j o r used for sale

This 3-axis PHENIX MD JET 1530 was manufactured in 2021. It features a spacious 1500 x 3000 mm table and a powerful 30HP hyperthermal pump capable of 4100 bar pressure. The machine has 1290 hours of operation and includes essential components such as a pump, tank, filter drain, and a salt softener. If you are looking to get high-quality waterjet cutting capabilities, consider the PHENIX MD JET 1530 machine we have for sale. Contact us for further details.

Jrion & Denz longitudinal saw Edging saw longitudinal circular saw Type HMS 15 Cutting length 3400 mm Cutting width 650 mm Cutting height maximum 120 mm Width stop can be adjusted motorically at the touch of a button Saw motor 11 kW Hydraulic pump feed 1.5 kW Saw blade feed speed infinitely variable 1 – 60 m/min. Saw blade return 60 m/min. At full capacity of the maximum cutting height of 120 mm, the maximum cutting length is 3200 mm. Saw blade diameter maximum 450 mm Cutting height for saw blade diameter 400 mm, 105 mm Saw blade bore 30 mm Extraction connection diameter 200 mm was mainly used to cut 80 mm thick planks Saw is activated via footswitch Rated current 23 A, frequency 50 Hz Instruction manual included Saw blades included 2 pieces diameter 400 mm, 4 pieces 450 mm Good, ready-to-use condition Machine Dimensions: 5750 mm x 1700 mm x H 1200 mm

Coolers for Glunz+Jensen Plate Developing Machines; Model 8735001001; cleaned and tested; suitable for Glunz+Jensen plate development machines. Chiller for plate processors Glunz+Jensen; Model 8735001001; cleaned and checked; used for Glunz+Jensen plate processors.

Key data: 1064 KW, 10500 V

Model:Jenbacher J320 Year: 2020 Fuel: Natural gas Running time: 0 Condition: Brand new, just installed and never used Quantity: 3 units Location: Asia Accessories: Includes control cabinet, cooling system, muffler Price is USD310,000 per unit

Used machine Grinding height 340 mm Belt speed 22 m/s Table width 1,400 mm Table length 2850 mm Sanding belt length 7,800 mm Sliding range 950 mm Weight approx. 1200 kg

Veneer Scissors Brand: Josting Model: EFS 3200 Cutting length: 3200 mm Two-hand control, no light barrier Rear stop with handwheel adjustment

faceplate diameter: 1400 mm swing diameter: 1600 mm turning height: 1200 mm turning speed range - milling: 1 - 240 U/min Control: Siemens SIN 820T ram head - cross travel: 1000 mm total power requirement: 55 kW weight of the machine ca.: dimensions of the machine ca.: m A.T.C. 12 positions Tooling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Qty. 1 Second-hand board paper mill Mfc.: JUNG KWANG, NYM Machinery, Built: TBA Stopped: 2017 Type of Machine: Multi Cylinder Mold ( easy Former ) Grade of paper: Board paper , Liner board paper Basic Weight: 180 g/m2 ~ 550 g/m2 Slice Width: 3150 mm Operation Speed: 150 ~ 50 m/ Min. Production capacity : 130 ~ 100 T / day Current condition: installed on foundation

Offer 24 camshaft tappets with the partnr. 483182 for sale.

This 3-axis Stratasys J55 Prime was manufactured in 2021. It features a build volume of up to 22,000 cm² and a maximum part size of 1,174 cm², allowing for versatile 3D printing capabilities. With a layer thickness of 18 microns, it produces high-quality smooth surfaces and supports over 640,000 color combinations. If you are looking to get high-quality 3D printing capabilities, consider the Stratasys J55 Prime machine we have for sale. Contact us for further details.

Biete Woodward Stellgerät mit der Teilnr. 340597 for sale.

Offer 12pcs. Spark Plug Plug with the Part. 578731 for sale. 1piece is defective above, see photos.

Offer a starter with the part. 229312 for sale.

pressure: 30.0 t chamfer lenght: 800 mm back stop - adjustable: max. 420 mm stroke of upper beam: 100 mm dayligth: 310 mm working feed: 10.0 mm/sec return speed: 12.0 mm/sec Control: VISION 120 oil volume: ca. 38.0 l voltage: 380 V total power requirement: 4.5 kW weight of the machine ca.: 890 kg dimensions of the machine ca.: 1250 x 950 x 1900 mm current new price approx. 24.000 euros special price on request Equipment: - electro-hydraulic NC press brake - easy to operate - UNITRONICS VISION 120 NC control system for press depth back gauge (Y X axis) - NC electro-motorized back gauge (X axis) Input of target/actual value possible 2x manually adjustable stop fingers - Operation front right - Many different insert/bending tools Top tool holder : AMADA/PROMECAM - 1x freely movable foot switch - EMERGENCY OFF button at the front - Rear safety device - operating instructions The data ...

Offer 3x Ignition Box MIC950 for sale. Also to be handed in individually.

Offer 2pcs gas mixers for sale. One gas mixer is complete, the other lacks the servo motor.

- Digital read out system position slides - 5 stones and flanches - Coolant and Filtration system - CE Mark - Levelling pads included  - Full set off books 

Complete can filling and closing line for liquids (nutrition) in 250 gram aluminium cans. Product: nutrition liquids. Formats: diameter 65 mm, height: 90 mm, filling weight 250 gram. 24x per box. Capacity: up to 500 / 420 cans per minute (30.000 / 25.000 per hour) for different parts of the line (with automatic palletiser) but the last year reduced to 325 cans per minute (19.500 per hour) because of manual palletising of the carton boxes on a pallet. Dismantling date: March / April 2026., Line exisiting out of:, 1. Preformed can de-palletiser machine, separate layer by layer from the pallet including lid sorting unit., Manufacturer: van Uitert B.V., Year: 1996, Machine number: D05-11399-01, Serial number: 1996.07.005, Installed power: 10 kW - 400 V - 50 Hz, Consumption of air: 3 Nm3/h, Weight: 2.500 kg, Capacity: up to 500 cans/min = 30.000 cans/h, Control panel with Danfoss VLT frequenc ...

Unused James Walker spare seals (.jameswalker.biz). For details of the seals, see photos., Type of Machine: Spare parts processing equipment

Single jacketed tank with an propellor agitator. Volume: liter. Motor of the propellor agitator: 0,18 kW - 380 V - 50 Hz - 420 rpm. Stainless cover of the motor. Manhole with breather on top. Level indicator in top. Spraybowl for CIP cleaning. 3 legs. Inlet from the side. Outlet in the bottom center. Internal diameter 46 cm, internal height 72 cm. Total dimensions: 48 x 48 x 150 cm., Type of Machine: Process tank, Volume: 120 liter, Double jacketed: No, Insulation: No, Type of agitator: From the top, out of hte center, placed propellor agitator, Motor of agitator: 0,18 kW, CIP Spray bowls: Yes, Manhole: Yes, Number of feet: 3, High / Low Level sensors: Yes, Internal diameter: 46 cm, Internal height: 72 cm, Total outside diameter: Ø 50 cm, Total outside height: 150 cm, Weight: 60 kg

We sell a Janssen biscuit machine with 10 rollers. A new belt and new transport belts were installed. The machine is in bakery condition

sheet width: 3000 mm plate thickness: 2,0 mm distance between columns: 3140 mm daylight opening: 80 mm total power requirement: kW weight of the machine ca.: 1,45 t dimensions of the machine ca.: 3,8 x 1,5 x 1,6 m Pneumatic segment bending machine - Manual backgauge max. 830 mm - Bending angle preselection via limit switches The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table fat maker Jufeba T 01 2 immersion grids with draining tray and steam lid Grease pan heating manual Connection 400V, 16A-CEE plug Used device cleaned

Frisch Spritz Matic Set 6 Jet Apricot and glazing equipment Cake glaze and frondant 2 material containers 2 spray stations Connection 400V, 32A-CEE plug Used appliance from the bakery

Used Janssen Forming Rollers for Small BiscuitsProduct DescriptionManufacturer: JanssenWidth 240mmSee pictures for details.

Janssen Forming Rollers for Small PastryProduct descriptionManufacturer: JanssenType: CrescentWidth 240mmSee pictures for details.

used Janssen forming rollers for biscuitsProduct descriptionManufacturer: JanssenType: German MännchenWidth 240mmSee pictures for details.

Used PRETZEL BAKING MACHINE Jufeba LN 2Manufacturer: JufebaType: LN 2Power up to max.200 pieces/hourStainless steel versionDimensions: 820 x 870 x 800 mm, WxDxHAnschluss 400V, 7.3, kW, 16A-CEE plugThe Jufeba LN 2 enables the forming, baking and dispensing of pretzels in a continuous automated process. The machine is user-friendly and has various settings to produce different types and sizes of pretzels. By using high-quality materials and precise technology, the Jufeba LN 2 guarantees consistently high quality

Pastry forming machine Janssen FM 128 Product description Manufacturer: Janssen &, Sohn Type: FM 128 / K4 A Year of construction: 1979 Condition: used, functional, bakery condition Working width: 250 mm Incl. forming rollers (s.b.) Mobile undercarriage connection: 220 / 380 V See pictures for details.

Manufacturer : JerosType : 5015/828400Volt 50Hz 1,5kW 4,4AZto clean 2-edged baking and perforated trays.For sheet width 78cmchassis completely made of stainless steela dirt drawer made of stainless steelFor 78x58cm wide trays on rollsDetails see picture

Jelly spraying machine - is used - Manufacturer: Bakon - Model: Jelly 2000 M (G) - Year of construction 2004 - Exterior Dimensions W.: 48 cm, D.: 48 cm, H.: approx. 110 cm For details see pictures.

Pastry Forming Machines Forming Rollers 5 pieces we have in stock Dimensions 58.5cm x 12.5cm Details see picture

Bread Slicer Machine Gate JAC Tabletop Device Manufacturer : JAC Model : MCO 420/11 mobile 240 Volt Details see picture

 Bread Slicer Gate JAC Manufacturer : JAC Model : BEM 450/10 mobile 400 Volt Cutting width 10mm Details see picture approx. 10 pieces we have in stock

Overview  This bottle unpacker was manufactured in 1982 by German company Joha. The machine was part of a bottling line operating at 2,500 bph and is immediately available. Technical data Capacity: Part of a line running at 2,500 bph Formats: Prepared for 0.33 L Longneck Unpacking head: Packing head for 24 bottles in a modular crate

Grinding dimensions X/Y: 600mm/305mm, max. workpiece height: 350mm, feed rate X: 24m/min, feed rate Y/Z: 2m/min, machine dimensions X/Y/Z: approx. 3000mm/2700mm/2500mm, weight: approx. 3200kg, control: Siemens Sinumerik. The control has a circuit board defect. Documentation vorhanden. An inspection on site is possible.

For Sale: Jenbacher J620 GS-E12 – year 2013 Power output: 4277 kVA The unit was fully overhauled at 50,000 operating hours and has since run for approximately 36,000 hours. Included equipment: Control panels Transform Gas line Dry cooler Complete installation in good operational condition. Loaded now in France

The system produces pressready aluminium plates, without the use of chemical processing, in a daylight environment suitable for commercial printers, quick printers and inplants, small and midsize newspapers and book printers. The PlateWriter 3600 Pro is based on a new technology that takes inkjet platemaking to a completely new level in productivity and usability. The PlateWriter 3600 Pro is based on the wellknown and stable solvent ink technology (same as used in the PlateWriter 2000/2400 systems) ensuring increased stability and reliability in day to day production operations. Furthermore the PlateWriter 3600 Pro is introduced in a modern design with easy access for cleaning and maintenance. This makes the user experience even better than the earlier PlateWriter models. PlateWriter 3600 Pro is an enhanced format model offering landscape plate loading for an even higher throughput speed ...

Three identical Certuss steam generators are available. Year of manufacture: 2008/2009/2010, steam output: 600kg/h, pressure vessel volume: 42.9l, set pressure: 10bar, test pressure: 57bar. Machine dimensions X/Y/Z: 1650mm/900mm/2000mm, weight: approx. 950kg. Documentation available. An on-site inspection is possible.

One used complete mesh ( standard, special and engineered mesh ) for sale, exesting of: One used JAGER SCHLATTER Superflex mesh welding line: The Superflex system processes all materials used in the reinforcing mesh industry and offers maximum design freedom with the programmable mesh linear extension. The system is equipped with motorized, infinitely adjustable compact welding groups that automatically adapt to the geometry of the next mesh. This feature enables seamless transitions and quick adaptation to changing production requirements. Variable cross wire spacings can be precisely implemented, making the system ideal for the production of list and special mesh. This versatility gives companies a clear advantage in the reinforcing mesh market and enables economical production with a high degree of flexibility. One used Progress MSR2 straightening/cutting machine is a high- ...

Fully Functional Used Reach Truck Stacker Material Truck Manufacturer: Jungheinrich Type: ETV 16 GE Year of Make: 1988 incl. Jungheinrich Voltronic-P charger Location of the machine: 74219 Möckmühl The machine can be viewed and tested on site. The forklift works perfectly. You can make an appointment for a viewing at any time. We would love to hear from you. We will be happy to answer any questions you may have at any time. We are looking forward to a good cooperation and thank you for your interest in advance.

Key data: 120 KW, 150 kVA, 400 V

Brand SDMO Model: J165 Year of Make: 2012 Serial Number: On request Operating hours (read) Low hours Capacity (KvA) 150 - 174 ( 60Hz) Capacity (Kw) 120 - 139 ( 60Hz) Engine brand John Deere Engine model 6068HF120 Fuel Diesel Alternator brand Leroy Somer Alternator model LSA44.2M95J 6/4 Voltage 230-400 Frequency (Hz) 50 - 60 RPM 1500 - 1800 ( 60Hz) Amperes (A) 228 Dimensions LxWxH (mm) 2550 x 1110 x 1500 Weight (Kg) approx. 1500 Quantity in stock 1 Made in France Comments Low hours ex emergency set in good working order

weight max. in kg: 1000 kg fork length: 1250 mm stroke height: 1600 mm high: 1940 mm weight of the machine ca.: 0,4 t dimensions: 1,69 x 0,78 x 2,09 m Pallet truck with - new 12-volt battery - charger - electric lift - manual drive The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 1000 kg fork length: 1150 mm stroke height: 3200 mm high: 2060 mm weight of the machine ca.: 0,8 t dimensions: 1,95 x 0,86 x 2,06 m Pallet truck with inklude charger ve The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

with PKO diameter range 3-8 mm number of dies 3 number of stations (incl. cut off) 4 cutting length 70 mm shaft length under head 12-60 mm output - pieces/min 300 press power 28 t

workpiece length: 100 mm swing diameter: 80 mm number of spindles: 2 Control: FANUC 31i-B5 workpiece weight: 2,00 kg centre height: 170 mm grinding wheel diameter: 100 mm grinding wheel hole diameter: 32 grinding wheel width max.: 20 peripheral speed: max. 125 m/sec passage of steadyrest: 45 - 60 mm total power requirement: 75,00 kW weight of the machine ca.: 25,00 t dimensions of the machine ca.: 5,00 x 3,50 x H3,50 m Cam grinding machine for Cam-Pieces with FANUC 31i-B5 control, loading/unloading unit, CO2 extinguishing system, for CBN grinding wheel, tailstock, steady, diamond wheel dresser mounted on the dressing spindle, Wheelhead variant 12 (two grinding spindles can be moved separately). The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece length: 100 mm swing diameter: 80 mm number of spindles: 2 Control: FANUC 31i-B5 workpiece weight: 2,00 kg centre height: 170 mm grinding wheel diameter: 100 mm grinding wheel hole diameter: 32 grinding wheel width max.: 20 peripheral speed: max. 125 m/sec passage of steadyrest: 45 - 60 mm total power requirement: 75,00 kW weight of the machine ca.: 25,00 t dimensions of the machine ca.: 5,00 x 3,50 x H3,50 m Cam grinding machine for Cam-Pieces with FANUC 31i-B5 control, loading/unloading unit, CO2 extinguishing system, for CBN grinding wheel, tailstock, steady, diamond wheel dresser mounted on the dressing spindle, Wheelhead variant 12 (two grinding spindles can be moved separately). The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: ~ 700 mm width: ~ 600 mm height: ~ 2.000 mm Vollmer Junior B automatic bandsaw sharpener for sharpening bandsaw blades. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine type: Cleaning system aqueous Make: LPW Type: PowerJet 670T4 Year of Make: 2010 due to a move and the lack of use, the cleaning system is sold very cheaply. Original price approx. 450.000,00€ The system has two working chambers and is suitable for demanding cleaning tasks, including the application of corrosion protection on an aqueous basis. The machine ran for the last time in 2023 and requires major maintenance before recommissioning.

End mill, indexable insert milling cutter, hedgehog cutter, tool holder, milling holder, milling tool, cutter head -Handover: in its current condition as inspected -Cutting board: partially slightly damaged, see photos -Reversible plates: mostly missing, see photos -Type: 45-PP-160-140-10 Ø 160 mm 3 pieces -Type: 45-PP-125-113 Ø 125 mm 1 piece -Type: 45-PP-125-113-9 Ø 125 mm 1 piece -Type: 90-PP-100-22-8 Ø 100 mm 2 pieces -Type: 75-PP-080-37-6 Ø 80 mm 1 piece -Type: 75-PP-080-37 Ø 80 mm 1 piece -Dimensions: 395/295/H145 mm -Weight: 29 kg