ja used for sale

Lift lifter, Expresso, Lift&Drive 85 – used - : Special price for pick-up by Friday, 30.1.2026! Prices from location: 950.-€ (net) Manufacturer: Expresso Type: Lift&Drive 85 Year of manufacture: unknown Load capacity: 70kg Charging voltage: 230V, 50Hz Battery voltage: 18V/AH Rating: good Available: immediately Location: Waltrop

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chucks -Jaw width: 27 mm -Dimensions: see photo technical. drawing -Total dimensions: 94/120/H76 mm -Total weight: 3,2 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 34 mm -Dimensions: see photo technical. drawing -Total dimensions: 131/102/H80 mm -Total weight: 5,4 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 21 mm -Dimensions: see photo technical. drawing -Total dimensions: 75/64/H60 mm -Total weight: 1.4 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Rotary jaw set for four-jaw chuck, hard -Jaw width: 20 mm -Dimensions: see photo techn. drawing -Total dimensions: 70/80/H53 mm -Total weight: 1.6 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Turning jaw set, 4-piece, hard -Jaw width: 24 mm -Dimensions: see photo techn. drawing -Dimensions: 90/96/H68 mm -Total weight: 2.7 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 34 mm -Dimensions: see photo technical. drawing -Total dimensions: 130/100/H80 mm -Total weight: 5.4 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chucks -Jaw width: 21 mm -Dimensions: see photo technical. drawing -Total dimensions: 80/63/H67 mm -Total weight: 2,1 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 20 mm -Dimensions: see photo technical. drawing -Total dimensions: 51/60/H40 mm -Total weight: 0,6 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chucks, soft -Jaw width: 28 mm -Dimensions: see photo technical. drawing -Total dimensions: 104/110/H83 mm -Total weight: 5.2 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 15 mm -Dimensions: see photo technical. drawing -Total dimensions: 55/45/H42 mm -Total weight: 0.5 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 32 mm -Dimensions: see photo technical. drawing -Total dimensions: 125/96/H73 mm -Total weight: 4.1 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chucks, soft -Jaw width: 26 mm -Dimensions: see photo technical. drawing -Total dimensions: 87/76/H54 mm -Total weight: 1.8 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chucks, soft -Jaw width: 26 mm -Dimensions: see photo technical. drawing -Total dimensions: 83/77/H53 mm -Total weight: 1.8 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chucks, soft -Jaw width: 26 mm -Dimensions: see photo technical. drawing -Total dimensions: 87/79/H55 mm -Total weight: 2,0 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chucks, soft -Jaw width: 26 mm -Dimensions: see photo technical. drawing -Total dimensions: 83/75/H55 mm -Total weight: 2,0 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chucks, soft -Jaw width: 27 mm -Dimensions: see photo technical. drawing -Total dimensions: 105/150/H70 mm -Total weight: 4.0 kg

Stock number: F936, In stock: Yes, Amount in stock: 1 pc., Item: Sliding-weight balance, Construction: Weighing plate L 1570 x W 1800 x H 230 mm, Outer dimensions: L 1570 x W 2000 x H 1150 mm, Weighing area: 1-2.000 kg, Interval: 1,0 kg, Manufacturer: JAC Nielsen & Co.

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 27 mm -Dimensions: see photo technical. drawing -Total dimensions: 90/80/H65 mm -Total weight: 2.4 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chucks, soft -Jaw width: 27 mm -Dimensions: see photo technical. drawing -Total dimensions: 95/80/H125 mm -Total weight: 5.6 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chucks -Jaw width: 22 mm -Dimensions: see photo technical. drawing -Total dimensions: 100/65/H55 mm -Total weight: 2.5 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws -Interchangeable jaws: soft top jaw set, 3 pieces -Width: 30mm -Total dimensions: 95/90/H55 mm -Total weight: 2.2 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws -Interchangeable jaws: 3-piece top jaw set, unstepped -Width: 36mm -Bore: Ø 13 mm -Total dimensions: 160/110/H70 mm -Total weight: 7.7 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws -Interchangeable jaws: 3-piece unstepped top jaw set -Width: 40 mm -Bore: Ø 17 mm -Total dimensions: 140/120/H70 mm -Total weight: 7.0 kg

Used spices in glass jars with grinder production line. Cartoning Machine The UNILINE AU-10-TA-R TF600x400x1500 automatic packaging line consists of: 1.TA-R grouper. 2.TF600x400x1500 tunnel. 3.UNILINE packaging line. Control cabinet containing the control equipment. This machine was designed and built for the production of bulk packaging of a given product. Packaged product types: •Grinder on a 2x3 foil tray with rim. •Grinder on a 2x2 foil tray with rim. •Grinder in 2x3 foil. •Grinder in 2x2 foil. •Grinder in 2x3 foil. •Grill tube in 2x3 foil. Grill tube in 2x2 foil. Sealer The machine consist of: •Feeder •Sleeve applicator head •Guide rollers •Sleeve ejection assembly •Format change kit •Infeed screw mechanism •Feeder assembly •Sleeveless package ejector assembly •Applicator pin assembly Optic check The s ...

Lokotrack LT140 Year of manufacture 1996 Crusher inlet 1400 x 1070 mm Converted to electric drive 200kW Machine in operational condition from a limestone quarry/cement plant 115 tons 4 Transports

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws -Interchangeable jaws: 3-piece top jaw set, unstepped -Type: FWB 315/425 -Width: 36mm -Bore: Ø 13 mm -Total dimensions: 145/110/H62 mm -Total weight: 6.3 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws -Interchangeable jaws: 3-piece top jaw set -Width: 30mm -Bore: Ø 9 mm, distance 38 mm -Total dimensions: 100/90/H50 mm -Total weight: 2.6 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks, soft -Jaw width: 24 mm -Dimensions: see photo technical. drawing -Total dimensions: 110/90/H75 mm -Total weight: 3.4 kg

Three-jaw chuck, three-jaw lathe chuck -Three-jaw chuck: chuck size Ø 130 mm -Passage: Ø 30 mm -Hole circle: Ø 105 mm -Intake: short cone 5 -Weight: 6.9 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, soft -Jaw width: 18 mm -Dimensions: see photo technical drawing -Total dimensions: 60/75/H60 mm -Total weight: 1.4 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, hard -Jaw width: 20 mm -Dimensions: see photo technical drawing -Total dimensions: 60/60/H50 mm -Total weight: 0.8 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, soft -Jaw width: 34 mm -Dimensions: see photo technical drawing -Total dimensions: 135/105/H80 mm -Total weight: 6.6 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, hard -Jaw width: 30 mm -Dimensions: see photo technical drawing -Total dimensions: 130/90/H75 mm -Total weight: 4.3 kg

available from July/August 2026, in operation for 225 and 380 ml jars with TO 58 and 66, The machine is currently operating with nitrogen blanketing (no steam), which drives the oxygen out of the headspace., For sale is a VTB Glass seal machine (Model VM 105 Twist Off) in good, used, and fully functional condition., The machine is currently still in operation and can be inspected at any time by arrangement. It is ideal for the Food industry (e.g., canned foods, sauces, jams) and convinces with its robust stainless steel construction as well as reliable sealing technology., Inline sealing machine for twist-off closures, Integrated Lid sorting for 58 and 66 closures, Gas purging system (optional, usable) for longer shelf life, Pressure rollers for reliable sealing, Transport belt with adjustable side guides, Height adjustment for different glass formats, Operator panel rotatable and swivel ...

Lifting jack, swivel jack, lifting jack, shackle, load lifter, lashing eye, lashing, anchor point, lifting jack thread -Lastbock: with foldable rotatable load bracket -Type / load capacity: see photo -Base plate: 260 x 200 x 20 mm -Tube: 100 x 100 x 210 mm -Bores: Ø 16 mm -Number: 4x load jack available -Price per piece -Weight total: 15 kg / pc.

Lifting jack, swivel jack, lifting jack, shackle, load lifter, lashing eye, lashing, anchor point, lifting jack thread -Lastbock: with foldable rotatable load bracket -Type / load capacity: see photo -Base plate: 260 x 200 x 20 mm -Tube: 100 x 100 x 270 mm -Bores: Ø 16 mm -Number: 4x load jack available -Price per piece -Weight total: 16 kg / pc.

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws -Manufacturer: Holex, soft attachment jaw set, 3-piece, 315 -Type: 313310-315 -Width: 35 mm -Dimensions: see photo technical drawing -Overall dimensions: 145/105/H55 mm -Total weight: 5.2 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: for three-jaw lathe chucks, hard -Jaw width: 20 mm -Dimensions: see photo technical drawing -Total dimensions: 65/60/H50 mm -Total weight: 0.9 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, hard -Jaw width: 18 mm -Dimensions: see photo technical drawing -Total dimensions: 50/55/H35 mm -Total weight: 0,6 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Turning jaw set, 4 pieces, hard, 2 sets -Jaw width: 25 mm -Dimensions: see photo techn. drawing -Price/sale: only complete -Dimensions: 200/90/H55 mm -Total weight: 4.1 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Manufacturer: Rohm, base jaws for four-jaw chuck 2 set -Type: ID.: 107546 jaw width 20 mm -Dimensions: see photo techn. drawing -1 set: with soft top jaws, width 30mm -Price/sale: only complete -Dimensions: 200/90/H70 mm -Weight: 4.7 kg

Mobile motor jack crane, mobile pillar jib cranes, mobile pillar jib crane, assembly cranes, assembly cranes, workshop cranes, workshop cranes, pillar jib cranes, indoor cranes, workplace cranes -Transportable engine jack -incl.: manual trolley -with: cable -Load capacity: kg -Projection: 2,000 mm -Total height: max. 2,850 mm -Number: 1x available -Price: per piece -Transport dimensions: 1640/1515/H1585 mm -Own weight: 190 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws -Manufacturer: Fabryka Przyrzadow, 3-piece soft top jaw set -Type: PUTm-M 200 -Width: 25 mm -Number: 5x jaw sets available -Price per piece -Dimensions carton: 80/90 / H75 mm -Total weight: 2.3 kg / set

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, soft -Jaw width: 18 mm -Dimensions: see photo technical drawing -Total dimensions: 65/55/H30 mm -Total weight: 0,5 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, soft -Jaw width: 18 mm -Dimensions: see photo technical drawing -Overall dimensions: 60/55/H45 mm -Total weight: 0.9 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, soft -Jaw width: 18 mm -Dimensions: see photo technical drawing -Total dimensions: 55/55/H35 mm -Total weight: 0,4 kg

Lifting platform, car lifting platform, lifting device, lifting lift, pit jack, axle free jack, truck lifting device, axle jack -Manufacturer: MWH Märkisches Werk Halver, truck lifting device pit jack -Type: Atlas LT -Load capacity: 2x 5000 kg -Lifting height: 1600 mm -Operating pressure: 60 bar -Accessories: included, see photos -Transport dimensions: 1000/940/H1400 mm -Total weight: 820 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Rotary jaw set for four-jaw chuck, hard -Jaw width: 32 mm -Dimensions: see photo technical drawing -Overall dimensions: 125/130/H70 mm -Total weight: 5.4 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Rotary jaw set for power chucks, 4 sets -Dimensions: see photo technical drawing -Price/Fee: complete -Overall dimensions: 330/230/H105 mm -Total weight: 27.5 kg