jacket pump used for sale

Well pump, centrifugal pump, water pump RED JACKET UMP i50S3-S diameter. Ø 120 mm motor: 1.2 kW 220 V

Cat. No. 11-3600-1 New V2A storage tank / combination tank / stacking tank with cooling jacket - 1000 + 500 litres Standard: 3 feet Stand display with bar and scale incl. Fender filling nozzle supfront NW 50 Cone bottom bottom and top Surface: 3D and exterior marbled inside Remaining outlet NW 50 Connection for barrel hole flap DN 50 Manhole front oval 300 x 435 mm - extended Diameter 920 mm Volume: bottom (Basei): 1000 litres top (stack): 500 litres Base tank height (bottom): 2085 mm Stacking tank height (top): 1050 mm Total height: 3135 mm Surcharges/pieces: Disc valve DN 50 Tap flap gr.37 Cutting tube for tap flap size 37 m.Disc valve NW 40=Clear drain Trial tap Agitator 0.37 kW, 400 V, 1370 rpm with connection for tap flap Gr.37 For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 ...

Cat. No. 11-3600-3 new Storage Vessels / Stackable Tanks in AISI 304 with Cooling Jacket 1000 + 800 Litres Standard Equipment: 3 Feet Level Indicator Tank Inlet on the Top NW 50 Diameter 920 mm Bottom and Top in Conical Shape Surface: inside IIID and outside marbled Discharge Outlet NW 50 Connection for Clap DN 50 Manhole on the front in oval shape 300 x 435 mm – pressed-in Volume: on the ground: 1000 litres on the top: 800 litres Height on the ground: 2085 mm Height on the top: 1550 mm Total height: 3635 mm Surcharges/unit: Butterfly Valve DN 50 Clap Gr.37 Tapping Pipe for Clap Gr. 37 with Butterfly Valve NW 40=Clear Discharge Sample Valve Mixer 0,37 kW, 400 V, 1370 rev/min with connector for Clap size 37 For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobil ...

Cat. No. 11-3600-4 new Storage Vessels / Stackable Tanks in AISI 304 with Cooling Jacket 800 + 500 Litres Standard Equipment: 3 Feet Level Indicator Tank Inlet on the Top NW 50 Diameter 920 mm Bottom and Top in Conical Shape Surface: inside IIID and outside marbled Discharge Outlet NW 50 Connection for Clap DN 50 Manhole on the front in oval shape 300 x 435 mm – pressed-in Volume: on the ground: 800 litres on the top: 500 litres Height on the ground: 1835 mm Height on the top: 1050 mm Total height: 2885 mm Surcharges/unit: Butterfly Valve DN 50 Clap Gr.37 Tapping Pipe for Clap Gr. 37 with Butterfly Valve NW 40=Clear Discharge Sample Valve Mixer 0,37 kW, 400 V, 1370 rev/min with connector for Clap size 37 For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: ...

Cat. No. 11-3600-5 new Storage Vessels / Stackable Tanks in AISI 304 with Cooling Jacket 800 + 600 Litres Standard Equipment: 3 Feet Level Indicator Tank Inlet on the Top NW 50 Diameter 920 mm Bottom and Top in Conical Shape Surface: inside IIID and outside marbled Discharge Outlet NW 50 Connection for Clap DN 50 Manhole on the front in oval shape 300 x 435 mm – pressed-in Volume: on the ground: 800 litres on the top: 600 litres Height on the ground: 1835 mm Height on the top: 1200 mm Total height: 3035 mm Surcharges/unit: Butterfly Valve DN 50 Clap Gr.37 Tapping Pipe for Clap Gr. 37 with Butterfly Valve NW 40=Clear Discharge Sample Valve Mixer 0,37 kW, 400 V, 1370 rev/min with connector for Clap size 37 For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: ...

Cat. No. 11-3600-6 new Storage Vessels / Stackable Tanks in AISI 304 with Cooling Jacket 800 + 800 Litres Standard Equipment: 3 Feet Level Indicator Tank Inlet on the Top NW 50 Diameter 920 mm Bottom and Top in Conical Shape Surface: inside IIID and outside marbled Discharge Outlet NW 50 Connection for Clap DN 50 Manhole on the front in oval shape 300 x 435 mm – pressed-in Volume: on the ground: 800 litres on the top: 800 litres Height on the ground: 1835 mm Height on the top: 1550 mm Total height: 3385 mm Surcharges/unit: Butterfly Valve DN 50 Clap Gr.37 Tapping Pipe for Clap Gr. 37 with Butterfly Valve NW 40=Clear Discharge Sample Valve Mixer 0,37 kW, 400 V, 1370 rev/min with connector for Clap size 37 For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: ...

Cat. No. 11-3600-7 new Storage Vessels / Stackable Tanks in AISI 304 with Cooling Jacket 600 + 500 Litres Standard Equipment: 3 Feet Level Indicator Tank Inlet on the Top NW 50 Diameter 920 mm Bottom and Top in Conical Shape Surface: inside IIID and outside marbled Discharge Outlet NW 50 Connection for Clap DN 50 Manhole on the front in oval shape 300 x 435 mm – pressed-in Volume: on the ground: 600 litres on the top: 500 litres Height on the ground: 1485 mm Height on the top: 1050 mm Total height: 2535 mm Surcharges/unit: Butterfly Valve DN 50 Clap Gr.37 Tapping Pipe for Clap Gr. 37 with Butterfly Valve NW 40=Clear Discharge Sample Valve Mixer 0,37 kW, 400 V, 1370 rev/min with connector for Clap size 37 For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: ...

Cat. No. 11-3600-8 new Storage Vessels / Stackable Tanks in AISI 304 with Cooling Jacket 600 + 600 Litres Standard Equipment: 3 Feet Level Indicator Tank Inlet on the Top NW 50 Diameter 920 mm Bottom and Top in Conical Shape Surface: inside IIID and outside marbled Discharge Outlet NW 50 Connection for Clap DN 50 Manhole on the front in oval shape 300 x 435 mm – pressed-in Volume: on the ground: 600 litres on the top: 600 litres Height on the ground: 1485 mm Height on the top: 1200 mm Total height: 2685 mm Surcharges/unit: Butterfly Valve DN 50 Clap Gr.37 Tapping Pipe for Clap Gr. 37 with Butterfly Valve NW 40=Clear Discharge Sample Valve Mixer 0,37 kW, 400 V, 1370 rev/min with connector for Clap size 37 For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: ...

Cat. No. 11-3600-9 new Storage Vessels / Stackable Tanks in AISI 304 with Cooling Jacket 500 + 500 Litres Standard Equipment: 3 Feet Level Indicator Tank Inlet on the Top NW 50 Diameter 920 mm Bottom and Top in Conical Shape Surface: inside IIID and outside marbled Discharge Outlet NW 50 Connection for Clap DN 50 Manhole on the front in oval shape 300 x 435 mm – pressed-in Volume: on the ground: 500 litres on the top: 500 litres Height on the ground: 1335 mm Height on the top: 1050 mm Total height: 2385 mm Surcharges/unit: Butterfly Valve DN 50 Clap Gr.37 Tapping Pipe for Clap Gr. 37 with Butterfly Valve NW 40=Clear Discharge Sample Valve Mixer 0,37 kW, 400 V, 1370 rev/min with connector for Clap size 37 For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: ...

Cat. No. 11-3600-9 New V2A storage tank / combination tank / stacking tank with cooling jacket standing round on feet Standard: 3 feet Stand display with bar and scale incl. Fender filling nozzle supfront NW 50 Cone bottom bottom and top Surface: 3D and exterior marbled inside Remaining outlet NW 50 Connection for barrel hole flap DN 50 Manhole front oval 300 x 435 mm - extended Diameter 920 mm Volume: bottom (base): 500 litres top (stack): 500 litres Base tank height (bottom): 1335 mm Stacking tank height (top): 1050 mm Total height: 2385 mm Surcharges/pieces: Disc valve DN 50 Tap flap gr.37 Cutting tube for tap flap size 37 m.Disc valve NW 40=Clear drain Trial tap Agitator 0.37 kW, 400 V, 1370 rpm with connection for tap flap Gr.37 For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905- ...

Ferrari mobile double jacketed mixer, year of construction: 1993, gas heated, inside dimensions: Ø 490 mm x 640 mm, total dimensions: 690 mm x 680 mm x 2150 mm.

Wildri NV double jacketed diesel tank, tank number: 0712, year of construction: 2003, volume: 15.000 litres, test pressure: 0.3 / 3.0 bar, diameter tank: 1600 mm, length tank: 7800 mm. Partly filled.

Usable volume: 1400l, melting kettle capacity: 90l, with anchor agitator and a homogenizer, for heating and cooling, was mainly used for the production of lotions, an on-site inspection is possible.

USED STAINLESS STEEL 16.000 LITRES JACKETED TANK WITH INNER COIL REF.: C6285 Vertical tank made of stainless steel with a total capacity of 16,000 liters. Klopper top bottom with manhole, sight glass, sight glass for spotlight, lifting lugs, central stirring flange and flange-type connections. Jacketed klopper lower bottom with inner coil and bottom discharge. On 4 brackets. General characteristics: Material Stainless steel Technical characteristics: Capacity 16.000 litros totales Bottom type Klopper Camisa En el fondo inferior On 4 brackets Ears x2 Man hole x1 Peepholes x2 Vessel outside diameter 2500 mm Vessel height 2750 mm Vessel height + funds (TOTAL: 4400 mm)

MaK M20 Water Jacket used, overhauled Price on request.

6000 l container made of V2A double jacket for sale from location Very good condition, straight from production!

000 l container made of aluminium double jacket For sale from location With agitator Very good condition, straight from production!

Drum pump, hygienic ExzenterschneckenpumpeVon of the company GrünpumpenTechnische DatenTyp ds.: LDS 80.1Ser. No.: 0259 Qm³ / h 2,40N1 / min: möglichVerpackung 6,75ZahlungsmodalitätenBarzahlung pick up and transfer in advance and shipping pick up, shipping via forwarding and abroad by prior arrangement all data were listed to the best of our knowledge and belief.Errors are reserved. This auction is aimed only at professionals, dealers, and other legal persons.

; ready for operation

Waelzpistongeblaese Manufacturer: Leybold Typ: RUVAC WAU 1001 Cat No.: 11741 Suction plugs: approx. 1000m3/h Status: Generalueberholt Gewagewgewgewgewgewgew: 12 months Delivery time: from stock; ready for use

Waelz piston pump (roots blow- Manufacturer: Pfeiffer Type: WKP 1000 suction moulds: approx. 1000 m3/h Status: As new in original packaging Gewaehrleitung: 12 months from delivery Zubehoer: User Manual; Spare parts list Further accessories by arrangement; ready for use

Waelzpistongeblaese Manufacturer: Leybold Type: RUVAC WSU 2001 Cat No.: 11741 Suction moulds: approx. 2000m3/h Status: Generalueberholt Gewastperformance: 12 months (similar); ready for use

Flygt pumps model 3085 Top quality! Steel case, stainless steel shaft 2 kW 1395U RPM Flow rate corresponds to ca 30 l / s 1800 l / min Total length ca. 80 cm, 60 kg Very good condition! â?¬499 This is not a DIY part, these pumps are offered usually for twice. Preferred site 76829 Landau, pick up, delivery possible

Vacuum pump, airframe pump, rotary vane pump ALCATEL type 100-132 Fabr. No. 173082 - 3101 Year of construction: approx. 1995 Volume flow: approx. 50 m3/h Negative pressure: 0.5 mbar (indicated on the type plate)Negative pressure: - 0.9 bar (determined during test run) Motor power: 3 kW Motor speed: 1420 rpm. Mains connection: 400 Volt, 50 Hz - Oil-lubricated rotary vane pump Dimensions L x W x H: 700 x 420 x 310 mm Weight: 78 kg good condition; used

KSB VF35-5 Movitec high-pressure inline pump 11 kW Manufacturer: KSB Type: Movitec VF32 5 ID No.: 47110112 Maximum flow rate: 27 m³/h Maximum flow rate: 2850 l/min Mains voltage: 3~400/690 V Degree of protection: IP55 Power: 11 kW 21.8 A You can find more centrifugal pumps - new and used - in our shop! International shipping costs on request!

Kat-No 08-1514 in very good condition - checked! Pump diagnostics: Pressure test: 4 bar Suction capacity up to -1.5 bar: -0.5 Conveyor pressure: 3 bar Power: 23,500 liters/h Ampere min/max: 3.8 Other pump types or our complete range (tanks, pumps, filters, beverage technology) on request! For questions call 09353 909050 or 0171 651 8248 Fax: 09353 9090522 All prices are ex works, plus Vat Intermediate sale reserved. Freight cost share: by scope of delivery Sightseeing is also possible on weekends or evenings by appointment.

Kat-No 08-1632 in very good condition HxLxW: 56x78x30 cm For further information: Tel: 09353 909050 or Fax: 09353 9090522 Mobile: 0171 6518248 All prices are ex works plus law VAT Intermediate sale reserved Freight cost share: by scope of delivery Delivery time: immediately from stock Sightseeing is also possible in the evening or on weekends by appointment.

Cat. No. 07-1268 in very good condition Type SEP 100.1 Design: H1 PO1 Dimensions: Length: 143 cm Width: 56 cm Height: 143 cm Capacity: 60 litres/min., 3600 l/h Pressure: 6 bar Engine power: 4 kW DN 65 For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 On request, we will be happy to send you our complete catalogue. Sightseeing is also possible in the evening and on weekends by appointment. All prices are ex works plus law VAT Intermediate sale reserved! Freight cost share: by scope of delivery

Kat. No. 11-3290 in a very good condition 5000 - 10,000 litres Measurements and weight: HxLxB: 75 x 130 x 30 cm weight: 85 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Warman ®, AH, ® pump, AH, 4/3 from the cyclone supply up to regrinding, Flotation and departures is the Warman ®, AH, ® pump the best choice. 3 pumps are available!

Oel-Diffusion pump Manufacturer: Leybold Type: DIP 50,000 Status: used Technical data Product: DIP 50000 Catalogue: 22240 Connection flange Suction side: DN 1000 ISO-F Connection flange Print side: DN 160 ISO-K Suction Below 1.0 x 10-4 mbar / 7.5 x 10-5 Torr: 50000 l/s working range: 1.0 x 10-2 - 5.0 x 10-7 mbar 7.5 x 10-3 - 3.8 x 10-7 Torr Final pressure: < 5.0 x 10-7 mbar < 3.8 x 10-7 Torr Max. pre-vacuum pressure: 6.0 x 10-2 mbar 4.5 x 10-2 Torr Equipment: Pump is delivered without equipment quantity of equipment min.: 12.0 l 12.7 qt max.: 25.0 l 26.4 qt grid connection: 3-ph Y, 400 V, 50/60 Hz Heating capacity: 24 kW Number of heating cartridges: 24 Heating time: < 30 min Number of cooling water circuits: 3 Cooling water minimum pump: 1500 l/h 6.6 gal/min Duesenhut steam barrier: 150 l/h 0.66 gal/min Max. Cooling water pressure: 6 bar 87 psi Cooling water connection pump: 1/ ...

Oil diffusion pump Manufacturer: Leybold type: DIP 50,000 Status: used Technical data Product: DIP 50000 cat. No.: 22240 Suction side connection flange: DN 1000 ISO-F Connection flange printed page: DN 160 ISO-K Pumping speed for air below 1.0 x 10-4 mbar / 7.5 x 10-5 Torr: 50000 l / s Working range: 1.0 x 10-2 - 5.0 x 10-7 mbar 7.5 x 10-3 - 3.8 x 10-7 Torr Final total pressure: < 5.0 x 10-7 mbar < 3.8 x 10-7 Torr Maximum permissible forevacuum pressure: 6.0 x 10-2 mbar 4.5 x 10-2 Torr Resources: Pump delivered without resources Amount of resources min: 12.0 l 12.7 qt Max: 25.0 l 26.4 qt Power supply: 3-ph Y, 400 V, 50/60 Hz Heating power: 24 kW Number of cartridges: 24 Heating-up time: < 30 min Number of cooling circuits: 3 Minimal cooling water Pump: 1500 l / h 6,6 gal / min Jets Hat vapor barrier: 150 l / h 0.66 gal / min Cooling water pressure: 6 ba ...

Immediately applicable

brand new pump / tank column / data acquisition / diesel tank system Type eco 55 - not calibrated, Capacity up to approx. 55 l/min. suitable for diesel fuel, incl. - Tank machine with PC software (2,000 users) - 2 driver/vehicle identification system - Identification via transponder technology - USB interface for data retrieval - Wing cell pump with single-phase asynchronous motor - 230 volts - Oval wheel counter with pulse generator, accuracy = approx. +/- 0.5% - Inclined seat filter / dirt filter with fine sieve - 4 m dispensing hose DN 19 with type-approved automatic tap valve, incl. swivel joint and tap hose holder - Suction height approx. 3.5 m - Robust powder-coated steel plate housing Dimensions: approx. 1,410 x 520 x 275 mm - two-line, illuminated monochrome display, font height 8 or 19 mm - Tank data storage for up to 10,0 ...

Horn pump Cabinet consisting of: -2 x Horn pump MP 5 (700 l / min) -&amp;gt; For heating oil, diesel and bio-diesel Technical data: Max capacity: 700 l / min Supply voltage: 400 / 50 V / Hz Capacity: 2, 5kW Inlet: DN 80 Pressure connection: DN 80 Maximum suction height: 4, 5 m Protection class: IP 44 Pump Cabinet is painted and fully functional! The pumps can be expanded like at extra charge out of the closet, but we would prefer a sale as a complete package!

; ready for operation

Screw Vacuum Pump - Unused Manufacturer: Alcatel / Adixen Type: A 300 P Motor: 380-460V Status: Used; As Performance: 12 months Suction power: 320 m3/h connection: ISO-K 63 final pressure: approx. 1.2x10-2 mbar (abs.) Including: user manual ; ready for use

Claw vacuum pump dry compression Manufacturer: Busch Type: Mink MM 1402 AV Motor: DS 400V suction power: 400 m3/h Final pressure: approx. 200 mbar (abs.) Zubehoer: Operating instructions delivery time: by arrangement; ready for use

; ready for operation

Waelz piston pump booster Manufacturer: Busch Type: Panda WV 0500 C/B and Panda WV 1000 C/B available suction swells: 500 - 1000 m3/h Performance: 12 months Status: Generalueberholt Delivery time: by arrangement; ready for use

Locking valve vacuum pump DK200 Status: Generalueberholt Gewaehrleistung: 12 months Manufacturer: Leybold Type: DK200 Engine rated power: 5.5KW nominal suction digesters: 200m3/h Final pressure without gasb.: small 5x10e-3 Zubehoer: Operating instructions with spare parts list

Status: New Manufacturer: Pfeiffer Type: TMH 064 Mod.-Nr.: PM P02 366 Remark To operateonly with appropriate pre pump and control. delivery time: on request; ready for use

Rotary vane vane vacuum pump- packaging Manufacturer: Busch Type: 251-512 Status: used, tested! Inclusive: Oil filling delivery time: from stock!; ready for use

System: piston diaphragm pump Manufacturer: Abel Type: FDG 322 Machine number: 3506 Year of construction: 1989 Performance: 15 m3 Pressure: 15 bar Engine: BBC, 11 kW, 50 Hz

System: piston diaphragm pump Manufacturer: Abel Type: CM G E272 Manufacturer no.: 10074 Construction year: 2013 Performance: 15 m3/h Pressure: 1.00 MPa Motor: 7,5 kW, 50 Hz

System: used piston diaphragm pump / pump Type: HMD-G-50-500 Flow rate: 40.0 m3/h Pressure: 1,6 MPa

Waelz Piston Pump Booster Vacuum Pump Manufacturer: Busch Typ: Panda WV 4500 B Suction plugs: 4100 m3/h Vacuum: Pre-pump output Gewawting capacity: 12 months Status: as good as new, reserve device; ready for use

Busch two-stage pump level: Data Pump status: Type: BNV 1000 A Vacuum: 0.005 mbar (abs.) data Pre-pump: Type: NC0400B Suction volume: 400m3/h End pressure: 0.05mbar (abs.) Data Booster: Type: WV1000B Suction power: 1000m3/h End pressure: 0.005mbar (abs.) Condition: tested, maintained (good condition) Including: vacuum pre-filter, oil filling Performance: 3 months; ready for use

Leybold pump level Data on pump level: RUTA - Pump system RUTA 1001 (20900895586) (02209= Pre-pump: Leybold Sogevac SV300 Cat: 109 31 booster pump: Leybold Ruvac WAU1001 Kat: 11741 Condition: The pump level is completely cleaned and repainted and tested according to the manufacturer's specifications and is 100% fine, without oil leak Performance: 3 months 22x SV300 +WSU1001H are available! There are 10x SV300 + WAU1001 verguegable! ; ready for use

Waelz Piston Pump Booster Vacuum Pump Manufacturer: Busch Typ: Puma WP 1000 D2 Status: used, tested A complete recovery can be offered as an alternative. Then with 12 months of service to the geraet.; ready for use