jacket used for sale

Cooling principle: water cooling (for drying pasty solids), capacity: 4,0 cbm/h, trough length: between 6,7 and 7.9 m, screw diameter: 400 mm, cooling jacket diameter: 560 mm, double-walled, wall thickness trough: 5 mm, helical geared motor 4 kW, conveyor trough coat, cooling shroud, front plates, Auger and Auger blades made of V2A steel

Fluid mixer for tempered mixing with double jacket, 350 l. capacity (net capacity: 100 l. - 280 l.), lateral oulet, pressure proof up to 10 bar, product touched parts in V2A 1.4541; without mixing tools.

Volume: 400 ltr. Material: Stainless steel; --> Mixer equipped with a heating jacket.

MARINE DIESEL ENGINE Reference number 20131 Brand MITSUBISHI Model S12A(N) - MPTK Power 910 HP RPM 1550 RPM Serial number 11245 General condition Running Taken Out Status AVAILABLE SPECIFIC INFORMATION Flywheel housing SAE 0 Flywheel INCLUDED Governor MECHANICAL CONTROL Turbo YES Aspiration Turbocharged / Jacket Water Aftercooled Cooling system 12-cylinder, 4-cycle, water cooled diesel engine, with direct-injection, turbocharger, air-cooler, built-up heat exchanger and sea water pump Starter Electrical Start (24V) Remarks RUNNING ENGINE SPECIFIC FEATURES Panel INCLUDED Expansion tank YES Heat exchanger YES DIMENSIONS LxWxH (cm) 2439mm1482mm1596mm Weight (kg) Net Weight 5000 kg

Two CHRONOS G 100 grain scales on extra sale! With jacket, outlet funnel, performance boost Approx. 30 t / h performance with heavy grain Refurbished, in good condition, see pictures!

Storage tanks/ steel tanks/ water tanks/ water cistern without pressure Volume: 60.000 liter 8 items available! UNI-OFF-FOR B. No. 20-133 A-H GL Steel tanks (wine storage tanks) standing on 4 conical feet and coated with epoxy resin inside Dimensions: Diameter approx. 4.200 mm cyl. Height approx. 3.780 mm Total height with feet approx. 5.100 mm Tanks with dished bottoms Wall thickness: jacket 12 mm, floors 11.5 mm In the middle of the topsoil: 1 block flange DN 50 On the coat: 1 manhole 450 x 350 swiveling 1 flange connector NW 50 2 block flanges NW 20 In the middle of the sub-floor: 1 block flange DN 65 otherwise according to Sketch + photos

Autoclave TANK, Type: 340E -New- The autoclave was only used for 5 cookings at our customer's site. Electric autoclave with 340 litre boiler volume, reinforced quick-release fastener and threaded spindle - Made in Germany For sterilization, pasteurization and preservation. - Completely made of high-quality stainless steel - All safety equipment (latest requirement of the Pressure Vessel Ordinance) - All. Safety equipment, such as safety valve, pressure gauge, overheating protection, steam drain tap, safety outlet tap, etc. - Construction inspection and pressure test by TÜV included - Incl. all required certificates - Fully autom. Control by F-value controller - Fully autom. Control of operating temperature, core temperature, preselection and operating time clock - Content: 340 liters - Double jacket heating via built-in steam generator - Heating type: Electric, 27 kW, ...

The FORNI INDUSTRIALI FIBEX COMBI 6GX-10.130-7110.2E.270 brazing furnace was built by the Italian company Forni Industriali Heat Treating Plants in 2007. The furnace is used for soldering steel elements with solder paste at temperatures up to 1120 degrees Celsius. At the entrance and exit of the furnace, two pairs of gas burners (so-called safety pilots) are installed to prevent the escape of the protective atmosphere outside the furnace. Electric heaters powered by thyristor temperature regulators are responsible for the proper temperature in the furnace. The belt furnace has a conveyor speed adjustment in the range from 0 to 500 mm / min, and the working length of the soldering zone is 7100 mm. The furnace for brazing steel elements was modernized in 2021 - the thermal insulation and the cooling module for sections 1 and 2 were replaced. The cost of the modernization was 70,000 Euro.  ...

Storage Tanks/ Pressure Tanks 16.000 liters horizontal in V2A Tank with vaulted bottoms wallthicknesses: bottoms 11,5 mm, jacket 8 mm material: V2A - AISI 304, 1.4541 On tank crest: - vent pipe NW 40 On the torispeherical bottom: 1 manhole 460 x 360 mm -1 spout DN 50 -1 outlet spout DN 50 otherwise acc. photos Measurements and weight: Diameter: approx. 2400 mm Length of cylinder: 2650 mm Total length: approx. 4000 mm Weight: approx. 2859 kg

Stephan UMHC403E-GNi Pilot Universal Machine with control cabinet Double jacket Steam injection nozzles Knife insert Lid with pressure-resistant closure Feeder containers Steam transfer station Outlet on the boiler electrically driven stirring blade 3 Speeds Machine tiltable Safety device on the lid not functional, machine runs with the lid open Sight glass of the flow meter at the rear of the control cabinet defective Machine should be repainted and overhauled Voltage 400V Fuse: 32A Machine must in any case be thoroughly cleaned before use Video about test run and further pictures available

Description Brand Cleveland Model TKET-6T ID 7296 Status Active Price 1.500 € + VAT Year of manufacture 1999 Location Oradea (RO) Twin steam jacketed tilting kettle, Cleveland TKET-6T manufactured in 1999, made of stainless steel with manual tilting for easy drain, steam jacket filled with treated water that does not require refilling or venting. The temperature control is accurate and consistant with a solid state temperature control (mechanical thermostate are less accurate), Operating temperature range from 145° - 260°F (63°C - 127°C), control panel includes: LED indicator for heat cycle, LED indicator for low water, power ON/OFF switch, adjustable temperature control dial. Rear mounted easy access pressure gauge and pressure relief valve to prevent tampering. Color coded easy to read pressure gauge with "green" and "vent air zone", safety valve for pressures greater ...

Industrial freezer down to -40°C TTS 40-944U Fryka Refrigeration Freezer down to -40°C Tyxp TTS 40-944U Manufacturer Fryka Kältetechnik GmbH LED temperature display Electronic control ST100 (membrane keyboard) Alarm equipment Standby switch Current connection 400Volt, 16A Former original price 20.000.-EUR Quote from manufacturer description: "The housing is made entirely of stainless steel sheet. The insulated outer lid is lockable on the handle. In addition to the outer lid with double seal, the interior is closed with PE insertion lids. The lid is fixed to the base housing with folding hinges and is dampened by gas springs when opening and closing. This allows an opening angle of 90°. The insulation between the interior and the housing jacket is made of two-component insulating foam. The evaporator tubes of the chiller are wound around the interior. The inner she ...

Radial drilling machine make VEB Schmölln type BR 40x1250Machine -No: 62/63, built in 1963Technical specifications:Drilling capacity in ST 60- 45 mmDrilling capacity in GGL 20: 60 mmSpindle mount: MK 5Extension of column jacket spindle axis: 300 - 1250 mmDrilling radius: 450 - 1400 mmDrilling depth: 355 mmClamping surface: 1450 x 920 mmDrilling spindle - base plate: 375 x 1375 mmHeight adjustment of the boom: 750 mmLateral displacement of the headstock: 950 mmDrilling spindle speeds: 20 - 1200 rpm.Feed range: 0.063 - 0.63 mm / revConnected load of the machine: 5.2 kWSpace requirement: 2050 x 930 x 3200 mmWeight approx: 3000 kgWith- Cube tableused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always availa ...

Used mixer type V, capacity approx. 2.100 liters. Equipped with a heating jacket.

1 of used single-infusion brewery, make DME, capacity 32 HL / 20 BBL. RECENTLY Decommissioned – EXCELLENT condition! Brewhouse Single infusion temperature Mash Vessel with Grist Hydrator, Gas fired kettle and separate whirlpool vessel suitable for whole hops and pellets Grain Handling Floor mounted Grist case with flexible grain elevator leading to Grist hydrator Hot Liquor tank 10,000 litre vertical cylindrical vessel with stainless steel shell, shallow cone top and base. 2 x 18kW electric heating element, temperature pocket. 1.5 inch Tri Clamp outlet, Round Top Manway, all in T304. Free standing on stainless steel legs and feet . Insulated on the shell, clad in fully welded stainless steel 2.160,00 mm Diameter x 4.290,00 mm high Cold liquor tank Size and specification as per the above HLT but with a suitably sized external chilling panels Liquor Blending System Te ...

on behalf of the customer order for sale: Lödige Pflugscharmischer Volume 1,000 l Material: Normal steel Double jacket for heating or cooling Mounting frame

No.: 0280 IKA works Cincinnati, Ohio Power: 7.5 kW Housing coolable, double jacket Switchgear 60 Hz movable Dimensions LWH: 1100 x 400 x 1000 mm Weight: approx. 150 kg

Y.O.M.: 1980 No.: 10027 Usable volume: 150 l Pressure double jacket: +1 bar Vacuum pump Pressure gauge, temp gauge Scraper agitator, three-way valve 3 intake ducts Lid to be opened via lifting pull Dimensions LWH: 1700 x 1000 x 2100 mm Weight: approx. 500 kg Products: e.g. mayonnaise, sauces, ketchup, cosmetics, creams etc.

Y.O.M.: 1999 No.: 900/1 Scraper and Homo speed-controlled Vertical stroke, double jacket, swivel Temperature gauge, Vacuum, Ystral-Turrax Temperature control device GWK Type teco CS 90 Y.O.M.: 2002 Heating capacity: 9 kW Cooling capacity 23 kW, temperature maximum 95°C Dimensions LWH: 1200 x 800 x 1000 mm Weight: approx. 100 kg

Machine No.: M 15805 Y.O.M.: 1992 Pressure working space: 1 bar Pressure double jacket: 6 bar Inline version horizontal Product Connections Triclamp very good condition LWH: 400 x 260 x 240 mm Weight: approx. 30 kg

Greerco High Shear Division, USA No. 3-23422 Power: 7.5 kW, ABB with funnel, circulation line, three-way valve on a stable mobile stainless steel frame Machine as good as new, unused Dimensions LWH: 700 x 700 x 1700 mm with double jacket for heating and cooling Weight: approx. 180 kg

Gross volume approx. 18 litres, net volume approx. 12 litres Mixer shaft heatable and coolable Double jacket heatable and coolable Product-contacted parts: stainless steel VA Drive is carried out by chain drive and gearmotor Subject to prior sale - Errors possible

Ideal for passage driving with consistent efficiency and for achieving the narrowest grain size distributions in the micrometer range, Maximum operational safety: even the basic version is designed in accordance with the explosion protection directive for installation in ATEX Zone 1 (ExII 2 G cb IIB T3) Grinding media sizes from 0.5–2.5 mm diameter Ideal cooling properties: The forced routing of the cooling water in the outer jacket allows the processing of temperature-sensitive productsEasy handling – each DYNO-MILL® KD can be dismantled in just a few simple steps Easy operation and adjustment of operating parameters Easy handling – any DYNO-MILL® KD can be dismantled in just a few simple steps Easy operation and adjustment of operating parameters Grinding tank: 5L Power : 12,5kW Voltage : 380V Weight : 450kg

No.: L13457 Y.O.M.: 1990 Pressure working space: 4 bar Pressure double jacket: 4 bar Double-acting mechanical seal Locking pressure station speed-controlled scraper Condition good various spare parts: seals, mechanical seals Dimensions LWH: 1100 x 900 x 1750 mm Weight: approx. 900 kg

EUROLUX ZKG Tanks/ Storage Tanks / Pressure Tanks/ Beer Tanks with cone floor with cooling jacket made of V2A Max operating pressure: 0.99 bar, test pressure: 1.5 bar Content: from 200 litres to 1,000 litres Kat No. 20-00071-1L 200 litres 20-00071-2L 300 litres 20-00071-3L 400 litres 20-00071-4L 500 litres 20-00071-5L 625 litres 20-00071-6L 750 litres 20-00071-7L 1,000 litres Material: V2A - AISI 304, 1.4301 Surface: outside marbled, inside 2B=IIIC Tank upper body: with manhole lid round Ø 400 mm with 2 x handle with 6 x screws with overpressure valve (on extra charge) with downward drawn filling pipe DN 32 with fermentation connector (with overpressure valve, with manometer) with 2 x thread connection DN 50 with CIP spray head/CIP cleaning (on extra charge) with cap nut DN 50 ball Ø 25 mm with connection for cleaning supply ...

Scraper and homogenizer (Ystral) speed-controlled Vertical stroke, double jacket swiveling with heating and vacuum pump on a mobile cart switchgear, timers, etc. Condition very good Dimensions LWH: 700 x 600 x 1900 mm Weight: approx. 150 kg

Ideal for passage driving with consistent efficiency and for achieving the narrowest grain size distributions in the micrometer range, Maximum operational safety: even the basic version is designed in accordance with the explosion protection directive for installation in ATEX Zone 1 (ExII 2 G cb IIB T3) Grinding media sizes from 0.5–2.5 mm diameter Ideal cooling properties: The forced routing of the cooling water in the outer jacket allows the processing of temperature-sensitive productsEasy handling – each DYNO-MILL® KD can be dismantled in just a few simple steps Easy operation and adjustment of operating parameters Easy handling – any DYNO-MILL® KD can be dismantled in just a few simple steps Easy operation and adjustment of operating parameters Grinding tank : 50 litres Power : 45 kW Voltage : 380 V Weight : 1050kg

Vessel for Melting Manufacturer BINDER 1000 Litres for Cosmetic and Food Stuff used – in very good condition Max.Pressure 3 bar Double Jacket : 6 bar with agitator adjustable speed 160°C temperature resistant Manhole and sight glass with lighting CIP cleaning injection nozzles aso TÜV-certificate available (from 2008)!

Vessel for Melting Manufacturer BINDER 2000 Litres for Cosmetic and Food Stuff used – in very good condition Max.Pressure 3 bar Double Jacket : 6 bar with agitator adjustable speed 160 °C Temperature resistant Manhole and Sight Glass with lighting CIP cleaning injection nozzles aso. TÜV-certificate available (from 2008)!

Processing plant Manufacturer: Koruma Type: Disho A140/200 No.: 4,209 Built: 1988 with user manual no vacuum, no double jacket with control cabinet LWH: 1400 x 850 x 1450 mm

Vessel for Melting Manufacturer BINDER 1.000 Litres for Cosmetic and Food Stuff used – in very good condition no. 174/91, max.Pressure 3 bar Double Jacket : 6 bar with agitator adjustable speed 160°C temperature resistant Manhole and sight glass with lighting CIP cleaning injection nozzles aso TÜV-certificate available!

The following materials are available: Cover Liner Piston Water Jacket Connecting Rod Fuel Pump Any Parts

Vessel for Melting Manufacturer BINDER 1.000 Litres for Cosmetic and Food Stuff used – in very good condition no. 175/91, max.Pressure 3 bar Double Jacket : 6 bar with agitator adjustable speed 160°C temperature resistant Manhole and sight glass with lighting CIP cleaning injection nozzles aso TÜV-certificate available!

Z-mixer,stainless acid proof steel,Winkworth type Z1-30303,double jacket,variable speed.

Z-mixer,stainless steel,Strømmen Universal,double jacket

Farm Dairy Milk and Cream Pasteur Machines were completely overhauled in 2015 and are in very good condition. Included. - Milk pasteurizer GEA 1000 liters/h (continuous pasteurizer 93% heat recovery) incl. pumps, control, Temperature Recording - Homogenizer Spomaz 1000 liters/h - Seithal centrifuge 1000 litres/h - 2x Coolable buffer tanks (whole milk, low-fat milk) - Cream / yoghurt pasteurizer GEA 300 litres/h (continuous pasteurizer) with Electric heating incl. pump control Temperature recording - Homogenizer Spomaz 300 liters/h - Buffer tank 600 liters - 2x yoghurt tank 600 litre double jacket heating and cooling bar - Manual CIP basin - Siemens S7 for controlling the dairy. - various coupling panels, butterfly valves, leakage disc valves, Pipelines, etc... - Large cooling unit for cooling the pasteurizer and storage tank - 3000 litre cooling water  ...

Giusti preparator 75 litres Year of manufacture: 1996 Capacity: 75 litres INNER BAR: Max. PR: ATMOS Min. PR: ATMOS Test pression: water fill Working pression: ATMOS Design temperature: 150 °C JACKET BAR: Max. PR: 3.3 Min. PR: ATMOS Test pression: 5.0 Working pression: 3.0 Design temperature: 150 °C

Ribbin mixer/dryer,stainless steel,for powder/granulate,double jacket,variable speed.

GeneralTurning Center; Control: Control M730UM CharacteristicsMax machining diameter366 mmDimensions (L x W x H)3,84 x 2,36 x 1,80 mDrive power tool spindle7,5/5,3/3,7 kWDrive power main spindle22/11 kWRapid feed X / Z30/30 m/minInput precision of C-axis on Mainspindle0,001 degreeMovements X / Z250/1143 mmRotary tool spindle speed6000 rpmNumber of tool stations12 Speed max.4500 rpmBar diameter max.65 mmSpindle bore73 mmSwing- Ø, max.760 mmMax. Turning Length1085 mmWeight approx.6500 KgSLIMlineSLIMline DMG MORI operating system equipped with MAPPS. The large 15-inch display can reduce the number of switching of the screen as it provides the four-way split screen and allows user to see more information at once. It is also possible to customi(Spindle 1) 22/15/11 kW,4,500 min-1 (Standard)(Spindle 1) Standard Spindle 22/15/11 kW (30/20/15 HP), 4,500 min-1 The ALX2000 adopts a highly reliable ...

Brewery Ziemann 400 HL / brew – max. 12 brews/day Brewhouse made by Ziemann in year 2000, 400 hl/brew, with a mash filter, made by Meura in year 2000. It is almost complete brewery, which can produce various type of beers at 700’000 hl / annum. Brewery has also one returnable glass bottle (24’000 bph) and one can filling line (30’000 cph) which will be sold separately. Brewery equipment is in good condition, not dismantled, still on power. The brewhouse is controlled by Braumat control system. Most of the PLC controls is made with Siemens Simatic S7 series with central control via Ethernet. Installed mash filter Meura improves the performance of brewing process (compare to filter tank) and allows the use in the production low quality (dusty) malt and the filtration speed and quality do not change. The main technical characteristics of this brewery: Year of manufacturi ...

Micro Brewery Braumeister 500 L The Braumeister is the ultimate automated brewing system. For simplicity, ease of use and ease of cleaning it can’t be beaten. A 5 step fully automated control system makes brewing a breeze. The 500-litre system is ideal for a bar or cafe or a highly enthusiastic home brewer. Wheels, a hoist, compact, automated, jacketed for cooling and with a whirlpool operation, this is the ultimate small commercial brewing system. Technical Characteristics Manufacturer: Speidel GmbH Model: Braumeister 500 Litre Manufacturing year: 2016 Capacity: approx. 500 l finished beer / brew Quantity of malt: Max. 120 kg per mash Plato gravity scale: Up to 17 °P Control system: Speidel Gärmeister Heating spiral capacity: 6 x 3000 Watts Cooling jacket area: 1.8 m2 Wort pump: 370 Watts with speed control Electric connection: 18.4 kW / 400V / 50 Hz Material ...

Stephan UM25 Universal Machine three speeds 720/1430/2880 rpm Mixed insert blunt Stainless steel boiler with double jacket Machine tiltable for removing the processed medium Machine in very good condition Video about test run and other pictures available

Ribbin mixer/dryer,stainless steel,for powder/granulate,double jacket,variable speed.

; Gross weight [kg]: 3550; Engine: DC09 072A; Accessories: Tanker, Battery, Control Panel, Stahldach, Including battery charger and jacket water heater; Water Tank Volume [l]: 990

; Gross weight [kg]: 3550; Engine: DC09 072A; Accessories: Tanker, Battery, Control Panel, Stahldach, Including battery charger and jacket water heater; Water Tank Volume [l]: 990

Make and Model: MAN E3268L E212 Fuel: Biogas/Natural Gas Year: 2017 Hours: 0 Capacity kW: 370 HZ: 50 Voltage: 400V Scope of supply: Engine, Alternator, Base Frame, Gas Line, ComAp Control System, Motortech Ignition boxes, Heat Exchanger and all the associated equipment. More details below. 1 x IV 8 control screen 1x AIO-NTC-BB - Base Box with AFR dongle 1 x InteliDrive Mobile MAN logger unit 2 x I-IO8/8 Binary input/output cards 2 x I-AIN8 analogue input cards 1 x I- AIN8TC thermocouple input card 1 x DN 100 throttle body with stepper motor and wiring harness 3 x Varistep 3 controllers - the system only needs 2 1 x Varifuel 2 gas mixer and all the adapters, bolts and gaskets 1 x Detcon 20 Knocking controller with 8 knock sensors and cables 1 x MIC 4 ignition controller with output harness 1 x Cam pick up with harness 1 x speed pickup with harness 1 x Set of ...

Z-kneter,stainless steel,Strømmen type Universal,double jacket

Used slow speed ball mill for the production of chocolate creams made by Techmasz model WMK350. New 2019. The offer consists of: - 2x WMK350 ball mill - 2x chocolate pump with water jacket + piping - 1x DUO fat melting tank The slow-running ball mill was manufactured mainly for the food industry. Its technical parameters allow it to meet the high requirements of this industry. Technical data: - Mixer drive: Nord SK2282 VF - 112 MH/4 geared motor controlled by NORD inverter type SK500E-401-340 - Coupling type: Maintenance-free flexible torsion coupling size 75 with 92 Sh A coupling. - Agitator speed control: In the range 20-80 rpm - Noise level: Less than 85 dB(A) - Ball diameter/type: 13 mm/91 kg (approx. 10000 pcs.) - Usable volume of mixing chamber: Min. 11.50 l., Max. 342.00 l. Full documentation.

Process container standing Content 545 litres Product room: Pressure-resistant/vacuum-resistant +3/-1 Operating temperature 143 °C Interior polished Double jacket for heating and cooling: Pressure resistant + 2 bar Operating temperature 143 °C Mobile Agitator flange there is no agitator Pharmaceutical version

Ribbon mixer,stainless steel,double jacket,tank cover in the side,CIP in top,11 kW gearmotor.