ja used for sale

ID3500 Crushing plant for the production of frost protection Crushing plant for the production of frost protection Crushing plant for the production of frost protection consisting of: 1) Humboldt - double knee crusher Type: BDG 900 x 700 Jaw width 900 x 700 2) Pfister vehicle scale type TAW 30 Maximum load: 30 tons Bridge size: 8 x 2.5 m Standard printing unit as a recording device 3) Steel sheet silo for individual installation 4 supports made of IP beams Total height 8 m, clearance height 3 m Outlet 600 mm, silo closure as a flat slide with rack adjustment and handwheel operation. An electric vibrator was subsequently attached to the outlet. 4) SBM impact grinding mill type PMM 10/6/4 export 5) Push-cart feeder type SW 1000 x 4000 with inlet hopper for the crusher 6) Existing conveyor belts 7) Screening system Parts lists and purchase invoices are available for mo ...

For sale are several screw jacks from the manufacturer NEFF Gewindetriebe GmbH, type C3-RF-6-T30x6, in various designs. These are new or unused components. Basic technical data (slightly different depending on the model): - Type: C3-RF-6-T30x6 - Size: C3 - Ratio: i = 6:1 - Stroke: 300 mm - Installation position: vertically upwards - Spindle type: rotating spindle - Trapezoidal lead screw: TGS-R-30x6-RH - Operating torque: approx. 6.1 Nm / Starting torque: approx. 8.5 Nm - Total lengths: 450 mm or 496 mm depending on the model - Special designs: Models with bellows and adapter available - Spindle nut: Bronze, Ø 60 mm Hint: There are several variants available. Details on the execution can be requested individually.

diameter: 400 mm = pneum. 3-jaw chuck make RÖHM, 400 mmø, with CAMLOCK flange, length of the pull rod 780 mm, ø of the pull rod 40 mm, with maintenance unit The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

USED STAINLESS STEEL 16.000 LITRES JACKETED TANK WITH INNER COIL REF.: C6285 Vertical tank made of stainless steel with a total capacity of 16,000 liters. Klopper top bottom with manhole, sight glass, sight glass for spotlight, lifting lugs, central stirring flange and flange-type connections. Jacketed klopper lower bottom with inner coil and bottom discharge. On 4 brackets. General characteristics: Material Stainless steel Technical characteristics: Capacity 16.000 litros totales Bottom type Klopper Camisa En el fondo inferior On 4 brackets Ears x2 Man hole x1 Peepholes x2 Vessel outside diameter 2500 mm Vessel height 2750 mm Vessel height + funds (TOTAL: 4400 mm)

Hanselifter E-MES150-15-05 Electric Box Lifter Minilift 150kg 0.15 kW 2x12V Excellent maneuverability for tight spaces Electronic height change of the platform Operating terminal for easy handling when lifting and lowering Increased safety thanks to approx. one and a half metre supply cable and an integrated charger with overload protection Charging possible at any standard socket With parking brakes on both swivel castors Dimensions L x W x H: 870 x 600 x 1790 mm Drive type: semi-electric Overall height: 1790 mm Tyres: polyurethane Ground clearance: 70 mm Net weight: 66 kg Fork length: 475 mm Lifting speed: 50 mm/s Lifting height: 1500 mm Load center of gravity: 230 mm Platform height max.: 1500 mm Platform dimensions L x W mm: 475 x 600 mm Wheelbase: 680 mm Load capacity: 150 kg Turning radius: 850 mm You can find more box jacks - new and used - in our shop! ...

Lifting jack, swivel jack, lifting jack, shackle, load lifter, lashing eye, lashing, anchor point, lifting jack thread -Load racks: 6 pieces, 450 mm height -Base plate: 450 x 350 x 20 mm -Shäkel plate: 146 x 146 mm, M42 2 pieces with shäkel -Price: complete -Dimensions: 450/350 / H450 mm -Weight: 60 kg / pc.

TECHNICAL SPECIFICATIONS Manufacturer: BROWN LENOX Designation: KUE KEN Jaw Crusher Type: 106 Design: Double toggle jaw crusher Year of construction: 1982 Inlet opening (width/depth): 1065 x 305 mm Gap width: 38 - 75 mm Throughput: 65 - 110 t/h Maximum feed size: 240 mm Drive power: 55 kW Crushing speed: 300 - 350 rpm Total weight: 10,200 kg SPECIFIC COMMENT - Solid crusher construction with steel support

diameter: 400 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 1 piece 3-jaw power chuck make FORKARDT type 3WF 400 K15 S23 Ø 400 mm with centrifugal force compensation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Roll Jaws, Floating Center Jaws, Pull-Down Jaws, Machine Vise Jaws -Ground steel jaws: 160 mm -Hole spacing: 100 mm -Price: per piece -Number: 6 pieces -Dimensions: 160/20/H50 mm -Weight: 1.1 kg/piece

Roll jaws, floating center jaws, pull-down jaws, machine vice jaws, reversible jaws -Ground reversible jaws: 135 mm -Hole spacing: 80 mm/groove: 3 mm -Price: per piece -Number: 4 pieces -Dimensions: 135/16/H40 mm -Weight: 0.6 kg/piece

Roll Jaws, Floating Center Jaws, Pull-Down Jaws, Machine Vise Jaws -Ground steel jaw: 200 mm -Hole spacing: 140 mm/Ø 10 mm -Dimensions: 202/18/H75 mm -Weight: 2.1 kg

6000 l container made of V2A double jacket for sale from location Very good condition, straight from production!

Precision three-jaw chuck, chuck, face plate, 3-jaw chuck -Chuck size: Ø 192 mm -Beeks: individually and completely adjustable -Passage: Ø 51 mm -Weight: 14.5 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws -Top jaws: for power chucks, 15-piece set: soft jaws -Hole spacing: 44 mm -Width: 28 mm -Various versions available: see photos, more pictures can be sent upon request -Price/Sale: only complete set -Overall dimensions: 470/180/H80 mm -Weight: 8.3 kg

Interchangeable jaws, top jaws, three-jaw chucks, clamping jaws, step block jaws -Top jaws: soft clamping jaws 1 set = 3 pieces -Hole spacing: 54 mm -Width: 45 mm -Dimensions: 135/120/H30 mm -Weight: 0.9 kg

Interchangeable jaws, top jaws, three-jaw chucks, clamping jaws, step block jaws -Top jaws: soft clamping jaws 1 set = 3 pieces -Hole spacing: 40 mm -Width: 30 mm -Dimensions: 120/90/H80 mm -Weight: 3.4 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws -Manufacturer: SMW Autoblok, top jaws for power chucks 2 sets -Type: 012494 WAK 400-10, see photos -Hole spacing: 54 mm -Width: 34 mm -Price/sale: only complete -Dimensions: 170/190/H80 mm -Weight: 7.9 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws -Manufacturer: Schunk, Top jaws for power chucks, 3 sets -Type: SFA-AL 315, see photos -Hole spacing: 54 mm -Price/Sale: only complete set -Overall dimensions: 160/215/H90 mm -Weight: 6.8 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws -Top jaws: for power chucks -1 set: soft jaws, aluminum -Hole spacing: 54 mm -Dimensions: 160/190/H110 mm -Weight: 3,3 kg

Ref. -No.: 10055 Manufacturer: SCHUNK Storage location: Mülheim an der Ruhr Country of origin: Deutschland outer diameter: 250 mm Inside diameter: 80 mm

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws -Top jaws: for power chucks -2 set: soft jaws, aluminum -Hole spacing: 54 mm -Price/sale: only complete -Dimensions: 135/170/H80 mm -Weight: 1.8 kg

Interchangeable jaws, top jaws, three-jaw chucks, clamping jaws -Manufacturer: Schunk, soft top jaws 1 set = 3 pieces -Type: SWB-FR 131 -Dimension box: 75/90/H50 mm -Weight: 1.1 kg

Roll Jaws, Floating Center Jaws, Pull-Down Jaws, Machine Vise Jaws -Ground steel jaws: 160 mm -Hole spacing: 100 mm/groove: 3 mm -Price: per piece -Number: 3 pieces -Dimensions: 160/14/H50 mm -Weight: 0.8 kg/piece

3 jaw grippers with return spring, 52.81.1. 631, Fibro, mint condition Special price If you have a VAT number, we will gladly issue you an invoice without VAT. 3 jaw grippers with return spring, 52.81.1. 631, Fibro, as good as new - with internal closing return spring - pneumatic - gripping distance per finger 6mm Mint condition The part was purchased from a company's spare parts warehouse, has never been used and is in mint condition. Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the seller, the goods can be returned within 2 weeks. We will refund the buyer only the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improvement, exchange, subsequent delivery or a ...

Roll jaws, floating central jaws, pull-down jaws, machine vice jaws, clamping jaws -Prisms: 90° -2x thread: M16 -Price: per piece -Number: 2 pieces -Dimensions: 250/40/H115 mm -Weight: 6.2 kg/piece

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws -Top jaws: for power chucks -1 set: soft jaws, aluminum -Hole spacing: 54 mm -Dimensions: 180/200/H90 mm -Weight: 3 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws -Top jaws: for power chucks -4 set: soft jaws, aluminum -1 movement: hard jaws -Hole spacing: 54 mm -Price/sale: only complete -Dimensions: 310/390/H110 mm -Weight: 18.7 kg

Roll Jaws, Floating Center Jaws, Pull-Down Jaws, Machine Vise Jaws -Ground steel jaws: 200 mm -Hole spacing: 140 mm -Price: per piece -Number: 3 pieces -Dimensions: 200/15/H65 mm -Weight: 1.5 kg/piece

Roll Jaws, Floating Center Jaws, Pull-Down Jaws, Machine Vise Jaws -Steel jaw: 200 mm -Hole spacing: 140 mm/Ø 11 mm -Dimensions: 200/18/H65 mm -Weight: 1.8 kg

Roll jaws, floating central jaws, pull-down jaws, machine vice jaws, clamping jaws -Pull-down jaws: with magnet -Interior dimensions: 140/160 mm -Groove width: 8 mm -Price: per piece -Number: 2 pieces -Dimensions: 200/30/H100 mm -Weight: 3.1 kg/piece

diameter: 250 mm total power requirement: kW weight of the machine ca.: 0,05 t dimensions of the machine ca.: m 1 pc. three jaws chuck - diameter 250 mm bore 80 mm fastening: 4 pcs screws 135 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Roll jaws, floating central jaws, pull-down jaws, machine vice jaws, clamping jaws -1 piece: pull-down jaw -Interior dimensions: 140/160 mm -Groove width: 8 mm -Dimensions: 200/30/H100 mm -Weight: 3.2 kg

Three-jaw chuck, three-jaw lathe chuck -Three-jaw chuck: from a Meuselwitz lathe, chuck size 315 mm diameter -Passage: Ø 103 mm / Cone Ø 120 mm -Bolt circle: Ø 190 mm -Weight: 49 kg

Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 225 mm -Feed flange: M55x4 -Tip: 57 mm -Passage: Ø 50 mm -one sentence: hard-hitting jaws -Weight: 20 kg

Four-jaw chuck, four-jaw lathe chuck -Chuck size: Ø 250 mm -Bolt circle: Ø 230 mm -Recess:Ø 210 mm -Passage: Ø 80 mm -Scope of delivery: as per pictures, without additional jaws -Weight: 19 kg

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 200 mm -Recess: Ø 160 mm -Bolt circle: Ø 180 mm -Passage: Ø 55 mm -Weight: 14 kg

three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 240 mm -Short taper holder: Short taper 6 Ø 105 -Passage: Ø 77 mm -one set: hard interchangeable jaws -Weight: 28 kg

Thread cutting head with chaser jaws, thread cutting stock, thread cutting machine, pipe thread cutter -Inch thread: 1/4 - 1 inch -Dimensions: 550/120/100 mm -Weight: 4.7 kg

diameter: 250 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 1 pc. three-jaws chuck - diameter 250 mm bore 75 mm with flange plate for mounting on milling table 0320 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: 315 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 0,1 m bore 75 mm KK 140 4 pcs. fastening screws 173 / M 6 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Thread cutting head with chaser jaws, thread cutting stock, thread cutting machine, pipe thread cutter -Inch thread: 1/4 - 1 inch -Dimensions: 385/120/110 mm -Weight: 5.1 kg

Thread cutting head with chaser jaws, thread cutting stock, thread cutting machine, pipe thread cutter -Inch thread: 1 -2 inches -Dimensions: 640/160/H130 mm -Weight: 8.7 kg

diameter: 250 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 1 pc. four jaw chuck - diameter 250 mm bore 75 mm KK 140 fastening: 4 pcs. screws M 16 / 170 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 240 mm -without: interchangeable jaws -Conical mounting type: Ø 102 mm -Weight: 29 kg

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 200 mm -Short cone mount for: bayonet disc attachment -Cone size: 6 -Cone: Ø 106 mm -Bolt circle: Ø 133.4 mm -Through hole: Ø 54 mm -Weight: 15 kg

three-jaw chuck, three-jaw lathe chuck -Handover: in current condition as viewed -Short cone: has been shortened -Chuck size: Ø 200 mm -Through hole: Ø 54 mm -Hole: cone Ø 104.5 mm -as per pictures, without additional accessories -Weight 14.4 kg

three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 250 mm -Cone: Short cone 8 Ø 139 mm -Bolt circle: Ø 170 mm -Through hole: Ø 80 mm -Weight: 24 kg

Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 250 mm -Passage: Ø 80 mm -Weight: 19 kg

Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 250 mm -Passage: Ø 75 mm -Weight: 21.5 kg

Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 250 mm -Passage: Ø 80 mm -Weight: 19 kg