jenbacher gas engine used for sale

: 0330 mm : 210 mm : 0635 mm : 167 mm : 40 mm : 2,2 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0390 mm : 240 mm : 1000 mm : 190 mm : 54 mm : 5,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 360 mm turning diameter over slide rest: 220 mm turning length: 1000 mm turning diameter in the gap: 380 mm turning speeds: 70 - 2000 U/min centre height: 180 mm spindle bore: 50 mm tailstock quill taper MT: 3 MK connected load frequency: 230 oder 400 V total power requirement: 1,8 kW weight of the machine ca.: 0.65 t dimensions of the machine ca.: 2,0 x 0,8 x 1,56 m Professional industrial machine 3-axis digital display 3-jaw chuck 180 mm. 4-jaw chuck 200 mm. Faceplate 280mm Bezel fixed Bezel rotating 4-fold steel holder. Halogen machine light Machine light Foot brake removable chip tray, chip protection wall Hardened and ground bed rails Complete coolant system Feed protection Machine tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tip height: 250 mm Center width: 2000 mm Circumferential Ø: over bed 500 mm Spindle bore: 50.8 mm Spindle holder: size 6 Pick-up cone tailstock: 5 MK Spindle speeds: 22 - 2000 rpm Feeds: longitudinal/flat 0.05-6.4/0.025-3.2 mm/rev Thread pitches: 80 - 1 mm Electrical connection: 380 V, 5.5 kW Space requirement: 3600 x 1100 x 1500 mm Weight: 1875 kg

Tip height: 205 mm Center width: 1500 mm Circumferential Ø: over bed 410 mm Spindle bore: 47 mm Spindle holder: size 6 Pick-up cone tailstock: 4 MK Spindle speeds: 28 - 1250 rpm Feeds: longitudinal/flat 0.03-1.3/0.008-0.33 mm/rev Thread pitches: 0.25 - 76 mm Electrical connection: 380 V, 3 kW Space requirement: 2800 x 1100 x 1600 mm Weight: 1330 kg

Offer 24177 Specifications: - Tip height 180 mm - Center width 1000 mm - larger circulation – Ø over bed 355 mm - via flat sleds approx. 200 mm - Spindle bore 36 mm - Pick-up cone of the tailstock quill MK 5 - Travel of the tailstock quill 260 mm - Spindle speeds 18 - 1800 rpm -Feeds - Travel of the cross slide approx. 200 mm - Travel of the upper slide approx. 115 mm - Drive 400 V / 5.8 kW - with: - Tailstock, 3-jaw lining, bezel - Steel holder, moving center punch, - Chip tray - Space requirement approx. W 2500 x H 1500 x D 1200 mm - Weight approx. 2100 kg

Key data: 1059 KW, 1500 1/min

Mitsubishi S16N - PTA Diesel Generator 1059 kW, low running hours Mitsubishi S16N - PTA Diesel Generator Description: The Mitsubishi S16N - PTA is a 1059 kW diesel generator designed for industrial use. It provides reliable power for large applications, powered by a Mitsubishi S16N engine. This model is built for durability and efficiency, offering long-term performance with minimal maintenance. Technical Specifications: Model: S16N - PTA Year: 1989 Power Output: 1059 kW / 1320 kVA Engine Type: Mitsubishi S16N (16-cylinder, naturally aspirated) Fuel Type: Diesel Speed: 1500 RPM Voltage: 400/230 V Frequency: 50 Hz Cooling System: Water-cooled Alternator: Synchronous, brushless Fuel Consumption: 210-220 g/kWh (approx.) Starting System: 24V electric start Feel free to contact if you require any further information, contact us at: Info@ukpowergeneratorsl ...

Key data: 588 KW, 380 1/min

In very good condition Rotating Removed due to scrapping of ship

Peugeot Citroen PSA HM01 1.5 VTI engine parts. Parts taken from one petrol engine with ca. 50.000 km. Parts are: motor head, main block, pistons, main shaft, oil pan, oil pump and all bolts.

Manufacturer: Engel Verstellmotor Geräteträger, Year: 1994, Type: Serie A/GNM 4150-B5.2, Volt/Hz: 42/3,1 mpere, pm: 3000, Year :1994

Manufacturer: Perske Umformer, Type: 30 DW 14/2, Hz 1: 50, Hz 2: 100, KVA: 30,

Manufacturer: Perske Umformer, Type: DA 12-2, Amper 1: 43, Hz 1: 50, Hz 2: 100,

Manufacturer: IMA, Motor mit Getriebe: yes, Getriebe: K803AB0570D132L4, Amper 1: 50, Power kW: 9,2, N1-U/min: 1598, Motor mit Getriebe: yes, Getriebe: K803AB0570D132L4, Year :1996

Manufacturer: Perske Fräsmotor Hydrospindel, Type: Fräsmotor, Maschinennummer: KCS 72.24-2 D, aus Maschine: Homag, Amper 1: 22,5/13/20, Hz 1: 50/100/120, Power kW: 7/11, Speed rpm: 2870/5880,

Manufacturer: Indramat Permanent Magnetmotor , Type: MDD112B-N-040-N2L-130GA0, Motor with gear: n 4000 Umin, Gear: Km 0,42 Nm/4, Maschinennummer: MDN 17,5, From machine: IDN 41,5,

Manufacturer: IMA , Type: Fügefräsen, Motor with gear: 2 Motoren steuerbar und verstellbar, Spindle length mm: ca.60, Motor with gear: 2 Motoren steuerbar und verstellbar, Speed rpm: ca.2,2 kw/5860 , Overhauled on: inkl. Haube,

Manufacturer: SEW Getriebemotor 20 Hohlwelle 0,25 kw, Type: SA 37/T DR63L4/TH, Motor with gear: yes, From machine: Transportband, Power kW: 0,25, Volt/Hz: 220-380/50, pm: 1300/30/1600/37, Motor with gear: yes, Bore mm: 20, FREE TEXT: Mit Drehmomentstütze,

Manufacturer: IMA Kantenfräsen tastend von oben, V1: 133, Hz 1: 200, Power kW: 1,8, Speed rpm: 11575,

Manufacturer: IMA, Type: Radiusfräsen, Gear: 2 Motoren tastend oben und Seite, Power kW: 1, Volt/Hz: 133, pm: 11500, Gear: 2 Motoren tastend oben und Seite,

Manufacturer: SEW-Motor mit Antriebsriemen, Type: K 37 DT 80, Motor with gear: yes, Maschinennummer: 50.01013736.01.0001.02.03, Power kW: 0,75, Motor with gear: yes, Speed rpm: 2700/303.0,

Manufacturer: Siemens Achsmotor für Ima Maschine, Type: 1FK6063-6AF71-1AG0, Motor with gear: yes, Maschinennummer: YF M110 5834 02 003, From machine: IMA BIMA, Motor with gear: yes,

Manufacturer: Heesemann Spindelhubgetriebe 2 Stück, Type: aus Heesemann LSM 8, Motor with gear: 2 Stück Verstellung Schleifaggregate, Motor with gear: 2 Stück Verstellung Schleifaggregate,

Manufacturer: Heesemann Spindelhubgetriebe, Type: aus LSM 8, Year: 2 Stück, Year :2 Stück

Manufacturer: Heesemann Motor Querschleiffaggregat ATB Loher, Type: AF 160 L/4/2F-21, Maschinennummer: 3716729-20, From machine: Heesemann Schleifmaschine, Volt: 400, cos: 0.90/0.95, IP: 54, Power kW: 13/17, Volt/Hz: 400, pm: 1470/2945,

Manufacturer: Perske Fräsmotor, Type: KNS 70.12.-2-01, Btr:: 12-6,9, Schaltgr.: 50-100, Iso/kl: 3/4,4, IP: 220-380, MdN Nm: 2880/5880, Motor mit Getriebe: yes, machine ready for demonstration: Frässpindel 30 mit Keilnut 10 mm/ mit Aufsatzgetriebe für Höhere Drehzahlen/ein und Aussteuerbar,

Manufacturer: Heesemann Motor Vorschub Transport mit Gebtriebe, Year: ca.1996, Motor with gear: yes, Gear: Stöber Getriebe, From machine: Heesemann LSM , Motor with gear: yes, Gear: Stöber Getriebe, Flange motor design: yes, Bore mm: Hohlwelle 60 mm, FREE TEXT: Hohlwelle 60 mm, Year :ca.1996

Manufacturer: Weeke Fräsmotor C-Achsmotor SMZ-Indramat, Type: SMZ DIS.E13676/Indramat MKD041B-144-KG0-KN, Hz 1: 800, Power kW: 7,5, Volt/Hz: 315/380/400/482, pm: 12000/14450/24000,

Manufacturer: Siemens, Type: Synchron-Servomotor 1FK6, Year: 2000, Motor with gear: no, Maschinennummer: MO99 5712 01 003, From machine: IMA BIMA 410, Volt: 270, Ampere 1: 4,5, IP: 64, Motor torque Nm: 6.0/4.0, pm: 3000/3900, Series: 1FK6060-6AF71-1TB0, Motor with gear: no, with motor brake: Ja, FREE TEXT: Brake 24 V/ 15,6 W , 6-poliger Motor, 100K, 3000 1/min selbstgekühlt, IM B5 (V1, V3) Leistungs-/Signalstecker Stecker 270 Grad drehbar, Year :2000

Manufacturer: Homag Synchron Aggregateverstellspindel, Gear: 1512-2-8213 AB04J22.04, Gear: 1512-2-8213 AB04J22.04,

Manufacturer: Weeke Z-Achsmotor, Type: Mdd071B-N-060-N2S-095PL1, Volt: 24, Motor torque Nm: 4.40/6.60, IdN A: 15.00/22.60, n-min: 6000, Weight approx. kg: 9,

Manufacturer: SEW EURODRIVE, Type: A2E170-AA11-65/R60DT7ID4BM, Volt: 220/266, Ampere 1: 0.22-0,35, Motor torque Nm: 5, pm: 2700/300, Watt: 46-78, Weight approx. kg: 28,

Manufacturer: Indramat Weeke Permanent Achsmotor, Type: MDD071B-N-060-N2S-095PL1, Year: MDD071-17391, Flange motor design: U/min 6000, Foot motor design: KM 0,29, Diameter mm: Gewicht 9,1 Kilo, Bore mm: 6,6 Nm, Year :MDD071-17391

Manufacturer: Weeke Z-Achsmotor, Type: MDD07B-N-060-n2S-095PL1, Volt: 24, Motor torque Nm: 4.40/6.60, IdN A: 15.00/22.60, N1-rpm: 6000, Weight approx. kg: 9,

Manufacturer: Perske Fräsmotor mit Hydrospannung, Type: KRSV 61.13-2 D, Flange motor design: 4,5-7.5 kw , Foot motor design: U/min 9570-17550, Diameter mm: Hz 167-300, Bore mm: Volt 194-350,

Manufacturer: Weeke CNC C-Achsmotot Indramat Permanent Magnet Motor , Type: MDD071B-N-040-N2S-095GAO, Motor with gear: yes, Gear: yes, From machine: Weeke, Motor with gear: yes, Gear: yes,

Manufacturer: Siemens Getriebemotor, Type: RPL 40-1 H 9486 1/5 BK, Volt: 375, n-min: 18, pm: 4800, Weight approx. kg: 50,

Manufacturer: Indramat Motor Y-Achs Antrieb Weeke/Homag , Type: MDD071B-N-040-N2S-095GA0/7P010-MF1-10-040-000, Maschinennummer: MDD071-17390, Motor torque Nm: 4.40/6.60, IdN A: 11.00/16.60, pm: 4000/6000,

Manufacturer: Indramat Permanent Magnet Motor, Type: MDD071B-N-060N2S-095PL1, Year: MDD071-17392, Flange motor design: U/min 6000, Foot motor design: KM 0,29, Diameter mm: Gewicht 9,1 Kilo, Year :MDD071-17392

Manufacturer: Siemens, Type: Bürstenloser Sevomotor, Year: 2000, Motor with gear: yes, Gear: TP 010-MX1-10-051-000, Maschinennummer: 1FK6063-6AF71-1AG0, From machine: IMA BIMA 410, Volt: 270, Ampere 1: 8,3, IP: 64, Motor torque Nm: 11.0/6.0, pm: 3000/3900, Motor with gear: yes, Gear: TP 010-MX1-10-051-000, Flange motor design: yes, Year :2000

Manufacturer: Perske Fräsmotor mit Nutenstein Mitnehmer, Type: KCS 71.16-2 D, Amper 1: 14,5/8,4/12, Hz 1: 50/60/120, Power kW: 4,4/6,6, pm: 2870/5870,

Manufacturer: Perske, Type: KCS 71.16.-2 D, Amper 1: 14,5/8,4/12, Power kW: 4-6, pm: 2870/5870,

Manufacturer: Perske Fräsmotore verstärkte Ausführung, Year: VS.42.20-2, Motor mit Getriebe: 794929, Sek:: IMA, Btr:: 794929, Series: yes, Motor mit Getriebe: yes, Installation height: 133 Volt, Length mm: 200 Hz, Anschlussspindel mm: U/min 11530, Year :VS.42.20-2

Manufacturer: 2 StückPerske, Type: Ritzmotor Homag FPL 526, Motor with gear: KNS 51.14-2 D, From machine: Homag Maschine, Spindle length mm: ca.60, Diameter of the spindle mm: 30, Power kW: 1,0/2,0, Volt/Hz: 50-60-120, pm: 2750/5700/3380/6920, Motor with gear: KNS 51.14-2 D, Price per unit Euro: 600, FREE TEXT: Spindeldurchmesser 30/Länge mm ca. 55 mm,

Manufacturer: Lenze Motor mit Getriebe, Year: GST89-3 Y VBR 071, Type: CLP HC 320, Motor mit Getriebe: GT/30476065, Year :GST89-3 Y VBR 071

Manufacturer: Motovario Neu, Year: Winkelgetriebe, Motor with gear: 20-1041169961, Ampere 1: 50/0,25 kw, Year :Winkelgetriebe

Manufacturer: Homag, Type: Ritzsäge Nachschwenkeibrichtung für links und rechts, From machine: Homag FPL, Shaft dimensions L x D mm: 1200,

Manufacturer: Homag, Type: Motorhalterplatte mit pnematischen ein und Ausrücken, From machine: Homag FÜL 526,

Manufacturer: Perske, Type: KNS 70.12-2 D, Volt: 220/380/380, Hz 1: 50/100, Power kW: 2,2/3,3, pm: 2860/5895, Shaft dimensions L x D mm: 35 , Available: sofort,

Manufacturer: Homag , Year: ca.1995, Type: SEW, Motor mit Getriebe: Motor mit Gertriebe, Getriebe: für Vorschubkette, aus Maschine: KL 79, Motor mit Getriebe: Motor mit Gertriebe, Getriebe: für Vorschubkette, Year :ca.1995