jenbacher 420 used for sale

I have to sell Injection moulding machine Arburg 420M 1996 23500 hours. The machine is great condition with brand new oil 08.2020 Can see to work at anytime.

Used thermoforming roll line by Tepro, model LPP 420-30/3618. New: 2014. Machine serviced, very good condition. Technical data: Machine stroke mm 300 Forming chamber mm 282x356 Pressing depth mm max. 130 Filling field length mm 900 Distance between tools mm 1800 Efficiency cycle/min 4-12 Vacuum pump m3/h 100 Power supply V/Hz 3x230/50 Power kW ~ 13.5 Compressed air pressure bar min. 6 Cooling water consumption l/min 8-15 Compressed air consumption Nl/cycle 100-150 Width of the upper foil mm 420±1 Bottom foil width mm 420+2 Max. bottom foil thickness (soft / hard) mm 0.3 / 0.6 Max. bottom foil diameter mm 400, sleeve 76 Max. top foil diameter mm 400, sleeve 76 Weight kg ~1300

Arburg 420C-1300-675 (167) Item number: 167 Availability: In stock Year of construction: 2000 Brand: Arburg Specifications Spray weight: 297 g Clamping force: 1,300 kN Screw diameter: 50 mm Spray pressure: 2080 bar Spar spacing: 420 x 420 mm Clamping plate size: 615 x 615 mm Tool installation height min.: 350 mm Control: Selogica Language: German Power: 44.9 kW Operating hours: 84840 h Weight: 4330 kg Dimensions: 4.9 x 1.8 m Funnel: No Core train: Yes Air valve: Yes

Key data: 1000 , 158 , 40

In our stock in Wellingborough, Northamptonshire is this fully refurbished Arburg 420C 1000 – 250 VU injection moulding machine with vertical clamp and injection. Ideal for insert moulding as an operator can easily and ergonomically load inserts. The vertical clamp means inserts are more likely to stay in place. This machine has a 40mm plasticising unit which gives a maximum shot weight of 158 (PS) (g). As you’d expect from us, this machine has been fully refurbished and is now completely fault & leak free. With low lifetime hours of only 23k, it really is in excellent condition throughout. The plasticising unit is holding max pressure throughout the range, the pump is quiet, the platens are in great order and we’ve done great work with the general cosmetics. Machine is now available for a full demonstration as and when required. Refurbished machines from STV Machinery undergo  ...

Novastilmec shear with cutting capacity 4200 mm x 12 mm thick. Cutting angle, gap between the blades and support of the automatic sheets. Sheet metal stop 1005 (incidentally cuts the paper again).

Used Imal LEXUS 420.71 Press brake cnc/nc Complete with sheet metal guides Used very little Useful Length 7100 Capacity 360 Ton

Manufacturer: Arburg Model: 100T 420 C 100 - 250 CENTEX Year of manufacturing: 1999 Capacity: 100 Tn

Closing force: 100 T Opening stroke: 500 mm Between columns: 420 x 420 mm Tray dimensions: 600 mm X 600 mm Mini/maxi mould: 250 mm Max gap between trays: 750 mm

SOLLAS SB 420 Wrapper Sollas sb 420 2001 SOLLAS SB 420

Injection moulding machine ARBURG Allrounder 420 A 1000-400 Warehouse No.: 503130 Manufacturer: ARBURG Type: Allrounder 420 A 1000-400 Control: Selogica Year of construction: 2005 Operating hours: 31000 h Technical data Close page Clamping force: 1000 kN Holmass v: 420 mm Holmass h: 420 mm Plate size h: 570 mm Plate size v: 570 mm Installation height min.: 250 mm Installation height max.: 500 mm Plate height max.: 850 mm Opening distance: 350 mm Ejector stroke: 150 mm Ejector force: 40 kN Centering movable plate D: 125 mm Centering fixed plate D: 125 mm Technical data spray side Screw diameter: 35 mm Displacement: 154 cc Spray pressure: 2500 bar Screw length: 23 l/d Screw stroke: 160 mm Screw speed: 47 min Screw torque: 560 N Injection flow to the outside: 192 g/s hp Number of heating zones: 4 Nozzle travel: 300 mm Dimensions & Weight Machine dim ...

Arburg 420C-1000-250 (176) with challenge tape Item number: 176 Availability: In stock Year of construction: 1998 Brand: Arburg Specifications Spray weight: 89 g Clamping force: 1,000 kN Screw diameter: 30 mm Spray pressure: 2470 bar Spar spacing: 420x420 mm Clamping plate size: 570x570 mm Tool installation height min.: 250 mm Control: Selogica Language: German Power: 25 kW Operating hours: 70,643 h Weight: 3180 kg Dimensions: 4.5x1.7 m Funnel: No Core train: Yes

Used industrial robot including control system in very good condition, Ready for immediate use Suitable for welding/spot welding, machine operation, material handling and much more. Payload: 120 kg Reach: 2413 mm Axles: 6 With its six axles, the Fanuc S-420F is capable of precisely moving heavy payloads of up to 120 kg. Due to the wide range of possible applications, there are practically no limits to the Fanuc S-420F. It offers consistent cycle times and handles heavy lifting, spot welding, and pick & place effortlessly. Absolutely professional machine from the market leader for automation FANUC - yet easy to use / program. Despite its large working area, the robot requires a comparatively compact footprint. The Fanuc S-420F RJ2 is designed for ground mounting and weighs a whopping 1600 kg. Movement Speeds: J1 90 °/s (1.57 rad/s) J2 90 °/s (1.57 rad/s) J3 90 ...

Arburg 420C-1000-350 (174) with challenge tape Item number: 174 Availability: In stock Year of construction: 2001 Brand: Arburg Specifications Spray weight: 210 g Clamping force: 1,000 kN Screw diameter: 45 mm Spray pressure: 1670 bar Spar spacing: 420x420 mm Clamping plate size: 570x570 mm Tool installation height min.: 250 mm Control: Selogica Language: German Power: 32.2 kW Operating hours: 89,240 h Weight: 3430 kg Dimensions: 4.4x1.7 m Funnel: No Core train: Yes Euromap: Yes Air valve: Yes

Piller UPS System UBR 420 5/5 690A 50Hz 400V, 4pcs

Demag concept 420/810-2300 year 06 We offer a Demag injection molding machine in working condition. Used only in morning shifts and in semi-automatic mode. Must be seen in operation at our injection plant

Arburg 420C-1300-350 (172) with challenge tape Item number: 172 Availability: In stock Year of construction: 2004 Brand: Arburg Specifications Spray weight: 243 g Clamping force: 1,300 kN Screw diameter: 50 mm Spray pressure: 1360 bar Spar spacing: 420 x 420 mm Clamping plate size: 605x605 mm Tool installation height min.: 250 mm Control: Selogica Language: German Power: 32.2 kW Operating hours: 81,110 h Weight: 4080 kg Dimensions: 4.4x1.9 m Funnel: No Core train: Yes Euromap: Yes Air valve: Yes

Used band saw from MÖSSNER MÖSSNER RECORD SSF 420 Band Saw IDEAL BSO/16 Band Saw Welding Machine Roll diameter 420 mm Projection 410 mm passage height 265 mm Table size 600 x 600 mm Table left + re. swivel 15 / 30 ° each Saw blade length 3150 - 3260 mm Saw band width 3 - 16 mm Cutting speeds infinitely adjustable Current 400 V / 16A Weight approx. 600 kg Space requirement approx. W 900 x H 1900 x D 1000 mm Grindstone, band scissors, lighting Good condition See pictures Viewing and pick-up possible Shipping Germany (without islands) 139,00 Euro net The goods can be viewed at the location 59379 Selm by appointment. Company Michael Bergau Tel. 0152/29500504 You will receive an invoice with VAT shown. Payment: Payment by bank transfer before delivery of the goods. Or cash payment on collection.

This Yida BML-420 Lathe was built in Taiwan in the year 2011. It is equipped with a Fanuc control unit. The machine has a spindle speed of 3500 rpm.

This GILDEMEISTER CTX 420 V6 linear Lathe was made in 2007 and has 10282 production hours, of which 6954 are working hours. It is controlled by a SIEMENS 840D POWERLINE control unit. The machine has a spindle speed of 6000 rpm.

Key data: 420 mm, 650 mm

Article number: 19-03-028 Manufacturer: Kasto Good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1980 L x W x H: approx. 1300x800x1400mm Weight: approx. 1000kg Saw blade dimensions: approx. 650x55x2.5mm Cutting range: 90 degrees Round: approx. Ø420mm Square: approx. 300x300mm Flat: approx. 420x420mm Cutting range: 45 degrees Round: approx. Ø320mm Square: approx. 260x260mm Flat: approx. 320x260mm Mitre cut: approx. 0-45 degrees Accessories  Cutting pressure adjustable  Adjustable number of strokes  Coolant device  Footswitch  Turntable Other accessories on request Price and other technical data on request

screw size: unbkt mm injection shot weight in Polysterol: unbkt g/PS closing pressure: 100 kN total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Screw diameter: 40 mm Calculated injection volume: 231 cm3 Length/diameter ratio: 20 L/D Pressure on the material: 2020 bars Closing unit Minimum mold thickness: 800 mm Max distance between trays: 650 mm Passage between columns: 420 x 420 mm Dimensions of trays: 590 x 600 mm General Heating power: 22 kW Total installed power: 33 kW Oil quantity: 180 L Dimensions: 4.2 x 2 x 1.4 m Weight: 4000 Kg Other Commissioned: 2007 Tonnage: 80

A programmable all-rounder in top condition for many measuring tasks last manufacturer maintenance from April 2023 3-axis CNC control Control of axis movement and speed control via joystick Built-in color camera Zoom lens (0.7x - 4.5x) motorized with autofocus LED ring light: 1 ring and 4 segments, each individually switchable and dimmable LED transmitted light: dimmable Solid base made of hard granite Sturdy steel cross table, precision bearing Excellent accuracy and reliability due to optical incremental measuring system Measuring range X/Y in mm: 200 / 100 Measuring system - resolution in mm: 0.001 Measuring system - E1 X/Y in μm: 1.9 + (L/100) Measuring system - E2 XY in μm: 2.9 + (L/100) Magnification: 35 - 225x 23" touchscreen with integrated PC, keyboard and mouse operation via multi-touch on the screen or with mouse/keyboard joystick M3 Software

– German production, instruction manual – year of manufacture 2008 – automatic material collection TECHNICAL PARAMETERS: cutting length max. 4200 mm cutting width max. 800 mm cutting height max. 130 mm feed smoothly adjustable up to 80 m/min main engine power 11 kW disc diameter max. /Min. 600 mm / 400 mm possibility to program 100 dimensions line laser two-stage blade feed touch panel control connection diameter 2 x 160 mm machine dimensions (L/W/H) 620 / 160 / 220 cm weight 2250 kg

Buhler Pellet Mill Pelleting Machines 420 pellet mill feeding and conditioning 110 kw

Automatic injector 216 needles Type: ІМАХ 420 Product width: 420 мм. Cycles: from 15 to 60 Feed max.: 60 mm. Product height: 130÷220 mm Number of needles: 216, 3 mm. Brine pressure: 0,5-4,5 bar Machine charging height: 1150 mm Compressed air min. 6 bar Voltage: 230/400 V, 50/60 Hz Connection: 14,0 kW ; 32А Rotary brine filter: DF 510 Dimensions, mm: Machine length: approx. 2200 Machine width: approx. 1350 (approx. 2200 mm with filter) Machine height: approx. 2300 Weight: 1500 kg.

warehouse no.: 503174 manufacturer: DEMAG type: ERGOtech 1000-420-310 controller: NC 4 year of construction: 2002 clamping force: 1000 kN distance between tie-bars h x v: 420 x 420 mm size of mould plates h x v: 600 x 600 mm min. mould height: 250 mm max. open daylight: 750 mm opening stroke: 500 mm screw diameter: 35 mm swept volume: 168 ccm injection pressure: 2020 bar equipment included screen text german CEE-socket 16A complact flash drive core pulling hydraulically 1x air valve 1x machine incl. Handling machine incl. water flow regulator machine without material hopper Anti vibration mounts electric interface for handling units according to Euromap 12 Schuko-socket 10A Schuko-socket 10A measures of machine l x w x h: 4.2m x 1.4m x 1.8m total weight: 3700KG technical data robot-system handling type: Linear manufacture: Wittmann controller: W7 ...

Screw diameter: 30 mm Displacement: 74 cm³Injection weight in polystyrene: 66 g/hp Injection pressure: 2,020 bar Clamping force: 50 t Lights tie bar distance H x V: 420 x 370 mm Tool installation height min.: 200 mm Opening distance: 340 mm CONTROL: NC4 Screen text: german / english Operating instructions: german / english FHK interface for robots: Yes Core pull: 1x Pump drive power: --- Total connection load: 33 kW Total weight: 4,750 kg Dimensions L x W x H: 4.3 x 1.1 x 2.0 m m m m Terms of payment: 100 % before taking over the machine, strictly net

The scope of delivery includes: 01x wire mat, used Material color: sendzimir galvanized Total width: approx. 4,200 mm Total depth: approx. 1,020 mm Mesh size: approx. 50 x 50 mm Wire thickness: approx. 3.00 mm

Vertical band saw MÖSSNER type Rekord SM 420 Masch. No. 25615 Year of construction 1983 Roll diameter 420 mm Projection in width 410 mm Projection in height 295 mm Table size 600 x 600 mm Belt speed 12-375 m/min. 8 steps Saw blade length min/max. 3150 / 3260 mm Drive power 1.1 / 1.7 kW Mains connection 380 Volt, 50 Hz - Butt welder IDEAL BSO / 16 with scissors and whetstone - 4 gear stages + 2 engine speeds - Belt guidance Height adjustment with handwheel - Work table tiltable +/-45 - Work table tiltable 10- Foot switch for on-off Space requirement L x W x H 1000 x 800 x 1970 mm Weight approx. 600 kg very good condition; used

Vertical band saw MÖSSNER REKORD type SM 420 Masch. No. 17010 Year of construction 1968 Roll diameter 420 mm Projection in width 415 mm Projection in height 265 mm Table size 605 x 600 mm Belt speed 18 - 562 m/min. 8 steps saw band length min/max. 3150 / 3260 mm Drive power 1.1 / 1.7 kW Mains connection 380 V 50 Hz band saw blade speed via 4 gear stages and 2 motor speeds - saw blade butt welding machine IDEAL BS 0-16 with scissors and whetstone - swivel work table in 2 axes Space requirement L x W x H 950 x 750 x 1900 mm Weight 570 kg good condition; used

measuring range X-axis:150- 300 mm measuring range Y-axis: mm Table dimensions: mm measurement range Z =:450 mm enlargement:20 X fine adjustment:+/- 5 mm compressed air:6 bar dimensions:2 x 1,5 x2 m machine weight ab.:150 kg

Line consisting of an FBM Maestria coating machine and its SOLLICH MK 420 cooling tunnel

Cutting speed: 10-1200m/min, power: 2.3kW.

With documentation, without accessories or documentation, has been regularly serviced, an on-site inspection is possible, video is available.

Connected load: 2kVA, an inspection is possible.

Saw blade diameter: max. 250mm, motor speed: 2800rpm, saw shaft speed: 3800rpm, saw blade bore: 20mm. Max. Cutting height 90°/45°: 82/55mm, table size: 710 x 900mm, angle adjustment: 0° to 45°.

Diameter of the roll: approx. 420mm, projection in width: approx. 415mm, projection in height: approx. 265mm, table size: approx. 600x600mm, saw-band speed: 18-562m/min, 8 steps, saw band length min./max.: 3150/3260mm, table swivel in two axes.

Max. batch weight: 100kg, heating output: 59kW, with documentation, was maintained regularly, an inspection is possible.

Bar diameter: 25mm, max. bar length: 4200mm, with synchronous device, available in the end of 2023.

Eroding diameter: 100-420mm, max. roll length: 2500mm, roll weight: 8t, eroding length: 11mm, number of electrodes: 60, length: 5000mm, width: 2000mm, height: 1200mm, weight: 25t, with documentation, inspection is possible.

Connected load: 42kW.

Clamping force: 100t, heating output: 6,1kW, connected load: 35kW, weight: 3.95t.

Clamping force: 420t, screw diameter: 70/ 15mm, injection volume: 1212/ 292cm³, length: 7900mm, width: 2200mm, height: 5000mm, weight: 25t, with robot.

Screw diameter: 35mm, operating hours: 73,500h, on-site inspection is possible.

Distance from the surface: 12mm, length: 455mm, width: 370mm, height: 524mm, weight: 24.5kg, with documentation.

Size: 420 mm Equipments: as is standart equipment

; Transport weight [kg]: 1000

; Transport weight [kg]: 1180

Description SERVO PUMP WITH BRUSHLESS DRIVE 6 HOT ROOM ZONES EUROMAP 67 INTERFACE COLORIZER INTERFACE BATTERY WITH 3 ADDITIONAL FLOWMETERS