j o r used for sale

Manufacturer: Opti-line Umrichter, Type: V2500-0150TFW1,

Manufacturer: Okoma, Type: SF 6 SA, Year: 1985, Work piece width min-max mm: 40-300, Min.-max. workpiece length in mm: 30-3000, Min.-max. workpiece height in mm: 10-100, Trimming saw: yes, Diameter of saw: 380, Saw kW: ca.2,5, rotations controlled: 4500, Working hight mm: 150, Working range Z-axis mm: 600, Length lifting spindle mm: 650, Diameter of the spindle mm: ca.50, Travels of spindle: 5, rotations controlled: 4500, Working length max mm: 3000, Work piece hight max mm: 100, Main engine kW: 7,5, Clamping system: pneumatisch, Year :1985

Manufacturer: Venti Oelde, Type: EC 35-2-AS, Year: 1992, Filter system - positive pressure: yes, Volume flow rate m³/h: 7500, Filter surface in m²: 70, Filter hoses: Polyestergewebe, Qty. filter hoses: 40, Electronic control board: 1, Suction pipe diameter 1 mm: 15, FREE TEXT: inkl. Schaltschrank, Year :1992

Manufacturer: Weber, Type: OFZ 1 - 1350, Year: 1993, Monting of the machine: Walze, Sanding width mm: 1.350, Sanding hight mm: 3 - 120, Number of sanding belts: 1, Sanding belt dimensions: 2.620 x 1.350, Werkstückdickenmesseinrichtung mittels Ultraschallsensor : no, Table hight adjustment by engine: yes, Rubber roller: 1, Band 1 Leistung kW : ca 18, Table hight adjustment by engine: yes, Continous adjustable feeding speed m/min: ca 5 - 15, Transportbandantrieb kW: ca 3, Intermediate sanding of lacquer: no, Year :1993

Manufacturer: Ingersoll Model: OPS Center 400 Type: Sinker EDM Year of Manufacture: 2000 Find more here - / Contact us at -

: gebraucht : WA0007 : 217 € : 1 : 835 mm mint condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Ocamc, Type: Kopp Elta, Year: 1990, Min.-max. pressing length in mm: 2500, Min.-max. pressing height in mm: 1200, Min.-max. pressing depth in mm: 600, Compressed air bar: 6, Year :1990

Manufacturer: Ott, Type: Euromatic FÜ, Year: 2001, Program: yes, Control: SPS, Work piece width min-max mm: 60 , Min.-max. workpiece length in mm: 60, Min.-max. workpiece height in mm: 10 - 60, Kantenmaterial min-max mm: 0,2 - 15, Vorschub min- max m/min: 12 - 20, Mitre stations: yes, Fasefräsen: yes, Flat scraper: yes, Rolle/Riemen: Rollen, Machine lenght mm: 8500, Wight approx. kg: 4200, Year :2001

Manufacturer: Okoma, Type: SF3 SFA , Year: 1983, Control: elektronisch, Controlled lenght stopper: no, 4-fach Konterholz: 2-fach, Studioeinrichtung Winkel: yes, Nutspindel: yes, Diameter of the spindle mm: 40, Length of tenoning spindle mm: 250, Tool travel range tenoning spindle: 2, Moulding spindles: 1, 1 length of profile spindle in mm: ca.200, Spindle for fittings groove mm: yes, Diameter of the spindle mm: 40, Constant stroke mm: 68, Main engine kW: ca 7,5, Outer profiling package: yes, Horizontal spindle clocked: yes, Work piece re-charging: no, Year :1983

Netzsch Omega 60 homogenisator with control cabinet. Rated flow: 60 liter/hour Maximum pressure: 700 bar.

OZGENC MAKINA SL 500 automatic circular sawing machine was built in 2021 in Turkey by M.S.K. MOTOR KOMP. MAKINA SAN. TIC. LTD. ŞTI. The machine was specially designed for precision cutting of aluminium profiles at an angle of 90°. The entire machining process, from feeding the material to receiving the finished part, is performed fully automatically. The workspace includes, among others, a two-sided clamping system and a high-quality diamond saw with a diameter of 500 mm, the feed of which is regulated by reliable servomotors. The saw is continuously sprayed with coolant in order to increase the cutting quality and extend the operating time. The offered OZGENC MAKINA aluminium sawing machine is also very easy to operate. The touchscreen operator panel with PLC control provides the user with the necessary information, as well as the ability to quickly configure work programmes. The tota ...

Key data: 1340 mm, 150 mm

SPECIFICATIONS: Machining width: 1340 mm Processing height: 150 mm Steel calibration roller: Ø 200 mm Sanding belt length: 2100 x 1400 mm Installed power: 17 kW

CNC lathe Okuma Genos L200E-M with gantry Control: OSP-200LA-R Year of manufacture: 10/2012 max. turning length 380 mm Turning diameter 200 mm Turning diameter over bed 450 mm Spindle speed: 107 - 4,500 rpm Spindle passage: 66 mm Turret: M-V12 (VDI) Speed tools: 50 - 6,000 rpm Rapid traverse m/min: X: 20 / Z: 25 Accessories/Equipment - Gantry loader type ATPGR-03 workpiece dimensions Ø 20 - 150 mm, workpiece weight max. 2 x 3 kg (Double Gripper) for OKUMA Genos L200E-M -Conveyor - Touchsetter - Hydraulic tailstock -Coolant pump - Tool package

SPECIFICATIONS: Conveyor belt width: 300 mm Shaft: Ø 70 mm Saw blade: Ø 300 mm Working height: max. 110 mm Electronic height adjustment Adjustable feed speed (1.5 kW) Installed power: 46 hp

Optima EC automatic continuous scale 1390-750-1500 RA1259 The automatic checkweigher including conveyor belt and SEW gear motor is designed for products up to a maximum of 60 kg. Technical data (see PDF for further details) Manufacturer: Optima Control Systems GmbH (WIPOTEC-OCS GmbH) Type: EC Year of construction: 2000 Machine type: automatic checkweigher Total size: approx. 1390 x 750 x 1500 mm (WxDxH) Electrical connection Nominal voltage: L1/N/PE 230V AC / 115V AC (+6 % / -10 %) Nominal frequency: 50Hz / 60Hz (+/-2 %) connected load: 1,5 KW Fuse protection: 10 A Protection class: IP 65 according to DIN 40050 Weighing technology: Dimensions scale: approx. 600 x 750 x 1500 mm (WxDxH without conveyor belt) Type of measurement: electromagnetic force compensation Weighing range: 0 - 60000 g calibration values e: from 1g degree of accuracy: from +/- 0,5g Temperature: 5° C - 40° C relative ...

Control: OSP-P 300S-H Travel: X-axis: 695 mm Y-axis with stroke: +150/ -150 = 300 mm Z-axis: 1,600 mm B-axis: 240°, positioning in 0.001° C-axis: 360°, positioning in 0.001° W-axis: 1,524 mm Turning diameter: 650 mm Turning length: 1,500 mm Mount: HSK 63 Total tool positions: 40 Accessories: XA and YA axis with direct absolute measuring system (Okuma ABSO-Scale) In-Process Measuring with Renishaw X/Z Axis Probes Measurement in Y-axis incl. measurement in oblique axis mode KitagawaB215A11 max. 2,800 rpm KitagawaB210A8 max. 4,200 rpm Hollow Clamping Cylinder Kitagawa F 2596-H01 Ø96 mm One-Touch IGF Software Multi-Tool Harmonic speed oscillation Software package simultaneous 5-axis machining Conveyor Coolant tank with high-pressure pump 70bar

A complete Ernst Nagel brochure machine is sold Composed of Foldnak 8 SP Plus Online Trimmer Machine is used and fully functional. The machine can and should be viewed and tried out on site, as warranty or guarantee is excluded Price is net, VAT can be claimed.

5000 bottles

SPECIFICATIONS: Briquettes: Ø 60 mm Production: 70 kg/h Installed power: 7.5 kW EQUIPMENT: 1 mini silo

CNC Machining Center Weeke Homag Optimat BHC 250 Masch. No. 0-250-08-1834 Year of manufacture 2004 Kleies machining center in good mechanical condition. Ideal for kitchen and cabinet production. No collisions. No repairs in the last 15 years. Rock solid machine that never caused any problems. Dimensions set-up: approx. 5.4 x 3.5 m Light barrier as safety No unevenness due to step mats Electric cabinet with fan Milling spindle air-cooled. Incl. 2 slide end mills. Z maximum 55mm Various drill bits: 3 mm, 5 mm, 8 mm, 15 mm, 35 mm. Grooving saw in X. Changer 5 places. Processing dimensions: approx. 2.19 x 0.92 m 100 m3 vacuum pump Inspection possible, but the machine is no longer connected. The computer "PC" must be replaced, as it no longer starts. Replacement costs estimated at approx. EUR 6,000.00. Otherwise, the machine is in very good condition. If yo ...

Hardly used blind eyelet hole and setting machine

No tool changer.

This 3-axis Okuma GENOS L200E-M was manufactured in 2011. It features a maximum turning diameter of 200 mm and a Z-axis travel of 380 mm. The machine is equipped with a 12-station turret with driven tools, allowing for milling and drilling on the C-axis. If you are looking to get high-quality turning capabilities, consider the Okuma GENOS L200E-M horizontal turning center we have for sale. Contact us for further details.

Letterpress numerators, all 9 pieces in working condition: 8 reverse; 1 forward Can ship worldwide.

Control for Miwe Ideal 1000/5/2Kr. Parts dismantled immediately after shutting down. easy to clean no guarantee and warranty

Control for Miwe Ideal 500/5/R Parts dismantled immediately after shutting down. easy to clean no guarantee and warranty

Demonstration and trade fair machine. including suction line. Equipment: European safety regulations (sign C.E.) olimpic 500 - Version "HP T-ER2" (40) Volt 400 EU Frequency 50 Hz Control console "eye-S" (control panel) Human-Machine Surface Software (HMI) "Maestro active edge" Maestro connect: Preparation without gateway for subsequent installation Fine milling and radius pulling blade unit radius = 1 mm Fine milling and radius drawing blade unit radius = 2 mm Electronic positioning of the upper pressure beams Spacers on the inlet ruler Kit "SAV€NERGY" Interior lighting of the cab and the gluing area "Nesting" sensing rollers Release Agent Spray Unit "AAR" Sprayer for finishing the edge Sprayer for sensitive edges Joining unit "RT-V1" "EASY SIZE" device Glue unit "VC-VM" Ceramic lamp with infrared rays Electronic positioning of the pressu ...

Used packaging machine made by Ulma, model: TF Optima 416. New: 2000.

turning diameter:250 mm swing diameter:260 mm Available from October 10, 2025 The system consists of two individual systems that are linked together. No driven tools!

SPECIFICATIONS: Installed power: 9.2 kW Briquette size: Ø 70 mm Complete with 13 filter bags (Ø 160 x 550 mm)

x-travel:760 mm y-travel:760 mm z-travel:760 mm total power requirement:43 kW weight of the machine ca.:11,5 t dimensions of the machine ca.:2,7 x 4,73 x 2,87 m max. table loading capacity:500 kg

turning diameter:250 mm swing diameter:260 mm Available from October 10, 2025 The system consists of two individual systems that are linked together. No driven tools!

valve dimensional inspection

Vacuum water degassing system Manufacturer : GEA/Füllpack Type: ONEX Capacity: 30,000 L/hour, 300 HL/hour Technical specifications : The facility is 2-stage Residual oxygen content

Size: A4 Technical details: Speed: 5500 Power: 380 V 1,25 KW Net Weight: 1100 KG Measurements: L1,68 x B1,24 x H1,85m Equipments: Skeleton chase: 260 x 350mm Speed min.: 2.200 sph - max. 5.500 sph Size max. 260 x 380 mm Letter Press Tiegel - DIE Cutter Punching force 40 tons Complete with tools and accessories include frame Standard chase: 260 x 340mm Machines No T 184634 H

Size: A4 Equipments: Letter Press Tiegel - DIE Cutter Punching force 40 tons Size min.: 40 x 70 mm Standard chase: 260 x 340mm Speed min.: 2.200 sph - max. 5.500 sph

cutting diameter: 225 mm saw band length: 2480 mm cutting width: max. 245 x 150 mm voltage: 230 V power capacity: 1,5 kW dimensions of saw-band: 2480 x 27 x 0,9 mm mitter cutting: 0 - 60 ° cutting speed: 20 - 90 m/min weight of the machine ca.: 185 kg dimensions of the machine ca.: 1,4 x 0,69 x 1,7 m - stepless speed - stepless feed - miter cut - Bi-metal saw band - Material stop - Machine base - Coolant device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width:300 mm coil weight:0,5 t coil internal diameter:270 - 360 mm coil external diameter:1000 mm weight:0,3 t dimensions (WxDxH):1,5 x 1,2 x 1,4 m

Technical data of the dryer: -number of chambers 3 – capacity of one chamber 90 m3 -chamber size 9.6x7.3x4.1 m – total dimensions of the chamber 10.2x7.5x5.4 m - type of wood hard, -final humidity 10 +/- 2%

OKUMA MA-600HII CNC machining center was built in 2012 by the Japanese brand OKUMA Corporation. This highly efficient machine is used for advanced workpiece machining in 4 axes. The machining process is performed fully automatically inside a large working area by means of precision cutting tools and a reliable high-speed spindle. The automatic pallet changing system allows workpieces to be loaded and unloaded simultaneously during machining, reducing machine downtime to a minimum. The extensive equipment also includes, among others, a capacious tool magazine and an intelligent CNC controller with an intuitive interface. The MA-600HII CNC horizontal machining center weighs 24500 kg. Technical specifications of the OKUMA MA-600HII CNC milling machine - CNC controller: OSP-P300MA - number of axes: 4 (X,Y,Z,B) - feed in the X/Y/Z axis: 1000/900/1000 mm - rapid traverse in the X,Y,Z ax ...

Key data: 500 mm, 200 mm

Drilling / Milling machine OPTIMUM type OPTI F 40 E Travel X: 500 mm Travel Y: 200 mm Spindle: Ø 80 mm Cone CM3 Spindle exit: 120 mm Spindle speed: from 95 to 3200 RPM Table size: Length 730 mm x Width 210 mm 2 speeds motor Motor power: 1,5 Kw Straight head Cross table Manual Descent Equipped with: 1 rotary vice Voltage: 380 V Dimensions (L x W x H): 1200 x 900 x 1400 mm Weight: approx 350 KG

2 tanks filled with e.g. fruit pomace, capacity 2 x 25,000 l Product is introduced into the tanks via a screw, set up on 2 frames for the underpass of the silo truck Height of the tanks: 6.50 m, D: 3.60 m with top-mounted walkway with railing

Control: OSP-P 300S X-axis: 690 mm Y-axis with stroke: 230 mm Z-axis: 2,045 mm B-axis: up to 225°, positioning in 0.001° Turning length: 2,000 mm Turning diameter: 710 mm Spindle bore: 110 mm Tool holder: HSK 63 Tool magazine: 80-fold Equipment: - Collision avoidance system - Tool monitoring system - Tool measuring device - Tool calibration - Sub-spindle with tailstock function - Renishaw touch probe - Door automation - NC bezel support with bezel SMW SLU-Z 3.2 - ONE touch IGF - Hinged belt conveyor - Main spindle replaced in 2022

Key data: 1600 mm, 1600 mm, 1200 mm

Brand : OKK Type: VP1200 CNC Brand: Fanuc CNC Model: 160is-MB Year of Make: 2004 Table length: 1,600 mm Table width: 1,300 mm X: 1,600 mm Y: 1,300 mm Z: 550 mm Projection: 560 mm Tool Changers: 40 Minimum speed: 100 RPM Maximum speed: 12,000 RPM Max. workpiece diameter: 82 mm ø Maximum table load: 2,000 kg Further information can be found in the pdf file Machine size: 5,800 x 3,200 x 2,800 mm Machine weight: 16,000 kg

Inv. Num. : 8398 Type: OFA 71A Producer: TOS Generated: Parameters: Maximum module: 10 mm Maximum gear diameter: 710 mm Maximum table load: 1000 kg Number of teeth of bevel gear: 8-400 Machine height: 2400 mm Machine length: 3900 mm Machine width: 2600 mm Machine weight: 13500 kg Equipment: Set of interchangeable wheels Conveyor

Code: 0125 Brand: OMEC - ITALY Model: F8 - CE Standard Automatic dovetailing machine for dovetail joints on drawers and various furniture elements - CE Standard The machine is equipped with a unit of 8 spindles with equal mill cutters that allow the production of indents of different heights. Technical data: No. 8 spindles Spindle revolutions /min 17,000 Maximum working width mm 400 Distance between centres of indents mm 25 Drawers production 120 / hour Power Kw 7,5 Working pressure 6 atm Overall dimensions: mm 1500 x 1000 x 1200 h Weight kg 1100