We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,286 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Arburg 420C-1000-250 without hopper, with gas boost Make: ARBURG Type: 420C-1000-250 Built: 1999 Control: Selogica Country of origin: Germany Screw Dia: 35 mm Swept Volume: 144 ccm Shot Weight: 121 g Injection Pressure: 1820 bar Clamping Force: 1000 kN Tie Bar Distance: 420 x 420 mm Platen Size: 570 x 570 mm Mould height min.: 250 mm Opening Stroke: 500 mm Total day-light max: 750 mm Power: 28,5 kW Workinghours: 40702 h Dimensions: 5 x 1,80 m Weight: 3180 kg Equipment Language: German Manual
used
Clamping force [kN] 4200 Dimensions of mounting plates (hxv) [mm] 1310 x 1200 Clearance between columns (hxv) [mm] 800 x 800 min./ max. mold height [mm] 580 - 1600 Maximum opening width [mm] 1020 injection unit Screw diameter [mm] 70 mm Injection volume [cm3] 1047 Injection weight [g] 953 Injection pressure [bar] 1778 Electric-hydraulic equipment Pump motor rated power [kW] 75 Heater power [kW] 30 Dimensions and weight Net weight with control cabinet [t] 22 Dimensions (L x W x H) [m] 6.38 m x 2.33 m x 2.48 m
used
Closing unit Clamping force [kN] 1300 Dimensions of mounting plates (hxv) [mm] 615 x 615 Clearance between columns (hxv) [mm] 420 x 420 Min./max. mold height [mm] min 250 Injection unit Screw diameter [mm] 45 Injection volume [cm3] 286 Injection weight [g] 240 Injection pressure [bar] 2500 Electrical and hydraulic equipment Rated power of the pump motor [kW] 30 Heater power [kW] 13.8 Dimensions and weight Net weight with control cabinet [t] 4.33
used
Krauss Maffei KM 420-3000 CX Clamping/injection matrix Clamping force [kN] 4200 Mounting plate dimensions (hxv) [mm] 1270 x 1230 Clearance between columns (hxv) [mm] 800 x 800 Min./max. mold height [mm] min 580mm Maximum opening width [mm] 1600 Injection unit Screw diameter [mm] 70 Injection volume [cm3] 1232 Shot weight [g] 1121 Injection pressure [bar] 2389 Electro-hydraulic equipment Power rating of the pump motor [kW] 75 Power rating of barrel heating [kW] 29 Dimensions and weight (approximately) Net weight with control cabinet [t] 22,3 Dimensions (L x W x H) [m] 7,32 x 2,49 x 2,38
used
Clamping force [kN] 1000 Dimensions of mounting plates (hxv) [mm] 570 x 570 Clearance between columns (hxv) [mm] 420 x 420 injection unit Screw diameter [mm] 40 Injection volume [cm3] 182 Injection weight [g] 153 Injection pressure [bar] 2120 Dimensions and weight Net weight with control cabinet [t] 3430 Dimensions (L x W x H) [m] 4.35 x 1.64 x 2.08
used
Injection weight: 210g Closing force: 1,300 kN Screw diameter: 45 mm Injection pressure: 1670 bar Column spacing: 420 x 420 mm Plate size: 605 x 605 mm Min mold height: 250 mm Type of control: Selogica German Installed power: 32.2 kW Working hours: 88000 h Weight: 4080 kg Dimensions: 4.5 x 2 meters Hopper: No Core String: Yes Robot nest: Yes with conveyor belt, bimetallic screw
used
Closing unit Clamping force [kN] 800 Dimensions of mounting plates (hxv) [mm] 570 x 570 Clearance between columns (hxv) [mm] 420 x 420 Min./max. mold height [mm] min 250 Maximum opening width [mm] 750 Injection unit Screw diameter [mm] 35 Injection volume [cm3] 144 Injection weight [g] 132 Injection pressure [bar] 1820 Electrical and hydraulic equipment Rated power of the pump motor [kW] 15 Heater power [kW] 8.6 Dimensions and weight Net weight with control cabinet [t] 3.18 Dimensions (length x width x height) [m] 4.2 x 1.7 x 1.8 Additional equipment: Single-phase plastic feeder Picker
used
Injection unit Injection pressure [bar] 1680 Electrical and hydraulic equipment Rated power of the pump motor [kW] 22 Heater power [kW] 8 Dimensions and weight Net weight with control cabinet [t] 4.08 Dimensions (length x width x height) [m] 4.35m x 1.65m x 2.18m Closing unit Clamping force [kN] 1300 Dimensions of mounting plates (hxv) [mm] 605 x 605 Clearance between columns (hxv) [mm] 420 x 420 Min./max. mold height [mm] min 250 Maximum opening width [mm] 750 Injection unit Screw diameter [mm] 45 Injection volume [cm3] 230 Injection weight [g] 194 Additional equipment: Single-phase plastic feeder Picker
used
Injection weight: 131 g Closing force: 1,000 kN State: Used Screw diameter: 35 Injection pressure: 2000 Column spacing: 420x420 Size of plates: 570x570 Min mold height: 250 Control type: Selogica Tongue: German Installed power: 46 Working hours: 87.026 Libra: 3740 Dimensions: 4.4 x 2 Core String: Yes Robot socket: Yes Air valve: Yes
used
Closing unit Clamping force [kN] 4200 Dimensions of mounting plates (hxv) [mm] 1127x1060 Clearance between columns (hxv) [mm] 713 x 713 Min./max. mold height [mm] 400-750 Maximum opening width [mm] 1450 Injection unit Screw diameter [mm] 62 Injection volume [cm3] 749 Injection weight [g] 719 Injection pressure [bar] 2296 Dimensions and weight Net weight with control cabinet [t] 27 Dimensions (L x W x H) [m] 7.825 x 2.15 x 2.599
used
Closing unit Clamping force [kN] 4200 Dimensions of mounting plates (hxv) [mm] 1200 x 1100 Clearance between columns (hxv) [mm] 870 x 710 Min./max. mold height [mm] 380/820 Maximum opening width [mm] 1530 Injection unit Screw diameter [mm] 60 Injection volume [cm3] 763 Injection weight [g] 690 Injection pressure [bar] 1905 Electrical and hydraulic equipment Rated power of the pump motor [kW] 45 Heater power [kW] 23 Dimensions and weight Net weight with control cabinet [t] 20 Dimensions (length x width x height) [m] 7.9 x 2.2 x 2.5
used
I would like to sell this machine, because we have a different profile and we will never use it. The process factory was closed right after the pre owner bought this machine and it had been closed until I bought this factory last year. Only the trying period was run trough. If you see the pictures you can see a roll of wrapping foil on the machine. It is the trying foil. There are two support stands behind the thermoformer full of with packaging forms. Before you buy it I will make a full service on this machine with GEA company and i will give you the certification from it. Guarantee! The price is including 6 different moulding form (the original price is about 15.000 €/piece) If you have any questions please ask me Technical description: - forming with preheater - forming via compressed air and vacuum - flexible and rigid bottom and flexible top film - max. forming dep ...
used
With the Bucher press, you can automatically link the 4 phases of a complete cycle: filling, pressing, emptying, washing. • 25% greater efficiency • Personnel gain • Mastery of your process. The press adds to the important drainage function, particularly useful for fresh, pumped over, crushed, destemmed (vintage) grapes... In addition, they are equipped with automatic filling: only one loading point and automatic division of the grapes in the cage . With fresh, crushed or destemmed grapes, more than 75% must can be obtained with just the filling action. They mainly consist of a slightly inclined cylindrical cage (made of laminated polyester resin and fiberglass), in which two plates move on a central screw. Depending on the direction of cage rotation, the plates move closer (compression) or move apart (decompression). Depending on the type of grape, 3 or 6 compressions will be p ...
used
Engine Brand: VOLVO, Conditie: CORE, Nominal Power @ Nominal Rpm: 309 Kw, Bore: 131 mm, Qty Cylinders: 6 Qty, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Green , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: No Starter Present , Rated Power: 309 Kw, Rated Speed: 1800 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/catalog/product/view/id/273191, , = More information =, , Type: Engine, Type number: D12A 420; Transport weight [kg]: 1140
used
Producer ARBURG Type 420C-1000-250 Year 2002 Clamping unit Clamping force 100 ton Opening stroke 575 mm Distance between tie bars 420 x 420 mm Mould height min. 250 mm Opening width 750 mm Platen size (h x v) 570 x 570 mm Injection unit Screw diameter 25 mm Injection volume 60 cm³ Shot weight 54 g Injection pressure 2800 bar Measurements and weight Dimensions 4,3 x 1,65 x 2,1 m Machine weight 3130 kg Robot Producer Hahn Type LR 16 K700 System Petrischale Year 2000
used
Producer Arburg Type 420 S 1000-150 Year 2000 Clamping unit Clamping force 100 ton Opening stroke 575 mm Distance between tie bars 420 x 420 mm Mould height min. 250 mm Opening width 750 mm Platen size (h x v) 570 x 570 mm Injection unit Screw diameter 35 mm Injection volume 144 cm³ Shot weight 126 g Injection pressure 1820 bar Measurements and weight Dimensions 4,3 x 1,65 x 2,1 m Machine weight 4950 kg Additional Information: There are 3 screw in the machine. 30-35-40mm one on the machine others screw will be delivered on a pallet
used
Producer DEMAG Type 60/420-200 NC5 Year 2006 Clamping unit Clamping force 60 ton Opening stroke 600 mm Distance between tie bars 420 x 420 mm Mould height min. 200 mm Opening width 750 mm Platen size (h x v) 600 x 600 mm Injection unit Screw diameter 25 mm Injection volume 61 cm³ Shot weight 54 g Injection pressure 2752 bar Measurements and weight Dimensions 4,1 x 1,4 x 4,2 m Machine weight 3950 kg The machine received a new cylinder and a new screw in December 2022
used
Semi-automatic wire comb binding machine ( wire -O ) RENZ AUTOBIND 420 for books and calendars with hanging system KAS 200 built in 1997 Serial No.: 7108 Spiral length from 60-420 mm Speed max. 1800 cycles/h. including tools 3/16", 1/4", 5/16", 3/8", 7/16", 5/8" and 7/8".
used
Manufacturer: CFS (GEA) Type: Compact 420 YOM: 2010 El. specs: 28 kW, 42 A, 400 V, 50 Hz Labelling machine: Manufacturer: CFS Type: TiroLabe TL-150 YOM: 2010 includes 4 format sets Vacuum Pump: BUSCH R5 Includes ESPERA outfeed conveyor Condition: very good
used
saw blade diameter: 420 mm capacity 90 degrees: round: 130 mm capacity 90 degrees: flat: 160 x 100 mm capacity 45 degrees: round: 110 mm capacity 45 degrees: square: 130 x 80 mm turning speeds: 3000 U/min engine output: 2,0 kW total power requirement: 2,0 kW weight of the machine ca.: 190 Kg dimensions: 3,0 x 1,0 x 1,3 m Underfloor aluminum circular saw - Hydropneumatic semi-automatic - pneum. Workpiece clamping device - Roller conveyor with material stop - Machine feet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Screw diameter: 40 mm Injectable volume: 182 mm Injection pressure: 2120 mm Passage between columns: 420 x 420 mm Opening stroke: 500 mm Core: 1 Blower: Robot Interface
used
Description: serial no.: 0020 operating voltage: 230 V frequency: 50/60 Hz , power: 1000 VA , pneumatic: 4 – 6 bar , suitable for tool holders SK 40/SK 50 , Approx. Onsite Dimension. (l x w x h): 1,500 x 900 x 1,800 mm, weight approx.: 800 kg
used
serial number: 0493373 ampere: 420 A water cooling unit: kW total power requirement: kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Inv. Num. : 7418 Type: Concept 420/810-2300 Producer: Demag Created: 2006 Parameters: Clamping force: 420 t Screw diameter: 60 mm Injection capacity: 891 cm³ Injection mass: 800 g Height of the clamping plate: 1200 mm Width of clamping plate: 1100 mm Distance between uprights (horizontal): 800 mm Distance between uprights (vertical): 710 mm Maximum spraying pressure: 2420 bar Machine length: 7900 mm Machine width: 2200 mm Machine height: 2500 mm Injection weight: 20000 kg
used
Injection weight: 17 g Injection weight (second unit): 65 Closing force: 1,000 kN Screw diameter: 18/30 Injection pressure: 2500/2210 Column spacing: 420x420 mm Size of plates: 570x570 Min mold height: 250 Control type: Selogica Tongue: German Installed power: 34.5 Working hours: 61792 Libra: 4000 Dimensions: 4.6x1.8 Feed hopper: NO Core String: Yes Air valve: Yes Heating control for molds: Yes
used
Injection unit Screw diameter: 80 mm Calculated injection volume: 1608 cm3 Length/diameter ratio: 27 L/D Pressure on the material: 2400 bars Closing unit Closing force: 5000 kN Opening stroke: 901 mm Minimum mold thickness: 600 mm Passage between columns: 1020 x 920 mm General Heating power: 132 kW Other Equipment : Commissioned: 2010 Number of hours: 7000 h Tonnage: 500
used
The Tonello G1 420 MW2 is an advanced washing machine specially designed for industry to efficiently wash and treat textiles and clothing. This offers a generous capacity to process a large amount of textiles and clothing in one wash. This washing machine is suitable for a variety of washing and treatment methods, including washing, bleaching, dyeing, enzyme treatments and much more. It can handle a wide range of materials and clothing types. The Tonello is designed to minimise operating costs while ensuring high washing and treatment efficiency. Ice can be achieved through the use of advanced technologies for water recovery, energy conservation, and automated operations. easy handling and quick commissioning. Clear control panel and clear instructions make it easy to operate and maintain the device.
used
Ref. no.: 18239 Hersteller: ARBURG Year of construction: 2000 Clamping unit Clamping force: 100 ton Opening stroke: 575 mm Distance between tie bars: 420 x 420 mm Mould height min.: 250 mm Opening width: 750 mm Platen size (h x v): 570 x 570 mm Injection unit Screw diameter: 35 mm Injection volume: 144 cm³ Shot weight: 126 g Injection pressure: 1820 bar Measurements and weight Dimensions: 4,3 x 1,65 x 2,1 m Machine weight: 4950 kg Further information: There are 3 screw in the machine. 25-30-35 mm one on the machine others screw will be delivered on a pallet
used
Ref. no.: 18383 Hersteller: DEMAG Year of construction: 2008 Clamping unit Clamping force: 420 ton Opening stroke: 770 mm Distance between tie bars: 820 X 820 mm Mould height min.: 380 mm Mould height max.: 825 mm Platen size (h x v): 1200 X 1100 mm Injection unit Screw diameter: 60 mm Injection volume: 890 cm³ Shot weight: 810 g Injection pressure: 2420 bar Measurements and weight Dimensions: 8,2 X 2,2 X 2,4 m Machine weight: 22300 kg Additional information & extras Core pull: 4 pcs Robot Producer: Remak Year: 2008
used
Key data: 100000 kN, 149 g/PS, 35 mm
Clamping force: 100 t Year of construction: 2001 Injection weight in PS: 149 g Control Type: NC4 Injection unit: .../310 Screw diameter: 35 mm Spec. Injection pressure: 2020 bar Spray volume: 168.3 cc Injection weight in PS: 149 g Hydr. Drive power: 18.5 kW Cylinder heating capacity: 9.4 kW L/D screw ratio: 20 Clamping unit: 100/... Clamping force:: 100 t Size of clamping plates: 600 x 600 mm Lights spar spacing: 420 x 420 mm Ejector force: 41.2 kN Tool installation height: 250 mm Aperture travel: 500 mm Max. plate spacing: 750 mm Ejector travel: 150 mm General information: Fuel tank capacity OIL: 220 l Weight: 4800 kg Dimensions(m) LxWxH: 4.3 x 1.4 x 2.0 m Equipment: 1 x Hydraulic Core 1 x Pneumatic Valve
used
Key data: 130000 kN, 194 g/PS, 45 mm
Clamping force: 130 t Year of construction: 1999 Injection weight in hp: 194 (hp) g Control type: Selogica Injection unit: .../350 Screw diameter: 45 mm Spec. Injection pressure: 1670 bar Spraying volume: 230 ccm Injection weight in hp: 194 (hp) g Hydr. Drive power: 22 kW L/D Screw Ratio: 18 Clamping unit: 1300/... Clamping force:: 130 t Size of clamping plates: 615 x 615 mm Lights spar spacing: 420 x 420 mm Ejector force: 40 kN Tool installation height: 250 mm Aperture travel: 500 mm Max. plate spacing: 750 mm Ejector travel: 175 mm General information: Fuel tank capacity OIL: 240 l Weight: 4100 kg Dimensions(m) LxWxH: 4.4 x 1.4 x 2.1 m
used
Description: Closing unit: , closing force 1000 kN, ,random force 50 kN Opening stroke 500 mm Mold mounting height 250 mm Distance between the clamping platens 750 mm Light column spacing 420 x 420 mm Ejector force 40 kN, ejector stroke ,175 mm Injection unit: screw diameter 35 mm, effective screw length 20 l/d, screw stroke 150 mm Stroke volume 144 cm³ Injection part weight 132 g Injection pressure 1820 bar Approx. Onsite Dimension. (l x w x h): 4,600 x 1,600 x 2,000 mm, weight approx.: 3,200 kg
new
: neu : ca. 10 Wochen ab Auftrags : Italien : 11070 € : 226.94 € : Schwenkrahmen : 3270x27x0,9 mm : 35/70 m/min : 280 mm : 240 mm : 420x200 mm : rund 260 mm, quadrat 240 : rund 170 mm, quadrat 160 : rund 200 mm, quadrat 180 : 830 mm : 1600 mm : 1400 mm : 1800 mm : 438 kg manual vice with lever for quick clamping gravity downfeed with adjustable damper 2 speeds coolant equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: neu : ca. 10 Wochen ab Auftrags : Italien : 11640 € : 238.62 € : Schwenkrahmen : 3270x27x0,9 mm : 35/70 m/min : 300 mm : 240 mm : 420x200 mm : rund 240 mm, quadrat 230 : rund 170 mm, quadrat 170 : 830 mm : 1650 mm : 1200 mm : 1900 mm : 400 kg hydraulicvice saw beam moves up and down by hydraulic cylinder fast descent automatic fast up/down conrolled by feeler pin adjustable pressure according to section and type of material double safety buton for cycle start 2 speeds coolant equipment _CUTTING CYCLE_ Vice locking, Quick bow pull-down hydraulically operated, Blade rotation and cooling liquid start-up, Working pull-down, end of the cutting cycle, Stop of blade rotation and supply of cooling liquid, Quick bow lift-up, Stop of bow upwards movement, vice unlocking if selected. Optional equipmente: adjustable vice pressure EUR 330,-- The data for this ad was created with ModulMWS - t ...
new
: neu : ca. 10 Wochen ab Auftrags : Italien : 9080 € : 187.96 € : Schwenkrahmen : 3270x27x0,9 mm : 35/70 m/min : 300 mm : 240 mm : 420x200 mm : rund 240 mm, quadrat 230 : rund 170 mm, quadrat 170 : 830 mm : 1600 mm : 1400 mm : 1950 mm : 356 kg manual vice with lever for quick clamping gravity downfeed with adjustable damper 2 speeds coolant equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Key data: 4200 mm, 750 mm, 698 mm
Control: Heidenhain iTNC530 Travel: X-axis V/H 4,200 / 3,630 mm Y-axis 750 mm Z-axis V/H 695 / 800 mm Pendulum operation: 2 x 1,830 mm Total clamping surface 4,680 x 750 mm T-slots 7 pieces Table load: approx. 4,000 kg Integrated rotary table Ø 750 mm Interference circle diameter 1,100 mm Workpiece weight approx. 800 kg Mounting: SK 40 Tool magazine: 50 compartments Spindle speed: 50 - 12,000 rpm Equipment - Formingstar feed motor with Cyclus 320 (vario Dynamic) - Internal cooling (IKZ) 25 bar - Inclined bed coolant system SKM 900 -Conveyor - 3D probe M&H - Handwheel Heidenhain HR 410
used
Key data: 324 mm, 600 mm
CNC lathe GILDEMEISTER CTX 420 linear V 3 With control Heidenhain ELTROPILOT 4290 Year of construction: 2003 Max. rotatable diameter: 324 mm Max. rotatable length: 600 mm Max. circulation diameter: 680 mm Spindle bore: 79 mm Max. spindle speed: 4500 rpm With the following accessories: Slide protection with interior lighting 12-speed turret with 12 driven stations 50 tool holders VDI 40 5 driven tools VDI 40 1 pc Hydraulic Lynette Tailstock with quill Conveyor Hydraulic jaw chuck Forkardt 0 250 mm Foot switch for jaw chuck + tailstock adjustment Coolant device 210 l ( 20 l/min ) 6 bar Operating instructions
used
Description: Saw blade diameter: 275 mm Cutting area (flat): 140 x 70 mm Cutting area (miter): 100 x 70 mm weight approx.: 268 kg, Approx. Onsite Dimension. (l x w x h): 800 x 700 x 1,500 mm
used
This DEMAG Concept 420/810-2300 Injection moulding machine was manufactured in the year 2006 in Germany. It is equipped with a Ergo control unit. The machine has a screw diameter of 60 mm, a stroke volume of 891 cm³, a injection pressure of 2420 bar, a shot weight of 800 g/PS and clamping force of 4200 kN. The distance between bars are 800x710 mm and the size of mould platens 1200x1100 mm.
used
This ARBURG Allrounder 420S 1300-675 Injection Moulding Machine was manufactured in 2004 in Germany. It has a clamping force of 1300 kN and is equipped with a 55mm screw with 2080 bar injection pressure. The open stroke is 575 mm and the mould height is min. 275mm. The machine is controlled by an ARBURG SELOGICA control unit and has operated 53425 hours.
used
This ARBURG Allrounder 420 C 1000 - 290 Golden Edition Injection moulding machine was manufactured in 2022 in Germany. It is equipped with a Servo-controlled injection unit which has clear distance between tie bars of 420mm. This injection moulding machine has a clamping force of 1000 kN and features a plasticizing cylinder set of 30 mm screw diameter (without nozzle) in wear-resistant design for processing thermoplastics with corrosive and/or abrasive components, with a low to medium filler content of glass, talc orTiO2. It is included an ARBURG THERMOLIFT 100-3 and Temperature control unit (HB-Therm Thermo-5 HB-140Z1). In total is has operated 619h automatic, 891h pump and 81567 machine cycles. See shot weight specifications per material, nozzle and cylinder temperature guide values in photo gallery.
used
This DEMAG ERGOTECH 4200-2300 Injection Moulding Machine was built in the year 1995 and has 25000 production hours. It is equipped with a Wittmann handling. The machine has a clamping force of 4200 kN and a screw diameter of 70 mm. It comes with 2 core pullers.
used
This used injection moulding machine was manufactured in 1999. An ARBURG 420C-1000-250, its designed for precision and efficiency in production. Ideal for a wide range of plastic moulding applications, this machine offers exceptional precision and ease of use. This particular machine represents a valuable addition to any production line. Consider the ARBURG 420C-1000-250 machine we have for sale as a strategic investment in your manufacturing capabilities. For further information, please contact us.
used
This used injection moulding machine was manufactured in 2001 by ARBURG, a leader in the industry. The model 420 C 1000-250 features a clamping force of 1000 kN and weighs 3180 kg, tailored for precision and reliability in production. Notably, it includes handling for enhanced efficiency, making it an excellent addition to any production line. The ARBURG 420 C 1000-250 machine we have for sale stands as a testament to ARBURGs engineering excellence and durability. For further information, please contact us.
used
Code: 0259 Brand: HOLZHER Model: TRIATHLON 1425-420V - CE Standard Edge bander with grinding unit for wood, pvc, veneer, abs, melamine, solid wood, formica, solid wood and various - CE Standard Technical data: Edge thickness min/max mm 0,4/25 Panel height mm 60 Glue in cartridges Composition: Grinding unit for panel grinding - N° 2 cutters with adjustable infeed - Suction diameter mm 120 Gluing Unit with cartridge - Cartridge loader - N° 3 pressure rollers End cutting unit with 2 motors - Rpm 12000 Tilting trimming unit Tilting bevelling unit Edge Scraping Unit Rounding UnitAutomatic revolving Spindle Unit - Motor Kw 3,8 - Rpm 12000 Oscillating Brush Unit - Brush diameter mm 150 Hanging control panel Protection cabin Removable support roller conveyor Compressed air 6-7 atm Overall dimensions mm 7500 x 1000 x 1750 h Weight kg 3500 MACHINE NOT RECONDITIO ...
used
Engel Injection Moulding Machine e-Cap 3440/420 T. Consider this machine had a new list of 447k in 2013 – see attached. Today new price is around 650k. Working hours is only 18384. Machine from 2012 and still in production Clamp force to/ kN 420/4200 Opening force kN 420 Opening stroke mm 700 Mold height max. mm 750 Mold height min. mm 350 Mould fixing platens h x v mm 1350 x 1350 Tie bar distance hor. x vert. mm 920 x 920 Ejector stroke mm 220 Ejector force forward / return kN 120 mold weight, max on moving platen/center of gravity1 kg/mm 6200 / 315 Dry operation time sec @ imm 2.1 @ 600
used
Clamping force [kN] 4200 Dimensions of mounting plates (hxv) [mm] 1270x1230 Clearance between columns (hxv) [mm] 800x800 Min./max. mold height [mm] min 380 Maximum opening width [mm] 1400 Injection unit Screw diameter [mm] 60 Injection volume [cm3] 792 Injection weight [g] 720 Injection pressure [bar] 2420 Electrical and hydraulic equipment Rated power of the pump motor [kW] 75 Heater power [kW] 29
used
- Control SIEMENS Sinumerik 802 S/C - Manual movement of axes X and Z via 2 electronic handwheels - User-oriented cycle interface for easy part programming - Turning cycles can be extensively programmed to form a complete range of parts - Induction-hardened and ground bed guide tracks - Highly dynamic main spindle drive thanks to servo technology - Equipped with hydraulic 200 mm chuck with adjustable clamping force - Low-maintenance operation of the machine thanks to intelligent central lubrication unit - Longitudinal and transverse movements are carried out via high-quality ball screws - 8-fold tool turret Specifications: Workpiece length 750 mm, Turning diameter over bed 420 mm, Turning diameter over support 230 mm, X-axis travel 220 mm, Z-axis travel 750 mm, Turning length (max.) 500 mm, Spindle speed 3,000 min-1 Spindle holder A2-6 Spindle bore 52 mm. Bmfomb7i3r ...
used
Key data: 4200 kN
Demag Ergotech Concept 420/810-2300 with the Sepro Success 33 robot Year of construction: 2006 Injection unit: Screw diameter: 60 mm Spray weight: 800 g Injection pressure: 2420 bar Dosing volume: 891 ccm Clamping unit: Clamping force: 420 t Tie bar spacing: 800x710 mm Size of clamping plates: 1200x1100 mm Ejector: hydraulic Clamping unit: toggle lever Control: NC 4 Additional equipment: Machine in very good technical condition Euromap 67 Robot Interface Air Valve x 4 Hydraulic, needle core pull, controlled by a proportional valve - from the side of the movable plate x 2 Hydraulic, needle core pull, controlled by a proportional valve - from the side of the fixed plate x 2 Hot runner control x 18 Injection unit hardened - Bimetal Central lubrication Parallel Movements Built-in print quality control system from Sensor Kistler - tool pressure measurement ...
used
Key data: 800 kN
Demag Ergotech Compact 800/420-200 Year of construction: 2000 Injection unit: Screw diameter: 30 mm Spray weight: 94 g Injection pressure: 1990 bar Dosing volume: 106 ccm Clamping unit: Clamping force: 80 t Tie bar spacing: 400x400 mm Size of clamping plates: 580x590 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Machine in very good technical condition Euromap 12 Robot Interface Air valve x 1 Hydraulic core pull x 1 Injection unit hardened - Bimetal Machine was not in use in an ongoing production. This was only used to test the tools It is possible to change the screw diameter Metrics: Weight: 4000 kg Length/Width/Height: 3.90x1.40x1.90 m Drive: Pumps/motor: 18.5 kW Heating capacity: 7.5 kW Total power: 26 kW All offered machines are started by our service technicians before they are sold. It is possible to ...