j o r used for sale

Maximum pressure 10 Bar ( Reader 10Bar press relief valve) Highest temperature allowed: 120 Celcius Lowest temperature 0 Celcius Internal volume 98 liters Heating Capacity: 63 KW

Premix plant for the production of highly and low carbonated beverages. The technical process steps are: degassing of water, carbonation of water, dosing of fruit juice in a partial stream into the carbonated water. Mixing takes place in the mixing section to the equalising tank. The water used is sterile-filtered in the inlet via two particle filters., Additional title: Intermix system with carbonisation unit, Water output: 22575 l/h, Fruit juice output: 4907 l/h, Operation / Control: Control panel, manual, Material: Lacquered mild steel frame, stainless steel product contacts, Position: Free standing, Base construction: Open frame construction with spherical feet, Features: Deaeration tank, impregnation tank, equalisation tank, CO2 dosage control, internal piping, pumps and fittings, control cabinet 2 trap filters for fine filtration of water in the inlet

2 vertical stainless steel pressure tanks with various fittings. Each mounted on a base frame., Additional title: 2 x tanks, Volume: 1050 l, Max pressure: 3 bar, Temperature: 10 °C, Width: 1,2 m, Height: 1,9 m, Material: stainless steel, Position: horizontal, Base construction: on skirt, Features: 1 manhole and 2 connections on top, 1 side- and 1 bottom-outlet, 1 gas piping, 1 sampling point, All connections with fitting.

Functioning yeast propagation consisting of 3 cylindrical tanks with jacket cooling. 1 tank is additionally equipped with a conical cooling and serves as a pure breeding tank for yeast production., Additional title: Yeast propagation plant with 3 coolable pressure tanks, Capacity: 32 hl, Pressure: 2 bar test pressure 2,6 bar, Width: 1,3 m, Height: 4 m, Weight: 500 kg, Position: vertical, Base construction: on 3 feet, Features: Operating yeast propagation system, every tank with cooling jacket,1 tank with additional cooling jacket for the cone, used as pure culture tank for yeast propagation , Periphery: After consultation we can equip the tank with the desired fittings.

Overview This roll-fed hot glue labelling machine was manufactured by ACMI (Italy). The Opera PRO 400 RF is designed for high-capacity beverage production lines, processing both cylindrical and shaped containers in glass or PET. It applies wrap-around OPP labels at very high speeds, ensuring excellent efficiency and reliability. The machine is equipped with modern features such as automatic label splicing, brushless motor-driven infeed screws, and remote assistance capability. It is currently available for sale. Technical data  Capacity: Nominal 48,000 bph (max. mechanical speed: 58,000 bph) Formats: Cylindrical and shaped containers, PET or glass, e.g. 500 ml PET round bottle (wrap-around OPP label) Machine diameter: 1,320 mm Pitch: 125.60 mm Label type: Roll-fed OPP hot glue wrap-around labels (30–40 µm thickness, 30–175 mm height) Platform rotation: Motorized belt (R version) Ma ...

A compact Optimum bench column drilling machine is available. Motor power: 750W, drilling capacity steel: 25mm, continuous drilling capacity: 20mm, spindle taper: MK2, T-slots: 12mm, table dimensions X/Y: 280mm/245mm, quill stroke: 80mm, throat depth: 180mm, column diameter: 73mm, spindle to drilling table distance: 425mm, spindle to base distance: 618mm, speed: 2440rpm. Machine dimensions X/Y/Z: approx. 660mm/330mm/1020mm, weight: approx. 70kg. Without a drill chuck and drill chuck guard. Documentation available. An on-site inspection is possible.

turning diameter: 420 mm turning length: 650 mm control: Okuma OSP-U100L spindle bore: 95 mm spindle turning speed range: 2800 U/min travel -x axis: 300 mm travel -z axis: 675 mm main drive motor: 22/30 kW weight of the machine ca.: 5,5 t dimensions of the machine ca.: 2700 x 1900 x 1885 mm First put into operation 2001. - 12-station turret (VDI 40) with driven tool stations, 3,000 rpm, 5.5 kW - Internal extraction system by Hengst Filtration (year of manufacture 2023) - Touchsetter, tool measurement - C-axis (main spindle) - Tool breakage and wear monitoring - 3-jaw chuck, Kitagawa B210, Ø250 - Tailstock - Coolant supply, also through the tool - IGF dialog programming - Chip conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0007 : 217 € : 1 : 835 mm mint condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0032 : 228 € : 1 : 835 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dalbo 2,80 METER PAKKER 80 x 80 cm. Ringe

Edge milling machine, edge milling device, chamfering machine, mobile milling machine, weld edge former, weld edge former, weld preparation, weld edge forming machine, deburring device, deburring machine -Edge milling machine: with adjustable speed -Depth adjustment: 0 - 7 mm -Drive: 0.75 kW -Adjustable speed: 0 - 6000 rpm -Angle: 45° -Accessories: Widia milling head -Dimensions: 650/560/H1190 mm -Weight: 94 kg

Housing for 101 plates. Delivery supply: with 2 end plates of stainless steel. Intermediate plates are not included Plates maximum: 100 Plate formats: 400x400 Platefilter features: Manual spindl Dimension? ca. 300x60x100 cm dimensio between the first plate to the spindle ca. 170cm

36 filling valves, working direction: left-right. Machine dimensions: L 3.200 x W 2.500 x H 2.700. Weight: 5.000 kg. filling valves: 36 working direction: left-right weight [kg.]: 5000

filling valves: 24 capacity / hour ca.: 4500 working direction: left-right filling system: vacuum filling Dim. L x W x H [m]: 1,8 x 2 x 2,4 Details: zentrale H?henverstellung 1,80 Breit, 1,80 Tief, 2,50 H?he

filter Plates maximum: 100 Plate formats: 400x400 Platefilter features: Electric-Hydraulic press dimension ca. 300x60x110 cm Distance between first plate and spindle approx ca. 160cm

filling valves: 60 customs no.: 84223000 working direction: right-left (CCW)

mit 50 Platten Plates maximum: 60 Plate formats: 400x400 Platefilter features: Manual spindl dimension ca. 160x60x100 cm Distance between first plate and spindle approx ca. 120cm

Hyraulik press 51x Kunstoffplatten Plate formats: 600x600 Platefilter features: Manual spindl dimension ca. 250x90x130 cm Distance between first plate and spindle approx ca. 90cm

Kieselgur-Frame 600x600 stainless steel Material: AISI 304 suitable for Seitz Orion A60 and B60 40mm complete with 2 plastic shoes gaskets optional Manufacturer part number: Fs 60485

with manual hydraulics and 79x plastic filter plates 1x VA starter plate 1x VA end plate Plates maximum: 150 Plate formats: 600x600 Platefilter features: Manual spindl dimension ca. 380x100x140 cm Distance between first plate and spindle approx ca. 200cm

Plate formats: 400x400 Platefilter features: Manual spindl Details Offered without filterplates. We offer separte filterplates in plastic or stainless steel. Dimension ca. 300x60x100 cm Distance between first plate and spindle approx. 170cm

25 valves Filler Bertolaso for PET and glass (18 mm, hot filling ecologic with HEPA filter) (1998) Capacity: approx. 6000 bph different format parts Optional ID6103 - 24 grippers Rinser Procomac for PET and glas ID6011 - Screw capper Bertolaso 28 mm for PET (Plastic) (1998)?with screw cap feeding

Measuring dimensions X/Y/Z: 400mm/300mm/200mm, measuring accuracy: 2.9+L/100µm, max. workpiece weight: approx. 30kg, machine dimensions X/Y/Z: approx. 1250mm/950mm/1700mm, weight: approx. 900kg. Documentation available. An on-site inspection is possible.

: gebraucht : WA0181 : prompt, Zwischenverkauf v : 1800 € : 1 : 3100 mm : 160 mm : 45 mm mint condition 86° Slightly cranked, planed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working length: 8000 mm working width: 3500 mm Power: 300 A Plasma source: Nertajet type: HP 300 CNC burner heads: 1 1 head Plasma 1 head Autogan The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ceia/OCS check weigher and metal detector with double rejector, OCS checkweigher, type: HC, number: 1006038, year of construction: 2013, weighing range: 60-1450 g, e and d= 0.2 g, maximum 160 per minute, Ceia metal detector, model: T/MS21-350150008, serial number: 21300206043, plastic belt, belt width: 295 mm, clearance: 350 mm x 125 mm, total dimensions: 2220 mm x 1150 mm x 1770 mm.

Locatelli OMK300 + UF 150/220 automatic lathe Turning length 300mm Maximum Bracket 100x100mm Minimum Branch 20×20 Work after the copiers Drill transfer UF 150/220

Locatelli OMK300 + UF 150/220 automatic lathe Turning length 300mm Maximum Bracket 100x100mm Minimum Branch 20×20 Work after the copiers Drill transfer UF 150/220

Inv. Num. : 9123 Type: OPTIMAT HPL 11/43/22 Producer: HOLZMA Created: 2003 Parameters: Saw blade diameter: 450 mm Table dimensions: 4300 x 2200 mm Equipment: Loading platform

1 L+Z lathe Make: VDF-Oerlikon Boehringer Model; DUE 560 Year of Make: 1986 Turning diameter over bed: 570 mm Turning length: 1000 mm Speed range: 11.2 - 2240 rpm Weight of the machine: 3.8 tons. Accessories / equipment: digital display, chip protection. Conveyor belt cover, Coolant device, rapid traverse.

Description: For vacuum and gas flush Including tool trolley, Dye: (5x) 148 x 233 mm, Compressed air: 6 - 8 Bar, Power: 3 x 400V, 50Hz, 20kW, Dimensions: 5800 x 900 x 2400 mm, Weight: 3000 kg

Belt width: 650 mm, Flip-over: 90 - 200 mm, Power: 3 x 400V, 50Hz, 0.5kW, Dimensions: 2100 x 1300 x 1450 mm

Belt width: 600 mm, Power: 3 x 400V, 50Hz, 5.3kW, Dimensions: 2750 x 1650 x 2300 mm, Weight: 1025 kg, Including: GEA OptiAir cycloneTypeOPASerial number515Year of construction2011Power3 x 400V, 50Hz, 4kWDimensions1350 x 950 x 1800 mmWeight450 kg

Belt width: 650 mm, Product height: max 50 mm, Filling: min 40 L, Infeed conveyor length: 600 mm, Outfeed conveyor length: 950 mm, Power: 3 x 400V, 50Hz, 1.8kW, Dimensions: 3850 x 1400 x 1350 mm, Weight: 850 kg

Belt width: 600 mm, Power: 3 x 400V, 50Hz, 3kW, Dimensions: 1800 x 1350 x 1450 mm, Weight: 456 kg

General SKU255X232 MakeCos.mec TypeG30 No.017/01 Year of construction2000 LocationBarneveld Main Features MaterialStainless steel Motor1.1 KW Width100 mm Specified Features - Sieve granulator Granulating sievecheck oscillating Rotor sizesDia. 100x330 mm Sieve sizesDia. 110x330 mm Sieve perforation0,5x0,5 mm InletDia. 200 mm, with pneumatic valve OutletDia. 200 mm, with pneumatic valve Motor1,10 kW (400 V, 1400 rpm) With variable speed drivecheck Speed324,6 rpm MaterialStainless steel 1.4306 (304L) Information Mounted on stainl. st. framecheck Mounted on wheelscheck With switchcheck Floor space1,10x0,95 m Total height1,90 m Weight380 kg CEcheckNew arrivalsSieve granulatorsCosmecNew arrivalsSieves > Sieve granulatorsBrand > Cosmec What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to a ...

General SKU100S393 MakeOostendorp No.3812 Year of construction1989 LocationBarneveld Pressure Working pressure4 Bar Working pressure jacket0 Bar Main Features MaterialStainless steel Volume3000 Ltr. Motor0.55 KW Specified Features - Stirring vessel MaterialStainless steel Stirring vessels Reactorcheck Capacity3000 Ltr. Dished top sidecheck OutletDia. 45mm With jacketcheck (230 Ltr.) Speed mixing shaft59 Rpm Closed stirring vesselcheck Capacity3000 Ltr. Vessel sizesDia. 1200x2700mm Dished bottomcheck Dished top sidecheck OutletDia. 45mm With jacketcheck (230 Ltr.) Max. temperature110°C Motor0,55 KW, 220/380 Volt Speed mixing shaft59 Rpm Information Floorspace1,7x1,7 m Total height4,1 mCatalysts & fillersSolventsDiscountDetergent & surf.Other pharmaceuticsCosmeticsOrganicsLubricants & oleoSolid pharmaceuticsDyes & pigmentsAPIMinerals & inorganicPlastic & ...

General SKU314P709 LocationBarneveld MakeList (CH) TypeORP 10 Batch No.4919.01.01.01.4919 Pressure Vacuum possiblecheck Working pressure jacket2 Bar Main Features MaterialStainless steel Volume18.3 Ltr. Motor3.6 KW Specified Features - Paddle dryer Paddle dryercheck Double shaftcheck Continuouscheck Capacity18.3 Ltr Trough sizes+/- 400x290x170 mm Inletdia. 80 mm Outlet70x50 mm Shaft can be heated(1.9 + 1.4 Ltr) Max. temperature150 Degr. C MaterialStainless steel Information Year of construction2006 Mounted on framecheck Floorspace2.2x0.8 M Total height1.6 M Weight1160 KG Extra Specificationsincluding. hydraulic unit Gribi AG type 1207-1-2090 / 00) for the drive of paddle shafts, motor 3.6 kW, 400 volts. including kneader for product inlet, with hydraulic unit, motor 7.5 / 8.6 KW, 400-690 Volt Catalysts & fillersFeed additivesOther pharmaceuticsCosmeticsSuga ...

DIMTER automatic optimizing cross cut saw, type OptiCut S50, Manufacture year 2022, Machine specifications:, - Push infeed, max. length 6300 mm, - Automatic length measuring and chalk reader, - Cutting width max. 250 mm, - Cutting height 120 mm, - Max. cross section 220 x 120 / 250 x 100 mm, - Motor 7.5 kW, - OptiCom Pro controller, - Automatic outfeed table with pusher

Engine Brand: OLYMPIAN, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Working Hours: 204 Hour(s), Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 12 Volt , Injection Type: Mechanical Fuelpump , Generator KVA: 110 , Generator Hz: 50 , Generator Volts: 400/230 , Generator Amps: 158.8 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/olympian-gep110-generator-110k va-used/608, , = More information =, , Empty weight: 2.885 kg, Type number: GEP110 GENERATOR 110KVA

: gebraucht : WA0031 : 228 € : 1 : 835 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0145 : 840 € : 1 : 3100 mm : 40 mm : 115 mm slightly cranked The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cross-Cut Saw OMEC TA185 Maximum cutting height 180mm Maximum cutting width 900mm Saw diameter 550mm Pneumatic material pressure Pneumatic saw pass Saw control with two buttons 7.5kw main motor Machine dimensions 492x145x120cmH Weight 600kg Net price

Cross-Cut Saw OMEC TA185 Maximum cutting height 180mm Maximum cutting width 900mm Saw diameter 550mm Pneumatic material pressure Pneumatic saw pass Saw control with two buttons 7.5kw main motor Machine dimensions 492x145x120cmH Weight 600kg Net price

Used Filling Monoblock OCIM 24-32-8 up to 10000 bph The OCIM 24-32-8 filling monoblock stands as a pinnacle in bottling technology. It offers an unparalleled capacity of up to 10000 bottles per hour. Crafted by OCIM in 1998, this machinery embodies reliability and efficiency. Specifically designed to cater to the demands of filling glass containers, particularly those housing oil products. Technical Details At the heart of this monoblock lies its rinser, equipped with 24 grippers meticulously engineered to ensure a secure hold on the containers. Operating with precision, the rinser utilizes compressed air for treatment, guaranteeing optimal cleanliness throughout the filling process. Moving seamlessly to the filler, which serves as the core component of the monoblock, we encounter a marvel of engineering. Boasting 32 filling valves, this monoblock is capable of handling even the most dem ...

Used Mesal Filling triblock 12000 BPH - year 2011Technical Specifications & Performance DataThis is an automatic isobaric filling monoblock engineered for PET bottle handling and optimized for carbonated beverage production. Manufactured by MESAL in 2011, model E30-30-10IA1, it combines rinsing, isobaric filling, and capping in a compact rotary platform suitable for medium-speed beverage production. As a versatile second hand asset for a used bottling line, it provides reliable industrial packaging performance with efficient changeover and robust construction.Manufacturer: MESALModel: E30-30-10IA1Year: 2011Production speed: up to 12,000 bottles/hour (format dependent)Container type: PETBottle format: 0.24L (240 ml)Neck finish: 28 mmFilling technology: Isobaric (for carbonated products)Operating mode: AutomaticElectrical data: 400 V, 60 HzPLC/HMI: Omron controlAdvanced Automation & Contro ...

Used MESAL filling triblock - 18000 BPMTechnical Specifications & Performance DataThis MESAL filling monoblock is a tri-block configuration that integrates rinsing, filling, and capping on a single compact rotary platform. Engineered for PET bottle handling and designed for still beverages such as juice and tea, it delivers reliable performance and consistent product quality for industrial packaging and beverage production. With automatic operation, weight (gravimetric) filling, and a robust rotary carousel design, this unit is suitable for scaling a used bottling line or expanding second hand beverage production capacity with modern automation.Manufacturer: MESALModel: E50-60-15GA1Year: 2013Production speed: up to 18,000 bottles/hourConfiguration: Rinser/Filler/Capper tri-blockFiller valves: 60Rinser grippers: 50Capper heads: 15Container type: PETBase format: 0.38L (380 ml)Neck finish:  ...

Used Casepacking Monoblock Oma 2007 This machine is an OMA Monoblock composed of a case erector and case packer. Oma brand case erector with hot glue closure. Nordson glue heater. Vertical cardboard formation. Form 2 cartons of 6 or 1 of 12 with or without the hive inside Case packer with mechanical movement. Possibility of forming and packing various carton formats. Painted iron frame. Accident prevention protections. Production about 320 boxes of 12 and about 600 of 6. The machine is in accordance with CE 2007 with manuals. In excellent condition. Dimensions The machine is divided into 2 parts The first part forms and closes the bottom part of the cardboard with hot glue Front 2,500 mm. Width 2,100mm. Height 2,500mm. Weight about 700 kg. The second part for cartoning machine Front 2,000 mm. Width 1,900mm. Height 2,700mm. Weight about 900 kg.

Used Filling Monoblock BERTOLASO OLIMPIA 12/12/1 up to 2000 bph This Monoblock offers a bottling unit manufactured by Bertolaso in 2006. Although designed to operate at a maximum speed of 2000 bottles per hour (BPH), operators have never used it, leaving it in very good condition. Furthermore, the Olimpia 12/12/1 monoblock efficiently handles glass containers, allowing for both 0.75 and 1.5-liter formats, and performs especially well for bottling still wine and beer. Rinsing System of the Used Filling Monoblock OLIMPIA 12/12/1 The Used Filling Monoblock BERTOLASO OLIMPIA 12/12/1 up to 2000 bph achieves rinsing through a gripper system equipped with 12 clamps for glass containers. In fact, this system ensures uniform container cleaning before filling. Moreover, its single-type treatment prepares containers efficiently, maintaining the final product’s integrity. This configuration co ...