jenbacher 420 used for sale

Conveyor belt, belt conveyor, metal conveyor belt, wire belt, link belt, round wire link belt, wire eyelet link belt, wire eyelet link belt -Conveyor belt: round wire link belt stainless steel -Width: 420 mm -Length: 3850 mm -Transport dimensions: 570/420/H470 mm -Weight: 24 kg

Compressor control, compressor control, control panel, control box, control unit -Manufacturer: Demag, compressor control from screw compressor type 350WS -Module: BT SBE 42008 TW-2294V-0 -Individual components: see photos -Dimensions: 395/105/H25 mm -Weight: 0.3 kg

Crane block, crane hook, load hook, single hook, bottom block -Crane block: Crane hook load capacity t -Rope groove: see photos -Dimensions: 420/170/90 mm -Own weight: 6.3 kg

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker -Tool cabinet: Steel cabinet with 2 doors, solid construction with 1 shelf -Width: 560 mm -Depth: 420 mm -Height: 890 mm -Shelves: See photos for layout/height -Door: lockable, without a lap -Weight: 47 kg

Tires, solid rubber tires, forklift tires, solid rubber bandages, solid rubber elastic bandages -Manufacturer: Renger, solid rubber tire, solid rubber elastic bandage with rim -Bolt circle: Ø 142 x 18 mm -Hub bore: Ø 110 mm -Quantity: 1 tire available -Dimensions: Ø 420 x 80 mm -Weight: 22 kg

width: 920 mm depth: 420 mm height: 1950 mm weight: 70 Kg Practical tool cabinet with 4 shelves Color RAL 6035 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Saw blade Diameter 350 mm Projection 77 mm Projection 45° 54 mm Clamp opening 84 mm Cutting size 4210x5140 mm

Manufacturer: CFS (GEA) Type: Compact 420 YOM: 2010 El. specs: 28 kW, 42 A, 400 V, 50 Hz Labelling machine: Manufacturer: CFS Type: TiroLabe TL-150 YOM: 2010 includes 4 format sets Vacuum Pump: BUSCH R5 Includes ESPERA outfeed conveyor Condition: very good

saw blade diameter: 420 mm capacity 90 degrees: round: 130 mm capacity 90 degrees: flat: 160 x 100 mm capacity 45 degrees: round: 110 mm capacity 45 degrees: square: 130 x 80 mm turning speeds: 3000 U/min engine output: 2,0 kW total power requirement: 2,0 kW weight of the machine ca.: 190 Kg dimensions: 3,0 x 1,0 x 1,3 m Underfloor aluminum circular saw - Hydropneumatic semi-automatic - pneum. Workpiece clamping device - Roller conveyor with material stop - Machine feet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1300 , 40

Screw diameter: 40 mm Injectable volume: 182 mm Injection pressure: 2120 mm Passage between columns: 420 x 420 mm Opening stroke: 500 mm Core: 1 Blower: Robot Interface

Catalog No. : 7418 Type: Concept 420/810-2300 Producer: Demag Made in: 2006 Characteristic: Clamping force: 420 t Closing force: 4200 kN Screw diameter: 70 mm Injection capacity: 891 cm³ Injection weight: 800 g Height of the plate for mounting the mold: 1200 mm Width of the plate for mounting the mold: 1100 mm Distance between the columns (horizontal): 800 mm Distance between the columns (vertical): 710 mm Maximum injection pressure: 1877 bar Mold height: 820 mm Machine length: 7800 mm Machine width: 2200 mm Machine height: 2400 mm Weight of the injection molding machine: 20000 kg

Hydraulic injection moulding machine manufactured in 2011. This Krauss Maffei 420-4300 CX features a clamping force of 420 t and a screw diameter of Ø 90 mm. It offers a maximum mould opening of 1400 mm and tie bar spacing of 800 × 800 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 420-4300 CX machine we have for sale. Contact us for further details regarding this machine.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

; Transport weight [kg]: 1180

Milling machining center CNC Hedelius Tiltenta T7-4200

Interroll roller conveyor falling conveyor 1470-2155-490-420 RA1981 Brand: Interroll Roller width (RB): 420 mm Nominal/outer width (NB): 490 mm length: selectable between 1470 mm and 2155 mm Diameter rollers: 50 mm roller distance: 90 mm Roller conveyor drive: no drive Frame height: 115 mm Optionally available: Supports Side guide on one side and on both sides Not the right one for you? On our website you will find more articles or simply contact us. Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 2015 condition: very good (used) Conveying length in mm: Bitte wählen Nominal / outside width in mm: 490 Roll width in mm: 420 Roll division in mm: 90 Driven: NO For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look for ...

; Transport weight [kg]: 1000

Interroll roller conveyor falling conveyor 720-490-420 RA1982 Brand: Interroll Roller width (RB): 420 mm Nominal/outer width (NB): 490 mm length: 720 mm Diameter rollers: 50 mm roller distance: 90 mm Roller conveyor drive: Interroll Drum motor Conveying speed: Freely adjustable with Interrroll controller Frame height: 115 mm Optionally available: Supports Side guide on one side and on both sides Not the right one for you? On our website you will find more articles or simply contact us. Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 2015 condition: very good (used) Conveying length in mm: 720 Nominal / outside width in mm: 490 Roll width in mm: 420 Roll division in mm: 90 Driven: YES For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement ...

Key data: 4200 kN

Machine in production !1

Groen DEE 420 tilting kettle Serial: 67305 Stainless, floor standing tilting kettle, capacity 75L, manual tilt discharge, jacketed, 3Ph

Machine type: MIG/MAG welding machine Type PowerMAG MM 4200 W complies with the EU Eco-Design Regulation No 2019/1784 Connection voltage 3 x 400 volts Adjustment range 40 – 420 amps Duty cycle 60% ED at 420 amps 80% ED at 360 amps 100% ED at 325 amps Current setting 21 switching levels Cooling transformer by built-in fan Cooling burner water-cooled Design of mobile compact system Wire feeder 4-roller drive Fuse 32 Amps Dimensions L x W x H 900 x 400 x 650 mm Weight 110 kg Age 3 months Condition workshop tested, like new, incl. UVV test report Scope of supply welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer 1 roll of welding wire 1 can of non-stick spray 1 Piece Instruction Manual Warranty 24 months from the date of delivery List fa ...

Output infinitely variable up to 70 packs / min. with self-cleaning vacuum filter with automatic bag magazine with integrated clipping device with date printer completely stainless steel clad with TOUCH control

Key data: 500 mm, 600 mm

Stock-No. 1105-04027 Type of machine CNC Lathe - Inclined Bed Type Make GILDEMEISTER Type CTX 420 LINEAR Year of manufacture 2003 Type of control CNC Storage location FRANCE Country of origin Germany Delivery time available at short notice Freight basis ex Showroom Technical details turning diameter 320 mm turning length 600 mm turning diameter 320 mm control Siemens 840D Travel -X Axis 260 mm Travel -Z AXIS 635 mm swing diameter 680 mm swing diameter over slide rest 365 mm Spindle Bore Diameter 87 mm Turret (X-Stations) 12 Mainspindle Speed 5000 1/min Rapid Traverse X + Z AXIS 24/30 m/min drive capacity - spindle motor 21 kW connected load 40 kVA dimensions 4.32 x 1.72 x 1.77 m Additional information CONTROL SIEMENS 840D 4 AXIS MACHINE WITH Y AND C AXIS AND SOME LIVE TOOLS INCLUD WITH SHOP TOWER NICE MACHINE WITH LINEARTECHNIK

roll diameter: 420 mm throat: 410 mm saw band length: 3150 - 3260 mm saw band width: 3-16 weight: ca. 600 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 420 mm saw band length: 0 mm cutting width: 0 mm total power requirement: kW weight of the machine ca.: 1 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

range L-W-H: 400x300x200 mm saw diameter: 420 mm weight of the machine ca.: 3500 kg Producer: KASTO Type: HBA 420U Year of manufacture: 1985 Dimensions (width x height x depth): approx. 400x200x300 cm At7Zcq Fully automatic NC horizontal bandsaw 1 chip conveyor, 1 external chip conveyor, 1 person. driven roller conveyor approx. 450 cm. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 325 mm turning length: 600 mm control: Siemens type: 840D Turret 12-fold, 12 stations: live tooling: turning speeds: 5000 U/min power capacity: 25 kW y-axis: mm c-axis: total power requirement: 35 kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: 3,5x2,5x2,1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

2020 Giardiana DUAL TECH 420 SBC DRY Find more here - / Contact us at -

Burn-Drilling Rig Panel Processing Center Manufacturer: Vernet-Behringer Type: MAG EVO 420 Year of manufacture: 2018 CNC Control Power source Kjellberg HiFocus 360 Plasma cutting for material thickness: 5 to 50 mm Spindle speed: 160 – 4,000 rpm Auto. Revolver Tool holder: 14 Drive power: 16 kW Drilling diameter: 5 - 40 mm V-scoring scribing marking: 5 to 40 mm Sheet metal dimensions min.: 1,500 x 300 mm (750 x400 mm with restriction ) Minimum dimensions of finished parts: 80 x 80 mm Sheet weight max.: 2,600 kg and 650 kg/m Feed side: Roller conveyor for flat steel or plates: 4,000 x 2,000 mm Zero-position cross conveyor Number of cars: 2 pliers NC feed carriage, placed on the side 4 collets (2+2) 3 Short Stroke Cross Conveyors Working height: 1,000 mm Removal page: Discharge roller conveyor with lowerable unloading table with chute in Material c ...

2008 KRAUSS MAFFEI 420-700-520 CZ Injection moldin machine Machine was functional before conservation, for reuse is neccesary aditional checks and possible repair activities Find more here - / Contact us at -

feed pressure: 24 bar liter capacity: 160 l/min total power requirement: 1,5 kW weight of the machine ca.: . t dimensions of the machine ca.: . m High pressure pump The technical data are manufacturer or operator specifications and are therefore not binding for us. We reserve the right to prior sale, only our terms and conditions of business and sale apply. About usmore than 400 of our own machines in stockover 12000 m² storage area, crane capacity 70 tmore than 1000 articles accessories for your workshopIf you want to sell machines production lines or your company, please contact us.You will find further offers on our website. Visits are possible by arrangement.We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used stainless steel semi-automatic capcule filler Capsugel/Lonza Ultra III model CU-4204. Capacitu depending on product, operator and aplication between 4500-33000 capsules per hour. Powder feeder. Control Panel. Year of manufacturey 2019. Overall dimentions: width 1520 mm, depth 890 mm, height 1910 mm, weight 610 kg. Technical docuemtnation for the machine available.

range L-W-H: 3,50/2,40/2,20 mm weight of the machine ca.: 3500 kg Producer: KASTO, Type: HBA 420 AU, C93I8De Year of production: 1995 Fully automatic NC horizontal band saw with hydraulic clamping device up to 400 mm, 1 chip conveyor, 1 external chip conveyor, 1 roller conveyor, 1 roller conveyor, hydraulic drive, motor switched off, Dimensions (width x height x depth): approx. 400x200x350 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Meinert Plattenlager, Type: Puffer Portal P 420, Year: 2005, Storage program: 3-Teck, Online connection to following machines: Säge, Plattenstärken min-max mm: 16-25, Plattenlängen min-max mm: 240-2800, Plattenbreite min-max mm: 2100, Beschichtet Platten: yes, Massivholzplatten: yes, Halbformatplatten-Format: yes, Einlagerplätze: 5, Auslagerplätze: 1, Netto Platzanzahl: 35, Verstellbare Saugtraverse : yes, Span length mm: 9500, Geschwindikeitfahrträger Brücke m/min: X-80/Y-150/40-Z-40, FREE TEXT: 1 X Querverfahrwagen/Bodenrollenbahnen 4 Stück/, Year :2005

Tos FA5AV X: 1400 - Y:420 - Z: 400mm Max longitudinal travel X-axe: 1400 mm Max cross-travel Y-axe: 420 mm Max travel Z-axe: 400 mm Admission in millinghead: ISO 50 Table size: 1600 x 400 mm Power needed: 20.5 kW Weight: 5300 kg

turning diameter: max. 560 mm turning length: 600 mm control: 840D powerline Siemens greates pass round over bed: 680 mm Swing dia. over traverse guideway: 565 mm centre distance: 620 mm Main spindle:: turning speed range - main spindle: 20 - 5.000 min/-1 power capacity - main spindel: 25 / 37 kW max. Torque: 390 Nm spindle nose: 170H5 spindle bearing diameter: 120 mm usable bar diameter: 65 mm max. chucking diameter: 250 mm C-Axis: 0,025° / 360 ° Subspindel:: Spindle speed range subspindle: 20 - 7.000 min/-1 power capacity - Sub spindle: 25 / 33 kW max. Torque: 213 Nm spindle bearing diameter: 90 mm spindle bore: 57 mm spindle nose: 140H5 C-Axis: 0,025° / 360 ° turret:: number of toolpositions: 12 pos. Number of driven toolspositions: 12 pos. Spindle speed - driven tools: max. 4.500 min -1 power capacity - driven tools: 12,2 kW tool taper: VDI 40 DIN 69880 Tool dimensions with sq ...

A total of 8 partly dismantled Krauss Maffei injection molding machines are available. 1) Krauss Maffei 175-520-390 CZ, year of manufacture: 2008. 2) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008. 3) Krauss Maffei 110-380 CX, year of manufacture: 2016. 4) Krauss Maffei 420-700-520 CZ, year of manufacture: 2008. 5) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008, missing electrical parts. 6) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008. 7) Krauss Maffei 850-1400-1000 MX Z, year of manufacture: 2012, missing electrical and mechanical parts. 8) Krauss Maffei 110-380 CX, year of manufacture: 2016, missing electrical parts. All injection molding machines include robots from Kuka, Krauss Maffei, Sar, or Sepro. On-site inspection is possible.

x-travel: 4070 mm y-travel: 1185 mm z-travel: 1985 mm total power requirement: kW weight of the machine ca.: 15 t dimensions of the machine ca.: 6000 x 4500 x 4000 m Consisting of: Working Range: Measuring column, longitudinal movement, X Axis 4,070 mm Measuring slide, cross, as Y Axis (measuring head) 1,185 mm Measuring slide, vertical, as Z Axis (vertical) 1,985 mm Adjustment of measuring head, roll axis 360 ° pitch axis 220 ° Measuring table 5,000 x 2,000 mm Weight, approx. 15,000 kg Space required 6,000 x 4,500 x 4,000 mm Accessories / Special Features : o 3D tracer head, with turning/swivelling device. o Universal 3D Measuring Software, KOROS CAD 5.2.0 from November 2001 (with lots of enhancements), as well as HOLOS UX for manual or automatic measuring of all geometric elements and free-form surfaces, ideally on passenger car bodies, engineering parts and  ...

roll diameter: NA mm throat: NA mm workpiece height: mm working area: 200 mm workpiece dia.: 200 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Bandsaw for Butcher The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working widths: 4200 mm Roller width: 4400 mm Number of rollers: 2 x S-Walze Stück Swimming roll - dia: 350 mm Roller covering - soft rubber: 75 Grad shore Pressure line: 50 N / mm Pressure total: 22 to Liquor trough with guide roll: Capacity of dye tub: ca.130 Liter Cloth guiding system for woven goods: geb. Breithalter vor Fuge Hydraulic unit for separately pressure: Drive shaft: ohne Antrieb • Dyeing padder with two Swimming Rolls, horizontally arranged, • with liquor trough with guide roll and displacer, • Machine will be completely new. We supply with guarantee. (Photo shows a similar machine after delivery) • New drive can be designed according to case of operation, • extra charges: EUR 22.000 • Guarantee period: 7 months The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

2 x Injection moulding machines Demag 1000 420 310 El Exis S Bj 2003

Holke F-10-V X: 815 - Y: 400 - Z: 420 mm Max longitudinal travel X-axe: 815 mm Max cross-travel Y-axe: 400 mm Max travel Z-axe: 420 mm Power on spindle: 2 HP Admission in millinghead: ISO 40 Max quill travel Z´: 130 mm Spindlespeeds: 57 > 2275 rpm Table size: 1120 x 255 mm Weight: 1300 kg

Key data: 1000 kN, 172 g/PS, 40 mm

Arburg 420C-1000-290 Injection Moulding Machine with sorting flap Number: 239 Availability: in stock Year of production: 2006 Producer: Arburg Screw diameter[mm]:40 Injection weight [g]: 172 Injection pressure [bar]: 1530 Clamping force [kN]: 1000 Gap spacing [mm]: 420 x 420 Plate size [mm]: 570×570 Min. Form Height [mm]: 250 Control Type: Selogica Tongue: German Installed power [kW]: 21.4 Working hours [h]: 95822 Weight [kg]: 3700 Dimensions [mm]: 4400 × 2000 Feed hopper: NO Robot Nest: Yes Core String: Yes

Vertical band saw MÖSSNER REKORD type SM 420Masch. No. 17010 Year of construction 1968Roller diameter 420 mmRadius in width 415 mmRadius in height 265 mmTable size 605 x 600 mmBelt speed 18 - 562 m/min. 8 stepsSaw blade length min/max. 3150 / 3260 mmDrive power 1.1 / 1.7 kWNet connection 380 V 50 Hz- Saw blade speed over 4 gear stages and 2 motor speeds- Saw blade butt welder IDEAL BS 0-16 with scissors and grindstone- swivelling work table in 2

• Clamping Force: 80 tons (800 kN) • Screw Diameter: 35 mm • Shot Weight (PS): 165 grams • Tie Bar Spacing (H × V): 420 mm × 420 mm • Opening Stroke (Max): 450 mm • Minimum Mould Height: 250 mm • Maximum Daylight (Platen Distance): 700 mm • Control System: Selogica • Power Consumption: 29.9 kW • Machine Dimensions (L × W × H): 5,200 mm × 1,600 mm × 2,200 mm • Machine Weight: 3,800 kg

Height=1.85 m, Overall length= 0.96 m, Overall width= 0.94 m, Net weight= 210 kg,

A total of 71 Kroll air heaters are available, 30x LH 130 V10, 1x LH 130 V20, 7x LH 230 V10, 3x LH 330 V10, 1x LH 420 V10, 6x LH 430 V10, 1x LH 430 V20, 11x LH 530 V10 and 11x LH 630 V10. The fans are used and partly have bent fins and scratches. An on-site inspection is possible.

roll diameter: 420 mm throat: 410 mm workpiece height: 295 mm cutting speed: 12 - 375 m/min table surface area: 600 x 600 mm saw band length: 3150-3260 // 3-16 mm work height max.: 1020 mm voltage: 380 V total power requirement: 1.1 / 1.7 kW weight of the machine ca.: 620 kg dimensions of the machine ca.: 1000 x 800 x 1900 mm from a maintenance workshop - good condition () Furnishing: - Butt welder IDEAL BSO / 16 with scissors and whetstone - 4 gear stages + 2 engine speeds - Belt guide height adjustment with handwheel - Working table tiltable +/-45° - Working table tiltable 10° - Machine base Machinevideo : https://www.youtube.com/watch?v=UVpE_bLGHa0 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.