jacket pump used for sale

Claw vacuum pump dry Manufacturer: Busch Type: Mink MM 1502 AV Motor: DS 400V suction power: 500 m3/h Final pressure: approx. 200 mbar (abs.) Zubehoer: Operating instructions delivery time: by arrangement; ready for use

Turbomolecular pump Manufacturer: Pfeiffer Type: TPU 2000S Status: Used Nr.: PMP01141/9007 A 12-month service is possible; ready for use

Waelz piston pump (rootsblowesis) Status: Generalueberholt Manufacturer: Leybold Type: Ruvac WS 501 Gewaehrleitung: 12 months Spare parts list; Oil filling delivery time: from stock; ready for use

Rotary vane vacuum pump dry Manufacturer: Becker Type: VT 4.40 Condition: Generalueberholt Spannung 400V DS Suction valves. 40m3/h Performance: 12 months Delivery time: from stock Other pumps on request !; ready for use

; ready for operation

Edwards Pump Station consisting: Rotary Vane Vacuum Pump: Edwards E1M175 Booster Vacuum Pump Roots Pump: Edwards EH1200 Condition: used General recovery of the geraete is possible with a capacity of 12 months. delivery time: from stock; ready for use

Rotary vane vacuum pump Manufacturer: Leybold Type: SV 630 B and BF Kat. No.: 960863 & 960867 Voltage: 50/60Hz 400V End pressure: 0.8 hpa(mbar) Status: Generalueberholt Gewaehrleistung: 12 months Including: engine restocking, repainting, electric check delivery time: from stock; ready for use

Centrifugal pump, CRI5-2A-CA-I-E-HQQE, 9/14,3m, 5,8m³ Grundfos, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition! The part was bought from a spare parts warehouse of a company, has never been in operation, is in a completely mint condition, but not in the original packaging. Vertical, multistage centrifugal. The pump components in contact with the medium are made of high-quality stainless steel. P: 0,37 KW, H: 9m, Hmax: 14,3m, Q: 5,8m³/h 160 x 220 x 450mm hoch, 17kg, Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation,  ...

Centrifugal pump, CRI10-02 A-CA-I-E-HQQE, 15,3/20m, 10m³/h, Grundfos, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition! The part was bought from a spare parts warehouse of a company, has never been in operation, is in a completely mint condition, but not in the original packaging. Vertikale, mehrstufige Kreiselpumpe. Die medienberührten Bauteile der Pumpe sind aus hochwertigem Edelstahl. P: 0,75 KW, H: 15,3m, Hmax: 20m, Q: 10m³/h Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will re ...

Pump for liquid / viscous media This promoted tough flowing latex over greater distances. Pump must be cleaned inside once, but then again full Einsatzbreit.

Injection pump from a Liebherr excavator Operating hours approx. 2,000 hrs pump was upgraded to electric Storage device is replaced. Pump is fully functional Special price

Two hydraulic valves from Rexroth, two hydraulic pumps and 5 hydraulic cylinders are offered, all new and indispensable as spare parts 1. 2 Stueck Rexroth Valves MNR: R900912485 DBW 10 B2-52/315-6EW230N9K4 FD: 48121 2. Voac Parker Hydraulics made in Sweden Part No. 3708719 Type F11-058-M8-CF-K-000 Ser No. 2000180541 3. Brueninghaus Hydromatik D-72160 Horb A10VSO 71 DR / 31R PPA12N00 FabrNr: 1117486 Bauj. 04/96 DR = 280 bar Vo =71 cm3 n=1500 min 4. 5 unused, two-sided hydraulic cylinders with bearings Type 70/50-280-625 Length from middle hole to middle hole approx. 625mm Total length approx. 750mm Piston diameter 70mm Rod diameter 50mm Piston path 280mm Special price

Injection pump PS6HL50 As good as new. Spare parts from bench tested Mitsubishi new engines ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

Umwaelz pump heating pump pump new and unused, ovp 1 pcs Grundfos UPC 50-120 3-400Volt 50Hz Special price Special price

Injection pump PS6HR50 As good as new. Spare parts from bench tested Mitsubishi new engines ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

Rexroth pump combination Hydromatik, R900751978 FD 48922, SY2DFE1-20/071-071 + 00746404 SN 30113831 Stock / stock # 5003

Injection pump PS6HL50 As good as new. Spare parts from bench tested Mitsubishi new engines ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

Voith Turbo 3-pump combination No. 170, 383114LV5-50 Type A10 VSO 100 DFE IPN 60, IPV 5-50 170

Coolant pump ET No.: 37545-80011 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

High pressure pump with a 12 bar President Graco. Model 210-007 To the funding of almost all media. Beam of 3cm to 20m possible, very powerful. Have 2 pieces.

Attachment: eccentric screw pump Manufacturer: Netzsch Type: NE 69 A Machine number: 253233 Year of construction: 1994 Capacity: 25m 3/h Engine: Dietz KW: 5.5 Voltage: 400V Connection suction side: DN 100 Port side: DN 100 Length: 2300 mm

Vacuum pump Manufacturer: Kinney Type: KT-505 LP Status: used ; ready for use

Machine: eccentric screw pump Manufacturer: Netzsch Type: 3 NE 08 Machine number: 253173 Year of construction: 1994 Capacity: approx. 300 l / h Engine: Dietz Drezhal: 1390 RPM KW: 0.55 Voltage: 400V Connection suction side: 3/4 inch Connection pressure side: 3/4 inch Length: 800 mm

Waelz piston pump (roots blow- Manufacturer: Pfeiffer Type: WKP 500 A Suction moulds: approx. 500 m3/h Cat. Nr.: PP W31 001 Status: Generalueberholt Gewaehrleitung: 12 months Including: oil filling, operating instructions; ready to use

Manufacturer: Busch Type: Mink MI 1502 BV Engine: 9.2 KW ; DS 400V Status: Used, Partial overtaking Performance: 6 months Suction power: 500 m3/h final pressure: approx. 250 mbar (abs.) Geraeusch Level: 85 dBa Zubehoer: additional suction filter (changed) ; Operating manual Delivery time: approx. 1-2 Where.; ready for use

Heat pump or chiller, water-cooled, Type: OCEAN Tech OCT-H 150, M.T.A. S.p.A. OCEAN Tech OCT-H 150 are heat pumps (alternatively chiller) water / water for indoor installation without hydraulic circuit (pump, accumulator) incl. crankcase heating, phase monitoring. (The dry cooler, storage tank and pumps are not included in the offer). Heating capacity 50.2 Capacitor Hot water temp. Outlet / Entrance: 45 / 40°C Volume flow m³/h 6.33 Evaporator Medium: Hot water Cooling water temp. Outlet/ Entrance: 7 / 12°C Medium: Cold water Refrigerant R 410A (Cooling capacity 44.6 – optionally possible) Evaporator Cold water temp. Outlet/ Entrance: 7 / 12°C Volume flow m³/h 7.64 Medium: Cold water Capacitor Cooling water temp. Outlet / Entrance: 35 / 30°C Medium: Cooling water Refrigerant R 410A Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3 pow ...

Waelz piston pump (rootsblowesis) Manufacturer: Pfeiffer Type: WKP 2000 A Suction suction systems: approx. 2065 m3/h engine: 5.5 KW Cat. Nr.: PP W61 000 Status: Generalueberholt Gewaehrleitung: 12 months Including: oil filling, user manual; ready to use

Rotary vane vacuum pump- packaging- Manufacturer: Busch Type: 220-80 Vacuum: 0.5 mbar Status: used, tested! Maintenance for the geraet is offered separately! Inclusive: Oil filling delivery time: from stock!; ready for use

Rotary vane vane vacuum pump- packaging Manufacturer: Busch Type: CB0251B Vacuum: 0.5 mbar Status: used, tested! Maintenance for the geraet is offered separately! Inclusive: Oil filling delivery time: from stock!; ready for use

Storage tanks, 10,000 litres According to DIN 6616/D, above ground, double-walled, incl. officially recognised test certificate. The tank has two saddle feet, a manhole DN 500 with domed lid, is used, inside empty and professionally cleaned and is equipped with the following fittings: 1 nozzle with TW closure (filler cap) and dip tube,. 1 sounding pipe provided with dip stick and sounding Rod seal, 1 vent pipe with vent hood, 1 new limit switch with type approval (AIII), 1 head and 1 spare socket for harvesting purposes, 1 optical leak display device with type approval and leak fluid. incl. mounting a console at above tank, incl. suction pipe 1 1/4 "as well as corner check valve with adjustable lift protection 1.5 3.0 m The container is externally repainted in RAL7042, traffic grey. (On request, we paint the tank in your House Paint / RAL tone) L = approx. 5.30 m + ...

Rotary vane vacuum pump Manufacturer: Leybold Type: Sogevac SV280 Status: used, tested! Maintenance for the geraet is offered separately! Inclusive: Oil filling delivery time: from stock!; ready for use

Various MAAG pump E.g. Extrex 90, 70, 56, and 36 Reconditioned available from stock in Wuppertal. more details on request

Claw vacuum pump dry Manufacturer: Busch Type: Mink MM 1322 AV Motor: DS 400V Suction power: 300 m3/h End pressure: approx. 150 mbar (abs.) Performance: 12 months Condition: New ashoer: suction filter; Operating instructions Delivery time: short-term; ready for use

Vacuum pump made piggyback in a good used and functional condition. Volume 400 m3/h. Engine made Bauknecht, plug-in ready. Dimensions W/D/H 80/120/90 cm. Operating voltage 400 volts. Workshop tested. More details on request.

Claw vacuum pump dry manufacturer: Busch Type: Mink MM 1252 AV Motor: DS 400V Suction power: 250/300 m3/h final pressure: approx. 100 mbar (abs.) Zubehoer: suction filter; Operating instructions Delivery time: short-term; ready for use

High-pressure pump - see pictures

Pump Allweiler SNEF120ER46D6.9W61-BGOR - see picture Next: ALWEILER pump with tank Diverse pumps ALLWEILER - for cooling etc., approx. 40 bar (see picture)

Dosing pumps Elados EMP 12500P06 (2 stub) Elados EMP 13300P035 (1 piece) Elados EMP 14000P035 (1 piece)

Oil pump, part no. 0R2770

Pump: centrifugal pump Manufacturer: Varisco Type: J40/J1-110 Year of construction: 2002 Capacity: 10 m3 / 13m / - 20 m3 Engine: Siemens KW: 1.1 Voltage: 380 V Speed: 2850 RPM Connection inlet DN 40 Port side: DN 40 Machine number: 107921 Dimensions: length 700 mm Product-contacting parts: stainless steel

Screw pump, EMTEC-A20R46-W110221, 100bar, 29L/min, Allweiler, new Special price If you have a VAT number, we will gladly issue you an invoice without VAT. As good as new in original packaging! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer, is completely as new and in the original packaging. Screw pump, EMTEC-A20R46-W110221, Allweiler - pressure 100bar - 7,08 KW - 29,1 L/min - incl. coupling for motor shaft D38mm - original packing Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.

System: diaphragm pump Type: LEWA G3H M511S Gr. 30 Description: with diaphragm pump head, material stainless steel Year of construction: 2002 / refurbished 2008 Stroke length: 30 mm Hubfreqquenz: 175 min1 Rod power: 16000 (N) Measuring current at pmax: 170 (ges. 510) l/h Max.Zul. working pressure: 250 bar at least. suction flange pressure: 1.0 bar Connections: Suction and pressure side DN 15 Pump body: Stainless steel 1.4571 Diaphragm: PTFE Guide / ball: 1.4581 / 1.4301 Speed: 1440 RPM Power: 7,5 kw Voltage: 230/400 Technical documents: Yes

Hydraulic pump / high-pressure pump SKF 729124 Max pressure: 100 MPa Volume: 0.5 cm3 Oelbehaelter Capazitaet: 250 cm3 The pressure hose: 1500 mm weight: 3.5 kg; ready for use

Immersion pump, MTR5-6/6 A-W-A-HUUV, 1,1 KW, 40m, 5,8m³/h, Grundfos, mint condition Special price ! If you have a VAT number, we will gladly issue an invoice without VAT As good as new! The part was purchased from a spare parts warehouse of a company, was there for some time in stock but never in operation and has minor storage traces. Immersion pump, cooling lubricant pump, MTR5-6/6 A-W-A-HUUV, Grundfos - 230/400V, 1,1 KW - Hmax. 40,4m, 5,8m³/h - Centering D140mm, pitch circle D 160mm, z4, - immersion depth 280mm Function guarantee! For second hand parts, we can not provide a conventional warranty and guarantee. However, we give you a functional guarantee. If the device does not work in the course of commissioning, you can return the goods and we will refund the purchase price.

Electric pumping system for oil or diesel for controlled extraction of oil quantities from large containers such as oil barrels, tanks, etc. Consisting of electric motor with pump, pressure monitor, hose reel, pump gun with manual pass counter with rigid outlet. Display of the extracted quantity in litres Electric pump for fresh oil supply, suitable for barrel removal or as a tank pump, Closed hose reel for oil, hose length xxm xx" hose, with wall mount and pump gun. Special price

Manufacturer: VARIAN TYp: VHS-6 Operaring range 1.5x10-3 x 5x10-9 Torr Pumping speed : 2400 l/sec Technical data to be seen in the pictures! Number: 14 stueck ; ready for use

Nominal rating l/h 2000 l/h Motor rating 0,37 (0,5) kW (PS) Connected load 230V 50Hz (single-phase) Electrical protection 16 A Weight 14 kg Material 1.4301 / AISI 304 Pressure max. 1,5 bar / 15m Suction max. 0,5 bar / 5m Connection for juice inlet 1¼ \" Connection for juice outlet 1¼ \" ; new machine - top condition

Manufacturer: APD Tip: 12 SC Pumping speed 3600 l/s Capacity 5x10-6 Torr Ideal for high vacuum Number: 11 pcs ; ready for use

Self-priming eccentric screw pump including 2/3 hose fitting with nut nut MG90/65 sleeve VA and 2/3 hose fitting with groove nut DN65/65 sleeve VA mounted on a chassis. Technical data: Rated power 4 020 / 8 160 l/h Engine power: Level 1 1.0 (1.36) kW (PS) Level 2 1.9 (2.6) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical protection 16 A Dimensions: Length 1 270 mm Width 500 mm Height 810 mm Weight 57 kg Material 1.4301 / AISI 304 Connections: front MG90 AG top DN65 AG can be used for mash

Self-priming eccentric screw pump including 2/3 hose fitting with nut nut MG90/65 sleeve VA and 2/3 hose fitting with groove nut DN65/65 sleeve VA mounted on a chassis. Technical data: Rated power 9 960 / 19 380 l/h Engine power: Level 1 2.5 (3.4) kW (PS) Level 2 4.2 (5.71) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical protection 16 A Dimensions: Length 1 270 mm Width 500 mm Height 810 mm Weight 90 kg Material 1.4301 / AISI 304 Connections: front MG90 AG top DN65 AG can be used for mash