japan used for sale

General SKU069C433 LocationBarneveld MakeDalton Corp. Japan Type5-DMV No.0211 Year of constructionunknown Pressure Working pressure0 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume3 Ltr. Specified Features - Planetary mixer Planetary mixer(1x) 1 Mixing/kneading shaftcheck With scrapercheck Motorcheck With covercheck With pan(1x) Capacity3,0 Ltr (useful) Pan sizesdia. 200x150mm With jacketcheck With electric heatingcheck With manual operated liftingcheck MaterialStainless steel Information With switchcheck Floor space0,7x0,6 M Total height1,0 M Weight150 KGPlanetary mixersDalton JapanMixers > Planetary mixersBrand > Dalton Japan What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, ...

Nakata Zoki Kobe, Japan (Troester design) Duplex Extruder Unit Dual 150mm dia PIN Type Extruders, Year of manufacture: 1990, with Roller Feed, and duplex Die. L/D ratio 16:1 Number of Pins: 10 Rows x 8 Pieces, Spare Pins included. Screw Speed 45 r.p.m. Motors 185kw D.C. variable speed, 415 volt, 3ph, 50hz. Full Books and Drawings available. Thyristor Drives included. Starter and Control Panel for Lower Extruder only. Die usable Width 18\\, In good condition.

more tech. Details on request

Qty. 1 Second-hand continuous galvanising line Mfc.: Koryo SanGi, WMS Co., Sumitomo, Dongyang GiGong, Myungshin Mach., Kanto TK, Hitachi, Yuyoung Industry, Cosmo Gas, Hankuk Yugong, Jungwon Mach., Bugong Ind., Hanhyung Industry, SeunJin Mach., Cheongsong Electrics, Jungbu Civil Gas, HK. ENG, Cosmo Construction, KyungJin Construction, Cheonsu Hwankyung Ind., Shinhyeung Built: 1983 Some revamp in 2005 Material: Cold Rolled mild steel FH Strip Width: 650 - 1.250 mm Thickness: 0.2 -1.6 mm Capacity: REF: 27 Ton / Zn 1.2 Ton = 1 Hour HMI Main Control Operation system Zn Coating Wf 80 gm – 220 gm (Both Side) Coil Out Diameter: 2.050 mm Line Speed Max: 150 m/min Entry Section: 195 m/min Process Section: Max. 150 m/min Exit Speed Max.: 195 m/min

We can offer 12 sets of Barmag winders,manufactured in 2022, model:Manta ACW6T 1500/16,16 ends,chuck length:1500mm.Never used,still in packing. Seious buyer contact us please. We have many brands and models machines, tell me what you need seriously!

It is a stereo receiver with integrated amplifier, radio and tape deck! For sale is a very well-preserved and fully functional Panasonic RA-6507 stereo receiver in a noble wooden housing. The device dates back to the 1970s and is a real collector's item with excellent, warm analog sound Equipment & connections: • FM/AM radio with internal and external antenna options • Phono input (optionally magnetic or ceramic) – ideal for turntables • AUX-IN for modern players (e.g. Bluetooth adapter, CD player, mobile phone) • Tape IN/OUT, Rec Out, Monitor Switching • 2 speaker zones (A + B), switchable • Voltage selector (110 V – 240 V) • Made by Matsushita Electric – Japanese quality Auction-ID: A7-46327-111

Good condition Auction-ID: A7-46327-91

Format range: Box length: 80-535 mm Box width: 50-400 mm Equipment: motorized right turn / back dust margin, laser counter, speed infinitely adjustable via potentiometer. Packing scheme: 1–4 rows / layers, results in 16 possibilities. Overhaul 2025: cleaned, checked, painted, new belts. Machine can be viewed by appointment while running.

The laser WUXI CHEERON QY-LC1500-2540 FIBER was produced in 2020 by the brand Wuxi Cheeron Qingyuan Laser Technology Co. The machine is new, it was only included for a test run after the purchase. The machine uses an IPG Photonics (Germany) laser source. The 3-axis fiber optic laser cutter has a power of 1500 W and a large working area of ​​4000 x 2500 mm. The modern design of the laser guarantees many processing possibilities, thanks to the fact that it is equipped with two automatic sheet metal loading tables, a cutting chamber, a large LCD screen, and extensive equipment. Laser technical parameters: - two automatic feeding tables: 4000 x 2500 mm - cutting working surface: 4000 x 2500 mm - closed, illuminated cutting chamber, with strong gas extraction - HD cameras for viewing in the cutting chamber and external viewing of loading tables - a closed container with a control  ...

Dear Sirs, We are pleased to offer the following Used Open Die Forging Press, manufactured by Kawasaki (Japan), a well-known and reputable Japanese OEM. EQUIPMENT OVERVIEW Equipment: Open Die Forging PressManufacturer: Kawasaki (Japan) Manufacturing Year: 2012 Condition: Used, in production until May 2025 Application: Forging of rings and heavy forged components The press owner supplied forged parts (mainly rings) for power plant applications to leading OEMs such as Mitsubishi, Toshiba, GE, Hitachi, Fuji, etc. TECHNICAL SPECIFICATIONS General Press Capacity: 2,000 ton System Pressure: 30.0 MPa Pulling Capacity: 1,000 kN (100 ton) at 19.5 MPa Number of Cylinders: 3 Main Cylinder Diameter: 796 mm Press Weight: Approx. 130 ton Stroke & Daylight Stroke: 1,500 mm Daylight: 2,300 mm Table Fixed Table Size: 1,650 mm (R.L) × 2,400 mm (F.B)  ...

\" Dial gauges / precision indicators – mixed lot Manufacturer: • Mitutoyo (Japan) • Beetle (Made in Germany) • if necessary further analogue version Quantity: 6 pieces Scope of delivery • 6× dial gauge as shown • Original packaging (partial) • Dial gauge stand / holder (1×) Included dial gauges (summary): 1. Mitutoyo Digital Dial Gauge • Model: ID-C112B • Code: 543-250B • Measuring Range: 0–12.7 mm • Resolution: 0.001 mm • ABSOLUTE System • Made in Japan • Incl. Dial Gauge Stand (Special Mount) 2. Mitutoyo Digital Dial Gauge • Model: ID-C1012B • Code: 543-270B • Measuring Range: 0–12.7 mm • Resolution: 0.01 mm • ABSOLUTE System • Made in Japan 3. Mitutoyo Analog Dial Gauge • Model: 2046S • Measuring range: 0–10 mm • Resolution: 0.01 mm • Made in Japan 4th Beetle analogue dial gauge • Measuring range: ±50 / 0 / ±50 • Resolu ...

\" Item (3x) Digital calipers 1. Digital calipers 0–150 mm ABSOLUTE IP67 Type: Mitutoyo 500-161-20 Model CD-15DCX ABSOLUTE Digimatic calipers with IP67 (Coolant Proof) rating. Industrial version for workshop and production environments. With original box. Specifications: • Measuring range: 0-150 mm • Degree of protection: IP67 • ABSOLUTE measuring system • Battery: SR44 • Made in Japan 2. Digital caliper 0-150 mm ABSOLUTE Type: Mitutoyo 500-626 Model CD-15PP Standard ABSOLUTE Digimatic caliper. With original case. Solid workshop design. Specifications: • Measuring range: 0-150 mm • ABSOLUTE system • Battery: SR44 • Made in Japan 3. Digital caliper 0-300 mm Digimatic Type: Mitutoyo 551-231 Model CDN-P30 Large caliper with 300 mm measuring range. Digimatic version with data interface. Suitable for larger workpieces. Technical data: • Measuring range: 0–300 mm � ...

Very agile machine made in Japan. Even faster than Robodrill for in tooling. MECTRON 3-axis machining centre type MTV E 210 (year 2010) Agile high power machine for fine tooling Made in Japan. It is faster than Robodrill, more tools. X/Y/Z travels 250/250/250 mmpositioning precision 0,003mm repatible +/-0,002mmmax. feed 36m/min @ 1,0g table size 400/300mm, spindle nose 100 - 350mm of tablemax load on table 80kg HSK E 25 spindle, max 30000 UminRigid Tapping 8000/min30x tool changermax tool D30x100 SINUMERIK 840DSL controlmax. program memory 2MBabsolute position detection COMPCAD, Slope processing, Rigid tapping, Circular interpolation, Measuring function, Polar coordinates interpolation, Background editing, Macro, G10, USB, backslash compensation, canned cycleNC Options: Ethernet, 4th axis, cylindrical interpolation, tool life management, 2nd measurement function, position monitoring func ...

Sleeve packer/film band roller for film wrapping of large products or product bundles packed on cardboard trays. Automatic infeed by conveyor and automatic outfeed through shrink tunnel (optional available: SHRINKtunnel-PE-XL). - Technical specifications: OMRON/Japan temperature controller, SICK/Germany sensors, MITSUBISHI/Japan PLC | 380V, 2.2kW | 6.0 Bar / 0.1m?/min | max. speed of the machine in neutral: 20 cycles/min | max. product dimensions (mm): L500xW300xH330 | sealing blade length: 700mm | machine dimensions (mm): L1360xW2720xH1900 | weight (net/gross): 450/530kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from th ...

Name: FANUC Servo Motor Model OM Manufacturer: FANUC (Tokyo, Japan) Type: A06B-06 Country: Japan Short Description: Original FANUC servo motor model OM with integrated encoder.

Offered as a package deal: GS-24 PLUS 200 and GS-24 PLUS SPM machines included. Machine 1 (Has two individual sealing units arranged one behind the other) Model: GPPL-GS-24-Plus-200 Year of Manufacture: 2020 The machine set is capable of producing various pouch types, including: - Three Side Seal Pouches (with/without zipper) - Stand-up Pouches (with/without zipper) - Both Side Gusset Pouches - Shape Pouches (via attachment) - Bottom Film Synchronization & Laminate Roll Conversions Applicable Films - Heat-sealable laminated films: - PET poly, PET MET poly, PET ALU foil poly, paper poly, multi-layer films (e.g., PA/PE) Production Range - Output: Up to 200 shots/min or 35 meters/min - Actual output depends on pouch size, repeat length, and laminate type Product Size Range - Three Side Seal Pouch: - 100–600 mm (W) x 100–400 mm (L), 1–2 line operations - Stand-up Pouch: - Si ...

Name: AC Servo Motor Manufacturer: FANUC (Japan) Type: Model αM9/3000, A06B-0163-B010#0001 Country: Japan Short description: FANUC model αM9/3000 compact AC servo motor with a rated power of 1.8 kW, 3000 rpm, voltage 161 V, 3-phase, with integrated encoder. Typical black housing body with red junction box. Robust design for industrial CNC machines. Used condition, mechanically in order, with visible signs of wear

Name: AC Servo Motor Manufacturer: FANUC (Japan) Type: Model αM6/3000, A06B-0162-B110#0001 Country: Japan Short description: FANUC model αM6/3000 compact AC servo motor with a nominal power of 1.4 kW, 3000 rpm, voltage 144 V, 3-phase, with integrated encoder. Typical black housing body with red junction box. Robust design for industrial CNC machines. Used condition, mechanically in order, with visible signs of wear. Price excludes VAT.

\" Mitutoyo ABSOLUTE Digimatic caliper with digital display. Version with ABS measuring system (no loss of reference when switched on). Condition: Used, good condition. Measuring surfaces clean, rail slightly used with usual signs of use. Display functional (according to visual inspection), no cracks. Item: Digital caliper Manufacturer: Mitutoyo Model / Type: ABSOLUTE Digimatic Code No.: 500-181-20 Measuring range: 0–150 mm Origin: Made in Japan • Measuring range: 0–150 mm • Reading: 0.01 mm • System: ABSOLUTE Digimatic • Functions: On/Off, Zero/ABS • Material: Stainless steel, hardened • Manufacturer: Mitutoyo Corp., Japan \" Auction-ID: A7-46417-151

Manufacturer: Mitutoyo Corp. (Made in Japan) Model / Designation: Digital Caliper Unit • Model No.: CD-30PPX • Code No.: 500-708-11 • Serial No.: 0018553 • Battery: SR44 × 1 Caliper: Mitutoyo CD-30PPX Measuring Range: 0 – 300 mm Resolution: 0.01 mm Measuring System: Mitutoyo ABSOLUTE (IP67, Coolant Proof) Battery: 1 × SR44 (inserted) Country of manufacture: Japan Auction-ID: A7-46417-83

\" Digital depth caliper 0–150 mm IP67 (Coolant Proof) Mitutoyo code no. 571-301-10 Model VDS-15PMXR Mitutoyo Digital Depth Caliper with ABSOLUTE Measuring System. \"Coolant Proof\" version with protection class IP67, making it suitable for use in humid environments or with cooling lubricants. Large, solid support base for secure positioning on workpieces. Digital display with ORIGIN function. Scope of delivery: • Depth caliper • Original plastic case with foam insert • Serial number available • Made in Japan Optically very good used condition. Measuring surfaces and measuring rod clean. • Measuring range: 0 – 150 mm • Measuring system: ABSOLUTE Digimatic • Degree of protection: IP67 (Coolant Proof) • Display: LCD • Function: ORIGIN • Battery: SR44 (1x) • Code no.: 571-301-10 • Model: VDS-15PMXR • Manufacturer: Mitutoyo • Origin: Made in Japan \" Aucti ...

\" Digital caliper 0–150 mm with sliding measuring tips Mitutoyo code no. 573-101-10 Model NTD10-15C Mitutoyo digital caliper with sliding probes. Version with ABSOLUTE Digimatic system and digital display. Ideal for special measuring tasks due to adjustable or movable measuring legs (see label \"with movable measuring tips\"). Scope of delivery: • Caliper • Original plastic case • Serial number available • Made in Japan Used condition with slight optical traces. Measuring surfaces optically clean. • Measuring range: 0 – 150 mm • Measuring system: ABSOLUTE Digimatic • Display: LCD • Functions: ON/OFF, ZERO/ABS, ORIGIN • Battery: SR44 • Code no.: 573-101-10 • Model: NTD10-15C • Manufacturer: Mitutoyo • Origin: Made in Japan \" Auction-ID: A7-46417-278

FOR SALE COMPLETE T/C IHI-BBC VTR 454-32 FOR SALE COMPLETE T/C IHI BBC VTR 454-32 TO WHOM IT MAY CONCERN; WE VE USED COMPLETE IHI BBC VTR 454-32 AT OUR STOCK . PLS FIND SPECIFICATION T/ C AT BELOW. IHI BBC TYPE VTR 454-32 no xi 145203 N mmax 580C t mmax 290 revolutİon 17400RPM 01 1 17 01 2 04 1 13 12 1 10 03 1 16 14 1 00 01 1 00 16 MADE IN JAPAN TURBO CHARGER IS READY TO LOAD ON TRUCK . IZMIR /TURKEY EX STOCK IF YOU VE ANY QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba Best of regards; Aliaga marine services E mail: info@aliagamarine.com PHN/fax: +90 232 618 03 85 Mobile: + 905556084850 ABC.aliagamarine.com TURKEY

Qty. 1 Second-hand foil rolling mill plant Mfc.: World Co. (Japan) Type: 6-Hi – Non reversing mill Built: 2002 Application: Copper foil Width: 400 – 700 mm Coil weight: Max. 5 Ton Thickness Entry: 100 – 200 microns Exit: 5 – 100 microns Speed: 0-400/800 m/min. Thickness X-Ray unit AGC system Variable Crown Control Hydraulic servo equipment Main motor power: 200 kW DC Slitter line Mfc.: IHI Width: 150-700 mm Thickness 5 – 50 microns Degreasing line Mfc.: World Co. Strip width: 700 mm Thickness: 10-50 µm Treatment line Mfc.: Kawasaki Built: 2005 Width: 700 mm Thickness: 10-50 µm

CHIRON MODEL FZ18W MAGNUM 4 axisVertical machining center with rotopallet and double 4th axis20 TOOLSISO 40Toolchange: 2.1 sec Spindle: 20 - 8000 RPM, 18,5k kWX = 625Y = 400Z = 400Rapids 40m/minTable area: 2 x 900 x 470- TSUDAKOMA heavy duty double 4th axis (Japan) 360.000 pos.- original HAWE hydraulic unit - FANUC 0m be inspected under power in our warehouse.Mimu Machine tools Italy

Qty. 1 Second-hand Duplex board paper mill Mfc.: Hasegawa, Yodogawa, Fuyo Japan, Valmet, Finland, Kumsun, Chung Korea Buil: 1984 Width: 3400 mm Speed: 330 m/min. Productivity: 450 ton/day max. 350 ton/day (average) GSM: Max.500 g/m2 -The number of HEAD BOX: 7 sets -Fourdriner type -Dryer: 77 ea (Air type+Electric type)

MORI SEIKI SH-500/40 Horizontal Machining Center was built in Japan in 1999 by MORI SEIKI CO., LTD. The machine is equipped with a numerical control type MORI SEIKI MSC-502. The milling machine has a table size of 500 x 500 mm and processes workpieces weighing up to 500 kg. The travel range of its X, Y, Z axes is 630 x 600 x 650 mm, respectively. The machine spindle rotates at 12,000 revolutions per minute. The milling machine is equipped with a magazine for forty tools with a maximum tool diameter of 150 mm, length 360 mm and a weight of 12 kg. The milling center is offered at a price with different types of holders. Technical parameters of the MORI SEIKI SH-500/40 CNC milling machine - CNC control: MORI SEIKI MSC-502 Travel range: - X axis (table travel length): 630 mm - Y axis (vertical movement of the spindle head): 600 mm - Z axis (cross table movement): 650 mm - distan ...

Second-hand Hybrid forklifter LPG gas and petrol Loading capacity 3,000kg Engine K25 Japan Long forks 1.820mm lifting height 3,000mm solid tyres Colour red Including.: Duplex mast, side shifter, seat belt, rain cover, toolbox, manual

MAZAK CO2 Laser Cutting Machine STX510 MKIII 4kW -made in Japan- ! SOFORT EINSATZBEREIT ! over-recovered, very well-preserved MAZAK laser machine with 4000W Panel size: 3000mm x 1500mm minimum set-up area of 2.9m x 7.3m Puncture sensor Plasma sensor Burning Sensor automatic nozzle change Small parts conveyor belt Ball roller table Fast-punching fully encapsulated machine cover Cast bed, no foundation needed FE: up to 20mm VA: up to 15mm ALMG: up to 10mm Plastic, wood cutable incl. CAD / CAM Software 2020 Version incl. 12 months warranty (within Dtl.) incl. delivery incl. commissioning + training Testing under electricity ready for delivery immediately immediately ready for use =optional with fully automatic loading and unloading MAZAK CELL=

HYDRAULIC PUMPS - 3Nos MAKE: KAWASAKI HEAVY Ind. JAPAN TYPE: BZ732S215LH REGISTERED TYPE: R3041L-2SOL

MAKE:FUKUSHIMA LTD. TYPE:MGA-8B MAX WORKING PR. YEAR:1979 WEIGHT:1150 MFG NO.:29760 JAPAN E SEI NO.

MAKE:FUKUSHIMA LTD. TYPE:MGA-8B MAX WORKING PR. DATE OF MFG:1979 WEIGHT:1150 MFG NO.:29760 JAPAN E SEI NO.

MAKE:FUKUSHIMA LTD. TYPE:MA10B MAX WORKING PR.:30 MFG NO.:29801 DATE OF MFG:1979 WEIGHT:1800 KG FUKOSHIMA LTD. JAPAN T SAITO

GUK Slitting Machine RS 21/760 Technical details: -No double bows, false bows and no risk of mixing! -Insensitive to static charge -approx. 20% cost savings compared to processing batch goods -Automatic control of the cutting position -Synchronous control of the print mark -Installation of code readers additionally possible -Storage in maintenance-free needle and ball bearings -Paper roll on top, single or double roll stand -With and without integrated adhesive table -Drive left or right, with chain or timing belt -Smallest fold 15 mm -With automatic roller changer ARW 21 Specifications: -Min. format: (WxL) 60 mm x 105 mm -Format: (WxL) 210 mm x 315 mm -Roller outer diameter: max. 600 mm -Roll core diameter: Europe 70 mm USA and Japan 76 mm or 152.4 mm or 3 inch or 6 inch -Power: 300/minute, depending on section length -Capacity: For paper roll by. 600 mm, sectio ...

2 x 2.9MW 60Hz NIIGATA 18V22AG Gas Power Plant for sale NIIGATA says that 18V22AG has a high electric thermal efficiency of 40% or more and the 22AG engine produced 30% higher power than a conventional spark ignition gas engine with the micro-pilot compression ignition system. Produced in 2004, this generating sets had been successfully operated about 32,000 hours and had a good condition as seen in the photos and the plant was dismantled and has been well preserved in our factory and ready for immediate delivery. Main Specifications: - Engine Model: 18V22AG x 2 sets - Maker: NIIGATA - Continuous Output: 2880kWe x 900 rpm - Frequency & Voltage: 60Hz & 6600V - Year of Production: 2004 - Running Hours: abt. 32,000 hours - Fuel Oil: Natural Gas - Plant Auxiliary Equipment: 1 set ■ Main Specifications ▣ Gas Engine Maker NIIGATA Model 18V22AG Quantity 2 sets Ye ...

MAKE:FUKUSHIMA LTD. TYPE:MA10C MFG NO.:29807 Max. Working Pressure:30kg/cm2 WEIGHT:1800 KG FUKOSHIMA LTD. JAPAN T SAITO

Key data: 1150 , 650 , 500

Machine details Bearing number 1105-02989 Machine type Machining Center - Vertical Make MAZAK Type VTC 20 B Built in 1996 Control type CNC Warehouse FRANCE Country of origin Japan Delivery time immediately Freight base from stock Technical details Information CNC control MAZATROL M PLUS , 24 X-fold tool changer, coolant device 10000 R/MIN

Machine Details Stock number 1105-03735 Machine type CNC lathe Brand MAZAK Type QT 20 N Year of construction 1995 Control type CNC Control Mazatrol T PLUS Storage location FRANCE Country of origin Japan Delivery time immediately Freight base from site Technical details Turning diameter 440 mm Turning length 451 mm Control Mazatrol T PLUS Turning diameter via bed carriage 300 Tailstock holder MK 4 Quill stroke 130 mm Tailstock displacement 500 mm x-axis 180 mm z-axis 510 mm Spindle bore 62 mm Speed range 12-4500 rpm Total power requirement 40 KVA Machine weight ca. 4,2 t Information WITH MAZATROL T PLUS Good Macschine All prices plus VAT. VAT.. Changes and errors in the technical details and information reserved.

+ + + Availability / Delivery time / Pre-order + + + --> Planned completion date for the first devices is March / April 2023 (+/-) (Provided that there are no unforeseeable delays or supply bottlenecks in between) --> A pre-order can already be placed - - - - - price outside EU: 9.900,- € gross price: €11,781 - - - - - Kubota emergency generator set 17 kVA + + NEW - Year of construction 2023 + + - - - - - Engine: - Kubota (Japan) - Model: D1703 - 3 cylinders -Diesel -Water-cooled - 1500 rpm - - - - - Generator: - Manufacturer: Leroy & Somer (France) - 15 / 17 kVA - 230 / 400 volts - 50 Hertz - AVR ESC - - - - - Control / Starter unit: - Digital ComAp starter unit - Hand start at the push of a button - Automatic start function - Generator monitoring: Volt, Ampere, Hertz, kW - Motor monitoring - Operating hours counter - Maintenance  ...

Matsuura MC600VF Vertical Machining Centre in great working condition ready to use. COOLING TROUGH SPINDLE YEAR: 1997 with Yasnaz i80M Control, Table size 870 x 400mm, 20 Position ATC, BT40 Taper, Spindle Chiller, Coolant Tank, X = 600 Y = 410 Z = 470mm, Spindle Speeds 30 – 8000rpm. S/No. 970112285 including Large Qty of BT40 Tooling (33 TOOLS, Universal 3D Tester. Country of Origin: Japan. INCLUDED AS WELL BACK UP PARAMETERS.

Machine Details Stock-No. 1105-03886 Type of machine CNC Lathe Make MAZAK Type QT 20 N Year of manufacture 1998 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Japan Delivery time short-term Freight basis ex works Price Technical details turning diameter 440 mm turning length 451 mm control Mazatrol T PLUS turning diameter over bed slide 300 tailstock taper MT 4 Quill Stroke 130 mm tailstock adjustment 500 mm X-AXIS 180 mm Z-AXIS 510 mm Spindle Bore 62 mm turning speed range 12-4500 rpm total power requirement 40 KVA Weight of the machine approx. 4.2 t Additional information NICE MACHINE WITH BAR FEEDER IEMCA SERCI III

We can offer TMT FDY spinning lines, manufactured by TMT, Japan in 2012, Melt spinning lines,from melt PET inlet to winder.each inlet spuuly 3 beams, each beam has 2 positions, spinneret diameter 100mm, pitch 1400mm, redial blowing quenching, each has 4 hot gidets, 230X450mm, TMT ATi-615/32 winder, twins winder,chuck 1500mm,

Machine Details Warehouse number 1105-03446 Machine type machining center - Horizontal Haas brand Type HCE 400 P Year of construction 2000 Control type CNC Haas control system Storage location FRANCE Country of origin Japan Delivery time by arrangement Freight base EXW (Incoterms 2000) Price Technical details x-displacement 560 mm y-way 635 mm z-path 560 mm Haas control system Pallet size 400x400 mm Table load 400 kg Spindle motor 22 kW Spindle speed 8100 1/min Rapid speed 36 m/min Pallet changer type 2-fold rotation Table indexing 360000° ° Tool magazine: 30 x BT 40 Total power requirement 54 kVA Machine weight approx. 8 t Space requirement approx. 2.8 x 5.5 m Accessories Conveyor Information Still very precise horizontal center full B AXIS 30X BT 40 TOOL CHANGER CNC HAAS 2 PALLETS 400 X 400 MM

Type APT1000 UC Universal panier system suitable for fine and coarse panning (japanese crumbs and corn flakes) complete stainless steel mobile infinitely variable speed with blow-off system with an on-reel roll Track width 1000 mm Dimensions (L x W x H) : ± 2,800 x 1,850 x 2,500 mm

aschinella details Warehouse number 1105-03533 Machine Type Machining Center - Vertical Make MAZAK Type VTC 20 B Year of construction 1996 Control type CNC Storage location FRANCE Country of origin Japan Delivery time immediately Freight base from location Price Technical details x-travel 1120 mm y-travel 510 mm z-travel 510 mm Tool changer 30 compartment Information Control Mazatrol M PLUS 1X 24 COMPARTMENT TOOL CHANGER SPAERNEFOEDERER With CNC control Mazatrol MPLUS , 24-fold tool changer, With CNC control Mazatrol M PLUS , ATC for 24 tools Technical data / technical details: Travel X / X-Travel 1120 mm Travel Y / Y-Travel 510 mm Travel Z / Z-Travel 510 mm Table size 1460x510 mm table load / max. workpiece weight 800 kg Tool shaft / spindle taper SK40 Speed range infinitely variable / spindle speed stepless 40-10000 rpm Number of tool places in ATC ...

MORI SEIKI SH-400 Horizontal Machining Center was manufactured in 2000 in Japan by Mori Seiki CO., LTD. The CNC milling machine is equipped with Mori Seiki MSC-501 numerical control. The price of the machine includes various types of frames. Technical data of the MORI SEIKI SH-400 CNC milling machine - CNC control: MORI SEIKI MSC-501 - machine weight: 10100 kg

Machine Details Warehouse number 1105-03545 Machine Type Machining Center - Vertical Mori SEIKI brand Type MV 40 B Year of construction 1991 Control type CNC Controller (FANUC 16M) MSG M 4 Storage location FRANCE Country of origin Japan Delivery time immediately Freight base from stock HAGUENAU FRANCE Price Technical details x-travel 800 mm y-travel 410 mm z-travel 510 mm Controller (FANUC 16M) MSG M 4 Rapid traverse X-axis 20 m/min Rapid traverse y - direction 20 m/min Rapid traverse Z-axis 15 m/min Table area 1150 x 450 mm Tool holder BT 40 Number of tool holders 30 tool diameter 80 mm tool length 250 mm tool weight 8 kg Speed range 10000 1/min Total power requirement 5.5 / 7.5 kW Machine weight approx. 6 t Information SUPER MACHINE CNC MORI MSG M 4 FANUC 16 WITH 4 AXIS NIKKEN