ja used for sale

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, hard -Jaw width: 24 mm -Dimensions: see photo technical drawing -Number: 2 sets of interchangeable jaws available -Price: per set -Dimensions total: 90/70/H65 mm / 90/72/H67 mm -Total weight: 2.2 kg/set

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: for three-jaw lathe chucks, hard -Jaw width: 50 mm -Grid: 1/16 -Dimensions: see photo technical drawing -Dimensions total: 110/150/H55 mm -Total weight: 3.5 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, soft -Jaw width: 20 mm -Dimensions: see photo technical drawing -Total dimensions: 66/60/H44 mm -Total weight: 1.0 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, hard -Jaw width: 20 mm -Dimensions: see photo technical drawing -Total dimensions: 90/60/H62 mm -Total weight: 1,6 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, soft -Jaw width: 20 mm -Dimensions: see photo technical drawing -Total dimensions: 70/60/H55 mm -Total weight: 1.5 kg

Screw jack, linear drive, linear gear, lifting gear, screw jack, spindle drive, electric actuator, valve drive, actuator, servomotor, screw jack, lifting drive -Spindle lifting gear: from double mitre saw elumatec DG 204 -Manufacturer gearbox: Atlanta, type 539 05 040 i 4 -Engine manufacturer: SEM, type DPM30E4 36 V 0.18 kW -Dimensions: 450/320/H130mm -Weight: 9.5 kg

Four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck -Manufacturer: Röhm, four-jaw chuck Ø 200 mm -Passage: Ø 55 mm -Bolt circle: Ø 133 mm -Mounting: Short taper 6 / cone 103 - 105 mm short taper flange with Camlock fastening -Accessories: incl. 2 sets of interchangeable jaws and clamping tool -Dimensions: Ø200 x 185 mm -Weight: 24 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks -Top jaws: soft top jaws for key bar chucks, helical toothed -Jaw width: 22 mm -Dimensions: see photo technical drawing -Total dimensions: 120/65/H70 mm -Total weight: 2.9 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks -Top jaws: soft top jaws for key bar chucks, helical toothed -Jaw width: 22 mm -Dimensions: see photo technical drawing -Total dimensions: 105/67/H72 mm -Total weight: 2.9 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 20 mm -Dimensions: see photo technical drawing -Quantity: 1 set of interchangeable jaws available Price: per set -Overall dimensions: 70/60/H55 mm / 70/60/H54 mm Total weight: 1.1 kg/set

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, soft -Jaw width: 20 mm -Dimensions: see photo technical drawing -Total dimensions: 70/60/H50 mm -Total weight: 1.3 kg

Screw jack, linear drive, linear gear, lifting gear, screw jack, spindle drive, valve drive, actuator, lifting drive, trapezoidal thread spindle -Manufacturer: Staff, screw jack -Type: Size 05 Version A -Useful stroke: 200 mm -Trapezoidal thread spindle: Ø 18 mm -Dimensions: 120/830/H315 mm -Weight: 2.2 kg

Screw jack, linear drive, linear gear, lifting gear, screw jack, spindle drive, valve drive, actuator, lifting drive, trapezoidal thread spindle -Screw jack: stroke 115 mm -Tooth rack Ø 30 mm -Spindle: Ø 24 mm -Dimensions: 770/270/H105mm -Weight: 9.2 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, hard -Jaw width: 20 mm -Dimensions: see photo technical drawing -Number: 2 sets of interchangeable jaws available -Price: per set -Dimensions total: 70/60/H54 mm / 69/60/H54 -Total weight: 1.1 kg/set

Three-jaw chuck, three-jaw lathe chuck -Three-jaw chuck: chuck size Ø 250 mm -Passage: Ø 80 mm -Clamping plate: Ø 305/60 mm -Bolt circle: Ø 280 mm -Weight: 37 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks -Top jaws: soft top jaws for key bar chucks, helical toothed -Jaw width: 22 mm -Dimensions: see photo technical drawing -matching key bar chuck: ID12273 -Dimensions total: 90/70/H68 mm -Total weight: 2.1 kg

three-jaw chuck, three-jaw lathe chuck -Manufacturer: Bergmans, three-jaw chuck type 4110 chuck size Ø 255 mm -Passage: Ø 65 mm -Bolt circle: Ø 140 mm / M12 -Dimensions: Ø 255 x 140 mm -Weight: 31 kg

three-jaw chuck, three-jaw lathe chuck -Manufacturer: SCA Skand Chuckfabriks, precision three-jaw chuck chuck size Ø 230 mm -Jaws: individually and fully adjustable -Passage: Ø 66 mm -Bolt circle: Ø 193 mm / M12 -Dimensions: Ø 230 x 130 mm -Weight: 21.2 kg

three-jaw chuck, three-jaw lathe chuck -Three-jaw chuck: chuck size Ø 190 mm -Passage: Ø 54 mm -Bolt circle: Ø 174 mm / M10 -Dimensions: Ø 190 x 110 mm -Weight: 11.2 kg

three-jaw chuck, three-jaw lathe chuck -Manufacturer: SCA Skand Chuckfabriks, three-jaw chuck chuck size Ø 110 mm -Passage: Ø 25 mm -Bolt circle: mm -Dimensions: Ø 110 x 115 mm -Weight: 4.8 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, hard -Jaw width: 38 mm -Dimensions: see photo technical drawing -Dimensions total: 102/115/H88 mm -Total weight: 5.6 kg

Machine vice, clamping claws, clamping jaws, stable clamping jaw, stable clamping jaw, pull-down clamp -Manufacturer: WILA, stable clamping jaw height adjustable -Clamping jaw: 120 x 45 mm -Clamping height: 85 - 105 mm -Groove width: 28 mm -Dimensions: 240/120/H90 mm -Weight: 10.6 kg

Pressing pliers, pressing machine, pressing jaws, pressing tools, pressing rings -Manufacturer: Roller, pressing pliers pressing jaws pressing rings set -Sizes: M15, M22, M28, Z1 -Individual components: see photos -Dimensions case: 410/220/H65 mm -Weight: 4.7 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: 4-piece rotary jaw set, 3 sets -Jaw width: 34 mm -Dimensions: see photo technical drawing -Price/Sale: only complete -Total dimensions: 410/130/H80 mm -Total weight: 21.3 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Manufacturer: Röhm, top jaws jaw set for three-jaw lathe chuck, hard -Jaw width: 18 mm -Dimensions: see photo technical drawing -Dimensions total: 61/54/H47 mm -Total weight: 0.7 kg

Machine vice, clamping claws, clamping jaws, stable clamping jaw, stable clamping jaw, clamping claws, pull-down clamp, pull-down jaw, side clamp -Manufacturer: Lenzkes, clamping claw clamping jaw -Type: Backe 3 JSG -Clamping jaw: 100 x 50 mm -Clamping height: max. 210 mm -Groove width: 32 mm -Dimensions: 255/100/H120 mm -Weight: 10.7 kg

Machine vice, clamping claws, clamping jaws, stable clamping jaw, stable clamping jaw, clamping claws, pull-down clamp, pull-down jaw, side clamp -Stable clamping jaw: Stable clamping jaw height adjustable -Clamping jaw: 120 x 30 mm -Clamping height: max. 225 mm -Groove width: 25 mm -Number: 4x clamping jaws available -Price: per piece -Dimensions: 240/120/H130 mm -Weight: 15.1 kg/piece

three-jaw chuck, three-jaw lathe chuck -Manufacturer: AROWA, three-jaw chuck chuck size Ø 250 mm -Passage: Ø 76 mm -Bolt circle: Ø 223 mm -Dimensions: Ø250 x 125 mm -Weight: 22 kg

load jack, swivel jack, lifting jack, shackle, load jack, lashing eye, lashing ring, attachment point, load jack thread, lashing point -Manufacturer.RUD, load jack with foldable rotating load bracket 7 pieces -Load bracket: type VLBG 15 t M 42 -Base plate: 280 x 190 mm -Hole spacing: 220/140 x Ø17 mm, see photos -Delivery/Price: complete -Dimensions 280/190/H315 mm each -Weight: 31 kg/piece

four-jaw chuck, 4-jaw chuck -Four-jaw chuck: chuck size Ø 310 mm -Passage: Ø 98 mm -Bolt circle: Ø 290 mm -Jaw width: 26 mm / interchangeable jaws not included -Dimensions: Ø 310 x 90 mm -Weight: 24 kg

four-jaw chuck, 4-jaw chuck -Four-jaw chuck: chuck size Ø 190 mm -Passage: Ø 57 mm -Bolt circle: Ø 170 mm / M10 -Jaw width: 20 mm / interchangeable jaws not included -Dimensions: Ø 190 x 70 mm -Weight: 8.5 kg

Rolling jaws, floating center jaws, pull-down jaws, machine vice jaws -Clamping jaws: 2 pieces ground steel jaws width 160 mm -Hole spacing: 100 mm / Ø 11 mm -Shipping/Price: complete -Transport dimensions: 160/65/36 mm -Total weight: 2.8 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, soft -Jaw width: 20 mm -Dimensions: see photo technical drawing -Total dimensions: 67/60/H41 mm -Total weight: 1.0 kg

load jack, swivel jack, lifting jack, shackle, load jack, lashing eye, lashing ring, attachment point, load jack thread, lashing point -Manufacturer.RUD, load jack with foldable rotating load bracket 4 pieces -Load bracket:Type VLBG 5 t M 30 -Base plate: 280 x 190 mm -Hole spacing: 220/140 x Ø17 mm, see photos -Delivery/Price: complete -Dimensions 280/190/H280 mm each -Weight: 25 kg/piece

Screw jack, linear drive, linear gear, jack, screw jack element, spindle drive, valve drive, actuator, lifting drive, trapezoidal thread spindle -Manufacturer: Pfaff silver blue, screw jack -Type: SHE 2.5 -Useful stroke: 200 mm -Shaft: Ø 16 x 40 mm on both sides -Spindle head: bore Ø 25 mm -Dimensions: 465/190/H165 mm -Weight: 10.1 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, soft -Jaw width: 20 mm -Dimensions: see photo technical drawing -Total dimensions: 65/60/H46 mm -Total weight: 1.1 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, soft -Jaw width: 20 mm -Dimensions: see photo technical drawing -Total dimensions: 65/60/H46 mm -Total weight: 1.1 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, soft -Jaw width: 20 mm -Dimensions: see photo technical drawing -Total dimensions: 62/60/H42 mm -Total weight: 1.1 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, soft -Jaw width: 20 mm -Dimensions: see photo technical drawing -Total dimensions: 65/60/H48 mm -Total weight: 1.0 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 20 mm -Dimensions: see photo technical. drawing -Total dimensions: 85/66/H62 mm -Total weight: 1.7 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws -Interchangeable jaws: 3-piece soft top jaw set -Width: 20 mm -Dimensions total: 84/63/H38 mm -Total weight: 1.1 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws -Interchangeable jaws: 3-piece soft top jaw set -Width: 20 mm -Dimensions total: 80/63/H38 mm -Total weight: 1.1 kg

Four jaw chuck, four jaw lathe chuck, 4 jaw chuck -Manufacturer: AROWA, four-jaw chuck No. 4 chuck size Ø 138 mm -Passage: Ø 37 mm -Bolt circle: Ø 120 mm -Dimensions: Ø197 x 110 mm -Weight: 11 kg

Three-jaw chuck, three-jaw lathe chuck -Manufacturer: AROWA, three-jaw chuck chuck size Ø 200 mm -Passage: Ø 55 mm -Bolt circle: Ø 175 mm / M10 -Accessories: incl. 2nd set of interchangeable jaws -Dimensions: Ø200 x 105 mm -Weight: 13.8 kg

Three-jaw chuck, three-jaw lathe chuck -Manufacturer: Röhm, three-jaw chuck holder MK4 -Chuck size: Ø 100 mm -Passage: Ø 20 mm -Dimensions: Ø 100 x 200 mm -Weight: 3.8 kg

Three-jaw chuck, three-jaw lathe chuck -Manufacturer: TOS, three-jaw chuck chuck size Ø 125 mm -Passage: Ø 35 mm -Bolt circle: Ø 108 mm -Accessories: incl. 2nd set of interchangeable jaws -Dimensions: Ø125 x 70 mm -Weight: 4.1 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks -Top jaws: 6 sets of top jaws for key bar chucks, helical toothed -Jaw width: 26 mm -Dimensions: see photo technical drawing -Shipping/Price: complete -Dimensions total: 285/240/H85 mm -Total weight: 24.4 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks -Top jaws: hard top jaws for key bar chucks, helical toothed -Jaw width: 22 mm -Dimensions: see photo technical drawing -Dimensions total: 95/65/H70 mm -Total weight: 2.1 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws -Interchangeable jaws: 3-piece soft top jaw set -Width: 30 mm -Dimensions total: 110/90/H35 mm -Total weight: 1.5 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws -Interchangeable jaws: 3-piece soft top jaw set -Width: 30 mm -Dimensions total: 125/90/H55 mm -Total weight: 3.7 kg