j o r used for sale

Frame from JCB loader, axles, hydraulics.

Stratasys J750 DAP – Economic value through realistic anatomy simulation, The Stratasys J750 with Digital Anatomy Printer (DAP) Upgrade is not only a technological investment – it is a strategic tool for Cost reduction, process optimization and risk minimization in medical and medical-technical applications., ---------------------------------------------------------------, Your economic benefit, 1️⃣ Reduction of operation times, Patient-specific anatomical models enable more precise preoperative planning., → Shorter intervention times, → Lower operating costs, → Reduced complication risks, Already a few avoided operating minutes per procedure can significantly amortize the investment., ---------------------------------------------------------------, 2️⃣ Fewer revision and incorrect decisions, Reality-realistic tissue simulation allows testing  ...

General SKU223Y099 LocationBarneveld MakeAlpine Main Features Motor1 KW Inlet diameter35 mm Width100 mm Specified Features - Jet Mill Grindercheck Rotor sizeø 50 mm Grinding room sizeø 100 mm With hoppercheck Inletø 35 mm Motor0,25 kW, (380 V, 2860 rpm (Ex)) With variable speed drivecheck Jet Mills MaterialStainless steel 1.4541 (321) Magento base g_extra_specificationsWith filter (mounted on wheels) and a red metal crate filled with many spare parts. Information TypeAFG-100 Year of construction1985 Mounted on wheelscheck With switchgearcheck Floor space1,70 x 1,10 m Total height2,40 m Extra Specifications With K-Tron dosing screw, type T20A, 0.25 kW: Becker vacuum pump: Alpine stainless steel filter, type K6R, 2.4 m²: with spare rotors and parts:Jet MillsAlpineMills > Jet MillsBrand > Alpine What you can expect from Foeth: -- Machine is in working con ...

Single jacketed tank with an propellor agitator. Volume: liter. Motor of the propellor agitator: 0,18 kW - 380 V - 50 Hz - 420 rpm. Stainless cover of the motor. Manhole with breather on top. Level indicator in top. Spraybowl for CIP cleaning. 3 legs. Inlet from the side. Outlet in the bottom center. Internal diameter 46 cm, internal height 72 cm. Total dimensions: 48 x 48 x 150 cm., Type of Machine: Process tank, Volume: 120 liter, Double jacketed: No, Insulation: No, Type of agitator: From the top, out of hte center, placed propellor agitator, Motor of agitator: 0,18 kW, CIP Spray bowls: Yes, Manhole: Yes, Number of feet: 3, High / Low Level sensors: Yes, Internal diameter: 46 cm, Internal height: 72 cm, Total outside diameter: Ø 50 cm, Total outside height: 150 cm, Weight: 60 kg

Cutting dimensions X/Y: 3000mm/2000mm. The cutting head of the machine currently cannot be moved downward or upward. This problem can be resolved with a small spare part. The machine was used in the stone processing industry. Documentation available. An on site inspection is possible.

New CNC Maschine Brand: Comec type: MD JAMB CNC machining center for complete machining of a wide range of door frames. 3 machining supports for cutting to length on miters, milling for corner connectors and door lock panels. A complete door frame element with decorative cladding and rebate cladding is machined in one set-up. A complete frame can thus be machined in approx. 2.5 - 3 min. Machining equipment can be individually adapted to the customers requirements.

4-color format: 212 x 360 mm<br><br><br>Still in operation: Yes<br>

Hydr. Re-entry press, pressure line max. 50 t, table 600 x 550 mm >>

McIntyre Euro-strip 500 Cable Stripper The perfect bench-top cable stripper. Compact and efficient The Euro-strip 500 is one of the smallest in the range and is a low energy, large capacity unit that is easy to move around a yard. The Euro-strip Cable strippers are designed for simple, dependable operation without the need for constant adjustment, which suits all different material sizes. Taking up minimal space and emitting very low noise, the Euro-strip 500 will prove to be a valuable addition to your business.

Foot pendulum press

RECON Part Number: 103178 Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list.

Drying oven, tempering oven Caltherm 200 C For sale in excellent condition, CALTHERM manufactured air-mixed multi-purpose Convection oven heat treatment oven electrically heated oven with one chamber, with air mixing manufacturer: Caltherm J7172 year of manufacture: 2011 internal dimensions: width: 300cm height: 200cm length: 185cm over design temperature:200 °C Test Temperature: 200 °C Time to get to set point: 45 min number of elements: 12x 3,6kw fan motor: 15kw Total recommended Power supply of plant : 100A Type of temperature control: West 6400 external dimensions: width: 430cm length: 330cm height: 300cm weight: ca 4800kg

Offer oil level probe for sale.

Raisin washing machine, Fabr. Ernens, Type Junior

Recon Part Number: 179555 Series C Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, gate valve -Manufacturer: ARI, butterfly valve ZESA with handwheel -Connection: DN200 -Quantity: 1 piece -Dimensions: 330/120/H500 mm -Weight: 14.5 kg

Oil-water separation system, condensate separator, oil and water separator, oil separator, oil/water separator, air compressor oil-water separator -Manufacturer:BEKO, air compressor oil-water separator -Type: 30/0.8Mpa -Dimensions: Ø 360 x 1220 mm -Weight: 24 kg

Oil-water separation system, condensate separator, oil and water separation apparatus, oil separator, oil/water separator, air compressor oil-water separator -Manufacturer: Jorc, oil-water separator -Type: AIRGROUP-SEP 30 -Dimensions: 970/440/H900 mm -Weight: 56 kg

Manufacturer: Explosion geschützte Leuchten, Type: Jung Leiuchten, FREETEXT1: 2 Stück , FREETEXT2: 32 cm breit 86 cm lang/Einbautiefe 13 cm, FREETEXT3: geeignet für Spritzraum,

Manufacturer: Josting, Type: Ersatzmesser Fuznierschere, FREETEXT1: Messer länge 2950 mm, FREETEXT2: Rückenhöhe 80 mm, FREETEXT3: Bohrabstand mitte 15, FREETEXT4: Bohrabstand 110,

Oil filter to suit Lubrification circuit JONES - SHIPMAN, Model 540X, Model 1400X, Information about technical data are not binding., Machine available subject to prior sale.

Super Loadmaster SL1500 was the last series to be originally built by Chaseside., in 1968 the factory was sold to JCB, although this series continued to be built by JCB until 1972., Leyland Power plus engine, Power shift gearbox was installed as standard for the first time,, Payload 2,700kg, 137hp

Key data: 5500 mm, 1127 , 70

Screw diameter: 70 mm Injection weight in polystyrene: 1127 g Clamping force: 5500 kN Screw diameter: 70 mm Stroke volume: 1239 cm³ Injection weight in polystyrene: 1127 g/hp Injection pressure: 1,990 bar Clamping force: 550 t Lights Tie bar spacing H x V: 920 x 830 mm Tool installation height - min.: 350 mm Opening distance: 750/1300 mm Microprocessor control: KEBA 2880 Screen text: German Instruction manual: German FHK interface for robots: Euromap 67 Core pull: 4x Without material hopper / without water battery: -/- Pump drive power: 55+4 kW Total connected load: 95.4 kW Total weight: 21,000 kg Total size: 7.5 x 2.5 x 2.6 m Payment terms: 100 % before taking over the machine, purely net

This LINYI JIANZHONG WOOD MACHINERY JJC-CP was manufactured in 2019. It features a maximum pressure of 500 tons, adjustable for various applications, and can handle filling sizes up to 1300 x 2500 mm. With a capacity of 6 batches per hour and a total weight of 12000 kg, this carcase press is CE marked, ensuring compliance with safety standards. Contact us for more information about this machine.

Model: JSO-IV-40-22TF Year: 2006 Condition: Used Serial Number: 0372PO183 Stock Number: 1180G Belt width: 40 inch, 1010 mm Automated Clean In Place (CIP) Continious hot water, single pass, belt washer With Stein Humitroll moisture monitor and control Heating thermal fluid, 2 x 460kW Steam:max 2 x 545 kg/hr Compressed air: 6 - 10 Bar Power: 3 x 400V, 50Hz, 63kW Dimensions: 22500 x 3000 x 3000 mm

Pretzel oven Jufeba LN2 with new heaters and some new parts. - Pretzel oven Jufeba LN-2 - with mesh band - Oven is made entirely of stainless steel - a maximum of 200 pretzels per hour - with salt sprinkling ( Salzerwelle) - Oven lighting - With salt drip tray - Voltage 400 volts - Machine weighs approx. 70kg - Power 7.3 kW - Operating voltage 400 volts - Dimensions of the oven : W/D/H 820x870x850 mm For details, see pictures.

Pieralisi Used Complete Line Jumbo 3 2000 for oil production - 3 tons per hourTechnical Specifications & Performance DataThis second hand complete oil production line is engineered for continuous olive oil extraction with industrial reliability and efficiency. Designed and manufactured by Pieralisi, the JUMBO 3 configuration delivers consistent throughput for food-grade processing and can be integrated downstream with bottling equipment for industrial packaging operations.Manufacturer: PieralisiModel: JUMBO 3Production capacity: 3 tons per hourApplication: Edible oil extraction and clarificationLine composition: Leaf remover, washer, crusher, malaxers (7 units total), decanter, separator, conveyorsYear of manufacture: 2000Configuration: Complete process line, suitable for integration with a used bottling line for final packagingAdvanced Automation & Control SystemsThe Pieralisi JUMBO 3 p ...

For sale is a radiator module from JCB with intercooler and engine radiator from 2021, the radiator is unused. Condition: as good as new (only test run in the factory) JCB Part Number: 320/04847 Total Part Number: MN422200-03300B Case Part Number: MN122110-6013 Water Chiller Part Number: MN422135-0410 Intercooler Part Number: MN127100-4310 F4KAKT1845 Intercooler also fits John Deere and Yanmar We have other parts from JCB and Mitsubishi available If you have any further questions, please do not hesitate to contact us!

Good day We hereby offer you a used cable rewinding system (cable rewinding system) with length measuring device, for picking and winding cables to other drum diameters. Manufacturer Jakub Thaler GmbH, Germany Type KU-07 PPS Type Meter ME01 Year of construction 2019 Operating hours only 3,550 hours Load capacity 10,000 kg Usable cable diameter 10 – 80 mm Measurement accuracy +/- 0.5% Min. drum diameter 500 mm Max. drum diameter 2,800 mm Max. drum width 1,750 mm Drive power 5.5 kW Flushing speed 1 – 85 m/min. Hint: The aforementioned technical data have been taken from the operating instructions, brochures of the manufacturer or other sources, for which we cannot assume any liability for the correctness and completeness. Scope of delivery: Cable rewinding system with length measuring device Stratification trestle with length measuring device Cable Reel  ...

Technical data of the pallet rack crossbar: Shelving system: Jung Heinrich Type: Delta The scope of delivery includes: 01x Pallet rack trusses, used Material colour: yellow Box profile: 120 x 50 mm Truss type: HN120|30 Agraffe: 3 HK (hook) Weight / piece: approx. 22.50 kg Clear width: approx. 2,700 mm Max. load per pair of trusses 3,000 kg, with the same weight. distributed load. 02x Locking pins, used Design: compl. galvanized For securing the longitudinal members General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Rolling milling machine Koepfer 153 A/CNC Manufacturer Jos. Koepfer & Söhne GmbH Type 153 A/CNC Built in 1988 Machine No. 153199 Technical data Largest Module 2 Distance workpiece tool axis max. 4- 87 mm max. workpiece diameter - without magazine 142 mm - with magazine 80 (100) mm max. milling length 150 mm max. length workpiece - without magazine 300 mm - with magazine 220 mm min. number of teeth 3 min. screw gait number 1 Main spindle through- 33 mm Hole Mounting hole for 50 mm Jig max. cutter diameter 70 mm max. cutter width - Universal milling head 63 mm - Shifting milling head 71 mm max. axial cutter shift - Universal milling head 40 mm - Shifting milling head 44 mm 35 Longitudinal feeds 0.1 -5.0 mm /WU 10 cutter speeds 210-1680 /min Control (2 axes) CNC Drive power 2.2 kW Weight approx. 2400 kg Available immediately Location  ...

R23801/12 JAGENBERG Roller cutter Model: Vari Major Built: 1974 Width: 3,800 mm Materials: - coated paper, glossy and matte, grammage from 50 to 250 g/m2. max. speed: 1,500 m/min. for paper 250 g/m2 (The speed depends on the quality and grammage of the paper.) max. unwinding diameter: 2,500 mm max. winding diameter: 1,525 mm min. cutting width: 100 mm Number of upper knives: 6 Winder: 5 Single Winder max. roll width: 1,730 mm min. roll width: 450 mm max. unwinding diameter: 1,525 mm min. unwinding diameter: 300 mm 600 mm max. roll weight: 35 kN Available: immediately

<br>Machine completely over-recovered and repainted; Slitter Rewinder with pneumatic unwinding and winding gate, shaft, electrical lateral adjustment, working width 1320 mm, discharged diameter 1300 mm, core diameter 76 mm pneumatic brake Ortlinghaus, new upper and lower knives<br><br>Still in operation: Yes<br>

Type: 62416, rotary wheel valve with pre-valve flat slider, drive via spur gear motor with 3 kW / 42 rpm. Little ran.

<br>Working width: 1320 mm, outside diameter 1300 mm, inner diameter 70-155 mm, shaftless discharge discharge with lifting platform for nut rollers, upwinding with pneumatic extension shaft and mechanical device for finished rolling, lifting core inner diameter 76 mm, machine in production<br><br><br>br>

R23801/12 JAGENBERG slitter rewinder model: Vari Dur age: 1974 Net width : 3.800 mm materials: - coated paper, gloss and matt, grammages from 50 to 250 g/m². max. speed: 1500 m/min. for paper of 250 g/m² (The speed depends on the quality and the grammage of the paper) max. unwinding diameter: 2.500 mm max. winding diameter: 1.525 mm min.cutting width: 100 mm N° of upper blades: 6 Unwinder: 5 singles unwinders max. width of reels: 1.730 mm min. width of reels: 450 mm max. unwinding diameter: 1.525 mm min. unwinding diameter: 300 mm (from 900 to 1700 mm of net width) 600 mm (from 450 to 900 mm of net width) max. weight of reels: 35 kN Available: sofort

working width 7.400 mm Still in operation: Yes Available: sofort

Working width: 1320 mm, unwinding outer diameter 1300 mm, unwinding inner diameter 70 - 155 mm, shaftless unwinding with lifting platform for mother reel, upwinding with pneumatic expansion shaft and mechanical lifting up device for finished reel, core inner diameter 76 mm, machine in producion

Machine completely reconditioned and repainted; Slitter rewinder with pneumatic unwinding and rewinding shaft, electrical lateral adjustment, working width 1320 mm, unwinding diameter 1300 mm, core diameter 76 mm, pneumatic brake Ortlinghaus, new upper and lower knives Still in operation: Yes

R26081/12 Jagenberg rewinder model: VII age: 1963 size: 1600 mm available: immediately material: paper and foil sleeve inner diameter:70 mm speedt: max. 500 m/min about 10 knives Available: sofort

Technical data: Max load: 60 to. Container diameter: 500-4000 mm Rotation speed: 130-850 mm / min Roll diameter: 400 mm Roll width: 210 mm

RECON Part number: 0206 9704 Cast: 0206 9703 Engine 3 with new bushings ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us