j o r used for sale

; Power [PS]: 27; Gross weight [kg]: 1350; Engine: Yunnei / DEF20CFA4; Accessories: Tanker, Battery, Control Panel, Input: 1P Socket - Busbar , Output: 1P Main load socket - AC socket: 1P, 2x32A, 2x16A - Busbar - 1P Socket; Water Tank Volume [l]: 100

Weight 1300kg Size L 1.66xW1.24xH1.66m Power connection 380V power consumption sheets per hour 5000 Sheet format (max) 260 x 380 Sheet format (min) 40 x 70

Leftover Bread Choppers Diosna/Oasis Model: RZ 3 "the universal shredder" Stainless steel version with filling funnel Capacity approx. hours/ 350-600 kg with DGUV V3 test Connection 400V, 3 kW, 16A-CEE plug Dimensions: 710 x 660 x 1650mm, WxDxH Used machine cleaned and checked 3 months warranty Option: Sieve Maintenance contract Service Package Instruction & Commissioning More bakery equipment in stock!

turning length: 220 mm control: Fabnuc OSPL 500 L turning diameter: 150 mm weight of the machine ca.: 4 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

; Power [PS]: 61; Gross weight [kg]: 2800; Engine: Yunnei / DEF30CAA5; Accessories: Tanker, Battery, Control Panel, Input: 3P Socket - Busbar, Output: 1P Main load socket - Busbar - AC socket: 1P, 1x16A, 1x32A; 3P, 1x63A - 1P Socket; Water Tank Volume [l]: 150

YOC 2001, working width 220 cm, 4 weft colors Stäubli electron. dobby 2871 – 16 shafts installed, Sumo motor, electron. take-up and warp let-off, max warp beam flange dia. 1,000 mm, off-loom take-up

02 sets Picanol Air-Jet Weaving Looms, type OmniPlus Summum – 250-4R YOC 2015, working width 250 cm, 4 weft colors Stäubli electron. dobby 3220 / C4Can – 16 shafts installed, Sumo motor, electron. take-up and warp let-off, double whip rollers, max warp beam flange dia. 1,000 mm, off-loom take-up

01 set Picanol Air-Jet Weaving Looms, type OmniPlus 800 – 220-4R YOC 2010, working width 220 cm, 4 weft colors Stäubli electron. dobby 2881 – 16 shafts installed, Sumo motor, electron. take-up and warp let-off, max warp beam flange dia. 1,000 mm, off-loom take-up

02 sets used Picanol Rapier Weaving Machine, Optimax-4-R year 2008 (1) and 2010 (1), working width 220 cm, FF free flight rapiers with Staubli el. Dobby 2622 – 12 shafts ETU - On-loom take-up, EWL - el. Warp-let-off, ELSY leno selvedge device max. warp beam flanges 1,000 mm, double whip roller

01 sets Picanol Air-Jet Weaving Loom, type OmniPlus 6-P - 340 YOC 2001, working width 340 cm, 6 weft colors Stäubli cam motion 1661 (of 2006) – 6 shafts installed, Sumo motor, electron. take-up and warp let-off, max warp beam flange dia. 1,000 mm, off-loom take-up

01 sets Picanol Air-Jet TERRY Weaving Loom, type OmniPlus SUMMUM- 340 YOC 2015, working width 340 cm, 6 weft colors Stäubli DOBBY STAUBLI – electron. take-up and warp let-off, max warp beam flange dia. 1,000 mm, off-loom take-up

round bar steel: 32 mm square edge steel: 30 mm L-beam: 80 x 80 x 8 mm : 80 x 13 mm : 36 t throat: 170 mm work stroke: 28 mm work height max.: 980 mm material thickness: 28 x 13 mm hole diameter in sheet thickness: 25x10 / 30x8 mm total power requirement: kW weight of the machine ca.: 0,8 t dimensions of the machine ca.: 1,2 x 0,8 x 1,9 m Profile steel scissors with - 4 workstations - 1 foot trigger - hydr. drive - Support tables - Rectangular notcher - Hole punch including tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Crankshaft Jenbacher 420 Nr 327583 Delivery time about 6-8 weeks

Frey OSCAR 20 Piston Filler used Machine is equipped with two rollers that allow manoeuvring with the toggle lever folded out It comes from an insolvent company, the piston with gasket, union nut, piston wrench and piston screw could not be found during the dissolution and were therefore reordered, see pictures. The machine is completely made of stainless steel (body, cylinder, piston and cover) and is in the same condition as it was returned by the customer, so it must be thoroughly cleaned before use Video about test run available

VA-12. Compressed Air Systems (Air Reservoir) 2 complete systems, functional, Built: 1991 Manufacturer: Otto Boge GmbH & CO.KG Each unit contains: - 1 BOGE compressor tank - Diameter: 1.20m - Length: 2.20m - Mass: 1.5 t - Volume: 2000 l - Pressure: 16 bar Each unit includes: - 1 compressor, Type K-TROCHL-KOMPR - Manufacturer: Kompressor HD Technik GmbH Mülheim/Ruhr - 1 motor Technical Data: - Intake capacity: 5-50 m³/h - Intake pressure: 1.03-1.35 bar - Temperature range: 5-30 °C - Motor type: SCHORCH K 3200 L - Model: B 1014-2, 24 kW, 400V Find more here - / Contact us at -

SNA-22. Hydraulic System Built: 1992, Type SB330-55 A4/24; Complete system (Motor, Pump, Control) Manufacturer: Cameron system with 600 l oil tank Technical Data: - 230-320 bar - Test pressure: 330 bar - Includes 7 nitrogen bottles, Volume: 50 l each - Pressure: 200 bar, prefilled at 120 bar - 2 pumps, 25 l/min Find more here - / Contact us at -

ID3502 OMAG Plant for large-diameter pipes  / Großrohranlage OMAG large pipe system (all hydraulic) including molds, bases, support rings, various accessories and forklift with turning tongs OMAG large-diameter pipe system (all hydraulic) including moulds, lower sleeves, support rings, various accessories and forklift with turning pliers

Code: 0378 Brand: ORMAMACCHINE Model: NPC 6/90 E - CE Standard Hot press with electric platens for veneering, panels, furniture, custom-made furnishings, wooden doors, kitchens, bathroom furniture, composite materials, plastics, and various - CE Standard Technical data: Platen dimensions 2500 x 1300 mm Total thrust 90 tons N° 6 cylinders Cylinder diameter 70 mm Stroke 400 mm Pressure 3 kg/cm² Motor 2 Hp Electric Platens: Max temperature up to 120° C, max working pressure 7 kg/cm². Platen made of a 12 mm aluminium plate which resistances are inserted in underneath a chipboard support with reinforcement tubes inside Perimeter emergency rope Double rack system Lateral guides on platens for a perfect movement further safety feature of the pressing platen Overall dimensions mm 3060 x 1650 x 1850 h Weight kg 3400

Code: 0381 Brand: OMC - ITALY Model: PL/160 - CE Standard Hydraulic hot press with solid platens, heated by an electric oil boiler, for panels, veneer, woodworking, furniture, custom-made furnishings, wooden doors, composite materials, and various - CE Standard Platens dimensions 3500 x 1300 mm Solid steel perforated platens N°1 intermediate platen Max temperature 250°C Opening 400 mm N° 8 pistons - diameter 85 mm Specific working pressure 30/40 kg/cm² Total thrust 160 tons Heating by 3 diathermic oil boilers Safety devices: perimeter safety cable, emergency stop button, two-hand control Automatic opening with timer Control panel Motor 3 Hp Power supply: 400 V / 50 Hz Overall dimensions mm 4200 x 1600 x 2250 h Weight kg 5500

Continuous body press press press 2400/1500/650mm Automatically adjusts to the respective body size Works perfectly

Venjakob Perfect paint shop: - Manufacturer: Venjakob - Year of construction: 2013 - Working width: 1,300mm - Max. part length 6,500mm - In U-shape with angle transfer Composed of: 1. Covering tape, length 3,050mm 2. Free space for a grinding machine (option) 3. Automatic sprayer VEN SPRAY PERFECT, length 5,510mm 4. Evaporation dryer OIR, length 6,000mm 5. VEN DRY AIR JET nozzle dryer, length 4,160mm 6. 180 degree angle transfer, with nozzle dryer 7. Supply air system for angle transfer, 25,000m³/h 8. VEN DRY AIR JET nozzle dryer, length 5,160mm 4 Pieces IR Illuminators 9. VEN DRY AIR JET nozzle dryer, length 5,160mm 4 Pieces IR Illuminators 10. VEN DRY AIR JET nozzle dryer, length 5,160mm 4 Pieces IR Illuminators 11. 3D-UV Dryer, VEN DRY UV, GA + HG 12. Removal area, tape of UV dryer 13. Supply air system hall, 30,000m³/h Further information: On  ...

Radial Drilling Machine OTTO MULLER Spindle: CM4 Spindle speed: from 70 to 1400 RPM Front table size: 1350 x 550 Back table size: 1000 x 400 mm Slide travel: 1000 mm Maxi distance spindle nose/front table: 600 mm Motor: 2 speeds Maxi column rise: 400 mm Auto descent Drilling/tapping function Spindle speed adjustment by belt variation Hydraulic locking Lubricant pump Voltage: 380 V Dimensions in low position: W 1500 x D 2400 x H 2300 mm Weight: approx 2 T

Orma LS/ECO/CA 30/13 self-loading press Working length 3000mm Working width 1300mm Automatic material loading Adhesive Application System Shelves heated with oil up to 130C Upper clamping force 57t Side clamping force 9t Year of production 2001 CE Certified

Veneer press Brand: ORMA Type: NPC/DIGIT 6/90 New machine Technical datas: Press area: 2500x1300 mm Amount cylinder: 6 Lift & max. press opening: 400 mm Total pressure: 90t Electro-heater 18 kW for thermo-oil (up to 120°C) Optional: - Aluminium coating - 650 mm stroke - Parallelism control by sensor - Extra charge for down stroke design - Extra charge for temperature up to 150°C - Extra charge for temperature up to 200°C - Mylar protection foil 350,00 ? per panel - Pressure plate covered with glass fiber fabric Teflon - Hardware for Industry 4.0

Hot plate press (electric) Brand: ORMA Type: NPC 6/120 new machine Technical data: Heating plates: 3500x1300mm Cylinder: 6 pieces Press force: 120t Stroke/opening dimension: 450mm Connection value: 28.8kW (ELKOM plates) Options: - Intermediate plate - Anodized surface for ELKOM panels - Parallelism sensor á 1,000.00 EUR - Pressing mechanism from above (fixed lower plate) - Max. temperature till 150°C - Max. temperature till 200°C - 4-sided loading possible - Mylar protective film - Fiberglass Teflon protection - Hardware for Industry 4.0

Glue application machine Make: OMMA Type: FSC-1.300 for water-based glues working width: 1.260 mm maximum working thickness: 90 mm working speed: 19 m/min. height of working level: 905 mm application rolls Ø: 185 mm standard grooving lines: 14 inch installed power: 0,5 kW colour: RAL 7035 command side (compared to working direction) right standard voltage: 400 V/50 cycles /3 ph. technical equipment: - rubbered application rolls, coated with grinded surface - thickness graduate indicator - top & bottom glue dosing tanks in grinded steel with ground profile and micrometric glue regulation - parallelism regulation between application rollers - rollers protection with security plate and foot control in front of the machine that stops immediately the machine if activate - security front foot barrier - steel zinc collecting tank of the cleaning water - electric e ...

doubel side brushing unit Brand: OMMA Type:SPX_1400 New machine with transversal cleaning system Technical data: Useful working width about mm 1.350 Maximum working thickness mm 150 Adjustable speed mt/min 5~25 Working level (adj. +/- 20mm) mm 905 Brush rotation speed about mt/min 92 Suction connections Ø mm 120 Installed power about kW 1,2 Color Ral 7035 Command side (in front machine, looking at the entrance) Right Standard voltage v 400/50/3 Technical equipment: - Top & bottom transversal cleaning system by means of motorized belts with special nylon brushes. - Adjustable system to compensate the natural lengthening of the brushes, increasing the lifetime. - Mechanical devices through the brushes to remove dust allowing the best elimination/aspiration. - Special cleaning system for the finest particles, with adjustable atomizers and separate tank for specif ...

This 3-axis Okuma Genos L300 E-M was manufactured in 2014. It features a maximum turning diameter of 300 mm and a turning length of up to 1000 mm. The machine is equipped with a spindle speed of up to 3800 rpm and a robust turret with 12 stations. If you are looking to get high-quality turning capabilities, consider the Okuma Genos L300 E-M CNC lathe we have for sale. Contact us for further details.

This 3-axis Okuma M460R-VE vertical machining centre was manufactured in 2013. It features a robust X-axis travel of 762 mm, Y-axis travel of 460 mm, and Z-axis travel of 460 mm. The machine is equipped with a powerful 15 kW spindle that can reach speeds of up to 15,000 rpm, along with a tool magazine capacity of 20. If you are looking to get high-quality machining capabilities, consider the Okuma M460R-VE machine we have for sale. Contact us for further details.

This 3-axis Okuma M560-V was manufactured in 2016. It features a generous X-axis travel of 1050 mm, Y-axis travel of 560 mm, and Z-axis travel of 460 mm. The machine is equipped with a powerful 22 kW spindle and a tool magazine that holds 32 tools. If you are looking to get high-quality machining capabilities, consider the Okuma M560-V vertical machining centre we have for sale. Contact us for further details.

Press capacity: 160 ton Ram stroke adjustable: 20 - 130 mm Slide adjustment: 100 mm Daylight: 560 mm Table surface area : 1500 x 800 mm Slide area: 1400 x 800 mm Number of strokes: 20 - 60 s.p.m. Distance between the columns F - B: 520 mm Height over floor approx.: 3550 mm Required power: 48 kW Weight of machine approx.: 26 ton

This 3-axis Okuma MB-66VA was manufactured in 2016. It features an X-axis travel of 1500 mm, Y-axis travel of 660 mm, and Z-axis travel of 660 mm. The machine is equipped with a powerful 30 kW spindle, capable of reaching speeds up to 15,000 rpm, and has a tool magazine with 32 positions. If you are looking to get high-quality machining capabilities, consider the Okuma MB-66VA vertical machining centre we have for sale. Contact us for further details.

; Gross weight [kg]: 1254; Engine: Perkins 1104C-44TAG2; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 218

OPM ISF120S Spiral mixer 120L spiral mixer, stainless bowl and spiral, variable speed, forward / reverse, with timer, 3Ph

Inv. Num. : 8264 Type: MA-400HA Producer: OKUMA Created: 2008 Parameters: Work table length: 400 mm Work table width: 400 mm Maximum spindle speed: 8000 1/min X-axis travel: 560 mm Y-axis travel: 610 mm Z-axis travel: 625 mm

Key data: 1280 KW

CO-GEN GENERATOR SYSTEM By MTU Onsite Energy Year 2015 Type GB1286N5 1286 kW Electrical Power Natural Gas working hours 18.500 h 400 V, 50 Hz, 3-Phase With: 1 Control Panel 1 GEA Heat Exchanger 1 Stamford AC Generator: 1770 kVA Base Rating 1416 kW Base Rating 1500 RPM 400 V, 50 Hz, 3-Phase

x-travel: 600 mm y-travel: 270 mm z-travel: 430 mm : 630 mm table-size: 1120 x 270 mm spindle turning speed range: 45 - 1660 U/min spindle taper: SK 40 control: konventionell spindle motor: 2,2 kW total power requirement: 2,4 KVA weight of the machine ca.: 1,35 t dimensions: 1,8 x 1,4 x 1,8 m Machine equipped with: - Digital display - Machine light - Coolant system - Machine feet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Brandt, Type: Optimat F 13, Work piece width min-max mm: 50, Edgeband thickness max mm: 0,5-3, Edgeband height max mm: 55, Milling units: 2, rotations controlled: 18000, kW-Leistung Motor: 2 x 0,5, Work piece width min-max mm: 50,

Manufacturer: Weeke, Type: BP 140 Optimat, Year: 1997, Control: Woodworp, Working range X: 3600, Working range Y-axis: 1200, Working range Z: 150, C axis: yes, Number of milling spindles: 1, Milling engine 1 hours power: 7,5, rpm 1): 24000, Number of tool changers: 12, Vertical drills-X: 10, Drill vertical Y: 10, Horizontal drills-X: 4, Drill horizontal Y: 2, Traverse table: yes, Vacuum pumps m³/h: 160, Tool clamping system: HSK 63, Saw unit: yes, CE-Sign: yes, Year :1997

Manufacturer: Homag, Type: Optimat BAZ 311/40/K, Year: 2007, Software: PC85 CNC CORE Z, Feeding speed max m/min: X,Y-80, Z-30, Working range X: 4000, Working range Y-axis: 1220, Working range Z: 12-300, Year :2007

This 4-axis Okuma LU15 M-2SC 1000 was manufactured in 1998. It features two tool turrets, live tooling with C-axis capabilities, and synchronous tapping for enhanced productivity. The machine includes an integrated tool setter for precise measurements and a programmable tailstock for versatility. If you are looking to get high-quality turning capabilities, consider the Okuma LU15 M-2SC 1000 horizontal turning machine we have for sale. Contact us for further details.

This 5-axis Okuma LB 300M X 500 was manufactured in 2012. It features a maximum turning diameter of 340 mm and a turning length of 480 mm. The machine is equipped with a powerful spindle speed range of 45 - 3,800 rpm and a robust turret with 12 stations. If you are looking to get high-quality turning capabilities, consider the Okuma LB 300M X 500 horizontal turning machine we have for sale. Contact us for further details.

Manufacturer: 3NINE Type: Oil mist separator Year of Manufacture: 2024 Find more here - / Contact us at -

Manufacturer: Ott, Type: F 2530, Year: 2008, Min-max edge material mm: 0,2-25, Work piece width min-max mm: min. 65, Min.-max. workpiece length in mm: min. 150, Min.-max. workpiece height in mm: 8-60, Min-max feed m/min: 10-16, Premilling: yes, Mitre stations: yes, 2 motors: yes, Type of scraper: Profil und flatch, Flat scraper: yes, Year :2008