jenbacher gas generator used for sale

CHP with generator Stamford, electrical output 190 kWel., customer property, variant as building integration, without exhaust gas heat exchanger

Machine type MIG/MAG welding system MerkLE brand Type M 210 K Connection voltage 230/400 volts Setting range 25 – 210 amps Duty cycle 15 % ED at 210 Ampere 60% ED at 80 amps Current adjustment infinitely variable Cooling transformer by built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed gearbox 4-roller drive DV 25 Fuse 16 amps Dimensions L x W x H 855 x 390 x 585 mm Weight 75 kg Special accessories point and interval device Adapter for 230/400 V Age approx. 25 years Condition workshop tested, good incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch SBT 157 G, 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll welding wire D 300, 5 kg 1 piece hand shield 1 piece attachment glass 90 x 110 mm white  ...

Machine type MIG/MAG welding system Eurotronic brand Type MAG 3000 EC Connection voltage 3 x 400 Volt Setting range 30 – 300 amps Duty cycle 35 % ED at 300 Ampere 60% ED at 230 amps 100% ED at 190 amps Current setting 12 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed 4-roller drive Fuse 16 amps Dimensions L x W x H 860 x 490 x 650 mm Weight 78 kg Age approx. 5 years Condition workshop tested, very good, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer argon with 2 pressure gauges 1 roll of welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece spare parts box, kpl. Equipped 1 pair of welding gloves 1 piece instruction manual  ...

Key data: 220 °C, 2000 mm

PULVERBESCHICHTUNGSOFEN Verwendungszweck : Pulverbeschichtung Maximale Temperatur : 220ºC NUTZBARE INNENABMESSUNGEN Länge : 2.500mm Breite : 1.200mm Höhe : 1.800mm Material der Außenfläche : 1mm Kohlenstoffstahlblech, außen pulverbeschichtet Material der Innenfläche : 1mm verzinktes Stahlblech, nicht beschichtet Dicke der Isolierung : 150 mm Isolierung : Boden - 50 mm Steinwolle (50 kg/m³) Seiten- und Deckplatten - 150 mm Steinwolle (50 kg/m³) Wärmeübertragung : Konvektion, durch geschlossenen Luftkreislauf Heizungsart : Indirekte Heizung mit Wärmetauscher Temperaturregelung : Ein/Aus, 0-400ºC Digitaler Thermostat, Fe-Const (J-Typ) Thermokupplung Umgebungstemperatur : +10ºC (während des Betriebs) Gleichmäßigkeit des Ofens: ±2,5ºC (5ºC insgesamt) Regelgenauigkeit: ±1ºC Aufheizzeit : 25-30 min (leerer Ofen) Energiebedarf des Ofens : 30.000 kc ...

Machine type TIG inverter welding system gas-cooled DC and AC system Merkle brand Type LiteTIG 190 AC/DC Connection voltage 1 x 230 Volt Setting range 5 – 190 amps Duty cycle 25 % ED at 190 Ampere 60% ED at 140 amps 100% ED at 115 amps Current adjustment infinitely variable weldable material thickness 5 mm Cooling inverter by built-in fan Cooling burner gas-cooled Version portable mounting system Fuse 16 amps Dimensions L x W x H 410 x 150 x 240 mm Weight 7.4 kg Age 6 months Condition workshop tested, as new, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece TIG burner 4 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box kpl. Equipped 24 months warranty 1 piece instruction manual List factory price ex ...

Machine type MIG/MAG welding system equipped for steel wire in 1.0 mm Rehm brand Type RD 250 Connection voltage 3 x 400 Volt Setting range 35 – 250 amps Duty cycle 40 % ED at 250 Ampere 60% ED at 210 amps 100% ED at 170 amps Current setting 10 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed gearbox 4-roller drive Fuse 16 amps Dimensions L x W x H 900 x 465 x 855 mm Weight 81 kg Age approx. 15 years Condition workshop tested, good incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch, 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll welding wire D 300, 5 kg 1 piece hand shield 1 piece attachment glass 90 x 110 mm white 1 piece of protective glass 90 x 11 ...

MWM TCG 2020 V 12 (ready to install) MN: 2204405 Circumference: - Crankcase incl. new bearing - Crankshaft (Std-Maß) incl. new bearing - Camshaft (12301190 / 12301191) incl. new bearing - Wheel operation incl. wheel box lid - Flywheel housing - Oil pump with oil suction pipe - Oil pan - Pestle (12453142) - Oil pressure valve On request, the scope can be extended (e.g. pistons, liners, cylinder heads, etc.) The offered part motor can also be used as TBG 620. The engine is not sold as a replacement engine. Measurement protocols are included. Please contact us for a written quote.

For sale a Dresser and Wayne CNG natural gas tap in good condition.

For sale a GreenField CNG natural gas tap in good condition.

Available in stock 2 x Used RMG Solenoid Gas Valves DN65 PN16, model 01-EVA 25 NH-4. We also have other elements of the gas train available, namely: 1 x Ball Valve DN65 PN16 with pressure switch 1 x Gas Filter DN65 PN16 1 x Gas Pressure Regulator DN65 PN16 The equipment is used but in good working conditions. VDC: 24 Power: 70 W Maximum Inlet Pressure: 0.1 bar Environment Temperature: -20ºC to +60ºC

Available in stock 1 x Used Bryan Donkin RMG Gas Pressure Regulator RMG-BD226 (FIG 226 ZSO-ECL). Designed primarily for control of fuel feeds to industrial and commercial burners, heater units, boilers and other items of equipment where an accurate, safe and reliable controlled pressure is required. We also have other elements of the gas train available, namely: 1 x Ball Valve DN65 PN16 with pressure switch 2 x Solenoid Valves DN65 PN16 1 x Gas Filter DN65 PN16 The equipment is used but in good working conditions. Outlet Pressure Range: -3 mbar to 3 mbar Maximum Inlet Pressure: 0.1 bar DN 65 PN 16

Available in stock 1 x Used Madas Gas Filter DN100 PN16. We also have other elements of the gas train available, namely: 1 x Ball Valve DN65 PN16 with pressure switch 2 x Solenoid Valves DN65 PN16 1 x Gas Pressure Regulator DN65 PN16 The equipment is used but in good working conditions. Environment Temperature: -15ºC to +70ºC Maximum Working Pressure: 2 bar

Available in stock 1 x Used AVK Flanged Gate Valve DN150 PN16. The equipment is used but in good working conditions. Temperature Range: -20ºc to +60ºC

Available in stock 1 x Used Bohmer Kugerlhahne Gas Ball Valve type FSK V 016.065 with Filter and Dungs Differential Pressure Switch GW 50 A4. We also have other elements of the gas train available, namely: 1 x Gas Pressure Regulator DN65 PN16 2 x Solenoid Gas Valves DN65 PN16 1 x Gas Filter DN65 PN16 The equipment is used but in good working conditions. Pressure Switch Maximum Operating Pressure: 500 mBar DN 65 PN 16

Available in stock 3 x Used Capstone Gas Pressure Regulator. Most commonly used for Microturbines C60. The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request. Max Inlet: 250 PSI

Available in stock 4 x Used Capstone Gas Fuel Manifolds. Most commonly used for Microturbines C30. All of the manifolds are complete with premix solenoid (P/N 507033-001). The units are used but are in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Available in stock 6 x Used Capstone Gas Fuel Injector. Most commonly used for Microturbines C30. The units are used but are in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Available in stock 9 x Used Capstone Gas Fuel Injector. Most commonly used for Microturbines C60. The units are used but are in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Machine type MIG/MAG welding system Brand Rehm Type Magnum 182 Supply voltage 230/400 volts Setting range 30 – 180 amperes Duty cycle 25 % ED at 180 amps 60% ED at 140 amps 100% ED at 100 amps Current setting 6 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feeder 2-roller drive Fuse 16 Ampere Special device 2-stroke/4-stroke Points/Interval Dimensions L x W x H 760 x 320 x 580 mm Weight 53 kg Age approx. 20 years Condition workshop tested, very good, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch, 3 mtr. long 1 piece ground cable 1 piece pressure reducer argon with 2 pressure gauges 1 roll of welding wire D-300 coil, 5 kg, 8.0 mm Ø 1 can non-stick spray 1 piece hand shield 1 piece protect ...

EKU 750-6-1 6 burner gas stove 39 kW 6 burners 39 kW total power Stand-alone unit W 1200 x D 750 x H 850 mm open substructure More gas stoves in other sizes - new and used - can be found in our shop! International shipping costs on request!

EKU PXL 80M Lava stone grill EKU PXL 80M Lava stone grill Stand-alone unit Height-adjustable stainless steel V-grill grate W 800 x D 750 x H 850 mm 2 heating zones Piezo ignition Substructure open V-rust 17 kW Gas More lava stone crickets in other sizes - new and used - can be found in our shop! International shipping costs on request!

We have to sell Low voltage Engines for explosive gas atmospheres are with us on site, we offer transport at this price in Polish, abroad you have to call and ask about the cost. The engines are from 2018, but still originally packed was purchased as a spare part. More information about the engine is in the last picture. The price is for 1 piece, for the purchase of two we do an extra discount. Worth!

Arc welder CLOOS Type GLC 206 Fabr. No. 1150 Year of construction approx. 1984 Nominal power 200 Amp. Power 250 Amp. - 60% ED 200 Amp. - 100% ED Adjustment range 18 steps Mains connection 380 Volt, 50 Hz, 32 Amp. Plug- wire feed adjustment - external wire feeder CLOOS type CK 21 with 2 roller drive - equipped with 1.2 mm welding wire hose package 3 meters with central connection - current indicator - voltage display - air cooling with fan - pressure mannometer for gas cylinder Space requirement L x W x H 1200 x 460 x 960 mm Weight 160 kg; used

Arc welder CLOOS Type GLC 403 PA-TS Fabr. No. 8198 Year of construction 1994 Nominal power 400 Amp. Power 400 Amp. - 60% ED 310 Amp. - 100% ED setting range infinitely variable connection hose package 4.5 meters Mains connection 380 Volt, 50 Hz, 32 Amp. Plug 2 stroke and 4 stroke welding device - external wire feeder type CK 72/5TSZK with 2 roller drive and 4.5 meter hose package- 4 meter hose package with central connection and EHRIG hand torch type Senator-800-D - Water-cooled - Pressure mannometer for gas cylinder - Welding machine equipped with 1 mm welding wire Space requirement L x W x H 1250 x 600 x 1100 mm Weight 300 kg good condition; used

Arc welder EWM Type MIG 230 Fabr. No.: L/0340 Year of construction 1994 Power 230 Amp. = 35 % ED 120 Amp. = 100 % ED Setting range 8 steps Mains connection 400 Volt, 50 Hz, 16 Amp. Plug 2-stroke and 4-stroke welding device- Spot welding device - 2-roller wire feed - 3 meter hose package with central connection - Welding gas pressure reducer Space requirement L x W x H 1000 x 450 x 700 mm Weight 70 kg good condition; used

LPG forklift, gas forklift STILL type RX 70-16T Series No. 517314G00021 Year of construction 2016 Nominal load capacity 1600 kg Lifting height 4920 mm Fork length 1000 mm Fork carrier width 980 mm Construction height 2160 mm Total width 1100 mm Total length without forks 2200 mm Net weight 3040 kg - Triplex mast with full free stroke 1550 mm - hydraulic side shifter - LPG electric drive - 4-cylinder Volkswagen LPG engine with 30 kW - hydraulic auxiliary steering - front work light- reversing - warning light (blue) - rear hazard warning lights (yellow) - 4-wheel super elastic, solid rubber - front tires 18X7-8 SE / rear 18X7-8 SE - according to operating hours counter 22663 operating hours - New TÜV-UVV test good condition; used

- Gas mixing valve MWM 12301147 - Suitable for several motors - Please note! Price per piece! - 12301147 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating  ...

- Mixing pipe mixture line MWM 12301281 - References: 12300476 ; 12300650 - Suitable for several motors - Please note! Price per piece! - 12301281 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new proje ...

Complete 96 MWe gas fired black start/ peak load power station, consisting of 4 (four) GE Frame 5N Gas Turbine Sets 24 MW each. Each set consists of a: • Gasturbine • Generator • Diesel Engine • Main Gearbox • Auxiliary Gearbox • Speedtronic Mark II control system • Exhaust plenum • Air inlet filter house 125 MVA transformer With or without building. additional info on request.

BERGEN BRM GASKET KIT, CYLINDER HEAD MAINTENANCE KIT, O-RING KIT AVAILABLE IN OUR STOCK. BERGEN BRM, WARTSILA, DEUTZ KHD/MWM, MAN B&W, JENBACHER, ABC, PIELSTICK , GUASCOR, MAK, CATERPILLAR, VOLVO, WICHMANN, PUMPS, SACM, SEPERATOR, COMPRESSSOR, FILTER, PUMPS, VACUUM SAVAGE SYSTEM, HEAT EXCHANGER & COOLER. Spares are available and all kinds of spare parts can be given. Please contact us for your questions. EVE International AS E-Posta : info@eveinternational.com.tr Phone : +90 0216 519 2707 Fax : +90 0216 519 2720

Cutting length 8,000 Cutting width 2,500 Generator HYPERTHERM HPR 130 HD 130 Amp HYPERTHERM generator mod. HTR300XD SIEMENS numerical control Bevel head Oxyfuel cutting head

Sell a used natural gas / biomethane CHP 500kw, Year of construction 2016 Operating hours: 4500 engine: Liebherr G9512 Generator: Stamford HCI 634 Container: l. 12,20, b. 3,20m, h. 3,30m Control: Motortech Aprovis exhaust gas heat exchanger, GEA intercooler, supply & exhaust air backdrops... + EEG contract 2006 Biomethane very good condition

Arc welder Type: Euromag 35-2 Manufacturer Messer Griesheim

(1) Gas (2) Fuel (3) Electric: 2   Temperature maximum: 1050 C° Capacity (kg): 5000 kg Connection 3 x 250 Amp Power 200 KW Driven loading cart with 5000 Kg capacity Temperatur 50 - 1050 Gr Celsius Heater heatmasters 2 chanells with 12 elements (AF3.25 wire) Control HM-1000 Controller HM-Rigel Version 2.2b (T) Insulation ceramic wood / fibre 200 mm For Stress relieving, annealing, normalizing, heat treament Length:3650mm Width:2545mm Height:4500mm Weight:4400kg INDUSTRIAL FURNACES  ;Furnaces are used in many industries to produce a wide range of products under demanding requirements.  this extensive design and manufacturing capability in thermal processing equipment is the solution for your high temperature furnace requirements.  with wide assortment of furnaces, including Continuous, Batch, Car Bottom, Solution Heat Treat and Atmosphere. & ...

Arc welder Manufacturer: Oerlikon Type: Minicito

Machine type MIG/MAG inverter welding system Brand Mahe Type Eco MIG 300 Digital Supply voltage 3 x 400 volts Setting range 10 – 300 amperes Duty cycle 40 % ED at 300 amps 60% ED at 240 amps Current adjustment infinitely variable incl. wire automatic Cooling inverter by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feed gearbox 4-roller gearbox Fuse 16 Ampere Dimensions L x W x H 880 x 400 x 635 mm Special accessories wire switch without power for threading TIG DC, without RF Rod electrodes weldable Weight 34 kg Age as good as new Condition workshop tested, as new, incl. UVV workshop test report Scope of delivery welding system with the following accessories 1 piece welding torch 3 mtr. long 1 piece ground cable 4 mtr. long 1 piece pressure reducer argon with 2 pressure gauges 1 roll of weldin ...

Machine type MIG/MAG inverter welding system Brand Mahe Type Eco MIG 300 Analog Supply voltage 3 x 400 volts Setting range 10 – 300 amperes Duty cycle 30 % ED at 300 amps 60% ED at 240 amps Current setting 12 switching stages Cooling inverter by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feeder 4-roller drive Fuse 16 Ampere Dimensions L x W x H 880 x 400 x 635 mm Special accessories wire switch without power for threading Rod electrodes weldable Weight 34 kg Age as good as new Condition workshop tested, like new, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer argon with 2 pressure gauges 1 roll welding wire D-300 coil, 5 kg 1 can non-stick spray 1 piece spare parts box, k ...

Achievement: 280A at 40% 230A at 60% 175A at 100% Wire feed: 1 - 20 m/min. Equipped with: - Sweat pack - Massa cable - Gas valve - Automatic welding helmet -Operating instructions Machine LxWxH: 1000 x 565 x 900 mm Machine weight: 145 kg

Machine type MIG/MAG inverter welding system Make RILAND Type MIG 180PGDM Supply voltage 1 x 230 volts Adjustment range 15 – 180 amperes Duty cycle 20 % ED at 180 amps 60% ED at 110 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Portable assembly system version Wire feed gearbox 2-roller gearbox Fuse 16 Ampere Dimensions L x W x H 386 x 170 x 300 mm Special accessories TIG welding DC without HF E-welding Weight 8 kg Age 2 years As good as new Scope of delivery welding system with the following accessories: 1 piece welding torch MB 24, 2 mtr. Long 1 piece pressure reducer argon 1 piece ground cable 3 mtr. long, 16 sq m 1 piece electric welding cable 3 mtr. long, 16 sq m 1 piece of aluminum equipment 3 power nozzles aluminum, 1.0 mm Ø 3 pieces of current nozzles stee ...

The power plant, based on a 5 MW gas turbine CENTRAX 501 KB7 is complete with all needed equipment, allowing a steam output of 20 tons per hour at 20 bar. From ZERO hours until the last working day all maintenance was performed by Centrax under full maintenance contract.

offer 22686 Specifications: - Welding current 300 A 40% ED - 240 A 60% ED - 180 A 100% ED - Welding current adjustable 10 A - 300 A - Digital volt + ampere display - 4 roller wire feed infinitely adjustable - 2 stroke - 4 stroke - regulation - Eco Pulse Front Panel with various welding settings - water-cooled hose package approx. 4 running meters - Ground cable -Reducer - Water chiller unit - Connection 400 V / 32 A / 18 kVA - Space requirement approx. W 450 x H 1200 x D 1050 mm - Weight approx. 80 kg

HP Fuel gas Compressor RC10K -11/351 for power plant Wartsila

Turbogas Turbine GE5/1 5MW Natural gas for sale. Complete turbogas turbine plant with electric generator, recovery boiler and exchangers, dry cooler, diverter. Total Hours: 36,000 8,000 hours from the last overhaul. THERMAL POWER 9,0 MWt Saturated steam production 13,000 kg/h at 10BARg Voltage 11000 V Frequency 50 hZ Also available: - GE5/1 used turbine in nitrogen storage with 72,000 hours + 8,000 Hours after the last overhaul + one used generator. Price: €300,000 - NEW GE5 Turbine Spare Parts (value 1 million) Price: €400,000

welding current 60% ED: 270 A welding current 100% ED: 210 A electr. Connection: 380 V kW Space requirement: 1000 x 450 x 700 mm

Machine type MIG/MAG welding system Brand MERKLE Type M 3000 K Appendix No. 34.663 Supply voltage 3 x 400 volts Setting range 25 – 280 amperes Duty cycle 50 % ED at 280 amps 60% ED at 250 amps 100% ED at 200 amps Current setting 14 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feeder 2-roller drive DV 20 Fuse 16 Ampere Dimensions L x W x H 910 x 460 x 760 mm Weight 120 kg Age approx. 15 years Condition workshop-tested good incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch, 3 mtr. long 1 piece ground cable 4 mtr. long, 25 sq m 1 piece pressure reducer argon with 2 pressure gauges 1 roll welding wire D-300 coil, 5 kg 1 can non-stick spray 1 piece hand shield 1 piece protective glass 10 DIN  ...

Machine type MIG/MAG welding system Brand Merkle Type SpeedMIG touch 450 KW Appendix No. 120.420 Supply voltage 3 x 400 volts Adjustment range 20 – 450 Ampere Duty cycle 60 % ED at 450 amps 100% ED at 360 amps Current adjustment infinitely variable Cooling transformer by built-in fan Cooling burner water-cooled Design of mobile industrial plant Wire feeder 4-roller drive DV 26 Fuse 32 Ampere Special accessories touchpad DeepARC ColdMIG HighUP Dimensions L x W x H 1,050 x 450 x 890 mm Weight 180 kg Age 4 years Condition workshop tested, very good, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch, 3 mtr. long 1 piece ground cable 4 mtr. long, 70 qmm 1 piece pressure reducer argon with 2 pressure gauges 1 piece spare parts box, kpl. Equipped 1 pair of welding  ...

Motor from a CHP unit Operating hours approx. 50000 Subject to prior sale - errors possible

Max. operating temperature: 1600°C, including control cabinet, feeder and a defective glove box.

Circular cut diameter: 40-1000mm, max. cutting depth: 40mm, machine was scarcely used.

Nominal heating power: 80kW, length: 710mm, width: 1805mm, height: 1072mm.