distance 13 m, belt width 2 m - MTS conveyor belt scale in the fine grain belt - Draabe Luftfeuchtungsystem MyFog Find more here - / Contact us at -

Wedge bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 200 mm -Interchangeable jaws -Cone: 69 mm -Thread: M 95 x 4.5 mm -Weight: 26 kg

- SFE. Superfast 2x18L CO2 Extraction System manufactured by Thar Process. The supercritical fluid extraction system is designed to extract oil, oleoresins, and other ingredients which become soluble in supercritical CO2 at high pressure and temperature. SFC. Isolator SFC 20 CO2 Purification System manufactured by Thar Process. Purification SFC is a normal-phase chromatographic technique that uses CO2 as the main mobile phase. Find more here - / Contact us at -

Cutter head, milling chuck, carbide cutter, indexable insert cutter -Diameter: 200 mm -Number of teeth: 12 -Indexable inserts: Carbide -Recording: SK50 -Weight: 18 kg

Boring head, spindle head, drill head, plunge drill head, plunge head, spindle drill head, boring head, spindle tool -Quantity: 2x spindle tools -Recording: SK50 -Spindle dimensions: 145-230/225-310 mm Price: complete -Weight: 14 kg/piece

Description: Eagle Systems CFM 106-20K Eco-Eagle Foil Module Consisting of: 1. Bi-directional differential shaft (x2) 2. Automatic pneumatic connection 3. SS Dual hardened helical gears both shafts 4. Quick release rubber module spreader rollers 5. Lower in-feed roller assembly for proper foil path 6. Heavy duty linear thrust bearings 7. Precise air transducers 8. Air pressure control sensor 9. PID closed loop air system control 10. Eco-Power” Minimal power servo motor control 11. Closed loop sensors for foil speed control 12. Fail safe closed loop sensors for multi foil roll control 13. Foil position encoder 14. Fail safe wiring system 15. Solid state relays 16. Mode indication by lights 17. Fully automatic control 18. Fail safe press guarding 19. Full Module guarding 20. Foil shaft lifting beam 21. All electrical and pneumatic controls contained within the modu ...

Roller conveyor, conveyor belt, roller track -Roller width: 400 mm -Conveyor length: 2000 mm -Roller diameter: 50 mm -Central spacing: 100 mm -Height: 300 mm -driven: via flat belt -without: flat belts -Dimensions: 2000/520/H300 mm -Weight: 90 kg

1999 WEBER LC 2000 DDP-600 Working width max. 600 mm Workpiece thickness max. 150 mm automatic measurement of the workpiece thickness Feed continuously adjustable 2 - 12 m/min. Aggregate equipment: 1) Contact roller unit with smooth steel roller Drive motor 15 KW, pole-changing for 2 grinding speeds 2) Rubber contact roller assembly with corrugated rubber roller Hardness 60 Shore drive motor 15 KW, pole-changing, this one The motor also drives the subsequent sanding shoe unit 3) Sanding shoe unit pneumatically controlled Machine complete with small parts return, designed as a transport curve, as a plate conveyor transport Machine weight approx. 1,800 kg Connection values: 400 V, 50 Hz, 3 Ph. Find more here - / Contact us at -

Bending tool, die, lower knife, lower tool, prism tool -Tool: for press brake -Prisms: 90° 12 mm -Prisms: 90° 10 mm -Tool: shared -Tool dimensions: 30 x 90 mm -Tool total length: 2500 mm -Rail length: 2500 mm -Weight: 95 kg

2626 OMAX JetMachining Center Water jet system The machine has been completely overhauled and has very few operating hours. Machine type 2626. Size LxWxH 106х77х96. INNOMAX desludging system, OMAX EnduroMAX pump P5060 and INNOMAX abrasive conveying system also included. High-precision premium waterjet cutting The first-class OMAX JetMachining® Centre was developed for advanced systems, where performance and results are paramount. The OMAX JetMachining Centre is a true hard worker for production in any manufacturing environment and delivers: - Manufacturing high-precision multi-axis parts quickly and consistently with OMAX IntelliMAX® software - Improved efficiency with EnduroMAX® pumps that deliver the highest nozzle performance - Reduced maintenance with durable and hardwearing materials - Increased uptime through improved IntelliVISOR® system monitoring - Better end ...

Number of motors: 1 Stück : 450-2400 mm Control: manuell The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bending tool, die, lower knife, lower tool, prism tool -Tool: for press brake -Prisms: 90° 12 mm -Prisms: 90° 10 mm -Tool: not shared -Tool dimensions: 30 x 90 mm -Tool total length: 2000 mm -Rail length: 2500 mm -Weight: 83 kg

Bending tool, die, lower knife, lower tool, prism tool -Tool: for press brake -Prisms: 90° 10 mm -Prisms: 90° 10 mm -Tool: shared -Tool dimensions: 32 x 90 mm -Tool total length: 2430 mm -Transport dimensions: 820/90/H96 mm -Weight: 80 kg

2016 ONLINK Technologies SIGMET-2000V High vacuum coating machine The system coats even the most complex 3D molded parts made of metal, glass or plastic with aluminum and achieves exact, precise quality and flexibility. Total machine operating hours: 700 hours. Characteristics: - Double door arrangement for high productivity - Precise drive system - Planetary drive for even coating - Vertical arrangement of the substrate holders - Modular and very flexible structure - Annealing pretreatment by alternating or direct current - Annealing pre-treatment by MF (40 kHz) - Recipe management and process visualization - Base coat - PECVD process - Top Coat (protective layer) - PECVD process - Highly effective and fast vacuum system - Remote maintenance Typical applications: - Automobile – inside and out - Cosmetics - Household and furniture - Glass and bottles - Decorative  ...

Hand lever scissors, hand tin snips, tin snips, sheet metal snips -Scissors: 240 x 4 mm -Handover in its current condition as inspected -Dimensions: 400/150/H1200 mm -Weight: 46 kg

2019 Šmeral/ Pressmont LKT 250 D Crank draw press Type: LKT 250 D Manufacturer: Šmeral/ Pressmont Overhaul: 2019 Nominal force 2500 kN Working path 12.5 mm Ram stroke 250 mm Number of strokes 20 min-1 Usable number of strokes 12 min-1 Shut high 750 mm Adjustment of ram 100 mm Passage under guidance 1600 mm Ram working surface 1380 x 850 mm Table working surface 1575 x 1150 mm Table top thickness 130 mm Power of the main electric motor 30 kW The speed of the main electric motor is 1445 rpm The power of the electric motor for adjustment is 2.2 kW Speed ​​of the electric adjustment motor 1440 rpm Press width 2980 mm Press depth 1500 mm Press height 4615 mm Weight 27,000 kg Included feeder, straightener and decoiler Press in very good condition, under power. Find more here - / Contact us at -

Machine vice, sturdy vice, drill press vice -Vise: rotatable -Jaw width: 200 mm -Clamping depth: max. 245 mm -Dimensions: 550/370/H195 mm -Weight: 80 kg

2001 Kasto KASTOFUNCTIONAL A Kastofunctional type 6420 (year 2001) GHA SCH Cutting range max. 260 mm Mitre angle +/- 45° Drive power 1.5 kW 2000 Kasto SSB 260 VA-CC Kasto automatic band saw SSB 260 VA (year 2000) GGA Cutting range max. 260 mm - Automatic material feed - Infeed and outfeed - roller conveyors Drive power 4 kW

max. wheel diameter: 150 mm gear width: mm max. module: 4 min. module: control: Sinumerik 840 D table diameter: 140 mm maximum axial offset: 200 mm milling tool taper: ISO 40 diameter of hob: max. 130 mm cutter length max.: 220 mm milling spindle speeds (infinitely variable): 300 - 1200 U/min shifting: max. 170 mm milling head -swivable +/-: 45 ° feed speeds: 1 - 1500 mm/min rapid travel speed: 3000 m/min workpiece magazin: Stück max. workpiece diameter: im Magazin: 150 mm total power requirement: 50 kW weight of the machine ca.: 8,5 t dimensions of the machine ca.: 4,7 x 3,6 x 2,6 m Condition: ready for operation: Video(s) available on our website.: Electric 400 Volt: Used gear hobbing machine, Pfauter, completely overhauled in 2023 by the specialist company SerWeMa. There is another identical machine available, but the spindle needs to be overhauled. If you are interested, you ca ...

Mitutoyo QUICK VISION ACTIVE 202 Optical measuring machine (Vision Measuring Machine) from the manufacturer Mitutoyo Specifications (See pictures) High efficiency No constant supervision is required. The operator can carry out other tasks. Minimisation of error sources Automatic edge detection The automatic edge detection function enables high reproducibility of measurements, regardless of the reproducibility of measurements. Image autofocus The image autofocus function enables reliable height measurements at high speed. Continuous measurement of multiple workpieces Grinding function With this function, a large number of workpieces positioned on the large number of workpieces positioned on the device are on the device in a single operation. Automatic measurement can be started after be started after rough positioning Pattern search The pattern search function automat ...

The Stanzvorrichtung TrimStar 250kN is a high-performance stamping machine designed for precision and efficiency in manufacturing processes. This machine is tailored for heavy-duty applications, particularly in the automotive industry. Hydraulic Pressure: - Max Pressure: 180 bar - Operating Pressure: 150 bar Power: 25 kW Operating Frequency: 50 Hz Connection Voltage: 3 x 400 V Full Hydraulic System Installation Dimensions (L x W x H): 4700 mm x 2790 mm x 4850 mm Weight: 18,000 kg Find more here - / Contact us at -

Servo motor, electric motor, DC motor -Speed: 67 rpm -Power: 8.9 Nm -Voltage: 24 V DC -Design: B5 -Shaft diameter: Ø 10 mm -Dimensions: 170/67/H67 mm -Weight: 1.2 kg

Turning tool with indexable cutting jaws, clamping holder, turning tool, indexable insert holder, turning tool, indexable insert tool -Dimensions: 150/25/H25 mm -Weight: 1 kg

Turning tool with indexable cutting jaws, clamping holder, turning tool, indexable insert holder, turning tool, indexable insert tool -Turning tool inclination: 107.5° -Dimensions: 150/30/H25 mm -Weight: 0.7 kg

CNC milling machine Type: UBF 2500/10 Manufacturer: Kekeisen Year: 1997 Control: Heidenhain TNC 426 X: 2500 mm Y: 1200 mm Z: 1000 mm Spindle speed: 2000 rpm Spindle taper: SK 50 Table: 1200 x 1000 mm Max workpiece weight: 7000 kg Machine dimensions: length: 8300 mm width: 4000 mm height: 3250 mm weight: 17000 kg Two boxes with tools In good condition, under power. Find more here - / Contact us at -

Hackeranlage hacker Rudnick Enners 500 200 motor 45kw 500mm 200mm vibrorynne detecktor metau scratch conveyor technology

Turning tool with indexable cutting jaws, clamping holder, turning tool, indexable insert holder, turning tool, indexable insert tool -Dimensions: 125/20/H35 mm -Weight: 1 kg

Windsor Klöckner W2700 - 27780 Injection Molding System Wittmann handling system included Injection Volume: - Strock volume: 20300 cm³ Clamping Force: - Schließkraft: 2700 kN Injection Pressure: - Einspritzdruck: 1360 bar Main Connection: - Network 1: - Voltage: 500 Volt - Frequency: 50 Hz - Total Power: 418 kW Cooling Water: - Volume: Not specified - Max Temperature: 32°C Weight: - Total Weight: Not specified Find more here - / Contact us at -

Two-jaw chuck, 2-jaw chuck, vise, faceplate -exciting: centric -Mouth size: Ø 200 mm -Weight: 19 kg

Micrometer screws -Measuring range: 225-250 mm -One rotation of the drum corresponds to: 0.5 mm -with locking device -Measuring force: Ratchet -Hand protection -Quantity: other sizes also available -Weight: 2.5 kg

Lamellar aprons, samurai aprons, machine covers, machine protection, protective cover, bellows, protective cover system, protection system, guide guard, guide cover -Dimensions: 630/205/H5 mm -Weight: 3.5 kg

Geared motor, electric motor, electric geared motor -Speed: 15 rpm -Power: 0.55 kW -Design: Angle gear -Shaft diameter: 25 mm -Protection class: IP 54 -Weight: 28 kg

CTK 2200 Kaschieranlage: - Type: CTK 2200 - Nominal Width: 2,200 mm - Product Width: 2,200 mm - Working Height: 1,220 mm ± 50 mm - Processing Side: One-sided from above - Control Side: Right - Fixed Edge of Machine: Right - Machine Speed: 10 – 30 m/min - Max Production Speed: 25 m/min - Passage Height: 80 mm - Dimensions: - Total Width: 3,000 mm - Installation Length: 11,000 mm - Working Width: Max 2,150 mm - Height: 5,700 mm - Weight: Approximately 9,500 kg - Load Capacity: 80 kg - Maximum Cycle Speed: 10 cycles/min - Power Supply: 400 V / 50 Hz, 3 phases, and control voltage 230 V / 50 Hz + 24 V/DC​ In the event that the buyer wishes to laminate the panels on both sides, we can also offer a suitable stacking turner. Seen on the last picutre Find more here - / Contact us at -

geared motor, electric motor -Speed: 62 rpm -Power: 0.55 kW -Design: B3 -Shaft diameter: Ø 30 mm -Brake -Weight: 35 kg

Manufacturer: ALPA Model : RT 2100 Type of machine : surface grinding machine Year of manufacture : 1997 - Max workpiece width: 600 mm - Max workpiece length: 2100 mm - Magnetic table: 2000 x 400 mm Equipped with: - Wheel dresser - Electronic control unit Mod. MT 2000/R - Electrospindle for conical grinding - Electronic plate from Tecnomagnete - Coolant tank Find more here - / Contact us at -

Dematic conveyor system Accumulating roller 22000-500-440 RA2342 The roller conveyor shown does not correspond exactly to the illustration in the advertisement, but is the same model and is in the same condition. Only the dimensions differ. Further information Manufacturer: Dematic Type: Accumulating roller conveyor Year of construction: unknown Conveyor length (FL): 22000 mm Condition: good (used) Roller width (RB): 440 mm Nominal/outer width (NB): 500 mm Accumulation slot size: 700 mm Storage slot control: Plug and Play, electro-pneumatic Roller pitch: 125 mm Drive types: SEW Eurodrive head drive Conveying speed: approx. 0.5 m/s Optionally available e.g: Frequency inverter for stepless speed control Supports Side guides Price: net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: condition: good (used) scope of delivery: without supports and side guid ...

Machine Type: Center Grinding Machine Manufacturer: Henninger Model: ZS 200 Year: Not specified - Max Workpiece Length: up to 2000 mm - Workpiece Diameter: 285 - 325 mm - Center Diameter: 2 - 110 mm - Bore Taper: 50 - 120 mm - Center Height: 165 mm - Wheel Diameter: 10 - 60 mm - Grinding Wheel Speed: 9150 - 18300 RPM - Power: 0.4 kW - Weight: 0.5 tons Equipped with: - Pneumatic centering device

Technician vice PANAVISE Jaw width 63 mm Wingspan approx. 60 mm Machine Base - Vacuum Plate swivel 90° Rotatable 360° Weight approx. 1 kg

3-axis CNC lathe Type: Puma GT 2600 LM Manufacturer: Doosan Year: 2022 Control: Fanuc i-Series Hours: 270 Turning diameter over bed: 630 mm Turning diameter over support:460 mm Max turning length: 1030 mm Spindle bore: 81 mm Max work weight without/with tailstock: 260/520 kg Spindle speed: 3500 rpm Automatic turret: 12 positions Driven tools speed: 5000 rpm X: 265 mm Z: 1100 mm C: +-360• Chip conveyor Tool probe Machine weight: 4950 kg Machine in very good condition, under power. Find more here - / Contact us at -

Offer 25020 Specifications: - Compressive force 200 t - Projection 400 mm - Table size approx. 1000 x 750 mm - Diarrhea hole in the table approx. 320 x 220 mm - Pushrod area 940 x 400 mm - Plunger adjustability 100 mm - Stroke adjustment 20 - 130 mm - Drive 380 V / 10 kW - Space requirement approx. W 1400 x H 2980 x D 2900 mm - Weight approx. 13000 kg

Pallet racking, heavy-duty racking, high-bay racking, boltless racking, warehouse racking uprights -Depth: 500 mm -Height: 2000 mm -Number: 4x stands -Price: complete -without: crossbeams -Weight: 50 kg

Pallet racking, heavy-duty racking, high-bay racking, boltless racking, warehouse racking uprights -Depth: 500 mm -Height: 2500 mm -Quantity: 3x stands -Price: complete -Stands only, no crossbars -Weight: 50 kg

Pallet racking, heavy-duty racking, high-bay racking, boltless racking, warehouse racking uprights -Form 1: Quantity: 4x Depth 750 mm Height 2100 mm -Form 2: Quantity: 2x Depth 600 mm Height 2100 mm -Price: complete -Scope of delivery: without crossbeams -Total weight: 60 kg