ja used for sale

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, soft -Jaw width: 18 mm -Dimensions: see photo technical drawing -Total dimensions: 60/55/H40 mm -Total weight: 0,7 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, hard -Jaw width: 19 mm -Dimensions: see photo technical drawing -Total dimensions: 70/55/H45 mm -Total weight: 0,9 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 21 mm -Dimensions: see photo technical. drawing -Total dimensions: 75/65/H55 mm -Total weight: 1.2 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Manufacturer: Rohm, base jaws for four-jaw chuck 2 set -Type: ID.: 107546 jaw width 20 mm -Dimensions: see photo techn. drawing -1 set: with soft top jaws, width 30mm -Price/sale: only complete -Dimensions: 200/90/H70 mm -Weight: 4.7 kg

Mobile motor jack crane, mobile pillar jib cranes, mobile pillar jib crane, assembly cranes, assembly cranes, workshop cranes, workshop cranes, pillar jib cranes, indoor cranes, workplace cranes -Transportable engine jack -incl.: manual trolley -with: cable -Load capacity: kg -Projection: 2,000 mm -Total height: max. 2,850 mm -Number: 1x available -Price: per piece -Transport dimensions: 1640/1515/H1585 mm -Own weight: 190 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws -Manufacturer: Fabryka Przyrzadow, 3-piece soft top jaw set -Type: PUTm-M 200 -Width: 25 mm -Number: 5x jaw sets available -Price per piece -Dimensions carton: 80/90 / H75 mm -Total weight: 2.3 kg / set

Lifting platform, car lifting platform, lifting device, lifting lift, pit jack, axle free jack, truck lifting device, axle jack -Manufacturer: MWH Märkisches Werk Halver, truck lifting device pit jack -Type: Atlas LT -Load capacity: 2x 5000 kg -Lifting height: 1600 mm -Operating pressure: 60 bar -Accessories: included, see photos -Transport dimensions: 1000/940/H1400 mm -Total weight: 820 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Rotary jaw set for four-jaw chuck, hard -Jaw width: 32 mm -Dimensions: see photo technical drawing -Overall dimensions: 125/130/H70 mm -Total weight: 5.4 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws -Interchangeable jaws: 3-piece soft jaw set -Width: 20mm -Total dimensions: 84/60/H40 mm -Total weight: 1.1 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: for three-jaw lathe chucks, soft -Jaw width: 20 mm -Dimensions: see photos -Total dimensions: 85/60/H40 mm -Total weight: 1.0 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: for three-jaw lathe chucks, soft -Jaw width: 22 mm -Dimensions: see photos -Total dimensions: 105/66/H45 mm -Total weight: 1.7 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Rotary jaw set for power chucks, 4 sets -Dimensions: see photo technical drawing -Price/Fee: complete -Overall dimensions: 330/230/H105 mm -Total weight: 27.5 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Rotary jaw set for four-jaw chuck, hard -Jaw width: 18 mm -Dimensions: see photo techn. drawing -Quantity: 2x set of interchangeable jaws available -Price: per set -Total dimensions: 61/72/H48 mm -Total weight: 1.0 kg/pc.

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 20 mm -Dimensions: see photo technical drawing -Quantity: 2 sets of interchangeable jaws available Price: per set -Overall dimensions: 70/60/H54 mm Total weight: 1.1 kg/set

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 16 mm -Dimensions: see photo technical. drawing -Quantity: 2x set of interchangeable jaws available -Price: per set -Total dimensions: 55/48/H40 mm -Total weight: 0.5 kg/set

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 14 mm -Dimensions: see photo technical. drawing -Quantity: 2 sets of interchangeable jaws available -Price: per set -Total dimensions: 48/42/H35 mm -Total weight: 0.3 kg/set

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, soft -Jaw width: 20 mm -Dimensions: see photo technical drawing -Total dimensions: 70/60/H55 mm -Total weight: 1.5 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, soft -Jaw width: 20 mm -Dimensions: see photo technical drawing -Total dimensions: 70/60/H55 mm -Total weight: 1.5 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, soft -Jaw width: 20 mm -Dimensions: see photo technical drawing -Total dimensions: 60/60/H55 mm -Total weight: 1.2 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Rotary jaw set for four-jaw chuck, hard -Jaw width: 34 mm -Dimensions: see photo technical drawing -Overall dimensions: 130/136/H80 mm -Total weight: 7.0 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: rotating jaw set for four-jaw chucks, soft -Jaw width: 34 mm -Dimensions: see photo technical. drawing -Total dimensions: 140/140/H100 mm -Total weight: 8.8 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 18 mm -Quantity: 2 sets of interchangeable jaws available -Price: per set -Overall dimensions: 64/54/H46 mm Total weight: 0.8 kg/set

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, hard -Jaw width: 26 mm -Dimensions: see photo technical drawing -Number: 1 set of interchangeable jaws available -Dimensions total: 78/78/H75 mm -Total weight: 2.5 kg/set

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Turning jaw set, 4-piece, hard -Jaw width: 24 mm -Dimensions: see photo techn. drawing -Quantity: 2 sets of interchangeable jaws available -Price: per set -Dimensions: 92/97/H67 mm / 90/100/H70 mm -Total weight: 2.9 kg/set

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: 4-piece hard rotating jaw set -Jaw width: 21 mm -Dimensions: see photo technical. drawing -Quantity: 2 sets of interchangeable jaws available -Price: per set -Total dimensions: 76/85/H53 mm / 77/85/H51 mm -Total weight: 1.6 kg / 1.5 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, soft -Jaw width: 20 mm -Dimensions: see photo technical drawing -Total dimensions: 65/60/H50 mm -Total weight: 1.2 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, soft -Jaw width: 20 mm -Dimensions: see photo technical drawing -Total dimensions: 65/60/H45 mm -Total weight: 1.1 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, soft -Jaw width: 20 mm -Dimensions: see photo technical drawing -Total dimensions: 65/60/H50 mm -Total weight: 1.3 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chucks, soft -Jaw width: 20 mm -Dimensions: see photo technical. drawing -Quantity: 3 sets of interchangeable jaws available -Price: per set -Total dimensions: 90/90/H70 mm / 87/90/H65 mm -Total weight: 2.7 kg/ 2.8 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Rotary jaw set for four-jaw chuck, hard -Jaw width: 18 mm -Dimensions: see photo techn. drawing -Quantity: 1x set of interchangeable jaws available -Total dimensions: 61/72/H47 mm -Total weight: 0,9 kg/pc.

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 16 mm -Dimensions: see photo technical. drawing -Quantity: 1x set of interchangeable jaws available -Total dimensions: 52/49/H41 mm -Weight: 0.4kg/set

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: 4-piece hard rotating jaw set -Jaw width: 21 mm -Dimensions: see photo technical. drawing -Quantity: 1 set of interchangeable jaws available -Total dimensions: 76/85/H60 mm -Total weight: 1.8 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, hard -Jaw width: 27 mm -Dimensions: see photo technical drawing -Number: 1 set of interchangeable jaws available -Price: per set -Dimensions total: 90/80/H65 mm -Total weight: 2.4 kg/set

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws power chucks -Top jaws: soft top jaws for wedge bar chucks, helical teeth -Jaw width: 22 mm -Dimensions: see photo technical. drawing -Total dimensions: 100/65/H75 mm -Total weight: 2.9 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, soft -Jaw width: 20 mm -Dimensions: see photo technical drawing -Total dimensions: 65/60/H50 mm -Total weight: 1.3 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, hard -Jaw width: 20 mm -Dimensions: see photo technical drawing -Total dimensions: 70/60/H55 mm -Total weight: 1.1 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, soft -Jaw width: 20 mm -Dimensions: see photo technical drawing -Total dimensions: 66/60/H44 mm -Total weight: 1.0 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: 4-piece hard rotating jaw set -Jaw width: 26 mm -Dimensions: see photo technical. drawing -Quantity: 1 set of interchangeable jaws available -Total dimensions: 76/85/H60 mm -Total weight: 2,3 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws power chucks -Top jaws: soft top jaws for wedge bar chucks, helical teeth -Jaw width: 22 mm -Dimensions: see photo technical. drawing -Total dimensions: 100/65/H60 mm -Total weight: 1,8 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws power chucks -Top jaws: soft top jaws for wedge bar chucks, helical teeth -Jaw width: 22 mm -Dimensions: see photo technical. drawing -Total dimensions: 95/70/H70 mm -Total weight: 2.7 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws power chucks -Top jaws: soft top jaws for wedge bar chucks, helical teeth -Jaw width: 22 mm -Dimensions: see photo technical. drawing -Total dimensions: 100/65/H65 mm -Total weight: 2.3 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, hard -Jaw width: 20 mm -Dimensions: see photo technical drawing -Total dimensions: 90/60/H62 mm -Total weight: 1,6 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, soft -Jaw width: 20 mm -Dimensions: see photo technical drawing -Total dimensions: 70/60/H55 mm -Total weight: 1.5 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, soft -Jaw width: 20 mm -Dimensions: see photo technical drawing -Total dimensions: 70/60/H50 mm -Total weight: 1.3 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws power chucks -Top jaws: soft top jaws for wedge bar chucks, helical teeth -Jaw width: 22 mm -Dimensions: see photo technical. drawing -Total dimensions: 100/65/H60 mm -Total weight: 2.1 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws power chucks -Top jaws: soft top jaws for wedge bar chucks, helical teeth -Jaw width: 22 mm -Dimensions: see photo technical. drawing -Total dimensions: 90/65/H50 mm -Total weight: 1,6 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws power chucks -Top jaws: soft top jaws for wedge bar chucks, helical teeth -Jaw width: 22 mm -Dimensions: see photo technical. drawing -Total dimensions: 105/75/H60 mm -Total weight: 2,5 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws power chucks -Top jaws: soft top jaws for wedge bar chucks, helical teeth -Jaw width: 22 mm -Dimensions: see photo technical. drawing -Total dimensions: 90/70/H60 mm -Total weight: 2,1 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws power chucks -Top jaws: soft top jaws for wedge bar chucks, helical teeth -Jaw width: 20 mm -Dimensions: see photo technical. drawing -Total dimensions: 80/60/H45 mm -Total weight: 1,5 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws power chucks -Top jaws: soft top jaws for wedge bar chucks, helical teeth -Jaw width: 22 mm -Dimensions: see photo technical. drawing -Total dimensions: 110/70/H60 mm -Total weight: 2.0 kg