j o r used for sale

Key data: 2681 V, 6300

For sale Jenbacher 616 2.6MW CHP Generating Set Make and model: Jenbacher 616 GS-F101 Fuel: Natural Gas Frequency: 50 Hz Scope of supply: Complete CHP Generating set including engine, alternator, base frame, control pane (DIA.NE XT3), exhaust gas heat exchanger, silencer, radiator, gas line and ancillaries. Available for sale from Gas Engine Exchange . Please check our full range of equipment at gasengineexchange.com.

Key data: 4400 KW, 6300 V

we can offer 1x Genset Jenbacher 624, 4400 KW 50HZ 6300Volt,Running hours about 59.000 hours all Service is done from Jenbacher up to 59,000 hours. General overholing 60.000 hour is not done. Building 2012 Engine can visit in Europe

Balestrini Junior Longitudinal Copy Milling Machine, Werkstrück length: 1,700mm Double milling cutter for copying milling work with stencil CE Year of manufacture 2001 PLC control defective.. needs to be renewed. Error! No release from the machine. English: Balestrini Junior Dual Copy Profile Shaper Routing Machine Part-length: max. 1700mm 2 shaper machines Template for workding machine does not working! PLS/ PLC Control broken. Machine does not start working. Engine works.

Key data: 220 A, 230 V

Manufacturer: Fronius Model: MagicWave 2200 Job G/F Type: TIG Welding Machine (AC/DC) Welding current range: 3–220 A Power supply: 230 V, 1~ Process: TIG/MMA Condition: used Location: Bremen

Key data: 1186 KW, 400 V

Jenbacher 416 Biogas CHP Generating Set Engine overhauled in Aug 2022 at 62.850 hrs. Model - Jenbacher 416 Hrs - 86,600 Year - 2014 Fuel - Biogas Capacity - 1186 kW HZ: 50 V: 400 Scope of supply: Engine, Alternator, Base Frame, Control Panel (Dia.Ne XT3) Gasline, Exhaust Gas Heat Exchanger, Water Plate heat Exchanger, Exhaust cooler, Ventilators, Piping and Cabling. Available for sale from Gas Engine Exchange . Please check our complete range of equipment at gasengineexchange.com

the machine can lap and polish. There are a lot of accessories, including 3 lapping discs, various polishing felts, many masks for samples, many fluids, etc.

Jac Bread Gate Bread cutter 9mm cutting thickness speedswitch with protective cover front and back Emergency stop switch 380V 50Hz on casters Height: 130cm Width: 60cm Depth: 60cm

Key data: 264 KW, 450 kVA, 400 V

Jenbacher Gas-CHP J 208 GS-C Gas electricity and heat generator from 1994 with 67,000 operating hours, CHP unit with control and silencer, additional parts. 1 available 253 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: Stamford HC 534C2, 450 KVA Manufacturer: Jenbacher Model: J 208 GS-C Type: Gas CHP Engine Serial Number: 21619 Engine power [KW]: 264 Electrical power [KWel]: 253 Speed [1/min]: 1,500 Year of Make: 1994 Hours: 67,000 Weight unit [kg]: 5,000 Dimensions LxWxH [cm]: 450 x 150 x 195 AC Generator Stamford HC 534C2 Manufacturer: Stamford Model No.: HC 534C2 Type: AC Synchronous Generator Serial number: 49059/2 Power [KVA]: 450 Voltage [V]: 231 / 400 Frequency [Hz]: 50 Current [A]: 649 Speed [1/min]: 1,500 Year of Make: 1994

Table dimensions X/Y: 400mm/800mm, max. workpiece height: 300mm, grinding wheel diameter: 300mm-350mm, weight: approx. 2000kg. An on-site inspection is possible.

Key data: 4401 V, 6300

Jenbacher J624GS, 4401 kw,6,9KV, 50Hz Used Genst from 2011 with about 25000 hours, all service is done from Jenbacher. redy for shipment , stay in a warehous, loading free on truck. from austria

1x Crankshaft for Jenbacher 624. No. 444990,444989,444988 1x Crankshaft for Jenbacher 624 No. 444990,444989,444988 1x from Stock Available

Key data: 4401 V, 6300

Jenbacher J624GS, 4401 kw,6,3KV, 50Hz Used Genst from 2011 with about 59000 hours, all service is done from Jenbacher. redy for shipment , stay warm in the Factory ,but can not start(no gas), loading free on truck. from south Europe 60.000 hours are not done. all service from Jenbacher up to 59000 houers whos done.

Johnford sv 45 H APC -x,y,z =1100x530x600 -6000 rpm -2 pallets, table size 1220x500 Year of construction : 02/2001 Electrified

Temperature control unit Jufeba TG 1-3 T Jufeba Model: TG 1-3 T Tabletop device with container Stainless steel Dry heating Manual temperature control Robust technology Connection 230V Used device cleaned with warranty + spare parts service Option: Maintenance contract Stainless Steel GM Tank Delivery Instruction & Commissioning

A double mitre saw from the Chinese manufacturer Mange Jixie with digital display is available. Power: 4.8kW, pressure: 0.8MPa, cutting length range: 480mm-6000mm, saw blade outer diameter: 500mm, inner diameter: 300mm, blade thickness: 4.2mm, number of teeth: 120, feed rate: 2-3m/min, blade speed: 2840rpm, weight: approx. 1800kg. An on-site inspection is possible.

Brand: JOVISA Model No.: HC-2/40 Year: 2011 Engine: 25 hp (18.5 kw) Refurbished 2020 Automatic vertical tying 40 tons of force 800x700 bales Weight:500 kg

Jesco JAGUAR 2260 — a CNC lathe machine. Type of machine: CNC turning lathe Specifications: - Manufacturer: Jesco Machinery Ltd. - Model: JAGUAR 2260 - Swing over bed: 560 mm - Centre height: 280 mm - Max turning length (distance between centres): 1500 mm - Spindle bore: 80 mm - Control unit: FAGOR 8060 - Country of origin: Taiwan The machine is in very good condition and has been used very little. Find more here - / Contact us at -

Key data: 637 KW, 1500 1/min

Natural gas operation Engine block incl. crankshaft, camshaft, pistons, connecting rods, wheel drive, vibration damper, turbocharger console

NEW, felling grab JAK 250 (up to 25 cm), for 5 - 11.5 t excavators,

Cone splitter JSK-350-MS01, splitting cone, drill cone, log splitter, 1x hydraulic earth boring device HBG-1500 (for mini excavator, tractor, front loader), 1x adapter, quick coupler MS-01 (for HBG-1500 and HBG-2000), 1x Jansen splitting cone, 1x jansen fixation adapter splitting cone

Working height 11 m, working range 6.8 m, load capacity 230 kg, 350° swivel radius, with additional knuckle boom on the work basket 180°, jib vertical working range 144°, total width 122 cm, transport height 201 cm, transport length 574 cm, machine weight 7100 kg

Fits John Deere 4500 Telehandler, John Deere Part Number: EQ503667

Manufactuer: JCM Model: DBD4600 Year of Manufacture: 2011 Condition : Good Find more here - / Contact us at -

Key data: 664 KW, 830 kVA, 400 V

Running hours 60,000

Scope:, - Gas line, - Control panel Diane XT3, - Transformer 690V to 20.000 V, - Table cooler, - Exhaust gas heat exchanger, - Common exhaust silencer, Total running hours : 41.700 hours, Hours since overhaul : 11.700 hours, KWe: 2682, Working hours: 11700

Recon Part Number: 350517 Cylinders 11-20 J 420 A-Version Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Recon Part Number: 349183 BR 4 A version Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

RECON Part Number: 189240/101477 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list.

Recon Part Number: 120345 Bosch 0 001 601 028 15 kW Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Recon Part Number: 115882 0.265-10.05F 312119 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Recon Part Number: 174497 0653 321 00 05 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Recon Part Number: 174344 0653 321 00 02 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Height=1.6 m, Overall length= 1.6 m, Overall width= 1 m, Producer: JAC condition: refurbished In store Made in Belgium Description Renovated slicer JAC EEM 450/11. Thanks to its dimensions it is suitable for bakeries, grocery stores. - easy to use - quiet operation - slice thickness 11 mm - blade oiling system - 400 Volt 50 Hz - maximum bread size (width x height) 30 x 16 cm - removable crumb collector - equipped with wheels

Height=1.612 m, Overall length= 1.127 m, Overall width= 0.75 m, Producer: Werner & Pfleiderer condition: Refurbished Made in Germany Description Dough divider Parta U2 is designed for processing wheat flour and kneading up to 50% of the mass of rye flour method of careful processing of the dough two dividing chamber low oil consumption weight range 150-900 g or 80-750 g hopper volume 120 l dimensions with hopper 1127x750x1612 mm power 1.1 kW renovated

Height=0.82 m, Overall length= 1.01 m, Overall width= 1.12 m, In store Made in Denmark Description Capacity of 800 – 1000 trays per hour 3 main brushes for cleaning made of polyamide 2 brushes for cleaning of perforated trays All brushes can be adjusted individually to prolong the lifespan Quick copuling system for the cleaning brushes. (Un-/mounting without tools). Easy fix-System for main cleaning brushes The whole machine can be cleaned with water External oil container with sight glass and circulation pump Mobil scrapings container

Offer 25359 Specifications: Cutting range at 90° around 250 mm - flat 275 x 180 mm - Mitre adjustable left Schnittb. at 45° around 200 mm - Schnittb. flat at 45° 190 x 180 mm - Schnittb. flat at 30° 130 x 110 mm - Material support height approx. 920 mm Saw blade dimensions 3100 x 27 x 0.9 mm Cutting speed infinitely variable 15 to 100 m/min hydr. Lifting – lowering the saw frame Upper stroke limit of the saw frame Cutting pressure infinitely adjustable 0 - 10 m/min hydr. Material vise Micro Spray Coolant Device - Total drive power 400 V / 2.2 kW - Space requirement approx. W 2400 x H 1600 x D 1800 mm - Weight approx. 1300 kg - 3 x roller conveyor 1500 mm

Clamping Force: 350 ton // Shot Weight (Max): 694 g

Clamping Force: 220 ton // Shot Weight (Max): 625 g

Screw Diameter: 92 mm // Throughput: 800 kg/h

Extrusion lines for strapping tapes

Output: 9000 U/h // Bottle Size: 200ml-2l

grinding wheel dia. x width: ca. 200 x 25 mm magnetic clamping plate: ca. 450 x 170 mm cross feed of the table: 200 mm revolutions of grinding spindle: 3000 U/min grinding wheel hole diameter: 51 mm weight: ca. 1300 kg : 0,001 - 0,013 mm grinding length: 600 mm Surface grinding machine Includes extractor 1 additional grinding wheel holder Machine was in occasional use until recently The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Format range: max. 940 mm, min. 50 mm Equipment: Longitudinal seam, folding bottom, double edge, electronic top gluing unit HHS X-pect, 8 channel with 3 application heads, disc underglue unit left, Pre-crusher right and left, kicker, counter, vibrator on the feeder, digital Position indicators, threading station, lower center feed in folding, pneumatic, intermittent press belt, cleaned, tested.

Center height: 150mm, max. grinding diameter: 300mm, distance between centers: 620mm, max. workpiece weight: 120kg, grinding head spindle swivel range: +45°/-15°, table adjustment: +/-8.5°, travel X/Z: 160mm/756mm, grinding wheel dimensions X/Y/Z: 400mm/63mm/127mm, grinding wheel speed: 45m/s, workpiece spindle speed: 700rpm. Machine dimensions X/Y/Z: approx. 3000mm/1850mm/1850mm, weight: approx. 3000kg. Including LTA extraction system and SBS wheel balancing device. The workpiece drive is disassembled and its completeness is unknown. Documentation available. An on-site inspection is possible.

JRIMAC Slitting Saw STANDARD -NEW- - Cutting length: up to 6,200mm - Cutting width: 420 - 2,120 mm - Motor power: 11/15 kW - Cutting height: 175 mm - Precise, clean cut - Cutting accuracy +/- 0.5 mm - Hold-down device with extremely strong slat protection, and extraction connection - PLC machine control - Stepless, frequency-controlled, power-stable feed motor - Convenient semi-automatic saw blade height adjustment - Stepless width stop adjustment - Saw blade quick clamping system "JRIMAC" - Front table support made of plastic or solid wood - Force-guided splitting wedge - Lower standard extraction duct installed ready for connection - CE compliant, dust tested - Processing of more than 12 different materials possible - Reliable spare parts and customer service

JRIMAC Slitting Saw "TOP" - NEW - · Cutting length 2200 - 9200 mm · Cutting width 420 - 2120 mm · Cutting direction left - right (on request right - left) · Cutting height max. 210 mm with high-quality saw blade Ø 620 mm. · Precise and clean cut due to strong, self-supporting welded construction of the machine stand. · Carriage guide via linear guides, with ball-bearing, maintenance-free rollers. · Safety beam mounted above the machine table with 6 mm thick slat protection. · Suction connection Ø 160mm installed at table height at top right and bottom left ready for connection. · Flexible and efficient working thanks to the 250 mm opening of the slat guard above the top edge of the table. · Stepless, frequency-controlled, performance-stable feed of the carriage. · The max. feed speed can be adjusted. · Automatic stepless saw blade height adjustment. · Stepl ...

A fully automatic side-seal strapping machine Joinpack is available. Load capacity: 50kg, speed: approx. 24rpm, strap width: 9mm/12mm/15mm, strap material: PP, strap tension range: 15kg/70kg, frame opening: 600mm/850mm, sealing height: 650mm. Machine dimensions X/Y/Z: approx. 1450mm/600mm/850mm, weight: approx. 300kg. Documentation available. An on-site inspection is possible.

1 JAMES HEAL type Wascator FOM 71 MP-Lab Standardised European Washing Machine, approved for IEC and ISO standarts, capacity 7 Kg, power consumption 5,4 KW, voltage 400V, 3N, 50 Hz, material stainless steel, dimensions 740x640x1080 mm, net weight 160 kg, made in Sweden. Machine is in an immaculate condition and looks like new.

1 JAMES HEAL Martindale abrasion resistance and pilling testing machine, 4 testing positions,

Manufacturer: JENZ Model: NZ 1600 Type of Machine : waste wood shredder Find more here - / Contact us at -