129,240 used machines on RESALE, but how to find them? Machine Search
A Jumag steam generator including a Weishaupt burner is available. 1) Jumag DG 360 rapid steam generator, year of manufacture: 2011, volume: 60l, test pressure: 12bar, max. operating pressure: 13bar, max. temperature: 220°C, max. firing capacity: 245kW. 2) Weishaupt WM-G10/1-A Monarch burner, year of manufacture: 2011, capacity range: 65kW-310kW, connection pressure range: 15mbar/500mbar, gas type: bio. The system was in operation for only 3 years. Documentation available. An on-site inspection is possible.
An electric rapid steam generator made by Jumag is offered. The steam generator has run little and is in good condition. Technical data: - max. permissible Pressure PS 12.5 bar - Test pressure PT/PP 32bar/24bar - max. permissible Temperature TS: 200°C - Max. electric heating power: 100 kW - Weight: 395kg For more data on steam output, etc., see the pictures.
De plaatdikte is afhankelijk van het profiel. dop: 0,5 gt; 1,5 mm 7 stations vermogen: 2,4 kW gewicht: 430 kg
JUNG D22 / Internal Cylindrical Grinding Machine -Machine suitable for inner round + surface grinding -Smallest grindable bore 14mm -Largest grindable bore 150mm -Grinding length without face grinding device 250mm -Grinding length with face grinding device -6x workpiece speeds 46-270 rpm -Spindle box right/left swivel 30 degrees -Distance of the spindle axis over the center of the table 250mm -Largest workpiece spindle/grinding support distance 935mm -Spindle box / inclined position 30 degrees each -Work table / tilt forward/backward 5 degrees each -Hand/automatic operation -Taper grinding device -Bezel -Three-jaw chuck -Replacement grinding spindles
GT-5322 2-Axis Ripper - Brand: JBF - Model: DC 50/40 - Cutting chamber: 500 x 400 mm - Motor: 9.2 KW - Year of manufacture: 2015 - With 2.70 x 0.35 feed conveyor
A row based pallet flow racking system Jungheinrich with roller tracks is available. Load carrier: Euro pallet, rack bay length: 2000mm, max. bay length: 2700mm, channel width: 2000mm, rack height: 2000mm, roller cassette height: 1450mm, beam pair height: 550mm, max. load level/channel: 5200kg/400kg, roller modules: 3/level, max. bay load: 200kg, roller track channel length: 2550mm, roller module inner width: 872mm, roller module installation width: 947mm, roller diameter: 60mm, roller pitch: 175mm, max. roller load capacity: 240kg. Documentation available. An on site inspection is possible.
A welding turning device Jucat, consisting of two parts with the workpiece in the middle, is available. Design: 2-column system, max. load capacity: 6000kg, rotation torque: 800Nm, tilting torque: 7500Nm, lifting range: 800mm-2000mm, lifting speed: 40mm/s, max. rotational speed: 2rpm, clamping plate diameter: 750mm, operating pressure: 120bar. Machine dimensions X/Y/Z: approx. 2500mm/1100mm/1100mm, weight: approx. 2x1000kg. Without blinds. Documentation available. An on-site inspection is possible.
A welding turning device Jucat consisting of two parts with the workpiece in the middle is available. Design: 2-column system, max. load capacity: 6000kg, rotational torque: 800Nm, tilting torque: 7500Nm, lifting range: 800mm-2000mm, lifting speed: 40mm/s, max. speed: 2rpm, clamping plate diameter: 750mm, operating pressure: 120bar. Machine dimensions X/Y/Z: approx. 2500mm/1100mm/1100mm, weight: approx. 2x1000kg. Documentation available. An on-site inspection is possible.
Offer 12 connecting rods with the part. 380683 for sale.
Inv. Num. : 8949 Type: BUAJ 9 NC Producer: JUNKER Created: 2005 Parameters: Maximum sanding length: 320 mm Grinding diameter: 160 mm Tip stroke: 85 mm Drive power of the grinding wheel spindle: 2.2 kW Maximum speed of the grinding wheel spindle: 3600 1/min Machine height: 1700 mm Machine length: 2300 mm Machine width: 1800 mm Machine weight: 1400 kg
Dosing rotary valve, rotary valve, dosing valve, rotary valve for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor -Manufacturer: Schneider-Jaquet, rotary valve -Inlet opening: Ø 147 mm -Outlet: 180 x 90 mm -Shaft: Ø 25 x 45 mm -Height shaft axis: 140 mm -Number: 3x rotary valve available -Price per piece -Dimensions: 380/250 / H430 mm -Weight: 38 kg
Chassis, support wheel, tandem cargo wheel, load rollers, steering roller, support roller -Manufacturer: Jungheinrich, swivel wheel from electric pallet truck EJE-KmS 16G-24-140-56 -Wheel size: Ø 96 mm / 100/40-75 -Dimensions: see photos -Number: 2x support rollers available - Price: per piece -Dimensions: 250/120/H135 mm -Weight: 5 kg/pc.
Chassis, support wheel, tandem cargo wheel, load rollers, steering roller, support roller, fixed roller, swivel wheel, support wheel bracket -Manufacturer: Powerthane / Jungheinrich, support wheel from electric pallet truck ECE 20 -Wheel size: 180 x 65 mm -Quantity: 1x support roller available -Dimensions: 240/160/H280 mm -Weight: 13 kg
Running gear, support wheel, load wheel tandem, load rollers, steering roller, support roller, fixed roller, swivel wheel -Manufacturer: Powerthane / Jungheinrich, jockey wheel from electric pallet truck ECE 20 -Wheel size: 180 x 65 mm -Number: 1x support roller available -Price per piece -Dimensions: 235/160/H240 mm -Weight: 13,1 kg/pc.
Gear motor, electric motor, electric gear motor, flat gear motor -Manufacturer: ZHE JIANG, geared motor type BRF37-YO.18-69.33-M1-I -Speed: 19 rpm -Engine: ZHE JIANG type YS 6324 -Power: 7.5 kW / 1330 rpm -Shaft: Ø 25 x 50 mm -Protection rating: IP 55 -Quantity: 2x geared motor available -Price per piece -Dimension: 430/190/H1800 mm -Weight: 18 kg/pc.
Refrigeration compressor, refrigeration machine, refrigeration compressor, refrigeration unit, refrigeration compressor, compressor, motor compressor, separating hood compressor, separating hood compressor, cooling unit -Manufacturer: Maneurop, compressor compressor type MTZ32 JF4 -Power: 2.0 kW -Voltage: 380V / 50Hz -Volume flow: 9.3 m³/h -Dimensions: 300/280/H355 mm -Weight: 22 kg
Cantilever rack, heavy-duty rack -Cantilever rack: base field double-sided, 2 uprights -Cantilever arms: 4 per side, length 500 mm -Compartment height: variably adjustable -Quantity: 2x shelves available -Price per piece -Dimensions: 1180/1195/H2960 mm -Weight: 139kg / 140kg
Dosing rotary valve, rotary valve, dosing valve, rotary valve for screw conveyor, transport screw, screw conveyor, conveyor technology, tubular screw conveyor -Cell wheel lock. 8 blades, with drive -Speed: 16 rpm -Drive motor: 0.75 kW -Inlet/outlet: 500 x 750 mm -Number: 2x rotary valves available -Price: per piece -Dimensions: 650/1340/H600 mm -Weight: 208 kg
Metering rotary valve, rotary valve, metering valve, rotary valve for screw conveyor, transport screw, screw conveyor, conveying technology, pipe screw conveyor -Rotary valve. 8-winged, with drive -Speed: 16 rpm -Drive motor: 0.75 kW -Inlet/outlet opening: 500 x 750 mm -Number: 1x rotary valve available -Price: per piece -Dimensions: 650/1340/H600 mm -Weight: 208 kg
Dosing rotary valve, rotary valve, dosing valve, rotary valve for screw conveyor, transport screw, screw conveyor, conveyor technology, tubular screw conveyor -Rotary valve. Type JK-S w/ 6 blades, with drive -Speed: 19 rpm -Drive motor: KEB 0.55 kW -Inlet/outlet: 220 x 1500 mm -Dimensions: 340/1970/H305 mm -Weight: 113 kg
Magnetic plate, magnetic table, sine table, sine plate, relief grinding device, grinding machine accessories -Design: Cutting tool mold making for conically ground cutting plates or mold inserts -Angle head for surface grinding machine or measuring machine -Magnetic plate -Angle: adjustable -Wooden box -Total weight with box: 35 kg
Ice water generator for cooling supply of wort cooler (2nd stage), fermentation cellar (= 100 hl capacity), storage cellar (= 320 hl capacity) and pressure tanks (= 260 hl capacity) in a microbrewery with 20 hl output., Additional title: ice water generator, Cooling capacitry: 14 kW, Power: 6,2 kW, Length: 1600 mm, Width: 1600 mm, Height: 1800 mm, Position: free standing, Base construction: cylindrical tank with refrigeration unit on top, on square tube frame with domes, Features: insulated stainless steel tank with side cover, semi-hermetic reciprocating piston compressor, copper tube coil exchanger, control box, cooling water pump
material width:180 mm coil weight:0,75 t material thickness:2,0 - 6,0 mm coil external diameter:400 - 1250 mm no. of straightening rolls:5 number of draw-in rolls:2 band speed:20 m/min power requirement:4,0 kW weight:2,8 t dimensions (WxDxH):1,4 x 2,45 x 1,85 m snubber roll:pneumatic
We offer wire looms asking for current offers. abc.steinfels-kg.de
Weight: 1600 kg Bj.new Very nice state of use Package dimensions: 20 x 35 x material quantity Hand control To compress copper, aluminum, zinc, etc. Immediately available. More pictures on request, are not the original pictures Year built: new Weight: approx. 1600 kg Built in: 1997 mechanical condition: very well dimension of the baling press: 20 x 35 x l ength of the material to press manual control materials to press: copper, aluminium, zinc etc. The machine is on stock. Every time we have 8 cablestrippers on stock. new an second-hand machines
Nakata Zoki Kobe, Japan (Troester design) Duplex Extruder Unit Dual 150mm dia PIN Type Extruders, Year of manufacture: 1990, with Roller Feed, and duplex Die. L/D ratio 16:1 Number of Pins: 10 Rows x 8 Pieces, Spare Pins included. Screw Speed 45 r.p.m. Motors 185kw D.C. variable speed, 415 volt, 3ph, 50hz. Full Books and Drawings available. Thyristor Drives included. Starter and Control Panel for Lower Extruder only. Die usable Width 18\\, In good condition.
used
technical data: Make: Jansen Type: for OSS 71 (from 1972-1990) Type No: HS No. 7649 Purpose of use: 1 pressure register at the top Dimensions: for frame supports 62/80
used
QTY.2 ROLL STRIP CASTERS, STRI WIDTH: 1730 MM, THICKNESS: 4.0 - 10.0 MM, QTY: 1 TWIN BELT CASTER, STRIP WIDTH: 1930 MM; THICKNESS: 15.9 - 19.0 MM
Pneumatic valve DN 300 Manufacturer: Jaudt Dosiertechnik Maschinenfabrik GmbH Type: Varioschieber FSV Opening width mm: ø 350 Height mm: 130 Max.Working temp. ° C: 80 Operating pressure MPa: 0.6-1.0 maximum operating pressure MPa: 0 Control voltage V: -. Housing: one-piece cast housing in flange version the round face with coarse good Chicane Sealing: slide sheet implementation for with Adjustable stuffing seal Pressure piece from cast aluminium alloy Blade: Stainless steel 1.4301 Slide sheet: eccentric screws galvanized Finish: Stainless steel and aluminum parts blank Grey cast iron housing painted in RAL 9006 Steel parts zinc plated, 10 & #956; m Plate made of aluminium Housing material: Cast aluminium alloy (AlSi 10 mg) shock-proof up to 5 bar Flanschbohrbild: According to DIN 2501 PN 6 Packing material: ARAMIDE (Tmax 280 ° C) Operation: pneu ...
Spare part for Tetra Pak TBA/3 filling machine: From the TBA/3 Jaw System, pre-assembled, complete: yoke left hand and yoke right hand with left hand arm, right hand arm Condition: unused/new Intermediate sale reserved
From the TBA/3 Jaw System: pre-assembled complete yoke left hand and yoke right hand with left hand arm, right hand arm etc. Condition: Unused/new Subject to being unsold
Type: B261 / 5.25 22-50 No.: 16316 Drive North Type: SK 22-100 L / 4 TF No.: 8943557.00 n = 218 min-1 Motor North Power: 2.2 kW Dimensions: LWH = 1000 x 240 x 430 mm Weight: approx. 80 kg
used
ASPIRATOR / CLEANING OF GRAIN / 120 T / H CONVECTION 9.2 KW SCREEN DRIVE 3 KW IMMEDIATELY AVAILABLE MOB: + 49 171 5213204
P92 - used approx. 7 m³ / 7,000 litres polyester tank, GRP tank, Juno tank, standing on 4 cones, in good condition. technical details: capacity: approx. 7 m³ / 7,000 L material: polyester tank / GRP tank manufacturer: Juno dimensions: w 1.50 m x l 2.00 m / h total 3.50 m including feet Manufacturer Juno, aboveground storage tank, including four steel bases / cones, lid on the front side, several in - and outlets. The container can be used as a storage tank for many different media such as water, liquid feed, whey, potato steam skins, molasses, liquid manure, AHL, ASL, seeping juice, rapeseed oil, or as a rainwater tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it m ...
System: dosing pump Manufacturer: Jesco Prod.-No.: 37142 Type: CC 10/40 Year: 05/2003 IP: 55 KW: 0.05 Rpm: 1440 Hz.: 50
McIntyre 200B Shear Available with or without a stand, this machine might look small but it has a big cutting capacity Small but powerful McIntyre's wide experience in hydraulic equipment manufacture has enabled us to build an 8†shear with a staggering cutting force. Although equipped with only a blade, the high shear force and wide tip to tip opening on the McIntyre 200B means that it can deal efficiently with a whole range of non- ferrous cleaning and sizing operations - in particular larger diameter electric cables and valves. In most cases - if your metal will fit into the jaw of the 200B, then this machine will cut it. Our company can provide this equipment with short delivery time.
McIntyre 407 CAT Shear Designed to recover the precious metals found in Catalytic converters, JMC Cat shears also versatile enough to be used anywhere in your yard. Purpose Built McIntyre Cat shears have been purpose built for recovering precious metals from catalytic converters. The Catalytic converter is simply placed in the jaws and cut. The movement of the jaw is directly controlled by the moveable foot pedal and a V clamp holds the Cat in place during cutting. Once cut, the pinched end of the converter can be re-opened using the side bracket attached to the top jaw, allowing the contents to be poured out.
McIntyre 407 Shear An affordable efficient 407mm (16") blade shear with enough power and speed to handle a wide variety of cutting tasks Robust, affordable, efficient Built originally for scrapyard use, the McIntyre 407 shear is robust enough to withstand the most difficult of working environments. It is now our most popular alligator shear with more than 2000 still in daily use worldwide. The McIntyre 407 is able to handle; automotive scrap, whole gear boxes, cylinder heads and blocks, oversized gate valves and of course all the usual non ferrous metal separations. The 407 can also be used to cut ferrous metals. Why
McIntyre 500 CAT Shear The 500 CAT is designed for those needing just a bit more blade length without an equivalent increase in price. Versatile The 500 CAT gives customers just a bit more blade length without a big price increase. It is powerful enough to handle most non ferrous cleaning and sizing operations, and can also be fitted with an optional bracket enabling it to assist when processing catalytic converters. Long-lasting In common with all JMC shears, the 500 CAT has been designed and built to last. Blades are deep hardened for extended life, hardened chrome rod is used in the hydraulic ram, and components are all choiceed according to their quality over and above their price.
McIntyre 500HD Shear This new generation shear is faster and more powerful than any other machine of its size. Featuring an automatic hold down clamp and 20 inch blade, this model is available as electric or diesel Fast and strong This 508mm, 20 inch, blade shear has been built for speed and power, and will outperform every other machine in its field. The McIntyre 500HD has enough shear force to deal with a wide range of operations and materials including: the cleaning of automotive aluminium scrap, whole gearboxes, cylinder heads and blocks, oversized gate valves, and the handling of all non-ferrous separations. It can also be used for cropping ferrous metals.
McIntyre 500HD Shear This new generation shear is faster and more powerful than any other machine of its size. Featuring an automatic hold down clamp and 20 inch blade, this model is available as electric or diesel Fast and strong This 508mm, 20 inch, blade shear has been built for speed and power, and will outperform every other machine in its field. The McIntyre 500HD has enough shear force to deal with a wide range of operations and materials including: the cleaning of automotive aluminium scrap, whole gearboxes, cylinder heads and blocks, oversized gate valves, and the handling of all non-ferrous separations. It can also be used for cropping ferrous metals.
McIntyre 600 CAT Shear Cat shears are powerful enough to deal with a wide range of operations including the cleaning of automotive aluminium scrap, whole gear boxes, cylinder heads and blocks, oversized gate valves and the handling of all non ferrous separations. VERSATILE The 600 CAT features a blade guard system which gives good visibility to the operator and acts as a hold down to prevent material kick back. The machine is foot pedal operated and the jaws return to the open position once the foot pedal is released to increase safety. Wheels are fitted as standard, and forklift points have been included on the body of the machine to ensure that it can be safely lifted both within the yard and during transportation.
McIntyre 600 GT Shear Another Shear in the McIntyre GT Range, the 600 gives a massive cutting area for its relatively diminutive size. Versatile The 600 GT features a blade guard system which gives good visibility to the operator and acts as a hold down to prevent material kick back. The machine is foot pedal operated and the jaws return to the open position once the foot pedal is released to increase safety. Wheels are fitted as standard, and forklift points have been included on the body of the machine to ensure that it can be safely lifted both within the yard and during transportation. Ideal for larger items such as car radiators which can be handled in just one pass, the 600 GT can also be adapted to process catalytic converters.
McIntyre 900 Diesel Shear A reliable workhorse equipped with 920mm (36.25") blades to allow you to handle larger pieces of material with ease All round yard shear Designed to give maximum possible blade length without losing cutting capacity, the 900 shear is perfect for a wide variety of yard uses in particular the handling of larger pieces of non ferrous scrap. The 900 can be operated via a foot pedal for more accurate control, or can be set to work continuously to enhance processing speed. The machine is built to last using top quality components and is equipped with a heavy duty guard to improve operator safety.
maximum number of results exceeded
please refine your search
