ja used for sale

SIKO IF09C/1 - 0002 Interface converter for CAN bus, Jagenberg Diana Pro. Used, tested. Gateway modules for connecting SIKO sensors and displays to standardized fieldbus systems. There are three bus connections available. SIKO offers a specific transmitter for each connection. Up to 31 subscribers can be connected to the Profibus or CAN bus via the RS485 interface.

Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 250 mm -Passage: Ø 80 mm -Weight: 19 kg

Tapping Jaws RIDGID 1/4 - 3/8 NPT 47760 2 Set New ! Dimensions: 230 x 120 x 20 mm

Tapping Jaws RIDGID 8MM x 1.25 50050 New ! Dimensions: 190 x 90 x 20 mm

Hydraulikheber MADIX DRESDEN SK 25 / 175 ( SK25/175 ) lifting capacity: 25 mp lifting height: 175 mm used, tested ! Dimensions: 300 x 130 x 200 mm

Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 250 mm -Passage: Ø 75 mm -Weight: 21.5 kg

Rotary table with 4 jaw chucks PAGUS diameter: Ø 160 mm table height: 160 mm lathe chuck 360° rotatable ( manual, without gearbox ) with 15° detent ( small lever ) two levers for clamping the lathe chuck used, tested ! Dimensions: 390 x 330 x 160 mm

Clamping device with 3-jaw chuck, three-jaw chuck PAGUS three-jaw chuck: Ø 315 mm height with jaws: 180 mm Dimensions: 420 x 320 x 180 mm

3-jaw chuck, three-jaw chuck, power chuck, wedge hook chuck WMW Type: DKRF A/-200x3 ( DKRFA/-200x3 ) TGL 34-185 Outer Ø: 200 mm Bolt circle Ø : 133 mm flange Ø : 175 mm Height with jaws: 230 mm Jaws individually adjustable by toothing ! New !' Dimensions: 200 x 200 x 320 mm

Torsionally flexible jaw coupling KTR Kupplungstechnik Rotex GS 24/28 P New ! Dimensions: 280 x 60 x 60 mm

Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 250 mm -Passage: Ø 80 mm -Weight: 19 kg

3-jaw chuck, three-jaw chuck WMW DH-B 200x3x6 ( DH-B200x3x6 ) TGL 30-2332 Outer Ø: 200 mm Bolt circle Ø : 133.5 mm Bore Ø: 54 mm Height with jaws: 140 mm used, tested ! Dimensions: 200 x 200 x 121 mm

Hydraulic jack, hydraulic universal jack YALE JH-30 lifting capacity: 30 t stroke: 180 mm height lowered: 300 mm used, tested ! Dimensions: 300 x 170 x 210 mm

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Feed size: Ø 200 m -Through hole: Ø 54 mm -Weight: 12 kg

Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 250 mm -Passage: Ø 75 mm -Short cones: 6 -Recess: Ø 194 mm -Weight: 29.5 kg

3-jaw chuck, three-jaw chuck, power chuck BIAL, BISON 2404-250 outer Ø: 250 mm bolt circle Ø : 172 mm height with jaws: 167 mm max. 3000 rpm jaws individually adjustable by toothing ! New !' dimensions: 250 x 250 x 170 mm

3- Jaw chuck, three-jaw chuck PAGUS outer Ø: 200 mm flange:155 mm bolt circle: 174 mm height with jaws: 100 mm bore: 55 mm square for key: 11.5 mm dimensions: 200 x 100 mm

Clamping device with 3-jaw chuck, three-jaw chuck WMW three-jaw chuck: DH - A - 200 x 3 TGL 30-2332 outer Ø: 200 mm bore Ø: 54 mm height with jaws: 105 mm base plate: Ø 310 x 21 mm Loochkreis base plate: Ø 260 mm bolt base plate: Ø 36 mm used, tested ! Dimensions: 310 x 310 x 131 mm

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 250 mm -Recess: Ø 210 mm -Passage: Ø 80 mm -Weight: 20.7 kg

Two-jaw chuck, 2-jaw chuck, vise, faceplate -Mouth size: Ø 250 mm -Short cones: 11 -Recess: Ø 199 mm -Weight: 36.5 kg

Two-jaw chuck, 2 jaw chucks, vice, face plate -Chuck size: Ø 250 mm -Short taper: 11 -Rezess: Ø 199 mm -Weight: 35.8 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 270 mm -Throughout: Ø 85 mm -Short taper: 6 -Recess: 157 mm -Weight: 38 kg -with: signs of usage but functional

ABC Open-end Pipe Wrench ALARM 1 1/2 11034 DIN 5234 67 mm Corner O-Point Jaw Shape for Round and Square Workpieces and Sheets Chrome Vanadium Steel New ! Dimensions: 445 x 90 x 25 mm

3-jaw chuck, three-jaw chuck with flange PAGUS outer Ø: 160 mm bolt circle Ø (flange) : 105 mm bore Ø: 40 mm height with jaws: 105 mm Dimensions: 160 x 160 x 105 mm

Three-jaw chuck, 3-jaw chuck -Mouth size: Ø 200 mm -Passage: Ø 54 mm -Recess: Ø 160 mm -Weight: 12.6 kg

Three-jaw chuck, 3-jaw chuck -Mouth size: Ø 200 mm -Passage: Ø 50 mm -Weight: 13.5 kg

3- Jaw Chuck WMW NILES DHK 200x3 Outer Ø: 200 mm Flange: 155 mm Bore Ø: 60 mm Bolt circle: 175 mm Height with jaws: 125 mm Chuck number: 507 Dimensions: 200 x 200 x 125 mm

Two-jaw chuck, 2-jaw chuck, vise, faceplate -Mouth size: Ø 250 mm -Passage: Ø 80 mm -Recess: Ø 209 mm -Weight: 21 kg

Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 250 mm -Passage: Ø 70 mm -Short cones: 8 -Weight: 28 kg

Three-jaw chuck, three-jaw lathe chuck - Chuck size: Ø 250 mm - Passage: Ø 80 mm -Short taper: 6 -Remark: without further jaws -Weight: 26.1 kg

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 250 mm -Passage: Ø 80 mm -Recess: Ø 210 mm -Weight: 18.5 kg

3-jaw chuck, three-jaw chuck with outer jaws PAGUS outer Ø: 250 mm bore Ø: 80 mm flange: 111 mm Bolt circle:134 mm height with jaws: 123 mm chuck number: 72 295 jaw number: 12 295 short cone Dimensions: 250 x 250 x 123 mm 3 Extra Jaws

Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 160 mm -Passage: Ø 41mm -Weight: 8.7 kg

3-jaw chuck, three-jaw chuck ROTO RECORD DHAP 200 TGL 30 2334 outer Ø: 200 mm bolt circle Ø: 175 mm bore Ø: 54 mm height with jaws: 120 mm max. 3200 rpm split jaws ! Dimensions: 200 x 200 x 120 mm

3-jaw chuck, three-jaw chuck PAGUS Ø: 380 mm bolt circle Ø : 235 mm bore Ø : 108 mm height: 180 mm Was used on a Toyoda HES52 with many accessories !' used, tested ! Dimensions: 380 x 380 x 180 mm

3-jaw chuck, three-jaw chuck PAGUS outer Ø: 475 mm bolt circle (flange) Ø: 172 mm bore Ø: 190 mm bore (flange) Ø: 140 mm height with jaws: 175 mm with second set of jaws !' used, tested ! Dimensions: 480 x 480 x 250 mm

3-jaw chuck, three-jaw chuck WMW DH475x3-III TGL 30 2332 outer Ø: 475 mm bolt circle (flange) Ø: 172 hole Ø: 190 mm bore (flange) Ø: 140 mm height with jaws: 195 mm max. 800 rpm used, tested ! Dimensions: 475 x 475 x 195 mm

3-jaw chuck, three-jaw chuck, power chuck, wedge hook chuck WMW TGL 30-2312 Outer Ø: 200 mm Bolt circle Ø : 150 mm Flange Ø : 180 mm Height with jaws: 153 mm Jaws individually adjustable by toothing ! used, tested !' Dimensions: 200 x 200 x 250 mm

Clamping jaws, jaw boxes for face plate type 1516

Three-jaw chuck, 3-jaw chuck -Chuck size: Ø 310 mm -Passage: Ø 110 mm -Bayonet: short cone flange cone size 6, cone Ø 106 mm, bolt circle Ø 133.4 mm -Weight: 47.2kg

Three-jaw chuck, 3-jaw chuck -Mouth size: Ø 200 mm -Passage: Ø 54 mm -Weight: 12.6 kg

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Feed size: Ø 200 m -Through hole: Ø 54 mm -Short cones: 5 -Bolt circle: 105 mm -Weight: 16.2 kg

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 200 mm -threaded mounting -Through hole: Ø 53 mm -Weight: 19.7 kg

Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 190 mm -Passage: Ø 56 mm -Weight: 10.6 kg

diameter: 400 mm bore: 135 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Used 3-jaw chuck The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Jungheinrich ESE 20 high-speed electric pallet jack truck RA2397 Manufacturer: Jungheinrich Model: ESE 20 Year of manufacture: 2003 Serial number: 90074846 Battery change: 2016 TÜV: until 2023 Operating hours: 4267 h Fork length: 1930 mm Fork width outside: 540 mm Maximum load capacity: 2000 kg Lifting: 125 mm Travel speed 8.5-12.5 km/h Including: Instrument cluster and information and service display Quick charger 380V Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 250 mm -Recess inlet: Ø 210 mm -Through hole: Ø 80 mm -Weight: 18 kg

Three-jaw chuck key, three-jaw lathe chuck -square size: 17 mm -Sleeve: Ø 38 mm -Number: 2x available -Price: per piece -Weight: 2 kg/piece

Crimping jaws, crimping tools for cable end sleeves, wire end sleeves, cable lugs -for: cable end sleeves -Sizes: approx. Up to 28 mm² -in the suitcase -Dimensions: 490/300/H70 mm -Weight: 22.4 kg

Thread cutting dies, replacement dies, thread cutting heads with chasers, thread cutting stock, thread cutting machine, pipe thread cutter -various: thread cutting sizes -Price: complete -Weight: 12 kg